
+TIME REPRESENTATION
Top
+
 Libev represents time as a single floating point number, representing the
 (fractional) number of seconds since the (POSIX) epoch (somewhere near
 the beginning of 1970, details are complicated, don't ask). This type is
 called ev_tstamp, which is what you should use too. It usually aliases
 to the double type in C.
+
+
+GLOBAL FUNCTIONS
Top
+


+These functions can be called anytime, even before initialising the
+library in any way.


 	ev_tstamp ev_time ()
 	
@@ -144,7 +153,7 @@ requested operation, or, if the condition doesn't go away, do bad stuff
 types of such loops, the default loop, which supports signals and child
 events, and dynamically created loops which do not.
 If you use threads, a common model is to run the default event loop
-in your main thread (or in a separate thrad) and for each thread you
+in your main thread (or in a separate thread) and for each thread you
 create, you also create another event loop. Libev itself does no locking
 whatsoever, so if you mix calls to the same event loop in different
 threads, make sure you lock (this is usually a bad idea, though, even if
@@ -266,7 +275,7 @@ more generic mechanism.
 	

 		Can be used to make a call to ev_loop return early (but only after it
 has processed all outstanding events). The how argument must be either
-EVUNLOOP_ONCE, which will make the innermost ev_loop call return, or
+EVUNLOOP_ONE, which will make the innermost ev_loop call return, or
 EVUNLOOP_ALL, which will make all nested ev_loop calls return.
 	
 	ev_ref (loop)
@@ -435,14 +444,15 @@ in each iteration of the event loop (This behaviour is called
 level-triggering because you keep receiving events as long as the
 condition persists. Remember you can stop the watcher if you don't want to
 act on the event and neither want to receive future events).
-In general you can register as many read and/or write event watchers oer
+
In general you can register as many read and/or write event watchers per
 fd as you want (as long as you don't confuse yourself). Setting all file
 descriptors to non-blocking mode is also usually a good idea (but not
 required if you know what you are doing).
 You have to be careful with dup'ed file descriptors, though. Some backends
 (the linux epoll backend is a notable example) cannot handle dup'ed file
 descriptors correctly if you register interest in two or more fds pointing
-to the same file/socket etc. description.
+to the same underlying file/socket etc. description (that is, they share
+the same underlying "file open").
 If you must do this, then force the use of a known-to-be-good backend
 (at the time of this writing, this includes only EVMETHOD_SELECT and
 EVMETHOD_POLL).
@@ -462,7 +472,7 @@ EV_WRITE

Timer watchers are simple relative timers that generate an event after a given time, and optionally repeating in regular intervals after that.

The timers are based on real time, that is, if you register an event that -times out after an hour and youreset your system clock to last years +times out after an hour and you reset your system clock to last years time, it will still time out after (roughly) and hour. "Roughly" because detecting time jumps is hard, and soem inaccuracies are unavoidable (the monotonic clock option helps a lot here).

   ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);

The timer itself will do a best-effort at avoiding drift, that is, if you configure a timer to trigger every 10 seconds, then it will trigger at exactly 10 second intervals. If, however, your program cannot keep up with -the timer (ecause it takes longer than those 10 seconds to do stuff) the +the timer (because it takes longer than those 10 seconds to do stuff) the timer will not fire more than once per event loop iteration.

ev_timer_again (loop)

time = at (mod interval)

NOTE: This callback MUST NOT stop or destroy the periodic or any other -periodic watcher, ever, or make any event loop modifications. If you need -to stop it, return now + 1e30 (or so, fudge fudge) and stop it afterwards.

Also, this callback must always return a time that is later than the -passed now value. Not even now itself will be ok.

NOTE: This callback MUST NOT stop or destroy any periodic watcher, +ever, or make any event loop modifications. If you need to stop it, +return now + 1e30 (or so, fudge fudge) and stop it afterwards (e.g. by +starting a prepare watcher).

Its prototype is ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now), e.g.:

   static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
@@ -581,10 +590,13 @@ ev_tstamp now), e.g.:
 (that is, the lowest time value larger than to the second argument). It
 will usually be called just before the callback will be triggered, but
 might be called at other times, too.
+					NOTE: This callback must always return a time that is later than the
+passed now value. Not even now itself will do, it must be larger.
 					This can be used to create very complex timers, such as a timer that
 triggers on each midnight, local time. To do this, you would calculate the
-next midnight after now and return the timestamp value for this. How you do this
-is, again, up to you (but it is not trivial).
+next midnight after now and return the timestamp value for this. How
+you do this is, again, up to you (but it is not trivial, which is the main
+reason I omitted it as an example).

@@ -664,10 +676,10 @@ believe me.

`ev_prepare` and `ev_check` - your hooks into the event loop

`ev_prepare` and `ev_check` - customise your event loop

Prepare and check watchers are usually (but not always) used in tandem: -Prepare watchers get invoked before the process blocks and check watchers +prepare watchers get invoked before the process blocks and check watchers afterwards.

Their main purpose is to integrate other event mechanisms into libev. This could be used, for example, to track variable changes, implement your own @@ -678,16 +690,16 @@ them and starting an ev_timer watcher for any timeouts (many librar provide just this functionality). Then, in the check watcher you check for any events that occured (by checking the pending status of all watchers and stopping them) and call back into the library. The I/O and timer -callbacks will never actually be called (but must be valid neverthelles, +callbacks will never actually be called (but must be valid nevertheless, because you never know, you know?).

As another example, the Perl Coro module uses these hooks to integrate coroutines into libev programs, by yielding to other active coroutines during each prepare and only letting the process block if no coroutines -are ready to run (its actually more complicated, it only runs coroutines -with priority higher than the event loop and one lower priority once, -using idle watchers to keep the event loop from blocking if lower-priority -coroutines exist, thus mapping low-priority coroutines to idle/background -tasks).

+are ready to run (it's actually more complicated: it only runs coroutines +with priority higher than or equal to the event loop and one coroutine +of lower priority, but only once, using idle watchers to keep the event +loop from blocking if lower-priority coroutines are active, thus mapping +low-priority coroutines to idle/background tasks).

ev_prepare_init (ev_prepare *, callback)
ev_check_init (ev_check *, callback)

LIBEVENT EMULATION

Top

Libev offers a compatibility emulation layer for libevent. It cannot +emulate the internals of libevent, so here are some usage hints:

* Use it by including <event.h>, as usual.
* The following members are fully supported: ev_base, ev_callback, +ev_arg, ev_fd, ev_res, ev_events.
* Avoid using ev_flags and the EVLIST_*-macros, while it is +maintained by libev, it does not work exactly the same way as in libevent (consider +it a private API).
* Priorities are not currently supported. Initialising priorities +will fail and all watchers will have the same priority, even though there +is an ev_pri field.
* Other members are not supported.
* The libev emulation is not ABI compatible to libevent, you need +to use the libev header file and library.

+ +

C++ SUPPORT

Top

TBD.

AUTHOR

Top

TIME AND OTHER GLOBAL FUNCTIONS

TIME REPRESENTATION

GLOBAL FUNCTIONS

ev_prepare and ev_check - your hooks into the event loop

ev_prepare and ev_check - customise your event loop

LIBEVENT EMULATION

C++ SUPPORT

AUTHOR

`ev_prepare` and `ev_check` - your hooks into the event loop

`ev_prepare` and `ev_check` - customise your event loop