Add flattr widget to home page

[software/eventxx.git] / Doxyfile

diff --git a/Doxyfile b/Doxyfile
index 5a6a8d2b06b22217225264aceec654800ab6ece0..8fab6d4986b00dbde89e3021cc6d2b68697206fa 100644 (file)
--- a/Doxyfile
+++ b/Doxyfile
@@ -1,4 +1,4 @@
-# Doxyfile 1.5.1
+# Doxyfile 1.5.3

 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project


@@ -14,6 +14,14 @@
 # Project related configuration options
 #---------------------------------------------------------------------------
 
 # Project related configuration options
 #---------------------------------------------------------------------------
 

+# This tag specifies the encoding used for all characters in the config file that 
+# follow. The default is UTF-8 which is also the encoding used for all text before 
+# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into 
+# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of 
+# possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+

 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
 # by quotes) that should identify the project.
 
 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
 # by quotes) that should identify the project.
 


@@ -23,7 +31,7 @@ PROJECT_NAME           = eventxx
 # This could be handy for archiving the generated documentation or 
 # if some version control system is used.
 
 # This could be handy for archiving the generated documentation or 
 # if some version control system is used.
 

-PROJECT_NUMBER         = 0.5
+PROJECT_NUMBER         = 1.0.1

 
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
 # base path where the generated documentation will be put. 
 
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
 # base path where the generated documentation will be put. 


@@ -53,16 +61,6 @@ CREATE_SUBDIRS         = NO
 
 OUTPUT_LANGUAGE        = English
 
 
 OUTPUT_LANGUAGE        = English
 

-# This tag can be used to specify the encoding used in the generated output. 
-# The encoding is not always determined by the language that is chosen, 
-# but also whether or not the output is meant for Windows or non-Windows users. 
-# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
-# forces the Windows encoding (this is the default for the Windows binary), 
-# whereas setting the tag to NO uses a Unix-style encoding (the default for 
-# all platforms other than Windows).
-
-USE_WINDOWS_ENCODING   = NO
-

 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
 # include brief member descriptions after the members that are listed in 
 # the file and class documentation (similar to JavaDoc). 
 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
 # include brief member descriptions after the members that are listed in 
 # the file and class documentation (similar to JavaDoc). 


@@ -135,11 +133,19 @@ SHORT_NAMES            = NO
 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
 # will interpret the first line (until the first dot) of a JavaDoc-style 
 # comment as the brief description. If set to NO, the JavaDoc 
 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
 # will interpret the first line (until the first dot) of a JavaDoc-style 
 # comment as the brief description. If set to NO, the JavaDoc 

-# comments will behave just like the Qt-style comments (thus requiring an 
-# explicit @brief command for a brief description.
+# comments will behave just like regular Qt-style comments 
+# (thus requiring an explicit @brief command for a brief description.)

 
 JAVADOC_AUTOBRIEF      = YES
 
 
 JAVADOC_AUTOBRIEF      = YES
 

+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
+# interpret the first line (until the first dot) of a Qt-style 
+# comment as the brief description. If set to NO, the comments 
+# will behave just like regular Qt-style comments (thus requiring 
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+

 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
 # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
 # comments) as a brief description. This used to be the default behaviour. 
 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
 # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
 # comments) as a brief description. This used to be the default behaviour. 


@@ -179,8 +185,11 @@ TAB_SIZE               = 8
 # will result in a user-defined paragraph with heading "Side Effects:". 
 # You can put \n's in the value part of an alias to insert newlines.
 
 # will result in a user-defined paragraph with heading "Side Effects:". 
 # You can put \n's in the value part of an alias to insert newlines.
 

-ALIASES                = "libevent=<a href='http://monkey.org/~provos/libevent/'>libevent</a>" \
-       "eventxx=<a href=\"http://www.llucax.com.ar/~luca/eventxx/\"><strong>eventxx</strong></a>"
+ALIASES                = "libevent=<a href='http://monkey.org/~provos/libevent/'>libevent</a> " \
+                         "eventxx=<a href=\"http://proj.llucax.com.ar/home/eventxx/\"><strong>eventxx</strong></a> " \
+                        "home=http://proj.llucax.com.ar/home/eventxx" \
+                        "redmine=http://proj.llucax.com.ar/projects/show/eventxx" \
+                        "gitweb=http://git.llucax.com.ar/w/software/eventxx.git"

 
 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
 # sources only. Doxygen will then generate output that is more tailored for C. 
 
 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
 # sources only. Doxygen will then generate output that is more tailored for C. 


@@ -205,6 +214,11 @@ OPTIMIZE_OUTPUT_JAVA   = NO
 
 BUILTIN_STL_SUPPORT    = YES
 
 
 BUILTIN_STL_SUPPORT    = YES
 

+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+

 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
 # tag is set to YES, then doxygen will reuse the documentation of the first 
 # member in the group (if any) for the other members of the group. By default 
 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
 # tag is set to YES, then doxygen will reuse the documentation of the first 
 # member in the group (if any) for the other members of the group. By default 


@@ -254,6 +268,13 @@ EXTRACT_LOCAL_CLASSES  = YES
 
 EXTRACT_LOCAL_METHODS  = NO
 
 
 EXTRACT_LOCAL_METHODS  = NO
 

+# If this flag is set to YES, the members of anonymous namespaces will be extracted 
+# and appear in the documentation as a namespace called 'anonymous_namespace{file}', 
+# where file will be replaced with the base name of the file that contains the anonymous 
+# namespace. By default anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+

 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
 # undocumented members of documented classes, files or namespaces. 
 # If set to NO (the default) these members will be included in the 
 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
 # undocumented members of documented classes, files or namespaces. 
 # If set to NO (the default) these members will be included in the 


@@ -460,7 +481,15 @@ WARN_LOGFILE           =
 # directories like "/usr/src/myproject". Separate the files or directories 
 # with spaces.
 
 # directories like "/usr/src/myproject". Separate the files or directories 
 # with spaces.
 

-INPUT                  = eventxx
+INPUT                  = eventxx \
+                         README
+
+# This tag can be used to specify the character encoding of the source files that 
+# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default 
+# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. 
+# See http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8

 
 # If the value of the INPUT tag contains directories, you can use the 
 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
 
 # If the value of the INPUT tag contains directories, you can use the 
 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 


@@ -497,6 +526,13 @@ EXCLUDE_SYMLINKS       = NO
 
 EXCLUDE_PATTERNS       = 
 
 
 EXCLUDE_PATTERNS       = 
 

+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 
+# (namespaces, classes, functions, etc.) that should be excluded from the output. 
+# The symbol name can be a fully qualified name, a word, or if the wildcard * is used, 
+# a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        = 
+

 # The EXAMPLE_PATH tag can be used to specify one or more files or 
 # directories that contain example code fragments that are included (see 
 # the \include command).
 # The EXAMPLE_PATH tag can be used to specify one or more files or 
 # directories that contain example code fragments that are included (see 
 # the \include command).


@@ -555,7 +591,9 @@ FILTER_SOURCE_FILES    = NO
 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
 # be generated. Documented entities will be cross-referenced with these sources. 
 # Note: To get rid of all source code in the generated output, make sure also 
 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
 # be generated. Documented entities will be cross-referenced with these sources. 
 # Note: To get rid of all source code in the generated output, make sure also 

-# VERBATIM_HEADERS is set to NO.
+# VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH 
+# then you must also enable this option. If you don't then doxygen will produce 
+# a warning and turn it on anyway

 
 SOURCE_BROWSER         = NO
 
 
 SOURCE_BROWSER         = NO
 


@@ -681,6 +719,14 @@ HTML_ALIGN_MEMBERS     = YES
 
 GENERATE_HTMLHELP      = NO
 
 
 GENERATE_HTMLHELP      = NO
 

+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 
+# documentation will contain sections that can be hidden and shown after the 
+# page has loaded. For this to work a browser that supports 
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = NO
+

 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
 # be used to specify the file name of the resulting .chm file. You 
 # can add a path in front of the file if the result should not be 
 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
 # be used to specify the file name of the resulting .chm file. You 
 # can add a path in front of the file if the result should not be 


@@ -1013,7 +1059,7 @@ INCLUDE_FILE_PATTERNS  =
 # undefined via #undef or recursively expanded use the := operator 
 # instead of the = operator.
 
 # undefined via #undef or recursively expanded use the := operator 
 # instead of the = operator.
 

-PREDEFINED             = EVENTXX_BASE_FREE_FIX
+PREDEFINED             = 

 
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
 # this tag can be used to specify a list of macro names that should be expanded. 
 
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
 # this tag can be used to specify a list of macro names that should be expanded. 


@@ -1086,6 +1132,14 @@ PERL_PATH              = /usr/bin/perl
 
 CLASS_DIAGRAMS         = YES
 
 
 CLASS_DIAGRAMS         = YES
 

+# You can define message sequence charts within doxygen comments using the \msc 
+# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to 
+# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to 
+# specify the directory where the mscgen tool resides. If left empty the tool is assumed to 
+# be found in the default search path.
+
+MSCGEN_PATH            = 
+

 # If set to YES, the inheritance and collaboration graphs will hide 
 # inheritance and usage relations if the target is undocumented 
 # or is not a class.
 # If set to YES, the inheritance and collaboration graphs will hide 
 # inheritance and usage relations if the target is undocumented 
 # or is not a class.


@@ -1143,7 +1197,7 @@ INCLUDE_GRAPH          = YES
 
 INCLUDED_BY_GRAPH      = YES
 
 
 INCLUDED_BY_GRAPH      = YES
 

-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
+# If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will 

 # generate a call dependency graph for every global function or class method. 
 # Note that enabling this option will significantly increase the time of a run. 
 # So in most cases it will be better to enable call graphs for selected 
 # generate a call dependency graph for every global function or class method. 
 # Note that enabling this option will significantly increase the time of a run. 
 # So in most cases it will be better to enable call graphs for selected 


@@ -1151,7 +1205,7 @@ INCLUDED_BY_GRAPH      = YES
 
 CALL_GRAPH             = NO
 
 
 CALL_GRAPH             = NO
 

-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
+# If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will 

 # generate a caller dependency graph for every global function or class method. 
 # Note that enabling this option will significantly increase the time of a run. 
 # So in most cases it will be better to enable caller graphs for selected 
 # generate a caller dependency graph for every global function or class method. 
 # Note that enabling this option will significantly increase the time of a run. 
 # So in most cases it will be better to enable caller graphs for selected 


@@ -1188,31 +1242,23 @@ DOT_PATH               =
 
 DOTFILE_DIRS           = 
 
 
 DOTFILE_DIRS           = 
 

-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
-# large images.
-
-MAX_DOT_GRAPH_WIDTH    = 1024
-
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
-# large images.
+# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 
+# nodes that will be shown in the graph. If the number of nodes in a graph 
+# becomes larger than this value, doxygen will truncate the graph, which is 
+# visualized by representing a node as a red box. Note that doxygen if the number 
+# of direct children of the root node in a graph is already larger than 
+# MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note 
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

 
 

-MAX_DOT_GRAPH_HEIGHT   = 1024
+DOT_GRAPH_MAX_NODES    = 50

 
 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
 # graphs generated by dot. A depth value of 3 means that only nodes reachable 
 # from the root by following a path via at most 3 edges will be shown. Nodes 
 # that lay further from the root node will be omitted. Note that setting this 
 # option to 1 or 2 may greatly reduce the computation time needed for large 
 
 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
 # graphs generated by dot. A depth value of 3 means that only nodes reachable 
 # from the root by following a path via at most 3 edges will be shown. Nodes 
 # that lay further from the root node will be omitted. Note that setting this 
 # option to 1 or 2 may greatly reduce the computation time needed for large 

-# code bases. Also note that a graph may be further truncated if the graph's 
-# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH 
-# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), 
-# the graph is not depth-constrained.
+# code bases. Also note that the size of a graph can be further restricted by 
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

 
 MAX_DOT_GRAPH_DEPTH    = 0
 
 
 MAX_DOT_GRAPH_DEPTH    = 0