From f213eaa9d8bc2a003b3692ce67a85553ba445535 Mon Sep 17 00:00:00 2001 From: Leandro Lucarella Date: Wed, 27 Dec 2006 15:55:46 +0000 Subject: [PATCH] C++ wrapper for libevent. This is a simple, direct, one-header inline C++ wrapper for libevent. It's designed to be as close to use to libevent without compromising modern C++ programming techniques and efficiency (since all implementation is trivial and inline, theoretically, it imposes no overhead at all). --- Doxyfile | 1252 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ event | 718 +++++++++++++++++++++++++++++++ 2 files changed, 1970 insertions(+) create mode 100644 Doxyfile create mode 100644 event diff --git a/Doxyfile b/Doxyfile new file mode 100644 index 0000000..85bfa27 --- /dev/null +++ b/Doxyfile @@ -0,0 +1,1252 @@ +# Doxyfile 1.5.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = libeventpp + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = 0.1 + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, +# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, +# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, +# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. + +OUTPUT_LANGUAGE = English + +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for +# all platforms other than Windows). + +USE_WINDOWS_ENCODING = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = YES + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an +# explicit @brief command for a brief description. + +JAVADOC_AUTOBRIEF = YES + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = YES + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes +# will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to +# include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = YES + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = YES + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from the +# version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = event + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentstion. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. + +GENERATE_TREEVIEW = YES + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = NO + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = /usr/include + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = YES + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = YES + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a caller dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_WIDTH = 1024 + +# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_HEIGHT = 1024 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that a graph may be further truncated if the graph's +# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH +# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), +# the graph is not depth-constrained. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, which results in a white background. +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO diff --git a/event b/event new file mode 100644 index 0000000..acb02c1 --- /dev/null +++ b/event @@ -0,0 +1,718 @@ +#ifndef _EVENT_HPP_ +#define _EVENT_HPP_ + +#include // timeval (hack -> event.h don't include it) +#include // std::exception, std::invalid_argument, + // std::runtime_error, std::bad_alloc + +/** @mainpage + * + * @section Introduction + * + * The libevent API provides a mechanism to execute a callback function when a + * specific event occurs on a file descriptor or after a timeout has been + * reached. Furthermore, libevent also support callbacks due to signals or + * regular timeouts. + * + * libevent is meant to replace the event loop found in event driven network + * servers. An application just needs to call dispatcher::dispatch() and then + * add or remove events dynamically without having to change the event loop. + * + * Currently, libevent supports /dev/poll, kqueue(2), select(2), poll(2) and + * epoll(4). It also has experimental support for real-time signals. The + * internal event mechanism is completely independent of the exposed event API, + * and a simple update of libevent can provide new functionality without having + * to redesign the applications. As a result, Libevent allows for portable + * application development and provides the most scalable event notification + * mechanism available on an operating system. Libevent should compile on Linux, + * *BSD, Mac OS X, Solaris and Windows. + * + * This is a simple, direct, one-header inline C++ wrapper for libevent. + * It's designed to be as close to use to libevent without compromising modern + * C++ programming techniques and efficiency (since all implementation is + * trivial inline, theoretically it imposes no overhead at all). + * + * + * @section Usage + * + * The best way to explain how this works is by examples. TODO + * + * @author Leandro Lucarella + * @version 0.1 + * @par License + * This program is under the BOLA license (see + * http://auriga.wearlab.de/~alb/bola/) + * + */ + + +/** + * Namespace for all symbols libevent C++ wrapper defines. + */ +namespace event +{ + + +// All libevent C API symbols and other internal stuff goes here. +namespace internal +{ +#include +} + + +/// @defgroup exceptions Exceptions +//@{ + + +/** + * Base class for all libevent exceptions. + */ +struct exception: std::exception +{ +}; + + +/** + * Invalid event exception. + * + * This exception is thrown when passing an invalid event to a function, the + * reason is given in the what() description but it usually means that the you + * are making some restricted operation with an active event. + * + * If you hit this exception, you probably got a programming error. + */ +struct invalid_event: std::invalid_argument, exception +{ + + /** + * Creates an invalid event exception with a reason. + * + * @param what Reason why the event is invalid). + */ + explicit invalid_event(const std::string& what) throw(): + std::invalid_argument(what) + { + } + +}; // struct invalid_event + + +/** + * Invalid priority exception. + * + * This exception is thrown when passing an invalid priority to a function. This + * usually means you don't have enought priority queues in your dispatcher, so + * you should have allocated more in the constructor. + * + * If you hit this exception, you probably got a programming error. + * + * @see dispatcher::dispatcher(int) to allocate more priority queues. + */ +struct invalid_priority: std::invalid_argument, exception +{ + + /** + * Creates an invalid priority exception with a reason. + * + * @param what Reason why the priority is invalid). + */ + explicit invalid_priority(const std::string& what + = "invalid priority value") throw(): + std::invalid_argument(what) + { + } + +}; // struct invalid_priority + +//@} + + +/// Miscelaneous constants +enum +{ + DEFAULT_PRIORITY = -1 ///< Default priority (the middle value) +}; + + +/// C function used as callback in the C API. +typedef void (*ccallback_type)(int, short, void*); + + +/** + * Time used for timeout values. + * + * This timeout is compose of seconds and microseconds. + */ +struct time: ::timeval +{ + + /** + * Creates a new time with @p sec seconds and @p usec microseconds. + * + * @param sec Number of seconds. + * @param usec Number of microseconds. + */ + time(long sec = 0l, long usec = 0l) throw() + { tv_sec = sec; tv_usec = usec; } + + /** + * Gets the number of seconds. + * + * @return Number of seconds. + */ + long sec() const throw() { return tv_sec; }; + + /** + * Gets the number of microseconds. + * + * @return Number of microseconds. + */ + long usec() const throw() { return tv_usec; }; + + /** + * Sets the number of seconds. + * + * @param s Number of seconds. + */ + void sec(long s) throw() { tv_sec = s; }; + + /** + * Sets the number of microseconds. + * + * @param u Number of microseconds. + */ + void usec(long u) throw() { tv_usec = u; }; + +}; // struct time + + +/// @defgroup events Events +//@{ + +/** + * Basic event from which all events derive. + * + * All events derive from this class, so it's useful for use in containers, + * like: + * @code + * std::list< event::basic_event* > events; + * @endcode + */ +struct basic_event: internal::event +{ + + /** + * Checks if there is an event pending. + * + * @param ev Type of event to check. + * + * @return true if there is a pending event, false if not. + */ + bool pending(short ev) const throw() + { + // HACK libevent don't use const + return event_pending(const_cast< basic_event* >(this), ev, 0); + } + + /** + * Timeout of the event. + * + * @return Timeout of the event. + */ + time timeout() const throw() + { + time tv; + // HACK libevent don't use const + event_pending(const_cast< basic_event* >(this), EV_TIMEOUT, &tv); + return tv; + } + + /** + * Sets the event's priority. + * + * @param priority New event priority. + * + * @see dispatcher::dispatcher(int) + */ + void priority(int priority) const throw(invalid_event, invalid_priority) + { + if (ev_flags & EVLIST_ACTIVE) + throw invalid_event("can't change the priority of an " + "active event"); + // HACK libevent don't use const + if (event_priority_set(const_cast< basic_event* >(this), + priority)) + throw invalid_priority(); + } + + /** + * Event's file descriptor. + * + * @return Event's file descriptor. + */ + int fd() const throw() + { + return EVENT_FD(this); + } + + /// @note This is an abstract class, you can't instantiate it. + protected: + basic_event() throw() {} + basic_event(const basic_event&); + basic_event& operator= (const basic_event&); + +}; // struct basic_event + + +/** + * Generic event object. + * + * This object stores all the information about an event, incluiding a callback + * functor, which is called then the event is fired. Then template parameter + * must be a callable object (functor) that can take 2 parameters: an integer + * (the file descriptor of the fired event) and a short (the type of event + * fired: EV_TIMEOUT, EV_SIGNAL, EV_READ, EV_WRITE). There is an specialized + * version of this class which takes as the template parameter a C function + * with the ccallback_type signature, just like C libevent API does. + * + * @see event::event< ccallback_type > + */ +template < typename F > +struct event: basic_event +{ + + /** + * Creates a new event. + * + * @param fd File descriptor to monitor for events. + * @param ev Type of events to monitor. + * @param handler Callback functor. + * @param priority Priority of the event. + */ + event(int fd, short ev, F& handler, int priority = DEFAULT_PRIORITY) + throw(invalid_priority) + { + event_set(this, fd, ev, &wrapper, &handler); + if (priority != DEFAULT_PRIORITY + && event_priority_set(this, priority)) + throw invalid_priority(); + } + + protected: + event() {} + static void wrapper(int fd, short ev, void* h) + { + F& handler = *static_cast< F* >(h); + handler(fd, ev); + } + +}; // struct event< F > + + +/** + * This is the specialization of event::event for C-style callbacks. + * + * @see event::event + */ +template <> +struct event< ccallback_type >: basic_event +{ + + /** + * Creates a new event. + * + * @param fd File descriptor to monitor for events. + * @param ev Type of events to monitor. + * @param handler C-style callback function. + * @param arg Arbitrary pointer to pass to the handler as argument. + * @param priority Priority of the event. + */ + event(int fd, short ev, ccallback_type handler, void* arg, + int priority = DEFAULT_PRIORITY) + throw(invalid_priority) + { + event_set(this, fd, ev, handler, arg); + if (priority != DEFAULT_PRIORITY + && event_priority_set(this, priority)) + throw invalid_priority(); + } + + protected: + event() {} + +}; // struct event< ccallback_type > + + +/** + * Timer event object. + * + * This is just a special case of event that is fired only when a timeout is + * reached. It's just a shortcut to event(-1, 0, handler, priority). + * + * @note This event can't EV_PERSIST. + * @see timer< ccallback_type > + */ +template < typename F > +struct timer: event< F > +{ + + /** + * Creates a new timer event. + * + * @param handler Callback functor. + * @param priority Priority of the event. + */ + timer(F& handler, int priority = DEFAULT_PRIORITY) + throw(invalid_priority) + { + evtimer_set(this, &event< F >::wrapper, &handler); + if (priority != DEFAULT_PRIORITY + && event_priority_set(this, priority)) + throw invalid_priority(); + } + +}; // struct timer< F > + + +/** + * This is the specialization of event::timer for C-style callbacks. + * + * @note This event can't EV_PERSIST. + * @see timer + */ +template <> +struct timer< ccallback_type >: event::event< ccallback_type > +{ + + /** + * Creates a new timer event. + * + * @param handler C-style callback function. + * @param arg Arbitrary pointer to pass to the handler as argument. + * @param priority Priority of the event. + */ + timer(ccallback_type handler, void* arg, int priority = DEFAULT_PRIORITY) + throw(invalid_priority) + { + evtimer_set(this, handler, arg); + if (priority != DEFAULT_PRIORITY + && event_priority_set(this, priority)) + throw invalid_priority(); + } + +}; // struct timer< ccallback_type > + + +/** + * Signal event object. + * + * This is just a special case of event that is fired when a signal is raised + * (instead of a file descriptor being active). It's just a shortcut to + * event(signal, EV_SIGNAL, handler, priority). + * + * @note This event allways EV_PERSIST. + * @see signal< ccallback_type > + */ +template < typename F > +struct signal: event< F > +{ + + /** + * Creates a new singal event. + * + * @param signum Signal number to monitor. + * @param handler Callback functor. + * @param priority Priority of the event. + */ + signal(int signum, F& handler, int priority = DEFAULT_PRIORITY) + throw(invalid_priority) + { + signal_set(this, signum, &event< F >::wrapper, &handler); + if (priority != DEFAULT_PRIORITY + && event_priority_set(this, priority)) + throw invalid_priority(); + } + + /** + * Event's signal number. + * + * @return Event's signal number. + */ + int signum() const + { + return EVENT_SIGNAL(this); + } + +}; // struct signal + + +/** + * This is the specialization of event::signal for C-style callbacks. + * + * @note This event allways EV_PERSIST. + * @see signal + */ +template <> +struct signal< ccallback_type >: event< ccallback_type > +{ + + /** + * Creates a new signal event. + * + * @param signum Signal number to monitor. + * @param handler C-style callback function. + * @param arg Arbitrary pointer to pass to the handler as argument. + * @param priority Priority of the event. + */ + signal(int signum, ccallback_type handler, void* arg, + int priority = DEFAULT_PRIORITY) + throw(invalid_priority) + { + signal_set(this, signum, handler, arg); + if (priority != DEFAULT_PRIORITY + && event_priority_set(this, priority)) + throw invalid_priority(); + } + + /** + * Event's signal number. + * + * @return Event's signal number. + */ + int signum() const + { + return EVENT_SIGNAL(this); + } + +}; // struct signal< ccallback_type > + + +//@} + + +/** + * Event dispatcher. + * + * This class is the responsable for looping and dispatching events. + */ +struct dispatcher +{ + + /** + * Creates a default dispatcher (with just 1 prioriority). + * + * @see dispatcher(int) if you want to create a dispatcher with more + * prioriorities. + */ + dispatcher() throw() + { + _event_base = static_cast< internal::event_base* >(internal::event_init()); + } + + /** + * Creates a dispatcher with npriorities prioriorities. + * + * @param npriorities Number of priority queues to use. + */ + dispatcher(int npriorities) throw(std::bad_alloc) + { + _event_base = static_cast< internal::event_base* >(internal::event_init()); + if (!_event_base) throw std::bad_alloc(); + // Can't fail because there is no way that it has active events + internal::event_base_priority_init(_event_base, npriorities); + } + + ~dispatcher() throw() { event_base_free(_event_base); } + + /** + * Adds an event to the dispatcher. + * + * @param e Event to add. + */ + void add(basic_event& e) throw() + { + internal::event_base_set(_event_base, &e); + internal::event_add(&e, 0); + } + + /** + * Adds an event to the dispatcher with a timeout. + * + * The event is fired when there is activity on e or when to is elapsed, + * whatever come first. + * + * @param e Event to add. + * @param to Timeout. + */ + void add(basic_event& e, const time& to) throw() + { + internal::event_base_set(_event_base, &e); + internal::event_add(&e, const_cast< time* >(&to)); // XXX HACK libevent don't use const + } + + /** + * Adds a temporary event. + * + * Adds a temporary event, without the need of instantiating a new event + * object. Events added this way can't EV_PERSIST. + * + * @param fd File descriptor to monitor for events. + * @param ev Type of events to monitor. + * @param handler Callback function. + */ + template < typename F > + void add_once(int fd, short ev, F& handler) + { + internal::event_once(fd, ev, &dispatcher::wrapper< F >, &handler, 0); + } + + /** + * Adds a temporary event to with a C-style callback. + * + * Adds a temporary event, without the need of instantiating a new event + * object. Events added this way can't EV_PERSIST. + * + * @param fd File descriptor to monitor for events. + * @param ev Type of events to monitor. + * @param handler Callback function. + * @param arg Arbitrary pointer to pass to the handler as argument. + */ + void add_once(int fd, short ev, ccallback_type handler, void* arg) + { + internal::event_once(fd, ev, handler, arg, 0); + } + + /** + * Adds a temporary event. + * + * Adds a temporary event, without the need of instantiating a new event + * object. Events added this way can't EV_PERSIST. + * + * @param fd File descriptor to monitor for events. + * @param ev Type of events to monitor. + * @param handler Callback function. + * @param to Timeout. + */ + template < typename F > + void add_once(int fd, short ev, F& handler, const time& to) + { + internal::event_once(fd, ev, &dispatcher::wrapper< F >, &handler, const_cast< time* >(&to)); // XXX HACK libevent don't use const + } + + /** + * Adds a temporary event with a C-style callback. + * + * Adds a temporary event, without the need of instantiating a new event + * object. Events added this way can't EV_PERSIST. + * + * @param fd File descriptor to monitor for events. + * @param ev Type of events to monitor. + * @param handler Callback function. + * @param arg Arbitrary pointer to pass to the handler as argument. + * @param to Timeout. + */ + void add_once(int fd, short ev, ccallback_type handler, void* arg, const time& to) + { + internal::event_once(fd, ev, handler, arg, const_cast< time* >(&to)); // XXX HACK libevent don't use const + } + + /** + * Adds a temporary timer. + * + * Adds a temporary timer, without the need of instantiating a new timer + * object. + * + * @param handler Callback function. + * @param to Timer's timeout. + */ + template < typename F > + void add_once_timer(F& handler, const time& to) + { + internal::event_once(-1, EV_TIMEOUT, &dispatcher::wrapper< F >, &handler, const_cast< time* >(&to)); // XXX HACK libevent don't use const + } + + /** + * Adds a temporary timer with a C-style callback. + * + * Adds a temporary timer, without the need of instantiating a new timer + * object. + * + * @param handler Callback function. + * @param arg Arbitrary pointer to pass to the handler as argument. + * @param to Timer's timeout. + */ + void add_once_timer(ccallback_type handler, void* arg, const time& to) + { + internal::event_once(-1, EV_TIMEOUT, handler, arg, const_cast< time* >(&to)); // XXX HACK libevent don't use const + } + + /** + * Removes an event. + * + * The event e will be no longer monitored by this dispatcher. + * + * @param e Event to remove. + */ + void del(basic_event& e) throw() + { + internal::event_del(&e); + } + + /** + * Main dispatcher loop. + * + * This function takes the control of the program, waiting for event and + * calling it's callbacks when they are fired. It only returns under + * this conditions: + * - exit() was called. + * - All events were del()eted. + * - Another internal error. + * - LOOP_ONCE flag was set. + * - LOOP_NONBLOCK flag was set. + * + * @param flags If EVLOOP_ONCE is specified, then just one event is + * processed, if EVLOOP_NONBLOCK is specified, then this + * function returns whenever as an event or not. + */ + int dispatch(int flags = 0) // TODO throw(exception) + { + return internal::event_base_loop(_event_base, flags); + } + + /** + * Exit the dispatch() loop. + * + * @param to If a timeout is given, the loop exits after to is passed. + */ + int exit(const time& to = time()) + { + return internal::event_base_loopexit(_event_base, const_cast< time* >(&to)); // XXX HACK libevent don't use const + } + + protected: + internal::event_base* _event_base; + template < typename F > + static void wrapper(int fd, short ev, void* h) + { + F& handler = *static_cast< F* >(h); + handler(fd, ev); + } + +}; // struct dispatcher + + +/// Shortcut to C-style event. +typedef event::event< ccallback_type > cevent; + +/// Shortcut to C-style timer. +typedef event::timer< ccallback_type > ctimer; + +/// Shortcut to C-style signal handler. +typedef event::signal< ccallback_type > csignal; + + +} // namespace event + +#endif // _EVENT_HPP_ + +// vim: set filetype=cpp : -- 2.43.0