*** empty log message ***

[software/libev.git] / ev.3

diff --git a/ev.3 b/ev.3
index 1f33e819abcd70e0ec45634a66888759cf955a37..2129dc3002c1baa745b2640b103da86f35244408 100644 (file)
--- a/ev.3
+++ b/ev.3
@@ -128,8 +128,8 @@
 .rm #[ #] #H #V #F C
 .\" ========================================================================
 .\"
 .rm #[ #] #H #V #F C
 .\" ========================================================================
 .\"

-.IX Title ""<STANDARD INPUT>" 1"
-.TH "<STANDARD INPUT>" 1 "2007-12-07" "perl v5.8.8" "User Contributed Perl Documentation"
+.IX Title "EV 1"
+.TH EV 1 "2007-12-22" "perl v5.8.8" "User Contributed Perl Documentation"

 .SH "NAME"
 libev \- a high performance full\-featured event loop written in C
 .SH "SYNOPSIS"
 .SH "NAME"
 libev \- a high performance full\-featured event loop written in C
 .SH "SYNOPSIS"


@@ -203,7 +203,7 @@ web page you might find easier to navigate when reading it for the first
 time: <http://cvs.schmorp.de/libev/ev.html>.
 .PP
 Libev is an event loop: you register interest in certain events (such as a
 time: <http://cvs.schmorp.de/libev/ev.html>.
 .PP
 Libev is an event loop: you register interest in certain events (such as a

-file descriptor being readable or a timeout occuring), and it will manage
+file descriptor being readable or a timeout occurring), and it will manage

 these event sources and provide your program with events.
 .PP
 To do this, it must take more or less complete control over your process
 these event sources and provide your program with events.
 .PP
 To do this, it must take more or less complete control over your process


@@ -245,7 +245,9 @@ Libev represents time as a single floating point number, representing the
 the beginning of 1970, details are complicated, don't ask). This type is
 called \f(CW\*(C`ev_tstamp\*(C'\fR, which is what you should use too. It usually aliases
 to the \f(CW\*(C`double\*(C'\fR type in C, and when you need to do any calculations on
 the beginning of 1970, details are complicated, don't ask). This type is
 called \f(CW\*(C`ev_tstamp\*(C'\fR, which is what you should use too. It usually aliases
 to the \f(CW\*(C`double\*(C'\fR type in C, and when you need to do any calculations on

-it, you should treat it as such.
+it, you should treat it as some floatingpoint value. Unlike the name
+component \f(CW\*(C`stamp\*(C'\fR might indicate, it is also used for time differences
+throughout libev.

 .SH "GLOBAL FUNCTIONS"
 .IX Header "GLOBAL FUNCTIONS"
 These functions can be called anytime, even before initialising the
 .SH "GLOBAL FUNCTIONS"
 .IX Header "GLOBAL FUNCTIONS"
 These functions can be called anytime, even before initialising the


@@ -255,20 +257,28 @@ library in any way.
 Returns the current time as libev would use it. Please note that the
 \&\f(CW\*(C`ev_now\*(C'\fR function is usually faster and also often returns the timestamp
 you actually want to know.
 Returns the current time as libev would use it. Please note that the
 \&\f(CW\*(C`ev_now\*(C'\fR function is usually faster and also often returns the timestamp
 you actually want to know.

+.IP "ev_sleep (ev_tstamp interval)" 4
+.IX Item "ev_sleep (ev_tstamp interval)"
+Sleep for the given interval: The current thread will be blocked until
+either it is interrupted or the given time interval has passed. Basically
+this is a subsecond-resolution \f(CW\*(C`sleep ()\*(C'\fR.

 .IP "int ev_version_major ()" 4
 .IX Item "int ev_version_major ()"
 .PD 0
 .IP "int ev_version_minor ()" 4
 .IX Item "int ev_version_minor ()"
 .PD
 .IP "int ev_version_major ()" 4
 .IX Item "int ev_version_major ()"
 .PD 0
 .IP "int ev_version_minor ()" 4
 .IX Item "int ev_version_minor ()"
 .PD

-You can find out the major and minor version numbers of the library
+You can find out the major and minor \s-1ABI\s0 version numbers of the library

 you linked against by calling the functions \f(CW\*(C`ev_version_major\*(C'\fR and
 \&\f(CW\*(C`ev_version_minor\*(C'\fR. If you want, you can compare against the global
 symbols \f(CW\*(C`EV_VERSION_MAJOR\*(C'\fR and \f(CW\*(C`EV_VERSION_MINOR\*(C'\fR, which specify the
 version of the library your program was compiled against.
 .Sp
 you linked against by calling the functions \f(CW\*(C`ev_version_major\*(C'\fR and
 \&\f(CW\*(C`ev_version_minor\*(C'\fR. If you want, you can compare against the global
 symbols \f(CW\*(C`EV_VERSION_MAJOR\*(C'\fR and \f(CW\*(C`EV_VERSION_MINOR\*(C'\fR, which specify the
 version of the library your program was compiled against.
 .Sp

+These version numbers refer to the \s-1ABI\s0 version of the library, not the
+release version.
+.Sp

 Usually, it's a good idea to terminate if the major versions mismatch,
 Usually, it's a good idea to terminate if the major versions mismatch,

-as this indicates an incompatible change.  Minor versions are usually
+as this indicates an incompatible change. Minor versions are usually

 compatible to older versions, so a larger minor version alone is usually
 not a problem.
 .Sp
 compatible to older versions, so a larger minor version alone is usually
 not a problem.
 .Sp


@@ -443,66 +453,110 @@ environment variable.
 This is your standard \fIselect\fR\|(2) backend. Not \fIcompletely\fR standard, as
 libev tries to roll its own fd_set with no limits on the number of fds,
 but if that fails, expect a fairly low limit on the number of fds when
 This is your standard \fIselect\fR\|(2) backend. Not \fIcompletely\fR standard, as
 libev tries to roll its own fd_set with no limits on the number of fds,
 but if that fails, expect a fairly low limit on the number of fds when

-using this backend. It doesn't scale too well (O(highest_fd)), but its usually
-the fastest backend for a low number of fds.
+using this backend. It doesn't scale too well (O(highest_fd)), but its
+usually the fastest backend for a low number of (low\-numbered :) fds.
+.Sp
+To get good performance out of this backend you need a high amount of
+parallelity (most of the file descriptors should be busy). If you are
+writing a server, you should \f(CW\*(C`accept ()\*(C'\fR in a loop to accept as many
+connections as possible during one iteration. You might also want to have
+a look at \f(CW\*(C`ev_set_io_collect_interval ()\*(C'\fR to increase the amount of
+readyness notifications you get per iteration.

 .ie n .IP """EVBACKEND_POLL""    (value 2, poll backend, available everywhere except on windows)" 4
 .el .IP "\f(CWEVBACKEND_POLL\fR    (value 2, poll backend, available everywhere except on windows)" 4
 .IX Item "EVBACKEND_POLL    (value 2, poll backend, available everywhere except on windows)"
 .ie n .IP """EVBACKEND_POLL""    (value 2, poll backend, available everywhere except on windows)" 4
 .el .IP "\f(CWEVBACKEND_POLL\fR    (value 2, poll backend, available everywhere except on windows)" 4
 .IX Item "EVBACKEND_POLL    (value 2, poll backend, available everywhere except on windows)"

-And this is your standard \fIpoll\fR\|(2) backend. It's more complicated than
-select, but handles sparse fds better and has no artificial limit on the
-number of fds you can use (except it will slow down considerably with a
-lot of inactive fds). It scales similarly to select, i.e. O(total_fds).
+And this is your standard \fIpoll\fR\|(2) backend. It's more complicated
+than select, but handles sparse fds better and has no artificial
+limit on the number of fds you can use (except it will slow down
+considerably with a lot of inactive fds). It scales similarly to select,
+i.e. O(total_fds). See the entry for \f(CW\*(C`EVBACKEND_SELECT\*(C'\fR, above, for
+performance tips.

 .ie n .IP """EVBACKEND_EPOLL""   (value 4, Linux)" 4
 .el .IP "\f(CWEVBACKEND_EPOLL\fR   (value 4, Linux)" 4
 .IX Item "EVBACKEND_EPOLL   (value 4, Linux)"
 For few fds, this backend is a bit little slower than poll and select,
 .ie n .IP """EVBACKEND_EPOLL""   (value 4, Linux)" 4
 .el .IP "\f(CWEVBACKEND_EPOLL\fR   (value 4, Linux)" 4
 .IX Item "EVBACKEND_EPOLL   (value 4, Linux)"
 For few fds, this backend is a bit little slower than poll and select,

-but it scales phenomenally better. While poll and select usually scale like
-O(total_fds) where n is the total number of fds (or the highest fd), epoll scales
-either O(1) or O(active_fds).
-.Sp
-While stopping and starting an I/O watcher in the same iteration will
-result in some caching, there is still a syscall per such incident
+but it scales phenomenally better. While poll and select usually scale
+like O(total_fds) where n is the total number of fds (or the highest fd),
+epoll scales either O(1) or O(active_fds). The epoll design has a number
+of shortcomings, such as silently dropping events in some hard-to-detect
+cases and rewiring a syscall per fd change, no fork support and bad
+support for dup.
+.Sp
+While stopping, setting and starting an I/O watcher in the same iteration
+will result in some caching, there is still a syscall per such incident

 (because the fd could point to a different file description now), so its
 (because the fd could point to a different file description now), so its

-best to avoid that. Also, \fIdup()\fRed file descriptors might not work very
-well if you register events for both fds.
+best to avoid that. Also, \f(CW\*(C`dup ()\*(C'\fR'ed file descriptors might not work
+very well if you register events for both fds.

 .Sp
 Please note that epoll sometimes generates spurious notifications, so you
 need to use non-blocking I/O or other means to avoid blocking when no data
 (or space) is available.
 .Sp
 Please note that epoll sometimes generates spurious notifications, so you
 need to use non-blocking I/O or other means to avoid blocking when no data
 (or space) is available.

+.Sp
+Best performance from this backend is achieved by not unregistering all
+watchers for a file descriptor until it has been closed, if possible, i.e.
+keep at least one watcher active per fd at all times.
+.Sp
+While nominally embeddeble in other event loops, this feature is broken in
+all kernel versions tested so far.

 .ie n .IP """EVBACKEND_KQUEUE""  (value 8, most \s-1BSD\s0 clones)" 4
 .el .IP "\f(CWEVBACKEND_KQUEUE\fR  (value 8, most \s-1BSD\s0 clones)" 4
 .IX Item "EVBACKEND_KQUEUE  (value 8, most BSD clones)"
 Kqueue deserves special mention, as at the time of this writing, it
 .ie n .IP """EVBACKEND_KQUEUE""  (value 8, most \s-1BSD\s0 clones)" 4
 .el .IP "\f(CWEVBACKEND_KQUEUE\fR  (value 8, most \s-1BSD\s0 clones)" 4
 .IX Item "EVBACKEND_KQUEUE  (value 8, most BSD clones)"
 Kqueue deserves special mention, as at the time of this writing, it

-was broken on all BSDs except NetBSD (usually it doesn't work with
-anything but sockets and pipes, except on Darwin, where of course its
-completely useless). For this reason its not being \*(L"autodetected\*(R"
+was broken on all BSDs except NetBSD (usually it doesn't work reliably
+with anything but sockets and pipes, except on Darwin, where of course
+it's completely useless). For this reason it's not being \*(L"autodetected\*(R"

 unless you explicitly specify it explicitly in the flags (i.e. using
 unless you explicitly specify it explicitly in the flags (i.e. using

-\&\f(CW\*(C`EVBACKEND_KQUEUE\*(C'\fR).
+\&\f(CW\*(C`EVBACKEND_KQUEUE\*(C'\fR) or libev was compiled on a known-to-be-good (\-enough)
+system like NetBSD.
+.Sp
+You still can embed kqueue into a normal poll or select backend and use it
+only for sockets (after having made sure that sockets work with kqueue on
+the target platform). See \f(CW\*(C`ev_embed\*(C'\fR watchers for more info.

 .Sp
 It scales in the same way as the epoll backend, but the interface to the
 kernel is more efficient (which says nothing about its actual speed, of
 .Sp
 It scales in the same way as the epoll backend, but the interface to the
 kernel is more efficient (which says nothing about its actual speed, of

-course). While starting and stopping an I/O watcher does not cause an
-extra syscall as with epoll, it still adds up to four event changes per
-incident, so its best to avoid that.
+course). While stopping, setting and starting an I/O watcher does never
+cause an extra syscall as with \f(CW\*(C`EVBACKEND_EPOLL\*(C'\fR, it still adds up to
+two event changes per incident, support for \f(CW\*(C`fork ()\*(C'\fR is very bad and it
+drops fds silently in similarly hard-to-detect cases.
+.Sp
+This backend usually performs well under most conditions.
+.Sp
+While nominally embeddable in other event loops, this doesn't work
+everywhere, so you might need to test for this. And since it is broken
+almost everywhere, you should only use it when you have a lot of sockets
+(for which it usually works), by embedding it into another event loop
+(e.g. \f(CW\*(C`EVBACKEND_SELECT\*(C'\fR or \f(CW\*(C`EVBACKEND_POLL\*(C'\fR) and using it only for
+sockets.

 .ie n .IP """EVBACKEND_DEVPOLL"" (value 16, Solaris 8)" 4
 .el .IP "\f(CWEVBACKEND_DEVPOLL\fR (value 16, Solaris 8)" 4
 .IX Item "EVBACKEND_DEVPOLL (value 16, Solaris 8)"
 .ie n .IP """EVBACKEND_DEVPOLL"" (value 16, Solaris 8)" 4
 .el .IP "\f(CWEVBACKEND_DEVPOLL\fR (value 16, Solaris 8)" 4
 .IX Item "EVBACKEND_DEVPOLL (value 16, Solaris 8)"

-This is not implemented yet (and might never be).
+This is not implemented yet (and might never be, unless you send me an
+implementation). According to reports, \f(CW\*(C`/dev/poll\*(C'\fR only supports sockets
+and is not embeddable, which would limit the usefulness of this backend
+immensely.

 .ie n .IP """EVBACKEND_PORT""    (value 32, Solaris 10)" 4
 .el .IP "\f(CWEVBACKEND_PORT\fR    (value 32, Solaris 10)" 4
 .IX Item "EVBACKEND_PORT    (value 32, Solaris 10)"
 .ie n .IP """EVBACKEND_PORT""    (value 32, Solaris 10)" 4
 .el .IP "\f(CWEVBACKEND_PORT\fR    (value 32, Solaris 10)" 4
 .IX Item "EVBACKEND_PORT    (value 32, Solaris 10)"

-This uses the Solaris 10 port mechanism. As with everything on Solaris,
+This uses the Solaris 10 event port mechanism. As with everything on Solaris,

 it's really slow, but it still scales very well (O(active_fds)).
 .Sp
 it's really slow, but it still scales very well (O(active_fds)).
 .Sp

-Please note that solaris ports can result in a lot of spurious
+Please note that solaris event ports can deliver a lot of spurious

 notifications, so you need to use non-blocking I/O or other means to avoid
 blocking when no data (or space) is available.
 notifications, so you need to use non-blocking I/O or other means to avoid
 blocking when no data (or space) is available.

+.Sp
+While this backend scales well, it requires one system call per active
+file descriptor per loop iteration. For small and medium numbers of file
+descriptors a \*(L"slow\*(R" \f(CW\*(C`EVBACKEND_SELECT\*(C'\fR or \f(CW\*(C`EVBACKEND_POLL\*(C'\fR backend
+might perform better.

 .ie n .IP """EVBACKEND_ALL""" 4
 .el .IP "\f(CWEVBACKEND_ALL\fR" 4
 .IX Item "EVBACKEND_ALL"
 Try all backends (even potentially broken ones that wouldn't be tried
 with \f(CW\*(C`EVFLAG_AUTO\*(C'\fR). Since this is a mask, you can do stuff such as
 \&\f(CW\*(C`EVBACKEND_ALL & ~EVBACKEND_KQUEUE\*(C'\fR.
 .ie n .IP """EVBACKEND_ALL""" 4
 .el .IP "\f(CWEVBACKEND_ALL\fR" 4
 .IX Item "EVBACKEND_ALL"
 Try all backends (even potentially broken ones that wouldn't be tried
 with \f(CW\*(C`EVFLAG_AUTO\*(C'\fR). Since this is a mask, you can do stuff such as
 \&\f(CW\*(C`EVBACKEND_ALL & ~EVBACKEND_KQUEUE\*(C'\fR.

+.Sp
+It is definitely not recommended to use this flag.

 .RE
 .RS 4
 .Sp
 .RE
 .RS 4
 .Sp


@@ -554,8 +608,17 @@ etc.). None of the active event watchers will be stopped in the normal
 sense, so e.g. \f(CW\*(C`ev_is_active\*(C'\fR might still return true. It is your
 responsibility to either stop all watchers cleanly yoursef \fIbefore\fR
 calling this function, or cope with the fact afterwards (which is usually
 sense, so e.g. \f(CW\*(C`ev_is_active\*(C'\fR might still return true. It is your
 responsibility to either stop all watchers cleanly yoursef \fIbefore\fR
 calling this function, or cope with the fact afterwards (which is usually

-the easiest thing, youc na just ignore the watchers and/or \f(CW\*(C`free ()\*(C'\fR them
+the easiest thing, you can just ignore the watchers and/or \f(CW\*(C`free ()\*(C'\fR them

 for example).
 for example).

+.Sp
+Note that certain global state, such as signal state, will not be freed by
+this function, and related watchers (such as signal and child watchers)
+would need to be stopped manually.
+.Sp
+In general it is not advisable to call this function except in the
+rare occasion where you really need to free e.g. the signal handling
+pipe fds. If you need dynamically allocated loops it is better to use
+\&\f(CW\*(C`ev_loop_new\*(C'\fR and \f(CW\*(C`ev_loop_destroy\*(C'\fR).

 .IP "ev_loop_destroy (loop)" 4
 .IX Item "ev_loop_destroy (loop)"
 Like \f(CW\*(C`ev_default_destroy\*(C'\fR, but destroys an event loop created by an
 .IP "ev_loop_destroy (loop)" 4
 .IX Item "ev_loop_destroy (loop)"
 Like \f(CW\*(C`ev_default_destroy\*(C'\fR, but destroys an event loop created by an


@@ -606,7 +669,7 @@ Returns the current \*(L"event loop time\*(R", which is the time the event loop
 received events and started processing them. This timestamp does not
 change as long as callbacks are being processed, and this is also the base
 time used for relative timers. You can treat it as the timestamp of the
 received events and started processing them. This timestamp does not
 change as long as callbacks are being processed, and this is also the base
 time used for relative timers. You can treat it as the timestamp of the

-event occuring (or more correctly, libev finding out about it).
+event occurring (or more correctly, libev finding out about it).

 .IP "ev_loop (loop, int flags)" 4
 .IX Item "ev_loop (loop, int flags)"
 Finally, this is it, the event handler. This function usually is called
 .IP "ev_loop (loop, int flags)" 4
 .IX Item "ev_loop (loop, int flags)"
 Finally, this is it, the event handler. This function usually is called


@@ -636,9 +699,10 @@ usually a better approach for this kind of thing.
 .Sp
 Here are the gory details of what \f(CW\*(C`ev_loop\*(C'\fR does:
 .Sp
 .Sp
 Here are the gory details of what \f(CW\*(C`ev_loop\*(C'\fR does:
 .Sp

-.Vb 18
+.Vb 19
+\&   - Before the first iteration, call any pending watchers.

 \&   * If there are no active watchers (reference count is zero), return.
 \&   * If there are no active watchers (reference count is zero), return.

-\&   - Queue prepare watchers and then call all outstanding watchers.
+\&   - Queue all prepare watchers and then call all outstanding watchers.

 \&   - If we have been forked, recreate the kernel state.
 \&   - Update the kernel state with all outstanding changes.
 \&   - Update the "event loop time".
 \&   - If we have been forked, recreate the kernel state.
 \&   - Update the kernel state with all outstanding changes.
 \&   - Update the "event loop time".


@@ -705,6 +769,43 @@ Example: For some weird reason, unregister the above signal handler again.
 \&  ev_ref (loop);
 \&  ev_signal_stop (loop, &exitsig);
 .Ve
 \&  ev_ref (loop);
 \&  ev_signal_stop (loop, &exitsig);
 .Ve

+.IP "ev_set_io_collect_interval (loop, ev_tstamp interval)" 4
+.IX Item "ev_set_io_collect_interval (loop, ev_tstamp interval)"
+.PD 0
+.IP "ev_set_timeout_collect_interval (loop, ev_tstamp interval)" 4
+.IX Item "ev_set_timeout_collect_interval (loop, ev_tstamp interval)"
+.PD
+These advanced functions influence the time that libev will spend waiting
+for events. Both are by default \f(CW0\fR, meaning that libev will try to
+invoke timer/periodic callbacks and I/O callbacks with minimum latency.
+.Sp
+Setting these to a higher value (the \f(CW\*(C`interval\*(C'\fR \fImust\fR be >= \f(CW0\fR)
+allows libev to delay invocation of I/O and timer/periodic callbacks to
+increase efficiency of loop iterations.
+.Sp
+The background is that sometimes your program runs just fast enough to
+handle one (or very few) event(s) per loop iteration. While this makes
+the program responsive, it also wastes a lot of \s-1CPU\s0 time to poll for new
+events, especially with backends like \f(CW\*(C`select ()\*(C'\fR which have a high
+overhead for the actual polling but can deliver many events at once.
+.Sp
+By setting a higher \fIio collect interval\fR you allow libev to spend more
+time collecting I/O events, so you can handle more events per iteration,
+at the cost of increasing latency. Timeouts (both \f(CW\*(C`ev_periodic\*(C'\fR and
+\&\f(CW\*(C`ev_timer\*(C'\fR) will be not affected. Setting this to a non-null value will
+introduce an additional \f(CW\*(C`ev_sleep ()\*(C'\fR call into most loop iterations.
+.Sp
+Likewise, by setting a higher \fItimeout collect interval\fR you allow libev
+to spend more time collecting timeouts, at the expense of increased
+latency (the watcher callback will be called later). \f(CW\*(C`ev_io\*(C'\fR watchers
+will not be affected. Setting this to a non-null value will not introduce
+any overhead in libev.
+.Sp
+Many (busy) programs can usually benefit by setting the io collect
+interval to a value near \f(CW0.1\fR or so, which is often enough for
+interactive servers (of course not for games), likewise for timeouts. It
+usually doesn't make much sense to set it to a lower value than \f(CW0.01\fR,
+as this approsaches the timing granularity of most systems.

 .SH "ANATOMY OF A WATCHER"
 .IX Header "ANATOMY OF A WATCHER"
 A watcher is a structure that you create and register to record your
 .SH "ANATOMY OF A WATCHER"
 .IX Header "ANATOMY OF A WATCHER"
 A watcher is a structure that you create and register to record your


@@ -891,8 +992,9 @@ it.
 Returns a true value iff the watcher is pending, (i.e. it has outstanding
 events but its callback has not yet been invoked). As long as a watcher
 is pending (but not active) you must not call an init function on it (but
 Returns a true value iff the watcher is pending, (i.e. it has outstanding
 events but its callback has not yet been invoked). As long as a watcher
 is pending (but not active) you must not call an init function on it (but

-\&\f(CW\*(C`ev_TYPE_set\*(C'\fR is safe) and you must make sure the watcher is available to
-libev (e.g. you cnanot \f(CW\*(C`free ()\*(C'\fR it).
+\&\f(CW\*(C`ev_TYPE_set\*(C'\fR is safe), you must not change its priority, and you must
+make sure the watcher is available to libev (e.g. you cannot \f(CW\*(C`free ()\*(C'\fR
+it).

 .IP "callback ev_cb (ev_TYPE *watcher)" 4
 .IX Item "callback ev_cb (ev_TYPE *watcher)"
 Returns the callback currently set on the watcher.
 .IP "callback ev_cb (ev_TYPE *watcher)" 4
 .IX Item "callback ev_cb (ev_TYPE *watcher)"
 Returns the callback currently set on the watcher.


@@ -920,12 +1022,25 @@ watchers on the same event and make sure one is called first.
 If you need to suppress invocation when higher priority events are pending
 you need to look at \f(CW\*(C`ev_idle\*(C'\fR watchers, which provide this functionality.
 .Sp
 If you need to suppress invocation when higher priority events are pending
 you need to look at \f(CW\*(C`ev_idle\*(C'\fR watchers, which provide this functionality.
 .Sp

+You \fImust not\fR change the priority of a watcher as long as it is active or
+pending.
+.Sp

 The default priority used by watchers when no priority has been set is
 always \f(CW0\fR, which is supposed to not be too high and not be too low :).
 .Sp
 Setting a priority outside the range of \f(CW\*(C`EV_MINPRI\*(C'\fR to \f(CW\*(C`EV_MAXPRI\*(C'\fR is
 fine, as long as you do not mind that the priority value you query might
 or might not have been adjusted to be within valid range.
 The default priority used by watchers when no priority has been set is
 always \f(CW0\fR, which is supposed to not be too high and not be too low :).
 .Sp
 Setting a priority outside the range of \f(CW\*(C`EV_MINPRI\*(C'\fR to \f(CW\*(C`EV_MAXPRI\*(C'\fR is
 fine, as long as you do not mind that the priority value you query might
 or might not have been adjusted to be within valid range.

+.IP "ev_invoke (loop, ev_TYPE *watcher, int revents)" 4
+.IX Item "ev_invoke (loop, ev_TYPE *watcher, int revents)"
+Invoke the \f(CW\*(C`watcher\*(C'\fR with the given \f(CW\*(C`loop\*(C'\fR and \f(CW\*(C`revents\*(C'\fR. Neither
+\&\f(CW\*(C`loop\*(C'\fR nor \f(CW\*(C`revents\*(C'\fR need to be valid as long as the watcher callback
+can deal with that fact.
+.IP "int ev_clear_pending (loop, ev_TYPE *watcher)" 4
+.IX Item "int ev_clear_pending (loop, ev_TYPE *watcher)"
+If the watcher is pending, this function returns clears its pending status
+and returns its \f(CW\*(C`revents\*(C'\fR bitset (as if its callback was invoked). If the
+watcher isn't pending it does nothing and returns \f(CW0\fR.

 .Sh "\s-1ASSOCIATING\s0 \s-1CUSTOM\s0 \s-1DATA\s0 \s-1WITH\s0 A \s-1WATCHER\s0"
 .IX Subsection "ASSOCIATING CUSTOM DATA WITH A WATCHER"
 Each watcher has, by default, a member \f(CW\*(C`void *data\*(C'\fR that you can change
 .Sh "\s-1ASSOCIATING\s0 \s-1CUSTOM\s0 \s-1DATA\s0 \s-1WITH\s0 A \s-1WATCHER\s0"
 .IX Subsection "ASSOCIATING CUSTOM DATA WITH A WATCHER"
 Each watcher has, by default, a member \f(CW\*(C`void *data\*(C'\fR that you can change


@@ -1049,6 +1164,55 @@ play around with an Xlib connection), then you have to seperately re-test
 whether a file descriptor is really ready with a known-to-be good interface
 such as poll (fortunately in our Xlib example, Xlib already does this on
 its own, so its quite safe to use).
 whether a file descriptor is really ready with a known-to-be good interface
 such as poll (fortunately in our Xlib example, Xlib already does this on
 its own, so its quite safe to use).

+.PP
+\fIThe special problem of disappearing file descriptors\fR
+.IX Subsection "The special problem of disappearing file descriptors"
+.PP
+Some backends (e.g. kqueue, epoll) need to be told about closing a file
+descriptor (either by calling \f(CW\*(C`close\*(C'\fR explicitly or by any other means,
+such as \f(CW\*(C`dup\*(C'\fR). The reason is that you register interest in some file
+descriptor, but when it goes away, the operating system will silently drop
+this interest. If another file descriptor with the same number then is
+registered with libev, there is no efficient way to see that this is, in
+fact, a different file descriptor.
+.PP
+To avoid having to explicitly tell libev about such cases, libev follows
+the following policy:  Each time \f(CW\*(C`ev_io_set\*(C'\fR is being called, libev
+will assume that this is potentially a new file descriptor, otherwise
+it is assumed that the file descriptor stays the same. That means that
+you \fIhave\fR to call \f(CW\*(C`ev_io_set\*(C'\fR (or \f(CW\*(C`ev_io_init\*(C'\fR) when you change the
+descriptor even if the file descriptor number itself did not change.
+.PP
+This is how one would do it normally anyway, the important point is that
+the libev application should not optimise around libev but should leave
+optimisations to libev.
+.PP
+\fIThe special problem of dup'ed file descriptors\fR
+.IX Subsection "The special problem of dup'ed file descriptors"
+.PP
+Some backends (e.g. epoll), cannot register events for file descriptors,
+but only events for the underlying file descriptions. That menas when you
+have \f(CW\*(C`dup ()\*(C'\fR'ed file descriptors and register events for them, only one
+file descriptor might actually receive events.
+.PP
+There is no workaorund possible except not registering events
+for potentially \f(CW\*(C`dup ()\*(C'\fR'ed file descriptors or to resort to
+\&\f(CW\*(C`EVBACKEND_SELECT\*(C'\fR or \f(CW\*(C`EVBACKEND_POLL\*(C'\fR.
+.PP
+\fIThe special problem of fork\fR
+.IX Subsection "The special problem of fork"
+.PP
+Some backends (epoll, kqueue) do not support \f(CW\*(C`fork ()\*(C'\fR at all or exhibit
+useless behaviour. Libev fully supports fork, but needs to be told about
+it in the child.
+.PP
+To support fork in your programs, you either have to call
+\&\f(CW\*(C`ev_default_fork ()\*(C'\fR or \f(CW\*(C`ev_loop_fork ()\*(C'\fR after a fork in the child,
+enable \f(CW\*(C`EVFLAG_FORKCHECK\*(C'\fR, or resort to \f(CW\*(C`EVBACKEND_SELECT\*(C'\fR or
+\&\f(CW\*(C`EVBACKEND_POLL\*(C'\fR.
+.PP
+\fIWatcher-Specific Functions\fR
+.IX Subsection "Watcher-Specific Functions"

 .IP "ev_io_init (ev_io *, callback, int fd, int events)" 4
 .IX Item "ev_io_init (ev_io *, callback, int fd, int events)"
 .PD 0
 .IP "ev_io_init (ev_io *, callback, int fd, int events)" 4
 .IX Item "ev_io_init (ev_io *, callback, int fd, int events)"
 .PD 0


@@ -1111,6 +1275,9 @@ on the current time, use something like this to adjust for this:
 The callback is guarenteed to be invoked only when its timeout has passed,
 but if multiple timers become ready during the same loop iteration then
 order of execution is undefined.
 The callback is guarenteed to be invoked only when its timeout has passed,
 but if multiple timers become ready during the same loop iteration then
 order of execution is undefined.

+.PP
+\fIWatcher-Specific Functions and Data Members\fR
+.IX Subsection "Watcher-Specific Functions and Data Members"

 .IP "ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)" 4
 .IX Item "ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)"
 .PD 0
 .IP "ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)" 4
 .IX Item "ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)"
 .PD 0


@@ -1222,15 +1389,18 @@ to trigger \*(L"at\*(R" some specific point in time. For example, if you tell a
 periodic watcher to trigger in 10 seconds (by specifiying e.g. \f(CW\*(C`ev_now ()
 + 10.\*(C'\fR) and then reset your system clock to the last year, then it will
 take a year to trigger the event (unlike an \f(CW\*(C`ev_timer\*(C'\fR, which would trigger
 periodic watcher to trigger in 10 seconds (by specifiying e.g. \f(CW\*(C`ev_now ()
 + 10.\*(C'\fR) and then reset your system clock to the last year, then it will
 take a year to trigger the event (unlike an \f(CW\*(C`ev_timer\*(C'\fR, which would trigger

-roughly 10 seconds later and of course not if you reset your system time
-again).
+roughly 10 seconds later).

 .PP
 They can also be used to implement vastly more complex timers, such as
 .PP
 They can also be used to implement vastly more complex timers, such as

-triggering an event on eahc midnight, local time.
+triggering an event on each midnight, local time or other, complicated,
+rules.

 .PP
 As with timers, the callback is guarenteed to be invoked only when the
 time (\f(CW\*(C`at\*(C'\fR) has been passed, but if multiple periodic timers become ready
 during the same loop iteration then order of execution is undefined.
 .PP
 As with timers, the callback is guarenteed to be invoked only when the
 time (\f(CW\*(C`at\*(C'\fR) has been passed, but if multiple periodic timers become ready
 during the same loop iteration then order of execution is undefined.

+.PP
+\fIWatcher-Specific Functions and Data Members\fR
+.IX Subsection "Watcher-Specific Functions and Data Members"

 .IP "ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)" 4
 .IX Item "ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)"
 .PD 0
 .IP "ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)" 4
 .IX Item "ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)"
 .PD 0


@@ -1240,17 +1410,17 @@ during the same loop iteration then order of execution is undefined.
 Lots of arguments, lets sort it out... There are basically three modes of
 operation, and we will explain them from simplest to complex:
 .RS 4
 Lots of arguments, lets sort it out... There are basically three modes of
 operation, and we will explain them from simplest to complex:
 .RS 4

-.IP "* absolute timer (interval = reschedule_cb = 0)" 4
-.IX Item "absolute timer (interval = reschedule_cb = 0)"
+.IP "* absolute timer (at = time, interval = reschedule_cb = 0)" 4
+.IX Item "absolute timer (at = time, interval = reschedule_cb = 0)"

 In this configuration the watcher triggers an event at the wallclock time
 \&\f(CW\*(C`at\*(C'\fR and doesn't repeat. It will not adjust when a time jump occurs,
 that is, if it is to be run at January 1st 2011 then it will run when the
 system time reaches or surpasses this time.
 In this configuration the watcher triggers an event at the wallclock time
 \&\f(CW\*(C`at\*(C'\fR and doesn't repeat. It will not adjust when a time jump occurs,
 that is, if it is to be run at January 1st 2011 then it will run when the
 system time reaches or surpasses this time.

-.IP "* non-repeating interval timer (interval > 0, reschedule_cb = 0)" 4
-.IX Item "non-repeating interval timer (interval > 0, reschedule_cb = 0)"
+.IP "* non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)" 4
+.IX Item "non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)"

 In this mode the watcher will always be scheduled to time out at the next
 In this mode the watcher will always be scheduled to time out at the next

-\&\f(CW\*(C`at + N * interval\*(C'\fR time (for some integer N) and then repeat, regardless
-of any time jumps.
+\&\f(CW\*(C`at + N * interval\*(C'\fR time (for some integer N, which can also be negative)
+and then repeat, regardless of any time jumps.

 .Sp
 This can be used to create timers that do not drift with respect to system
 time:
 .Sp
 This can be used to create timers that do not drift with respect to system
 time:


@@ -1267,8 +1437,12 @@ by 3600.
 Another way to think about it (for the mathematically inclined) is that
 \&\f(CW\*(C`ev_periodic\*(C'\fR will try to run the callback in this mode at the next possible
 time where \f(CW\*(C`time = at (mod interval)\*(C'\fR, regardless of any time jumps.
 Another way to think about it (for the mathematically inclined) is that
 \&\f(CW\*(C`ev_periodic\*(C'\fR will try to run the callback in this mode at the next possible
 time where \f(CW\*(C`time = at (mod interval)\*(C'\fR, regardless of any time jumps.

-.IP "* manual reschedule mode (reschedule_cb = callback)" 4
-.IX Item "manual reschedule mode (reschedule_cb = callback)"
+.Sp
+For numerical stability it is preferable that the \f(CW\*(C`at\*(C'\fR value is near
+\&\f(CW\*(C`ev_now ()\*(C'\fR (the current time), but there is no range requirement for
+this value.
+.IP "* manual reschedule mode (at and interval ignored, reschedule_cb = callback)" 4
+.IX Item "manual reschedule mode (at and interval ignored, reschedule_cb = callback)"

 In this mode the values for \f(CW\*(C`interval\*(C'\fR and \f(CW\*(C`at\*(C'\fR are both being
 ignored. Instead, each time the periodic watcher gets scheduled, the
 reschedule callback will be called with the watcher as first, and the
 In this mode the values for \f(CW\*(C`interval\*(C'\fR and \f(CW\*(C`at\*(C'\fR are both being
 ignored. Instead, each time the periodic watcher gets scheduled, the
 reschedule callback will be called with the watcher as first, and the


@@ -1277,7 +1451,7 @@ current time as second argument.
 \&\s-1NOTE:\s0 \fIThis callback \s-1MUST\s0 \s-1NOT\s0 stop or destroy any periodic watcher,
 ever, or make any event loop modifications\fR. If you need to stop it,
 return \f(CW\*(C`now + 1e30\*(C'\fR (or so, fudge fudge) and stop it afterwards (e.g. by
 \&\s-1NOTE:\s0 \fIThis callback \s-1MUST\s0 \s-1NOT\s0 stop or destroy any periodic watcher,
 ever, or make any event loop modifications\fR. If you need to stop it,
 return \f(CW\*(C`now + 1e30\*(C'\fR (or so, fudge fudge) and stop it afterwards (e.g. by

-starting a prepare watcher).
+starting an \f(CW\*(C`ev_prepare\*(C'\fR watcher, which is legal).

 .Sp
 Its prototype is \f(CW\*(C`ev_tstamp (*reschedule_cb)(struct ev_periodic *w,
 ev_tstamp now)\*(C'\fR, e.g.:
 .Sp
 Its prototype is \f(CW\*(C`ev_tstamp (*reschedule_cb)(struct ev_periodic *w,
 ev_tstamp now)\*(C'\fR, e.g.:


@@ -1311,6 +1485,13 @@ Simply stops and restarts the periodic watcher again. This is only useful
 when you changed some parameters or the reschedule callback would return
 a different time than the last time it was called (e.g. in a crond like
 program when the crontabs have changed).
 when you changed some parameters or the reschedule callback would return
 a different time than the last time it was called (e.g. in a crond like
 program when the crontabs have changed).

+.IP "ev_tstamp offset [read\-write]" 4
+.IX Item "ev_tstamp offset [read-write]"
+When repeating, this contains the offset value, otherwise this is the
+absolute point in time (the \f(CW\*(C`at\*(C'\fR value passed to \f(CW\*(C`ev_periodic_set\*(C'\fR).
+.Sp
+Can be modified any time, but changes only take effect when the periodic
+timer fires or \f(CW\*(C`ev_periodic_again\*(C'\fR is being called.

 .IP "ev_tstamp interval [read\-write]" 4
 .IX Item "ev_tstamp interval [read-write]"
 The current interval value. Can be modified any time, but changes only
 .IP "ev_tstamp interval [read\-write]" 4
 .IX Item "ev_tstamp interval [read-write]"
 The current interval value. Can be modified any time, but changes only


@@ -1321,6 +1502,10 @@ called.
 The current reschedule callback, or \f(CW0\fR, if this functionality is
 switched off. Can be changed any time, but changes only take effect when
 the periodic timer fires or \f(CW\*(C`ev_periodic_again\*(C'\fR is being called.
 The current reschedule callback, or \f(CW0\fR, if this functionality is
 switched off. Can be changed any time, but changes only take effect when
 the periodic timer fires or \f(CW\*(C`ev_periodic_again\*(C'\fR is being called.

+.IP "ev_tstamp at [read\-only]" 4
+.IX Item "ev_tstamp at [read-only]"
+When active, contains the absolute time that the watcher is supposed to
+trigger next.

 .PP
 Example: Call a callback every hour, or, more precisely, whenever the
 system clock is divisible by 3600. The callback invocation times have
 .PP
 Example: Call a callback every hour, or, more precisely, whenever the
 system clock is divisible by 3600. The callback invocation times have


@@ -1380,6 +1565,9 @@ with the kernel (thus it coexists with your own signal handlers as long
 as you don't register any with libev). Similarly, when the last signal
 watcher for a signal is stopped libev will reset the signal handler to
 \&\s-1SIG_DFL\s0 (regardless of what it was set to before).
 as you don't register any with libev). Similarly, when the last signal
 watcher for a signal is stopped libev will reset the signal handler to
 \&\s-1SIG_DFL\s0 (regardless of what it was set to before).

+.PP
+\fIWatcher-Specific Functions and Data Members\fR
+.IX Subsection "Watcher-Specific Functions and Data Members"

 .IP "ev_signal_init (ev_signal *, callback, int signum)" 4
 .IX Item "ev_signal_init (ev_signal *, callback, int signum)"
 .PD 0
 .IP "ev_signal_init (ev_signal *, callback, int signum)" 4
 .IX Item "ev_signal_init (ev_signal *, callback, int signum)"
 .PD 0


@@ -1396,6 +1584,9 @@ The signal the watcher watches out for.
 .IX Subsection "ev_child - watch out for process status changes"
 Child watchers trigger when your process receives a \s-1SIGCHLD\s0 in response to
 some child status changes (most typically when a child of yours dies).
 .IX Subsection "ev_child - watch out for process status changes"
 Child watchers trigger when your process receives a \s-1SIGCHLD\s0 in response to
 some child status changes (most typically when a child of yours dies).

+.PP
+\fIWatcher-Specific Functions and Data Members\fR
+.IX Subsection "Watcher-Specific Functions and Data Members"

 .IP "ev_child_init (ev_child *, callback, int pid)" 4
 .IX Item "ev_child_init (ev_child *, callback, int pid)"
 .PD 0
 .IP "ev_child_init (ev_child *, callback, int pid)" 4
 .IX Item "ev_child_init (ev_child *, callback, int pid)"
 .PD 0


@@ -1470,6 +1661,9 @@ semantics of \f(CW\*(C`ev_stat\*(C'\fR watchers, which means that libev sometime
 to fall back to regular polling again even with inotify, but changes are
 usually detected immediately, and if the file exists there will be no
 polling.
 to fall back to regular polling again even with inotify, but changes are
 usually detected immediately, and if the file exists there will be no
 polling.

+.PP
+\fIWatcher-Specific Functions and Data Members\fR
+.IX Subsection "Watcher-Specific Functions and Data Members"

 .IP "ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)" 4
 .IX Item "ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)"
 .PD 0
 .IP "ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)" 4
 .IX Item "ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)"
 .PD 0


@@ -1558,6 +1752,9 @@ Apart from keeping your process non-blocking (which is a useful
 effect on its own sometimes), idle watchers are a good place to do
 \&\*(L"pseudo\-background processing\*(R", or delay processing stuff to after the
 event loop has handled all outstanding events.
 effect on its own sometimes), idle watchers are a good place to do
 \&\*(L"pseudo\-background processing\*(R", or delay processing stuff to after the
 event loop has handled all outstanding events.

+.PP
+\fIWatcher-Specific Functions and Data Members\fR
+.IX Subsection "Watcher-Specific Functions and Data Members"

 .IP "ev_idle_init (ev_signal *, callback)" 4
 .IX Item "ev_idle_init (ev_signal *, callback)"
 Initialises and configures the idle watcher \- it has no parameters of any
 .IP "ev_idle_init (ev_signal *, callback)" 4
 .IX Item "ev_idle_init (ev_signal *, callback)"
 Initialises and configures the idle watcher \- it has no parameters of any


@@ -1622,6 +1819,19 @@ with priority higher than or equal to the event loop and one coroutine
 of lower priority, but only once, using idle watchers to keep the event
 loop from blocking if lower-priority coroutines are active, thus mapping
 low-priority coroutines to idle/background tasks).
 of lower priority, but only once, using idle watchers to keep the event
 loop from blocking if lower-priority coroutines are active, thus mapping
 low-priority coroutines to idle/background tasks).

+.PP
+It is recommended to give \f(CW\*(C`ev_check\*(C'\fR watchers highest (\f(CW\*(C`EV_MAXPRI\*(C'\fR)
+priority, to ensure that they are being run before any other watchers
+after the poll. Also, \f(CW\*(C`ev_check\*(C'\fR watchers (and \f(CW\*(C`ev_prepare\*(C'\fR watchers,
+too) should not activate (\*(L"feed\*(R") events into libev. While libev fully
+supports this, they will be called before other \f(CW\*(C`ev_check\*(C'\fR watchers
+did their job. As \f(CW\*(C`ev_check\*(C'\fR watchers are often used to embed other
+(non\-libev) event loops those other event loops might be in an unusable
+state until their \f(CW\*(C`ev_check\*(C'\fR watcher ran (always remind yourself to
+coexist peacefully with others).
+.PP
+\fIWatcher-Specific Functions and Data Members\fR
+.IX Subsection "Watcher-Specific Functions and Data Members"

 .IP "ev_prepare_init (ev_prepare *, callback)" 4
 .IX Item "ev_prepare_init (ev_prepare *, callback)"
 .PD 0
 .IP "ev_prepare_init (ev_prepare *, callback)" 4
 .IX Item "ev_prepare_init (ev_prepare *, callback)"
 .PD 0


@@ -1632,25 +1842,28 @@ Initialises and configures the prepare or check watcher \- they have no
 parameters of any kind. There are \f(CW\*(C`ev_prepare_set\*(C'\fR and \f(CW\*(C`ev_check_set\*(C'\fR
 macros, but using them is utterly, utterly and completely pointless.
 .PP
 parameters of any kind. There are \f(CW\*(C`ev_prepare_set\*(C'\fR and \f(CW\*(C`ev_check_set\*(C'\fR
 macros, but using them is utterly, utterly and completely pointless.
 .PP

-Example: To include a library such as adns, you would add \s-1IO\s0 watchers
-and a timeout watcher in a prepare handler, as required by libadns, and
-in a check watcher, destroy them and call into libadns. What follows is
-pseudo-code only of course:
+There are a number of principal ways to embed other event loops or modules
+into libev. Here are some ideas on how to include libadns into libev
+(there is a Perl module named \f(CW\*(C`EV::ADNS\*(C'\fR that does this, which you could
+use for an actually working example. Another Perl module named \f(CW\*(C`EV::Glib\*(C'\fR
+embeds a Glib main context into libev, and finally, \f(CW\*(C`Glib::EV\*(C'\fR embeds \s-1EV\s0
+into the Glib event loop).
+.PP
+Method 1: Add \s-1IO\s0 watchers and a timeout watcher in a prepare handler,
+and in a check watcher, destroy them and call into libadns. What follows
+is pseudo-code only of course. This requires you to either use a low
+priority for the check watcher or use \f(CW\*(C`ev_clear_pending\*(C'\fR explicitly, as
+the callbacks for the IO/timeout watchers might not have been called yet.

 .PP
 .Vb 2
 \&  static ev_io iow [nfd];
 \&  static ev_timer tw;
 .Ve
 .PP
 .PP
 .Vb 2
 \&  static ev_io iow [nfd];
 \&  static ev_timer tw;
 .Ve
 .PP

-.Vb 9
+.Vb 4

 \&  static void
 \&  io_cb (ev_loop *loop, ev_io *w, int revents)
 \&  {
 \&  static void
 \&  io_cb (ev_loop *loop, ev_io *w, int revents)
 \&  {

-\&    // set the relevant poll flags
-\&    // could also call adns_processreadable etc. here
-\&    struct pollfd *fd = (struct pollfd *)w->data;
-\&    if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
-\&    if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;

 \&  }
 .Ve
 .PP
 \&  }
 .Ve
 .PP


@@ -1672,7 +1885,7 @@ pseudo-code only of course:
 .Ve
 .PP
 .Vb 6
 .Ve
 .PP
 .Vb 6

-\&    // create on ev_io per pollfd
+\&    // create one ev_io per pollfd

 \&    for (int i = 0; i < nfd; ++i)
 \&      {
 \&        ev_io_init (iow + i, io_cb, fds [i].fd,
 \&    for (int i = 0; i < nfd; ++i)
 \&      {
 \&        ev_io_init (iow + i, io_cb, fds [i].fd,


@@ -1680,9 +1893,8 @@ pseudo-code only of course:
 \&           | (fds [i].events & POLLOUT ? EV_WRITE : 0)));
 .Ve
 .PP
 \&           | (fds [i].events & POLLOUT ? EV_WRITE : 0)));
 .Ve
 .PP

-.Vb 5
+.Vb 4

 \&        fds [i].revents = 0;
 \&        fds [i].revents = 0;

-\&        iow [i].data = fds + i;

 \&        ev_io_start (loop, iow + i);
 \&      }
 \&  }
 \&        ev_io_start (loop, iow + i);
 \&      }
 \&  }


@@ -1696,15 +1908,110 @@ pseudo-code only of course:
 \&    ev_timer_stop (loop, &tw);
 .Ve
 .PP
 \&    ev_timer_stop (loop, &tw);
 .Ve
 .PP

-.Vb 2
+.Vb 8

 \&    for (int i = 0; i < nfd; ++i)
 \&    for (int i = 0; i < nfd; ++i)

-\&      ev_io_stop (loop, iow + i);
+\&      {
+\&        // set the relevant poll flags
+\&        // could also call adns_processreadable etc. here
+\&        struct pollfd *fd = fds + i;
+\&        int revents = ev_clear_pending (iow + i);
+\&        if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
+\&        if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
+.Ve
+.PP
+.Vb 3
+\&        // now stop the watcher
+\&        ev_io_stop (loop, iow + i);
+\&      }

 .Ve
 .PP
 .Vb 2
 \&    adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
 \&  }
 .Ve
 .Ve
 .PP
 .Vb 2
 \&    adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
 \&  }
 .Ve

+.PP
+Method 2: This would be just like method 1, but you run \f(CW\*(C`adns_afterpoll\*(C'\fR
+in the prepare watcher and would dispose of the check watcher.
+.PP
+Method 3: If the module to be embedded supports explicit event
+notification (adns does), you can also make use of the actual watcher
+callbacks, and only destroy/create the watchers in the prepare watcher.
+.PP
+.Vb 5
+\&  static void
+\&  timer_cb (EV_P_ ev_timer *w, int revents)
+\&  {
+\&    adns_state ads = (adns_state)w->data;
+\&    update_now (EV_A);
+.Ve
+.PP
+.Vb 2
+\&    adns_processtimeouts (ads, &tv_now);
+\&  }
+.Ve
+.PP
+.Vb 5
+\&  static void
+\&  io_cb (EV_P_ ev_io *w, int revents)
+\&  {
+\&    adns_state ads = (adns_state)w->data;
+\&    update_now (EV_A);
+.Ve
+.PP
+.Vb 3
+\&    if (revents & EV_READ ) adns_processreadable  (ads, w->fd, &tv_now);
+\&    if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
+\&  }
+.Ve
+.PP
+.Vb 1
+\&  // do not ever call adns_afterpoll
+.Ve
+.PP
+Method 4: Do not use a prepare or check watcher because the module you
+want to embed is too inflexible to support it. Instead, youc na override
+their poll function.  The drawback with this solution is that the main
+loop is now no longer controllable by \s-1EV\s0. The \f(CW\*(C`Glib::EV\*(C'\fR module does
+this.
+.PP
+.Vb 4
+\&  static gint
+\&  event_poll_func (GPollFD *fds, guint nfds, gint timeout)
+\&  {
+\&    int got_events = 0;
+.Ve
+.PP
+.Vb 2
+\&    for (n = 0; n < nfds; ++n)
+\&      // create/start io watcher that sets the relevant bits in fds[n] and increment got_events
+.Ve
+.PP
+.Vb 2
+\&    if (timeout >= 0)
+\&      // create/start timer
+.Ve
+.PP
+.Vb 2
+\&    // poll
+\&    ev_loop (EV_A_ 0);
+.Ve
+.PP
+.Vb 3
+\&    // stop timer again
+\&    if (timeout >= 0)
+\&      ev_timer_stop (EV_A_ &to);
+.Ve
+.PP
+.Vb 3
+\&    // stop io watchers again - their callbacks should have set
+\&    for (n = 0; n < nfds; ++n)
+\&      ev_io_stop (EV_A_ iow [n]);
+.Ve
+.PP
+.Vb 2
+\&    return got_events;
+\&  }
+.Ve

 .ie n .Sh """ev_embed"" \- when one backend isn't enough..."
 .el .Sh "\f(CWev_embed\fP \- when one backend isn't enough..."
 .IX Subsection "ev_embed - when one backend isn't enough..."
 .ie n .Sh """ev_embed"" \- when one backend isn't enough..."
 .el .Sh "\f(CWev_embed\fP \- when one backend isn't enough..."
 .IX Subsection "ev_embed - when one backend isn't enough..."


@@ -1781,6 +2088,9 @@ create it, and if that fails, use the normal loop for everything:
 \&  else
 \&    loop_lo = loop_hi;
 .Ve
 \&  else
 \&    loop_lo = loop_hi;
 .Ve

+.PP
+\fIWatcher-Specific Functions and Data Members\fR
+.IX Subsection "Watcher-Specific Functions and Data Members"

 .IP "ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)" 4
 .IX Item "ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)"
 .PD 0
 .IP "ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)" 4
 .IX Item "ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)"
 .PD 0


@@ -1797,8 +2107,8 @@ if you do not want thta, you need to temporarily stop the embed watcher).
 Make a single, non-blocking sweep over the embedded loop. This works
 similarly to \f(CW\*(C`ev_loop (embedded_loop, EVLOOP_NONBLOCK)\*(C'\fR, but in the most
 apropriate way for embedded loops.
 Make a single, non-blocking sweep over the embedded loop. This works
 similarly to \f(CW\*(C`ev_loop (embedded_loop, EVLOOP_NONBLOCK)\*(C'\fR, but in the most
 apropriate way for embedded loops.

-.IP "struct ev_loop *loop [read\-only]" 4
-.IX Item "struct ev_loop *loop [read-only]"
+.IP "struct ev_loop *other [read\-only]" 4
+.IX Item "struct ev_loop *other [read-only]"

 The embedded event loop.
 .ie n .Sh """ev_fork"" \- the audacity to resume the event loop after a fork"
 .el .Sh "\f(CWev_fork\fP \- the audacity to resume the event loop after a fork"
 The embedded event loop.
 .ie n .Sh """ev_fork"" \- the audacity to resume the event loop after a fork"
 .el .Sh "\f(CWev_fork\fP \- the audacity to resume the event loop after a fork"


@@ -1810,6 +2120,9 @@ event loop blocks next and before \f(CW\*(C`ev_check\*(C'\fR watchers are being
 and only in the child after the fork. If whoever good citizen calling
 \&\f(CW\*(C`ev_default_fork\*(C'\fR cheats and calls it in the wrong process, the fork
 handlers will be invoked, too, of course.
 and only in the child after the fork. If whoever good citizen calling
 \&\f(CW\*(C`ev_default_fork\*(C'\fR cheats and calls it in the wrong process, the fork
 handlers will be invoked, too, of course.

+.PP
+\fIWatcher-Specific Functions and Data Members\fR
+.IX Subsection "Watcher-Specific Functions and Data Members"

 .IP "ev_fork_init (ev_signal *, callback)" 4
 .IX Item "ev_fork_init (ev_signal *, callback)"
 Initialises and configures the fork watcher \- it has no parameters of any
 .IP "ev_fork_init (ev_signal *, callback)" 4
 .IX Item "ev_fork_init (ev_signal *, callback)"
 Initialises and configures the fork watcher \- it has no parameters of any


@@ -1980,13 +2293,22 @@ Example: simple class declaration and watcher initialisation
 \&  ev::io iow;
 \&  iow.set <myclass, &myclass::io_cb> (&obj);
 .Ve
 \&  ev::io iow;
 \&  iow.set <myclass, &myclass::io_cb> (&obj);
 .Ve

-.IP "w\->set (void (*function)(watcher &w, int), void *data = 0)" 4
-.IX Item "w->set (void (*function)(watcher &w, int), void *data = 0)"
+.IP "w\->set<function> (void *data = 0)" 4
+.IX Item "w->set<function> (void *data = 0)"

 Also sets a callback, but uses a static method or plain function as
 callback. The optional \f(CW\*(C`data\*(C'\fR argument will be stored in the watcher's
 \&\f(CW\*(C`data\*(C'\fR member and is free for you to use.
 .Sp
 Also sets a callback, but uses a static method or plain function as
 callback. The optional \f(CW\*(C`data\*(C'\fR argument will be stored in the watcher's
 \&\f(CW\*(C`data\*(C'\fR member and is free for you to use.
 .Sp

+The prototype of the \f(CW\*(C`function\*(C'\fR must be \f(CW\*(C`void (*)(ev::TYPE &w, int)\*(C'\fR.
+.Sp

 See the method\-\f(CW\*(C`set\*(C'\fR above for more details.
 See the method\-\f(CW\*(C`set\*(C'\fR above for more details.

+.Sp
+Example:
+.Sp
+.Vb 2
+\&  static void io_cb (ev::io &w, int revents) { }
+\&  iow.set <io_cb> ();
+.Ve

 .IP "w\->set (struct ev_loop *)" 4
 .IX Item "w->set (struct ev_loop *)"
 Associates a different \f(CW\*(C`struct ev_loop\*(C'\fR with this watcher. You can only
 .IP "w\->set (struct ev_loop *)" 4
 .IX Item "w->set (struct ev_loop *)"
 Associates a different \f(CW\*(C`struct ev_loop\*(C'\fR with this watcher. You can only


@@ -2004,18 +2326,18 @@ constructor already stores the event loop.
 .IP "w\->stop ()" 4
 .IX Item "w->stop ()"
 Stops the watcher if it is active. Again, no \f(CW\*(C`loop\*(C'\fR argument.
 .IP "w\->stop ()" 4
 .IX Item "w->stop ()"
 Stops the watcher if it is active. Again, no \f(CW\*(C`loop\*(C'\fR argument.

-.ie n .IP "w\->again ()       ""ev::timer""\fR, \f(CW""ev::periodic"" only" 4
-.el .IP "w\->again ()       \f(CWev::timer\fR, \f(CWev::periodic\fR only" 4
-.IX Item "w->again ()       ev::timer, ev::periodic only"
+.ie n .IP "w\->again () (""ev::timer""\fR, \f(CW""ev::periodic"" only)" 4
+.el .IP "w\->again () (\f(CWev::timer\fR, \f(CWev::periodic\fR only)" 4
+.IX Item "w->again () (ev::timer, ev::periodic only)"

 For \f(CW\*(C`ev::timer\*(C'\fR and \f(CW\*(C`ev::periodic\*(C'\fR, this invokes the corresponding
 \&\f(CW\*(C`ev_TYPE_again\*(C'\fR function.
 For \f(CW\*(C`ev::timer\*(C'\fR and \f(CW\*(C`ev::periodic\*(C'\fR, this invokes the corresponding
 \&\f(CW\*(C`ev_TYPE_again\*(C'\fR function.

-.ie n .IP "w\->sweep ()       ""ev::embed"" only" 4
-.el .IP "w\->sweep ()       \f(CWev::embed\fR only" 4
-.IX Item "w->sweep ()       ev::embed only"
+.ie n .IP "w\->sweep () (""ev::embed"" only)" 4
+.el .IP "w\->sweep () (\f(CWev::embed\fR only)" 4
+.IX Item "w->sweep () (ev::embed only)"

 Invokes \f(CW\*(C`ev_embed_sweep\*(C'\fR.
 Invokes \f(CW\*(C`ev_embed_sweep\*(C'\fR.

-.ie n .IP "w\->update ()      ""ev::stat"" only" 4
-.el .IP "w\->update ()      \f(CWev::stat\fR only" 4
-.IX Item "w->update ()      ev::stat only"
+.ie n .IP "w\->update () (""ev::stat"" only)" 4
+.el .IP "w\->update () (\f(CWev::stat\fR only)" 4
+.IX Item "w->update () (ev::stat only)"

 Invokes \f(CW\*(C`ev_stat_stat\*(C'\fR.
 .RE
 .RS 4
 Invokes \f(CW\*(C`ev_stat_stat\*(C'\fR.
 .RE
 .RS 4


@@ -2049,9 +2371,9 @@ the constructor.
 .Ve
 .SH "MACRO MAGIC"
 .IX Header "MACRO MAGIC"
 .Ve
 .SH "MACRO MAGIC"
 .IX Header "MACRO MAGIC"

-Libev can be compiled with a variety of options, the most fundemantal is
-\&\f(CW\*(C`EV_MULTIPLICITY\*(C'\fR. This option determines whether (most) functions and
-callbacks have an initial \f(CW\*(C`struct ev_loop *\*(C'\fR argument.
+Libev can be compiled with a variety of options, the most fundamantal
+of which is \f(CW\*(C`EV_MULTIPLICITY\*(C'\fR. This option determines whether (most)
+functions and callbacks have an initial \f(CW\*(C`struct ev_loop *\*(C'\fR argument.

 .PP
 To make it easier to write programs that cope with either variant, the
 following macros are defined:
 .PP
 To make it easier to write programs that cope with either variant, the
 following macros are defined:


@@ -2120,7 +2442,7 @@ applications. Examples of applications that embed it include the Deliantra
 Game Server, the \s-1EV\s0 perl module, the \s-1GNU\s0 Virtual Private Ethernet (gvpe)
 and rxvt\-unicode.
 .PP
 Game Server, the \s-1EV\s0 perl module, the \s-1GNU\s0 Virtual Private Ethernet (gvpe)
 and rxvt\-unicode.
 .PP

-The goal is to enable you to just copy the neecssary files into your
+The goal is to enable you to just copy the necessary files into your

 source directory without having to change even a single line in them, so
 you can easily upgrade by simply copying (or having a checked-out copy of
 libev somewhere in your source tree).
 source directory without having to change even a single line in them, so
 you can easily upgrade by simply copying (or having a checked-out copy of
 libev somewhere in your source tree).


@@ -2235,7 +2557,7 @@ If defined to be \f(CW1\fR, libev will try to detect the availability of the
 monotonic clock option at both compiletime and runtime. Otherwise no use
 of the monotonic clock option will be attempted. If you enable this, you
 usually have to link against librt or something similar. Enabling it when
 monotonic clock option at both compiletime and runtime. Otherwise no use
 of the monotonic clock option will be attempted. If you enable this, you
 usually have to link against librt or something similar. Enabling it when

-the functionality isn't available is safe, though, althoguh you have
+the functionality isn't available is safe, though, although you have

 to make sure you link against any libraries where the \f(CW\*(C`clock_gettime\*(C'\fR
 function is hiding in (often \fI\-lrt\fR).
 .IP "\s-1EV_USE_REALTIME\s0" 4
 to make sure you link against any libraries where the \f(CW\*(C`clock_gettime\*(C'\fR
 function is hiding in (often \fI\-lrt\fR).
 .IP "\s-1EV_USE_REALTIME\s0" 4


@@ -2244,8 +2566,12 @@ If defined to be \f(CW1\fR, libev will try to detect the availability of the
 realtime clock option at compiletime (and assume its availability at
 runtime if successful). Otherwise no use of the realtime clock option will
 be attempted. This effectively replaces \f(CW\*(C`gettimeofday\*(C'\fR by \f(CW\*(C`clock_get
 realtime clock option at compiletime (and assume its availability at
 runtime if successful). Otherwise no use of the realtime clock option will
 be attempted. This effectively replaces \f(CW\*(C`gettimeofday\*(C'\fR by \f(CW\*(C`clock_get

-(CLOCK_REALTIME, ...)\*(C'\fR and will not normally affect correctness. See tzhe note about libraries
-in the description of \f(CW\*(C`EV_USE_MONOTONIC\*(C'\fR, though.
+(CLOCK_REALTIME, ...)\*(C'\fR and will not normally affect correctness. See the
+note about libraries in the description of \f(CW\*(C`EV_USE_MONOTONIC\*(C'\fR, though.
+.IP "\s-1EV_USE_NANOSLEEP\s0" 4
+.IX Item "EV_USE_NANOSLEEP"
+If defined to be \f(CW1\fR, libev will assume that \f(CW\*(C`nanosleep ()\*(C'\fR is available
+and will use it for delays. Otherwise it will use \f(CW\*(C`select ()\*(C'\fR.

 .IP "\s-1EV_USE_SELECT\s0" 4
 .IX Item "EV_USE_SELECT"
 If undefined or defined to be \f(CW1\fR, libev will compile in support for the
 .IP "\s-1EV_USE_SELECT\s0" 4
 .IX Item "EV_USE_SELECT"
 If undefined or defined to be \f(CW1\fR, libev will compile in support for the


@@ -2415,10 +2741,40 @@ For example, the perl \s-1EV\s0 module uses something like this:
 .PD
 Can be used to change the callback member declaration in each watcher,
 and the way callbacks are invoked and set. Must expand to a struct member
 .PD
 Can be used to change the callback member declaration in each watcher,
 and the way callbacks are invoked and set. Must expand to a struct member

-definition and a statement, respectively. See the \fIev.v\fR header file for
+definition and a statement, respectively. See the \fIev.h\fR header file for

 their default definitions. One possible use for overriding these is to
 avoid the \f(CW\*(C`struct ev_loop *\*(C'\fR as first argument in all cases, or to use
 method calls instead of plain function calls in \*(C+.
 their default definitions. One possible use for overriding these is to
 avoid the \f(CW\*(C`struct ev_loop *\*(C'\fR as first argument in all cases, or to use
 method calls instead of plain function calls in \*(C+.

+.Sh "\s-1EXPORTED\s0 \s-1API\s0 \s-1SYMBOLS\s0"
+.IX Subsection "EXPORTED API SYMBOLS"
+If you need to re-export the \s-1API\s0 (e.g. via a dll) and you need a list of
+exported symbols, you can use the provided \fISymbol.*\fR files which list
+all public symbols, one per line:
+.Sp
+.Vb 2
+\&  Symbols.ev      for libev proper
+\&  Symbols.event   for the libevent emulation
+.Ve
+.Sp
+This can also be used to rename all public symbols to avoid clashes with
+multiple versions of libev linked together (which is obviously bad in
+itself, but sometimes it is inconvinient to avoid this).
+.Sp
+A sed command like this will create wrapper \f(CW\*(C`#define\*(C'\fR's that you need to
+include before including \fIev.h\fR:
+.Sp
+.Vb 1
+\&   <Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h
+.Ve
+.Sp
+This would create a file \fIwrap.h\fR which essentially looks like this:
+.Sp
+.Vb 4
+\&   #define ev_backend     myprefix_ev_backend
+\&   #define ev_check_start myprefix_ev_check_start
+\&   #define ev_check_stop  myprefix_ev_check_stop
+\&   ...
+.Ve

 .Sh "\s-1EXAMPLES\s0"
 .IX Subsection "EXAMPLES"
 For a real-world example of a program the includes libev
 .Sh "\s-1EXAMPLES\s0"
 .IX Subsection "EXAMPLES"
 For a real-world example of a program the includes libev