X-Git-Url: https://git.llucax.com/software/libev.git/blobdiff_plain/01e94682098c6af711d3953e0e99eaa4d4a09d74..8f05d352659f0ea4f97f55ccfadfc322b72966bf:/ev.pod?ds=sidebyside

diff --git a/ev.pod b/ev.pod
index 74100e4..901d76e 100644
--- a/ev.pod
+++ b/ev.pod
@@ -50,6 +50,10 @@ libev - a high performance full-featured event loop written in C
 
 =head1 DESCRIPTION
 
+The newest version of this document is also available as a html-formatted
+web page you might find easier to navigate when reading it for the first
+time: L<http://cvs.schmorp.de/libev/ev.html>.
+
 Libev is an event loop: you register interest in certain events (such as a
 file descriptor being readable or a timeout occuring), and it will manage
 these event sources and provide your program with events.
@@ -96,7 +100,9 @@ Libev represents time as a single floating point number, representing the
 the beginning of 1970, details are complicated, don't ask). This type is
 called C<ev_tstamp>, which is what you should use too. It usually aliases
 to the C<double> type in C, and when you need to do any calculations on
-it, you should treat it as such.
+it, you should treat it as some floatingpoint value. Unlike the name
+component C<stamp> might indicate, it is also used for time differences
+throughout libev.
 
 =head1 GLOBAL FUNCTIONS
 
@@ -115,14 +121,17 @@ you actually want to know.
 
 =item int ev_version_minor ()
 
-You can find out the major and minor version numbers of the library
+You can find out the major and minor ABI version numbers of the library
 you linked against by calling the functions C<ev_version_major> and
 C<ev_version_minor>. If you want, you can compare against the global
 symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the
 version of the library your program was compiled against.
 
+These version numbers refer to the ABI version of the library, not the
+release version.
+
 Usually, it's a good idea to terminate if the major versions mismatch,
-as this indicates an incompatible change.  Minor versions are usually
+as this indicates an incompatible change. Minor versions are usually
 compatible to older versions, so a larger minor version alone is usually
 not a problem.
 
@@ -276,7 +285,7 @@ enabling this flag.
 
 This works by calling C<getpid ()> on every iteration of the loop,
 and thus this might slow down your event loop if you do a lot of loop
-iterations and little real work, but is usually not noticable (on my
+iterations and little real work, but is usually not noticeable (on my
 Linux system for example, C<getpid> is actually a simple 5-insn sequence
 without a syscall and thus I<very> fast, but my Linux system also has
 C<pthread_atfork> which is even faster).
@@ -397,9 +406,18 @@ etc.). None of the active event watchers will be stopped in the normal
 sense, so e.g. C<ev_is_active> might still return true. It is your
 responsibility to either stop all watchers cleanly yoursef I<before>
 calling this function, or cope with the fact afterwards (which is usually
-the easiest thing, youc na just ignore the watchers and/or C<free ()> them
+the easiest thing, you can just ignore the watchers and/or C<free ()> them
 for example).
 
+Note that certain global state, such as signal state, will not be freed by
+this function, and related watchers (such as signal and child watchers)
+would need to be stopped manually.
+
+In general it is not advisable to call this function except in the
+rare occasion where you really need to free e.g. the signal handling
+pipe fds. If you need dynamically allocated loops it is better to use
+C<ev_loop_new> and C<ev_loop_destroy>).
+
 =item ev_loop_destroy (loop)
 
 Like C<ev_default_destroy>, but destroys an event loop created by an
@@ -432,6 +450,16 @@ Like C<ev_default_fork>, but acts on an event loop created by
 C<ev_loop_new>. Yes, you have to call this on every allocated event loop
 after fork, and how you do this is entirely your own problem.
 
+=item unsigned int ev_loop_count (loop)
+
+Returns the count of loop iterations for the loop, which is identical to
+the number of times libev did poll for new events. It starts at C<0> and
+happily wraps around with enough iterations.
+
+This value can sometimes be useful as a generation counter of sorts (it
+"ticks" the number of loop iterations), as it roughly corresponds with
+C<ev_prepare> and C<ev_check> calls.
+
 =item unsigned int ev_backend (loop)
 
 Returns one of the C<EVBACKEND_*> flags indicating the event backend in
@@ -474,8 +502,9 @@ usually a better approach for this kind of thing.
 
 Here are the gory details of what C<ev_loop> does:
 
+   - Before the first iteration, call any pending watchers.
    * If there are no active watchers (reference count is zero), return.
-   - Queue prepare watchers and then call all outstanding watchers.
+   - Queue all prepare watchers and then call all outstanding watchers.
    - If we have been forked, recreate the kernel state.
    - Update the kernel state with all outstanding changes.
    - Update the "event loop time".
@@ -724,8 +753,9 @@ it.
 Returns a true value iff the watcher is pending, (i.e. it has outstanding
 events but its callback has not yet been invoked). As long as a watcher
 is pending (but not active) you must not call an init function on it (but
-C<ev_TYPE_set> is safe) and you must make sure the watcher is available to
-libev (e.g. you cnanot C<free ()> it).
+C<ev_TYPE_set> is safe), you must not change its priority, and you must
+make sure the watcher is available to libev (e.g. you cannot C<free ()>
+it).
 
 =item callback ev_cb (ev_TYPE *watcher)
 
@@ -736,6 +766,46 @@ Returns the callback currently set on the watcher.
 Change the callback. You can change the callback at virtually any time
 (modulo threads).
 
+=item ev_set_priority (ev_TYPE *watcher, priority)
+
+=item int ev_priority (ev_TYPE *watcher)
+
+Set and query the priority of the watcher. The priority is a small
+integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
+(default: C<-2>). Pending watchers with higher priority will be invoked
+before watchers with lower priority, but priority will not keep watchers
+from being executed (except for C<ev_idle> watchers).
+
+This means that priorities are I<only> used for ordering callback
+invocation after new events have been received. This is useful, for
+example, to reduce latency after idling, or more often, to bind two
+watchers on the same event and make sure one is called first.
+
+If you need to suppress invocation when higher priority events are pending
+you need to look at C<ev_idle> watchers, which provide this functionality.
+
+You I<must not> change the priority of a watcher as long as it is active or
+pending.
+
+The default priority used by watchers when no priority has been set is
+always C<0>, which is supposed to not be too high and not be too low :).
+
+Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
+fine, as long as you do not mind that the priority value you query might
+or might not have been adjusted to be within valid range.
+
+=item ev_invoke (loop, ev_TYPE *watcher, int revents)
+
+Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
+C<loop> nor C<revents> need to be valid as long as the watcher callback
+can deal with that fact.
+
+=item int ev_clear_pending (loop, ev_TYPE *watcher)
+
+If the watcher is pending, this function returns clears its pending status
+and returns its C<revents> bitset (as if its callback was invoked). If the
+watcher isn't pending it does nothing and returns C<0>.
+
 =back
 
 
@@ -850,10 +920,34 @@ C<EAGAIN> is far preferable to a program hanging until some data arrives.
 
 If you cannot run the fd in non-blocking mode (for example you should not
 play around with an Xlib connection), then you have to seperately re-test
-wether a file descriptor is really ready with a known-to-be good interface
+whether a file descriptor is really ready with a known-to-be good interface
 such as poll (fortunately in our Xlib example, Xlib already does this on
 its own, so its quite safe to use).
 
+=head3 The special problem of disappearing file descriptors
+
+Some backends (e.g kqueue, epoll) need to be told about closing a file
+descriptor (either by calling C<close> explicitly or by any other means,
+such as C<dup>). The reason is that you register interest in some file
+descriptor, but when it goes away, the operating system will silently drop
+this interest. If another file descriptor with the same number then is
+registered with libev, there is no efficient way to see that this is, in
+fact, a different file descriptor.
+
+To avoid having to explicitly tell libev about such cases, libev follows
+the following policy:  Each time C<ev_io_set> is being called, libev
+will assume that this is potentially a new file descriptor, otherwise
+it is assumed that the file descriptor stays the same. That means that
+you I<have> to call C<ev_io_set> (or C<ev_io_init>) when you change the
+descriptor even if the file descriptor number itself did not change.
+
+This is how one would do it normally anyway, the important point is that
+the libev application should not optimise around libev but should leave
+optimisations to libev.
+
+
+=head3 Watcher-Specific Functions
+
 =over 4
 
 =item ev_io_init (ev_io *, callback, int fd, int events)
@@ -916,6 +1010,8 @@ The callback is guarenteed to be invoked only when its timeout has passed,
 but if multiple timers become ready during the same loop iteration then
 order of execution is undefined.
 
+=head3 Watcher-Specific Functions and Data Members
+
 =over 4
 
 =item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
@@ -1020,16 +1116,18 @@ to trigger "at" some specific point in time. For example, if you tell a
 periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()
 + 10.>) and then reset your system clock to the last year, then it will
 take a year to trigger the event (unlike an C<ev_timer>, which would trigger
-roughly 10 seconds later and of course not if you reset your system time
-again).
+roughly 10 seconds later).
 
 They can also be used to implement vastly more complex timers, such as
-triggering an event on eahc midnight, local time.
+triggering an event on each midnight, local time or other, complicated,
+rules.
 
 As with timers, the callback is guarenteed to be invoked only when the
 time (C<at>) has been passed, but if multiple periodic timers become ready
 during the same loop iteration then order of execution is undefined.
 
+=head3 Watcher-Specific Functions and Data Members
+
 =over 4
 
 =item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)
@@ -1041,18 +1139,18 @@ operation, and we will explain them from simplest to complex:
 
 =over 4
 
-=item * absolute timer (interval = reschedule_cb = 0)
+=item * absolute timer (at = time, interval = reschedule_cb = 0)
 
 In this configuration the watcher triggers an event at the wallclock time
 C<at> and doesn't repeat. It will not adjust when a time jump occurs,
 that is, if it is to be run at January 1st 2011 then it will run when the
 system time reaches or surpasses this time.
 
-=item * non-repeating interval timer (interval > 0, reschedule_cb = 0)
+=item * non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
 
 In this mode the watcher will always be scheduled to time out at the next
-C<at + N * interval> time (for some integer N) and then repeat, regardless
-of any time jumps.
+C<at + N * interval> time (for some integer N, which can also be negative)
+and then repeat, regardless of any time jumps.
 
 This can be used to create timers that do not drift with respect to system
 time:
@@ -1068,7 +1166,11 @@ Another way to think about it (for the mathematically inclined) is that
 C<ev_periodic> will try to run the callback in this mode at the next possible
 time where C<time = at (mod interval)>, regardless of any time jumps.
 
-=item * manual reschedule mode (reschedule_cb = callback)
+For numerical stability it is preferable that the C<at> value is near
+C<ev_now ()> (the current time), but there is no range requirement for
+this value.
+
+=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)
 
 In this mode the values for C<interval> and C<at> are both being
 ignored. Instead, each time the periodic watcher gets scheduled, the
@@ -1078,7 +1180,7 @@ current time as second argument.
 NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,
 ever, or make any event loop modifications>. If you need to stop it,
 return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by
-starting a prepare watcher).
+starting an C<ev_prepare> watcher, which is legal).
 
 Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,
 ev_tstamp now)>, e.g.:
@@ -1111,6 +1213,14 @@ when you changed some parameters or the reschedule callback would return
 a different time than the last time it was called (e.g. in a crond like
 program when the crontabs have changed).
 
+=item ev_tstamp offset [read-write]
+
+When repeating, this contains the offset value, otherwise this is the
+absolute point in time (the C<at> value passed to C<ev_periodic_set>).
+
+Can be modified any time, but changes only take effect when the periodic
+timer fires or C<ev_periodic_again> is being called.
+
 =item ev_tstamp interval [read-write]
 
 The current interval value. Can be modified any time, but changes only
@@ -1123,6 +1233,11 @@ The current reschedule callback, or C<0>, if this functionality is
 switched off. Can be changed any time, but changes only take effect when
 the periodic timer fires or C<ev_periodic_again> is being called.
 
+=item ev_tstamp at [read-only]
+
+When active, contains the absolute time that the watcher is supposed to
+trigger next.
+
 =back
 
 Example: Call a callback every hour, or, more precisely, whenever the
@@ -1173,6 +1288,8 @@ as you don't register any with libev). Similarly, when the last signal
 watcher for a signal is stopped libev will reset the signal handler to
 SIG_DFL (regardless of what it was set to before).
 
+=head3 Watcher-Specific Functions and Data Members
+
 =over 4
 
 =item ev_signal_init (ev_signal *, callback, int signum)
@@ -1194,6 +1311,8 @@ The signal the watcher watches out for.
 Child watchers trigger when your process receives a SIGCHLD in response to
 some child status changes (most typically when a child of yours dies).
 
+=head3 Watcher-Specific Functions and Data Members
+
 =over 4
 
 =item ev_child_init (ev_child *, callback, int pid)
@@ -1271,6 +1390,8 @@ to fall back to regular polling again even with inotify, but changes are
 usually detected immediately, and if the file exists there will be no
 polling.
 
+=head3 Watcher-Specific Functions and Data Members
+
 =over 4
 
 =item ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)
@@ -1343,13 +1464,16 @@ Example: Watch C</etc/passwd> for attribute changes.
 
 =head2 C<ev_idle> - when you've got nothing better to do...
 
-Idle watchers trigger events when there are no other events are pending
-(prepare, check and other idle watchers do not count). That is, as long
-as your process is busy handling sockets or timeouts (or even signals,
-imagine) it will not be triggered. But when your process is idle all idle
-watchers are being called again and again, once per event loop iteration -
-until stopped, that is, or your process receives more events and becomes
-busy.
+Idle watchers trigger events when no other events of the same or higher
+priority are pending (prepare, check and other idle watchers do not
+count).
+
+That is, as long as your process is busy handling sockets or timeouts
+(or even signals, imagine) of the same or higher priority it will not be
+triggered. But when your process is idle (or only lower-priority watchers
+are pending), the idle watchers are being called once per event loop
+iteration - until stopped, that is, or your process receives more events
+and becomes busy again with higher priority stuff.
 
 The most noteworthy effect is that as long as any idle watchers are
 active, the process will not block when waiting for new events.
@@ -1359,6 +1483,8 @@ effect on its own sometimes), idle watchers are a good place to do
 "pseudo-background processing", or delay processing stuff to after the
 event loop has handled all outstanding events.
 
+=head3 Watcher-Specific Functions and Data Members
+
 =over 4
 
 =item ev_idle_init (ev_signal *, callback)
@@ -1425,6 +1551,18 @@ of lower priority, but only once, using idle watchers to keep the event
 loop from blocking if lower-priority coroutines are active, thus mapping
 low-priority coroutines to idle/background tasks).
 
+It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
+priority, to ensure that they are being run before any other watchers
+after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
+too) should not activate ("feed") events into libev. While libev fully
+supports this, they will be called before other C<ev_check> watchers did
+their job. As C<ev_check> watchers are often used to embed other event
+loops those other event loops might be in an unusable state until their
+C<ev_check> watcher ran (always remind yourself to coexist peacefully with
+others).
+
+=head3 Watcher-Specific Functions and Data Members
+
 =over 4
 
 =item ev_prepare_init (ev_prepare *, callback)
@@ -1437,10 +1575,18 @@ macros, but using them is utterly, utterly and completely pointless.
 
 =back
 
-Example: To include a library such as adns, you would add IO watchers
-and a timeout watcher in a prepare handler, as required by libadns, and
-in a check watcher, destroy them and call into libadns. What follows is
-pseudo-code only of course:
+There are a number of principal ways to embed other event loops or modules
+into libev. Here are some ideas on how to include libadns into libev
+(there is a Perl module named C<EV::ADNS> that does this, which you could
+use for an actually working example. Another Perl module named C<EV::Glib>
+embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV
+into the Glib event loop).
+
+Method 1: Add IO watchers and a timeout watcher in a prepare handler,
+and in a check watcher, destroy them and call into libadns. What follows
+is pseudo-code only of course. This requires you to either use a low
+priority for the check watcher or use C<ev_clear_pending> explicitly, as
+the callbacks for the IO/timeout watchers might not have been called yet.
 
   static ev_io iow [nfd];
   static ev_timer tw;
@@ -1448,11 +1594,6 @@ pseudo-code only of course:
   static void
   io_cb (ev_loop *loop, ev_io *w, int revents)
   {
-    // set the relevant poll flags
-    // could also call adns_processreadable etc. here
-    struct pollfd *fd = (struct pollfd *)w->data;
-    if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
-    if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
   }
 
   // create io watchers for each fd and a timer before blocking
@@ -1468,7 +1609,7 @@ pseudo-code only of course:
     ev_timer_init (&tw, 0, timeout * 1e-3);
     ev_timer_start (loop, &tw);
 
-    // create on ev_io per pollfd
+    // create one ev_io per pollfd
     for (int i = 0; i < nfd; ++i)
       {
         ev_io_init (iow + i, io_cb, fds [i].fd,
@@ -1476,7 +1617,6 @@ pseudo-code only of course:
            | (fds [i].events & POLLOUT ? EV_WRITE : 0)));
 
         fds [i].revents = 0;
-        iow [i].data = fds + i;
         ev_io_start (loop, iow + i);
       }
   }
@@ -1488,11 +1628,80 @@ pseudo-code only of course:
     ev_timer_stop (loop, &tw);
 
     for (int i = 0; i < nfd; ++i)
-      ev_io_stop (loop, iow + i);
+      {
+        // set the relevant poll flags
+        // could also call adns_processreadable etc. here
+        struct pollfd *fd = fds + i;
+        int revents = ev_clear_pending (iow + i);
+        if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
+        if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
+
+        // now stop the watcher
+        ev_io_stop (loop, iow + i);
+      }
 
     adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
   }
 
+Method 2: This would be just like method 1, but you run C<adns_afterpoll>
+in the prepare watcher and would dispose of the check watcher.
+
+Method 3: If the module to be embedded supports explicit event
+notification (adns does), you can also make use of the actual watcher
+callbacks, and only destroy/create the watchers in the prepare watcher.
+
+  static void
+  timer_cb (EV_P_ ev_timer *w, int revents)
+  {
+    adns_state ads = (adns_state)w->data;
+    update_now (EV_A);
+
+    adns_processtimeouts (ads, &tv_now);
+  }
+
+  static void
+  io_cb (EV_P_ ev_io *w, int revents)
+  {
+    adns_state ads = (adns_state)w->data;
+    update_now (EV_A);
+
+    if (revents & EV_READ ) adns_processreadable  (ads, w->fd, &tv_now);
+    if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
+  }
+
+  // do not ever call adns_afterpoll
+
+Method 4: Do not use a prepare or check watcher because the module you
+want to embed is too inflexible to support it. Instead, youc na override
+their poll function.  The drawback with this solution is that the main
+loop is now no longer controllable by EV. The C<Glib::EV> module does
+this.
+
+  static gint
+  event_poll_func (GPollFD *fds, guint nfds, gint timeout)
+  {
+    int got_events = 0;
+
+    for (n = 0; n < nfds; ++n)
+      // create/start io watcher that sets the relevant bits in fds[n] and increment got_events
+
+    if (timeout >= 0)
+      // create/start timer
+
+    // poll
+    ev_loop (EV_A_ 0);
+
+    // stop timer again
+    if (timeout >= 0)
+      ev_timer_stop (EV_A_ &to);
+
+    // stop io watchers again - their callbacks should have set
+    for (n = 0; n < nfds; ++n)
+      ev_io_stop (EV_A_ iow [n]);
+
+    return got_events;
+  }
+
 
 =head2 C<ev_embed> - when one backend isn't enough...
 
@@ -1564,6 +1773,8 @@ create it, and if that fails, use the normal loop for everything:
   else
     loop_lo = loop_hi;
 
+=head3 Watcher-Specific Functions and Data Members
+
 =over 4
 
 =item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
@@ -1599,6 +1810,8 @@ and only in the child after the fork. If whoever good citizen calling
 C<ev_default_fork> cheats and calls it in the wrong process, the fork
 handlers will be invoked, too, of course.
 
+=head3 Watcher-Specific Functions and Data Members
+
 =over 4
 
 =item ev_fork_init (ev_signal *, callback)
@@ -1704,12 +1917,21 @@ To use it,
    
   #include <ev++.h>
 
-(it is not installed by default). This automatically includes F<ev.h>
-and puts all of its definitions (many of them macros) into the global
-namespace. All C++ specific things are put into the C<ev> namespace.
+This automatically includes F<ev.h> and puts all of its definitions (many
+of them macros) into the global namespace. All C++ specific things are
+put into the C<ev> namespace. It should support all the same embedding
+options as F<ev.h>, most notably C<EV_MULTIPLICITY>.
+
+Care has been taken to keep the overhead low. The only data member the C++
+classes add (compared to plain C-style watchers) is the event loop pointer
+that the watcher is associated with (or no additional members at all if
+you disable C<EV_MULTIPLICITY> when embedding libev).
 
-It should support all the same embedding options as F<ev.h>, most notably
-C<EV_MULTIPLICITY>.
+Currently, functions, and static and non-static member functions can be
+used as callbacks. Other types should be easy to add as long as they only
+need one additional pointer for context. If you need support for other
+types of functors please contact the author (preferably after implementing
+it).
 
 Here is a list of things available in the C<ev> namespace:
 
@@ -1735,20 +1957,65 @@ All of those classes have these methods:
 
 =over 4
 
-=item ev::TYPE::TYPE (object *, object::method *)
+=item ev::TYPE::TYPE ()
 
-=item ev::TYPE::TYPE (object *, object::method *, struct ev_loop *)
+=item ev::TYPE::TYPE (struct ev_loop *)
 
 =item ev::TYPE::~TYPE
 
-The constructor takes a pointer to an object and a method pointer to
-the event handler callback to call in this class. The constructor calls
-C<ev_init> for you, which means you have to call the C<set> method
-before starting it. If you do not specify a loop then the constructor
-automatically associates the default loop with this watcher.
+The constructor (optionally) takes an event loop to associate the watcher
+with. If it is omitted, it will use C<EV_DEFAULT>.
+
+The constructor calls C<ev_init> for you, which means you have to call the
+C<set> method before starting it.
+
+It will not set a callback, however: You have to call the templated C<set>
+method to set a callback before you can start the watcher.
+
+(The reason why you have to use a method is a limitation in C++ which does
+not allow explicit template arguments for constructors).
 
 The destructor automatically stops the watcher if it is active.
 
+=item w->set<class, &class::method> (object *)
+
+This method sets the callback method to call. The method has to have a
+signature of C<void (*)(ev_TYPE &, int)>, it receives the watcher as
+first argument and the C<revents> as second. The object must be given as
+parameter and is stored in the C<data> member of the watcher.
+
+This method synthesizes efficient thunking code to call your method from
+the C callback that libev requires. If your compiler can inline your
+callback (i.e. it is visible to it at the place of the C<set> call and
+your compiler is good :), then the method will be fully inlined into the
+thunking function, making it as fast as a direct C callback.
+
+Example: simple class declaration and watcher initialisation
+
+  struct myclass
+  {
+    void io_cb (ev::io &w, int revents) { }
+  }
+
+  myclass obj;
+  ev::io iow;
+  iow.set <myclass, &myclass::io_cb> (&obj);
+
+=item w->set<function> (void *data = 0)
+
+Also sets a callback, but uses a static method or plain function as
+callback. The optional C<data> argument will be stored in the watcher's
+C<data> member and is free for you to use.
+
+The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.
+
+See the method-C<set> above for more details.
+
+Example:
+
+  static void io_cb (ev::io &w, int revents) { }
+  iow.set <io_cb> ();
+
 =item w->set (struct ev_loop *)
 
 Associates a different C<struct ev_loop> with this watcher. You can only
@@ -1757,28 +2024,29 @@ do this when the watcher is inactive (and not pending either).
 =item w->set ([args])
 
 Basically the same as C<ev_TYPE_set>, with the same args. Must be
-called at least once.  Unlike the C counterpart, an active watcher gets
-automatically stopped and restarted.
+called at least once. Unlike the C counterpart, an active watcher gets
+automatically stopped and restarted when reconfiguring it with this
+method.
 
 =item w->start ()
 
-Starts the watcher. Note that there is no C<loop> argument as the
-constructor already takes the loop.
+Starts the watcher. Note that there is no C<loop> argument, as the
+constructor already stores the event loop.
 
 =item w->stop ()
 
 Stops the watcher if it is active. Again, no C<loop> argument.
 
-=item w->again ()       C<ev::timer>, C<ev::periodic> only
+=item w->again () (C<ev::timer>, C<ev::periodic> only)
 
 For C<ev::timer> and C<ev::periodic>, this invokes the corresponding
 C<ev_TYPE_again> function.
 
-=item w->sweep ()       C<ev::embed> only
+=item w->sweep () (C<ev::embed> only)
 
 Invokes C<ev_embed_sweep>.
 
-=item w->update ()      C<ev::stat> only
+=item w->update () (C<ev::stat> only)
 
 Invokes C<ev_stat_stat>.
 
@@ -1798,18 +2066,19 @@ the constructor.
   }
 
   myclass::myclass (int fd)
-  : io   (this, &myclass::io_cb),
-    idle (this, &myclass::idle_cb)
   {
+    io  .set <myclass, &myclass::io_cb  > (this);
+    idle.set <myclass, &myclass::idle_cb> (this);
+
     io.start (fd, ev::READ);
   }
 
 
 =head1 MACRO MAGIC
 
-Libev can be compiled with a variety of options, the most fundemantal is
-C<EV_MULTIPLICITY>. This option determines wether (most) functions and
-callbacks have an initial C<struct ev_loop *> argument.
+Libev can be compiled with a variety of options, the most fundamantal
+of which is C<EV_MULTIPLICITY>. This option determines whether (most)
+functions and callbacks have an initial C<struct ev_loop *> argument.
 
 To make it easier to write programs that cope with either variant, the
 following macros are defined:
@@ -1852,7 +2121,7 @@ loop, if multiple loops are supported ("ev loop default").
 =back
 
 Example: Declare and initialise a check watcher, utilising the above
-macros so it will work regardless of wether multiple loops are supported
+macros so it will work regardless of whether multiple loops are supported
 or not.
 
   static void
@@ -2087,12 +2356,35 @@ additional independent event loops. Otherwise there will be no support
 for multiple event loops and there is no first event loop pointer
 argument. Instead, all functions act on the single default loop.
 
+=item EV_MINPRI
+
+=item EV_MAXPRI
+
+The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
+C<EV_MAXPRI>, but otherwise there are no non-obvious limitations. You can
+provide for more priorities by overriding those symbols (usually defined
+to be C<-2> and C<2>, respectively).
+
+When doing priority-based operations, libev usually has to linearly search
+all the priorities, so having many of them (hundreds) uses a lot of space
+and time, so using the defaults of five priorities (-2 .. +2) is usually
+fine.
+
+If your embedding app does not need any priorities, defining these both to
+C<0> will save some memory and cpu.
+
 =item EV_PERIODIC_ENABLE
 
 If undefined or defined to be C<1>, then periodic timers are supported. If
 defined to be C<0>, then they are not. Disabling them saves a few kB of
 code.
 
+=item EV_IDLE_ENABLE
+
+If undefined or defined to be C<1>, then idle watchers are supported. If
+defined to be C<0>, then they are not. Disabling them saves a few kB of
+code.
+
 =item EV_EMBED_ENABLE
 
 If undefined or defined to be C<1>, then embed watchers are supported. If
@@ -2192,24 +2484,51 @@ In this section the complexities of (many of) the algorithms used inside
 libev will be explained. For complexity discussions about backends see the
 documentation for C<ev_default_init>.
 
+All of the following are about amortised time: If an array needs to be
+extended, libev needs to realloc and move the whole array, but this
+happens asymptotically never with higher number of elements, so O(1) might
+mean it might do a lengthy realloc operation in rare cases, but on average
+it is much faster and asymptotically approaches constant time.
+
 =over 4
 
 =item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
 
+This means that, when you have a watcher that triggers in one hour and
+there are 100 watchers that would trigger before that then inserting will
+have to skip those 100 watchers.
+
 =item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)
 
+That means that for changing a timer costs less than removing/adding them
+as only the relative motion in the event queue has to be paid for.
+
 =item Starting io/check/prepare/idle/signal/child watchers: O(1)
 
+These just add the watcher into an array or at the head of a list.
 =item Stopping check/prepare/idle watchers: O(1)
 
 =item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
 
+These watchers are stored in lists then need to be walked to find the
+correct watcher to remove. The lists are usually short (you don't usually
+have many watchers waiting for the same fd or signal).
+
 =item Finding the next timer per loop iteration: O(1)
 
 =item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
 
+A change means an I/O watcher gets started or stopped, which requires
+libev to recalculate its status (and possibly tell the kernel).
+
 =item Activating one watcher: O(1)
 
+=item Priority handling: O(number_of_priorities)
+
+Priorities are implemented by allocating some space for each
+priority. When doing priority-based operations, libev usually has to
+linearly search all the priorities.
+
 =back