X-Git-Url: https://git.llucax.com/software/libev.git/blobdiff_plain/5466167e0504f6fd929074dda89e770d4abfd3c3..73861ad6c4342633fff7dcd5913bcaa2749dba09:/ev.pod diff --git a/ev.pod b/ev.pod index 3ad52c0..6e39af3 100644 --- a/ev.pod +++ b/ev.pod @@ -55,7 +55,7 @@ web page you might find easier to navigate when reading it for the first time: L. Libev is an event loop: you register interest in certain events (such as a -file descriptor being readable or a timeout occuring), and it will manage +file descriptor being readable or a timeout occurring), and it will manage these event sources and provide your program with events. To do this, it must take more or less complete control over your process @@ -100,7 +100,9 @@ Libev represents time as a single floating point number, representing the the beginning of 1970, details are complicated, don't ask). This type is called C, which is what you should use too. It usually aliases to the C type in C, and when you need to do any calculations on -it, you should treat it as such. +it, you should treat it as some floatingpoint value. Unlike the name +component C might indicate, it is also used for time differences +throughout libev. =head1 GLOBAL FUNCTIONS @@ -119,14 +121,17 @@ you actually want to know. =item int ev_version_minor () -You can find out the major and minor version numbers of the library +You can find out the major and minor ABI version numbers of the library you linked against by calling the functions C and C. If you want, you can compare against the global symbols C and C, which specify the version of the library your program was compiled against. +These version numbers refer to the ABI version of the library, not the +release version. + Usually, it's a good idea to terminate if the major versions mismatch, -as this indicates an incompatible change. Minor versions are usually +as this indicates an incompatible change. Minor versions are usually compatible to older versions, so a larger minor version alone is usually not a problem. @@ -310,15 +315,18 @@ lot of inactive fds). It scales similarly to select, i.e. O(total_fds). =item C (value 4, Linux) For few fds, this backend is a bit little slower than poll and select, -but it scales phenomenally better. While poll and select usually scale like -O(total_fds) where n is the total number of fds (or the highest fd), epoll scales -either O(1) or O(active_fds). - -While stopping and starting an I/O watcher in the same iteration will -result in some caching, there is still a syscall per such incident +but it scales phenomenally better. While poll and select usually scale +like O(total_fds) where n is the total number of fds (or the highest fd), +epoll scales either O(1) or O(active_fds). The epoll design has a number +of shortcomings, such as silently dropping events in some hard-to-detect +cases and rewuiring a syscall per fd change, no fork support and bad +support for dup: + +While stopping, setting and starting an I/O watcher in the same iteration +will result in some caching, there is still a syscall per such incident (because the fd could point to a different file description now), so its -best to avoid that. Also, dup()ed file descriptors might not work very -well if you register events for both fds. +best to avoid that. Also, C'ed file descriptors might not work +very well if you register events for both fds. Please note that epoll sometimes generates spurious notifications, so you need to use non-blocking I/O or other means to avoid blocking when no data @@ -327,17 +335,20 @@ need to use non-blocking I/O or other means to avoid blocking when no data =item C (value 8, most BSD clones) Kqueue deserves special mention, as at the time of this writing, it -was broken on all BSDs except NetBSD (usually it doesn't work with -anything but sockets and pipes, except on Darwin, where of course its -completely useless). For this reason its not being "autodetected" +was broken on I BSDs (usually it doesn't work with anything but +sockets and pipes, except on Darwin, where of course it's completely +useless. On NetBSD, it seems to work for all the FD types I tested, so it +is used by default there). For this reason it's not being "autodetected" unless you explicitly specify it explicitly in the flags (i.e. using -C). +C) or libev was compiled on a known-to-be-good (-enough) +system like NetBSD. It scales in the same way as the epoll backend, but the interface to the -kernel is more efficient (which says nothing about its actual speed, of -course). While starting and stopping an I/O watcher does not cause an -extra syscall as with epoll, it still adds up to four event changes per -incident, so its best to avoid that. +kernel is more efficient (which says nothing about its actual speed, +of course). While stopping, setting and starting an I/O watcher does +never cause an extra syscall as with epoll, it still adds up to two event +changes per incident, support for C is very bad and it drops fds +silently in similarly hard-to-detetc cases. =item C (value 16, Solaris 8) @@ -345,10 +356,10 @@ This is not implemented yet (and might never be). =item C (value 32, Solaris 10) -This uses the Solaris 10 port mechanism. As with everything on Solaris, +This uses the Solaris 10 event port mechanism. As with everything on Solaris, it's really slow, but it still scales very well (O(active_fds)). -Please note that solaris ports can result in a lot of spurious +Please note that solaris event ports can deliver a lot of spurious notifications, so you need to use non-blocking I/O or other means to avoid blocking when no data (or space) is available. @@ -401,9 +412,18 @@ etc.). None of the active event watchers will be stopped in the normal sense, so e.g. C might still return true. It is your responsibility to either stop all watchers cleanly yoursef I calling this function, or cope with the fact afterwards (which is usually -the easiest thing, youc na just ignore the watchers and/or C them +the easiest thing, you can just ignore the watchers and/or C them for example). +Note that certain global state, such as signal state, will not be freed by +this function, and related watchers (such as signal and child watchers) +would need to be stopped manually. + +In general it is not advisable to call this function except in the +rare occasion where you really need to free e.g. the signal handling +pipe fds. If you need dynamically allocated loops it is better to use +C and C). + =item ev_loop_destroy (loop) Like C, but destroys an event loop created by an @@ -457,7 +477,7 @@ Returns the current "event loop time", which is the time the event loop received events and started processing them. This timestamp does not change as long as callbacks are being processed, and this is also the base time used for relative timers. You can treat it as the timestamp of the -event occuring (or more correctly, libev finding out about it). +event occurring (or more correctly, libev finding out about it). =item ev_loop (loop, int flags) @@ -910,6 +930,52 @@ whether a file descriptor is really ready with a known-to-be good interface such as poll (fortunately in our Xlib example, Xlib already does this on its own, so its quite safe to use). +=head3 The special problem of disappearing file descriptors + +Some backends (e.g. kqueue, epoll) need to be told about closing a file +descriptor (either by calling C explicitly or by any other means, +such as C). The reason is that you register interest in some file +descriptor, but when it goes away, the operating system will silently drop +this interest. If another file descriptor with the same number then is +registered with libev, there is no efficient way to see that this is, in +fact, a different file descriptor. + +To avoid having to explicitly tell libev about such cases, libev follows +the following policy: Each time C is being called, libev +will assume that this is potentially a new file descriptor, otherwise +it is assumed that the file descriptor stays the same. That means that +you I to call C (or C) when you change the +descriptor even if the file descriptor number itself did not change. + +This is how one would do it normally anyway, the important point is that +the libev application should not optimise around libev but should leave +optimisations to libev. + +=head3 The special problem of dup'ed file descriptors + +Some backends (e.g. epoll), cannot register events for file descriptors, +but only events for the underlying file descriptions. That menas when you +have C'ed file descriptors and register events for them, only one +file descriptor might actually receive events. + +There is no workaorund possible except not registering events +for potentially C'ed file descriptors or to resort to +C or C. + +=head3 The special problem of fork + +Some backends (epoll, kqueue) do not support C at all or exhibit +useless behaviour. Libev fully supports fork, but needs to be told about +it in the child. + +To support fork in your programs, you either have to call +C or C after a fork in the child, +enable C, or resort to C or +C. + + +=head3 Watcher-Specific Functions + =over 4 =item ev_io_init (ev_io *, callback, int fd, int events) @@ -972,6 +1038,8 @@ The callback is guarenteed to be invoked only when its timeout has passed, but if multiple timers become ready during the same loop iteration then order of execution is undefined. +=head3 Watcher-Specific Functions and Data Members + =over 4 =item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat) @@ -1086,6 +1154,8 @@ As with timers, the callback is guarenteed to be invoked only when the time (C) has been passed, but if multiple periodic timers become ready during the same loop iteration then order of execution is undefined. +=head3 Watcher-Specific Functions and Data Members + =over 4 =item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb) @@ -1191,6 +1261,11 @@ The current reschedule callback, or C<0>, if this functionality is switched off. Can be changed any time, but changes only take effect when the periodic timer fires or C is being called. +=item ev_tstamp at [read-only] + +When active, contains the absolute time that the watcher is supposed to +trigger next. + =back Example: Call a callback every hour, or, more precisely, whenever the @@ -1241,6 +1316,8 @@ as you don't register any with libev). Similarly, when the last signal watcher for a signal is stopped libev will reset the signal handler to SIG_DFL (regardless of what it was set to before). +=head3 Watcher-Specific Functions and Data Members + =over 4 =item ev_signal_init (ev_signal *, callback, int signum) @@ -1262,6 +1339,8 @@ The signal the watcher watches out for. Child watchers trigger when your process receives a SIGCHLD in response to some child status changes (most typically when a child of yours dies). +=head3 Watcher-Specific Functions and Data Members + =over 4 =item ev_child_init (ev_child *, callback, int pid) @@ -1339,6 +1418,8 @@ to fall back to regular polling again even with inotify, but changes are usually detected immediately, and if the file exists there will be no polling. +=head3 Watcher-Specific Functions and Data Members + =over 4 =item ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval) @@ -1430,6 +1511,8 @@ effect on its own sometimes), idle watchers are a good place to do "pseudo-background processing", or delay processing stuff to after the event loop has handled all outstanding events. +=head3 Watcher-Specific Functions and Data Members + =over 4 =item ev_idle_init (ev_signal *, callback) @@ -1506,6 +1589,8 @@ loops those other event loops might be in an unusable state until their C watcher ran (always remind yourself to coexist peacefully with others). +=head3 Watcher-Specific Functions and Data Members + =over 4 =item ev_prepare_init (ev_prepare *, callback) @@ -1651,7 +1736,7 @@ this. This is a rather advanced watcher type that lets you embed one event loop into another (currently only C events are supported in the embedded loop, other types of watchers might be handled in a delayed or incorrect -fashion and must not be used). +fashion and must not be used). (See portability notes, below). There are primarily two reasons you would want that: work around bugs and prioritise I/O. @@ -1716,6 +1801,24 @@ create it, and if that fails, use the normal loop for everything: else loop_lo = loop_hi; +=head2 Portability notes + +Kqueue is nominally embeddable, but this is broken on all BSDs that I +tried, in various ways. Usually the embedded event loop will simply never +receive events, sometimes it will only trigger a few times, sometimes in a +loop. Epoll is also nominally embeddable, but many Linux kernel versions +will always eport the epoll fd as ready, even when no events are pending. + +While libev allows embedding these backends (they are contained in +C), take extreme care that it will actually +work. + +When in doubt, create a dynamic event loop forced to use sockets (this +usually works) and possibly another thread and a pipe or so to report to +your main event loop. + +=head3 Watcher-Specific Functions and Data Members + =over 4 =item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop) @@ -1734,7 +1837,7 @@ Make a single, non-blocking sweep over the embedded loop. This works similarly to C, but in the most apropriate way for embedded loops. -=item struct ev_loop *loop [read-only] +=item struct ev_loop *other [read-only] The embedded event loop. @@ -1751,6 +1854,8 @@ and only in the child after the fork. If whoever good citizen calling C cheats and calls it in the wrong process, the fork handlers will be invoked, too, of course. +=head3 Watcher-Specific Functions and Data Members + =over 4 =item ev_fork_init (ev_signal *, callback) @@ -1976,16 +2081,16 @@ constructor already stores the event loop. Stops the watcher if it is active. Again, no C argument. -=item w->again () C, C only +=item w->again () (C, C only) For C and C, this invokes the corresponding C function. -=item w->sweep () C only +=item w->sweep () (C only) Invokes C. -=item w->update () C only +=item w->update () (C only) Invokes C. @@ -2015,9 +2120,9 @@ the constructor. =head1 MACRO MAGIC -Libev can be compiled with a variety of options, the most fundemantal is -C. This option determines whether (most) functions and -callbacks have an initial C argument. +Libev can be compiled with a variety of options, the most fundamantal +of which is C. This option determines whether (most) +functions and callbacks have an initial C argument. To make it easier to write programs that cope with either variant, the following macros are defined: @@ -2081,7 +2186,7 @@ applications. Examples of applications that embed it include the Deliantra Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe) and rxvt-unicode. -The goal is to enable you to just copy the neecssary files into your +The goal is to enable you to just copy the necessary files into your source directory without having to change even a single line in them, so you can easily upgrade by simply copying (or having a checked-out copy of libev somewhere in your source tree). @@ -2181,7 +2286,7 @@ If defined to be C<1>, libev will try to detect the availability of the monotonic clock option at both compiletime and runtime. Otherwise no use of the monotonic clock option will be attempted. If you enable this, you usually have to link against librt or something similar. Enabling it when -the functionality isn't available is safe, though, althoguh you have +the functionality isn't available is safe, though, although you have to make sure you link against any libraries where the C function is hiding in (often F<-lrt>). @@ -2191,8 +2296,8 @@ If defined to be C<1>, libev will try to detect the availability of the realtime clock option at compiletime (and assume its availability at runtime if successful). Otherwise no use of the realtime clock option will be attempted. This effectively replaces C by C and will not normally affect correctness. See tzhe note about libraries -in the description of C, though. +(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the +note about libraries in the description of C, though. =item EV_USE_SELECT @@ -2381,11 +2486,36 @@ For example, the perl EV module uses something like this: Can be used to change the callback member declaration in each watcher, and the way callbacks are invoked and set. Must expand to a struct member -definition and a statement, respectively. See the F header file for +definition and a statement, respectively. See the F header file for their default definitions. One possible use for overriding these is to avoid the C as first argument in all cases, or to use method calls instead of plain function calls in C++. +=head2 EXPORTED API SYMBOLS + +If you need to re-export the API (e.g. via a dll) and you need a list of +exported symbols, you can use the provided F files which list +all public symbols, one per line: + + Symbols.ev for libev proper + Symbols.event for the libevent emulation + +This can also be used to rename all public symbols to avoid clashes with +multiple versions of libev linked together (which is obviously bad in +itself, but sometimes it is inconvinient to avoid this). + +A sed command like this will create wrapper C<#define>'s that you need to +include before including F: + + wrap.h + +This would create a file F which essentially looks like this: + + #define ev_backend myprefix_ev_backend + #define ev_check_start myprefix_ev_check_start + #define ev_check_stop myprefix_ev_check_stop + ... + =head2 EXAMPLES For a real-world example of a program the includes libev