X-Git-Url: https://git.llucax.com/software/libev.git/blobdiff_plain/924ae10c0376cdb4b581d30f7b8a258b6b9e4853..86521c1ef67d371e724e4419f5100dc0da641194:/ev.pod?ds=inline diff --git a/ev.pod b/ev.pod index 1b797df..26d837b 100644 --- a/ev.pod +++ b/ev.pod @@ -50,8 +50,12 @@ libev - a high performance full-featured event loop written in C =head1 DESCRIPTION +The newest version of this document is also available as a html-formatted +web page you might find easier to navigate when reading it for the first +time: L. + Libev is an event loop: you register interest in certain events (such as a -file descriptor being readable or a timeout occuring), and it will manage +file descriptor being readable or a timeout occurring), and it will manage these event sources and provide your program with events. To do this, it must take more or less complete control over your process @@ -65,12 +69,13 @@ watcher. =head1 FEATURES -Libev supports C, C, the Linux-specific C, the +BSD-specific C and the Solaris-specific event port mechanisms +for file descriptor events (C), the Linux C interface +(for C), relative timers (C), absolute timers +with customised rescheduling (C), synchronous signals +(C), process status change events (C), and event +watchers dealing with the event loop mechanism itself (C, C, C and C watchers) as well as file watchers (C) and even limited support for fork events (C). @@ -95,7 +100,9 @@ Libev represents time as a single floating point number, representing the the beginning of 1970, details are complicated, don't ask). This type is called C, which is what you should use too. It usually aliases to the C type in C, and when you need to do any calculations on -it, you should treat it as such. +it, you should treat it as some floatingpoint value. Unlike the name +component C might indicate, it is also used for time differences +throughout libev. =head1 GLOBAL FUNCTIONS @@ -110,18 +117,27 @@ Returns the current time as libev would use it. Please note that the C function is usually faster and also often returns the timestamp you actually want to know. +=item ev_sleep (ev_tstamp interval) + +Sleep for the given interval: The current thread will be blocked until +either it is interrupted or the given time interval has passed. Basically +this is a subsecond-resolution C. + =item int ev_version_major () =item int ev_version_minor () -You can find out the major and minor version numbers of the library +You can find out the major and minor ABI version numbers of the library you linked against by calling the functions C and C. If you want, you can compare against the global symbols C and C, which specify the version of the library your program was compiled against. +These version numbers refer to the ABI version of the library, not the +release version. + Usually, it's a good idea to terminate if the major versions mismatch, -as this indicates an incompatible change. Minor versions are usually +as this indicates an incompatible change. Minor versions are usually compatible to older versions, so a larger minor version alone is usually not a problem. @@ -164,13 +180,14 @@ recommended ones. See the description of C watchers for more info. -=item ev_set_allocator (void *(*cb)(void *ptr, size_t size)) +=item ev_set_allocator (void *(*cb)(void *ptr, long size)) -Sets the allocation function to use (the prototype and semantics are -identical to the realloc C function). It is used to allocate and free -memory (no surprises here). If it returns zero when memory needs to be -allocated, the library might abort or take some potentially destructive -action. The default is your system realloc function. +Sets the allocation function to use (the prototype is similar - the +semantics is identical - to the realloc C function). It is used to +allocate and free memory (no surprises here). If it returns zero when +memory needs to be allocated, the library might abort or take some +potentially destructive action. The default is your system realloc +function. You could override this function in high-availability programs to, say, free some memory if it cannot allocate memory, to use a special allocator, @@ -266,6 +283,26 @@ override the flags completely if it is found in the environment. This is useful to try out specific backends to test their performance, or to work around bugs. +=item C + +Instead of calling C or C manually after +a fork, you can also make libev check for a fork in each iteration by +enabling this flag. + +This works by calling C on every iteration of the loop, +and thus this might slow down your event loop if you do a lot of loop +iterations and little real work, but is usually not noticeable (on my +Linux system for example, C is actually a simple 5-insn sequence +without a syscall and thus I fast, but my Linux system also has +C which is even faster). + +The big advantage of this flag is that you can forget about fork (and +forget about forgetting to tell libev about forking) when you use this +flag. + +This flag setting cannot be overriden or specified in the C +environment variable. + =item C (value 1, portable select backend) This is your standard select(2) backend. Not I standard, as @@ -284,15 +321,18 @@ lot of inactive fds). It scales similarly to select, i.e. O(total_fds). =item C (value 4, Linux) For few fds, this backend is a bit little slower than poll and select, -but it scales phenomenally better. While poll and select usually scale like -O(total_fds) where n is the total number of fds (or the highest fd), epoll scales -either O(1) or O(active_fds). - -While stopping and starting an I/O watcher in the same iteration will -result in some caching, there is still a syscall per such incident +but it scales phenomenally better. While poll and select usually scale +like O(total_fds) where n is the total number of fds (or the highest fd), +epoll scales either O(1) or O(active_fds). The epoll design has a number +of shortcomings, such as silently dropping events in some hard-to-detect +cases and rewiring a syscall per fd change, no fork support and bad +support for dup: + +While stopping, setting and starting an I/O watcher in the same iteration +will result in some caching, there is still a syscall per such incident (because the fd could point to a different file description now), so its -best to avoid that. Also, dup()ed file descriptors might not work very -well if you register events for both fds. +best to avoid that. Also, C'ed file descriptors might not work +very well if you register events for both fds. Please note that epoll sometimes generates spurious notifications, so you need to use non-blocking I/O or other means to avoid blocking when no data @@ -301,17 +341,20 @@ need to use non-blocking I/O or other means to avoid blocking when no data =item C (value 8, most BSD clones) Kqueue deserves special mention, as at the time of this writing, it -was broken on all BSDs except NetBSD (usually it doesn't work with -anything but sockets and pipes, except on Darwin, where of course its -completely useless). For this reason its not being "autodetected" +was broken on I BSDs (usually it doesn't work with anything but +sockets and pipes, except on Darwin, where of course it's completely +useless. On NetBSD, it seems to work for all the FD types I tested, so it +is used by default there). For this reason it's not being "autodetected" unless you explicitly specify it explicitly in the flags (i.e. using -C). +C) or libev was compiled on a known-to-be-good (-enough) +system like NetBSD. It scales in the same way as the epoll backend, but the interface to the -kernel is more efficient (which says nothing about its actual speed, of -course). While starting and stopping an I/O watcher does not cause an -extra syscall as with epoll, it still adds up to four event changes per -incident, so its best to avoid that. +kernel is more efficient (which says nothing about its actual speed, +of course). While stopping, setting and starting an I/O watcher does +never cause an extra syscall as with epoll, it still adds up to two event +changes per incident, support for C is very bad and it drops fds +silently in similarly hard-to-detetc cases. =item C (value 16, Solaris 8) @@ -319,10 +362,10 @@ This is not implemented yet (and might never be). =item C (value 32, Solaris 10) -This uses the Solaris 10 port mechanism. As with everything on Solaris, +This uses the Solaris 10 event port mechanism. As with everything on Solaris, it's really slow, but it still scales very well (O(active_fds)). -Please note that solaris ports can result in a lot of spurious +Please note that solaris event ports can deliver a lot of spurious notifications, so you need to use non-blocking I/O or other means to avoid blocking when no data (or space) is available. @@ -375,9 +418,18 @@ etc.). None of the active event watchers will be stopped in the normal sense, so e.g. C might still return true. It is your responsibility to either stop all watchers cleanly yoursef I calling this function, or cope with the fact afterwards (which is usually -the easiest thing, youc na just ignore the watchers and/or C them +the easiest thing, you can just ignore the watchers and/or C them for example). +Note that certain global state, such as signal state, will not be freed by +this function, and related watchers (such as signal and child watchers) +would need to be stopped manually. + +In general it is not advisable to call this function except in the +rare occasion where you really need to free e.g. the signal handling +pipe fds. If you need dynamically allocated loops it is better to use +C and C). + =item ev_loop_destroy (loop) Like C, but destroys an event loop created by an @@ -410,6 +462,16 @@ Like C, but acts on an event loop created by C. Yes, you have to call this on every allocated event loop after fork, and how you do this is entirely your own problem. +=item unsigned int ev_loop_count (loop) + +Returns the count of loop iterations for the loop, which is identical to +the number of times libev did poll for new events. It starts at C<0> and +happily wraps around with enough iterations. + +This value can sometimes be useful as a generation counter of sorts (it +"ticks" the number of loop iterations), as it roughly corresponds with +C and C calls. + =item unsigned int ev_backend (loop) Returns one of the C flags indicating the event backend in @@ -421,7 +483,7 @@ Returns the current "event loop time", which is the time the event loop received events and started processing them. This timestamp does not change as long as callbacks are being processed, and this is also the base time used for relative timers. You can treat it as the timestamp of the -event occuring (or more correctly, libev finding out about it). +event occurring (or more correctly, libev finding out about it). =item ev_loop (loop, int flags) @@ -452,8 +514,9 @@ usually a better approach for this kind of thing. Here are the gory details of what C does: + - Before the first iteration, call any pending watchers. * If there are no active watchers (reference count is zero), return. - - Queue prepare watchers and then call all outstanding watchers. + - Queue all prepare watchers and then call all outstanding watchers. - If we have been forked, recreate the kernel state. - Update the kernel state with all outstanding changes. - Update the "event loop time". @@ -514,6 +577,40 @@ Example: For some weird reason, unregister the above signal handler again. ev_ref (loop); ev_signal_stop (loop, &exitsig); +=item ev_set_io_collect_interval (loop, ev_tstamp interval) + +=item ev_set_timeout_collect_interval (loop, ev_tstamp interval) + +These advanced functions influence the time that libev will spend waiting +for events. Both are by default C<0>, meaning that libev will try to +invoke timer/periodic callbacks and I/O callbacks with minimum latency. + +Setting these to a higher value (the C I be >= C<0>) +allows libev to delay invocation of I/O and timer/periodic callbacks to +increase efficiency of loop iterations. + +The background is that sometimes your program runs just fast enough to +handle one (or very few) event(s) per loop iteration. While this makes +the program responsive, it also wastes a lot of CPU time to poll for new +events, especially with backends like C. =item EV_USE_SELECT @@ -1987,6 +2407,12 @@ backend for Solaris 10 systems. reserved for future expansion, works like the USE symbols above. +=item EV_USE_INOTIFY + +If defined to be C<1>, libev will compile in support for the Linux inotify +interface to speed up C watchers. Its actual availability will +be detected at runtime. + =item EV_H The name of the F header file used to include it. The default if @@ -2019,12 +2445,35 @@ additional independent event loops. Otherwise there will be no support for multiple event loops and there is no first event loop pointer argument. Instead, all functions act on the single default loop. +=item EV_MINPRI + +=item EV_MAXPRI + +The range of allowed priorities. C must be smaller or equal to +C, but otherwise there are no non-obvious limitations. You can +provide for more priorities by overriding those symbols (usually defined +to be C<-2> and C<2>, respectively). + +When doing priority-based operations, libev usually has to linearly search +all the priorities, so having many of them (hundreds) uses a lot of space +and time, so using the defaults of five priorities (-2 .. +2) is usually +fine. + +If your embedding app does not need any priorities, defining these both to +C<0> will save some memory and cpu. + =item EV_PERIODIC_ENABLE If undefined or defined to be C<1>, then periodic timers are supported. If defined to be C<0>, then they are not. Disabling them saves a few kB of code. +=item EV_IDLE_ENABLE + +If undefined or defined to be C<1>, then idle watchers are supported. If +defined to be C<0>, then they are not. Disabling them saves a few kB of +code. + =item EV_EMBED_ENABLE If undefined or defined to be C<1>, then embed watchers are supported. If @@ -2051,7 +2500,15 @@ some inlining decisions, saves roughly 30% codesize of amd64. C watchers use a small hash table to distribute workload by pid. The default size is C<16> (or C<1> with C), usually more than enough. If you need to manage thousands of children you might want to -increase this value. +increase this value (I be a power of two). + +=item EV_INOTIFY_HASHSIZE + +C watchers use a small hash table to distribute workload by +inotify watch id. The default size is C<16> (or C<1> with C), +usually more than enough. If you need to manage thousands of C +watchers you might want to increase this value (I be a power of +two). =item EV_COMMON @@ -2074,11 +2531,36 @@ For example, the perl EV module uses something like this: Can be used to change the callback member declaration in each watcher, and the way callbacks are invoked and set. Must expand to a struct member -definition and a statement, respectively. See the F header file for +definition and a statement, respectively. See the F header file for their default definitions. One possible use for overriding these is to avoid the C as first argument in all cases, or to use method calls instead of plain function calls in C++. +=head2 EXPORTED API SYMBOLS + +If you need to re-export the API (e.g. via a dll) and you need a list of +exported symbols, you can use the provided F files which list +all public symbols, one per line: + + Symbols.ev for libev proper + Symbols.event for the libevent emulation + +This can also be used to rename all public symbols to avoid clashes with +multiple versions of libev linked together (which is obviously bad in +itself, but sometimes it is inconvinient to avoid this). + +A sed command like this will create wrapper C<#define>'s that you need to +include before including F: + + wrap.h + +This would create a file F which essentially looks like this: + + #define ev_backend myprefix_ev_backend + #define ev_check_start myprefix_ev_check_start + #define ev_check_stop myprefix_ev_check_stop + ... + =head2 EXAMPLES For a real-world example of a program the includes libev @@ -2090,12 +2572,17 @@ will be compiled. It is pretty complex because it provides its own header file. The usage in rxvt-unicode is simpler. It has a F header file -that everybody includes and which overrides some autoconf choices: +that everybody includes and which overrides some configure choices: + #define EV_MINIMAL 1 #define EV_USE_POLL 0 #define EV_MULTIPLICITY 0 - #define EV_PERIODICS 0 + #define EV_PERIODIC_ENABLE 0 + #define EV_STAT_ENABLE 0 + #define EV_FORK_ENABLE 0 #define EV_CONFIG_H + #define EV_MINPRI 0 + #define EV_MAXPRI 0 #include "ev++.h" @@ -2111,24 +2598,51 @@ In this section the complexities of (many of) the algorithms used inside libev will be explained. For complexity discussions about backends see the documentation for C. +All of the following are about amortised time: If an array needs to be +extended, libev needs to realloc and move the whole array, but this +happens asymptotically never with higher number of elements, so O(1) might +mean it might do a lengthy realloc operation in rare cases, but on average +it is much faster and asymptotically approaches constant time. + =over 4 =item Starting and stopping timer/periodic watchers: O(log skipped_other_timers) +This means that, when you have a watcher that triggers in one hour and +there are 100 watchers that would trigger before that then inserting will +have to skip those 100 watchers. + =item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers) +That means that for changing a timer costs less than removing/adding them +as only the relative motion in the event queue has to be paid for. + =item Starting io/check/prepare/idle/signal/child watchers: O(1) +These just add the watcher into an array or at the head of a list. =item Stopping check/prepare/idle watchers: O(1) -=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % 16)) +=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE)) + +These watchers are stored in lists then need to be walked to find the +correct watcher to remove. The lists are usually short (you don't usually +have many watchers waiting for the same fd or signal). =item Finding the next timer per loop iteration: O(1) =item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd) +A change means an I/O watcher gets started or stopped, which requires +libev to recalculate its status (and possibly tell the kernel). + =item Activating one watcher: O(1) +=item Priority handling: O(number_of_priorities) + +Priorities are implemented by allocating some space for each +priority. When doing priority-based operations, libev usually has to +linearly search all the priorities. + =back