X-Git-Url: https://git.llucax.com/software/makeit.git/blobdiff_plain/607a5570f89fa881bc045b08a43cfb347a466190..15551bd077a4b0faaf64ede1634251695f38e0be:/Lib.mak diff --git a/Lib.mak b/Lib.mak index 2be60c5..f948eca 100644 --- a/Lib.mak +++ b/Lib.mak @@ -1,18 +1,18 @@ - ifndef Lib.mak.included Lib.mak.included := 1 -# These variables should be provided by the includer Makefile: +# These variables should be provided by the Makefile that include us: # P should be the project name, mostly used to handle include directories # T should be the path to the top-level directory. -# C should be the path to the current directory. - -# Load top-level directory local configuration -sinclude $T/Config.mak +# S should be sub-directory where the current makefile is, relative to $T. -# Verbosity flag (empty show nice messages, 1 be verbose) +# Verbosity flag (empty show nice messages, non-empty use make messages) +# When used internal, $V expand to @ is nice messages should be printed, this +# way it's easy to add $V in front of commands that should be silenced when +# displaying the nice messages. +override V := $(if $V,,@) # honour make -s flag -override V := $(if $(findstring s,$(MAKEFLAGS)),1,$V) +override V := $(if $(findstring s,$(MAKEFLAGS)),,$V) # Flavor (variant), should be one of "dbg", "opt" or "cov" F ?= opt @@ -20,13 +20,26 @@ F ?= opt # Use C++ linker by default LINKER := $(CXX) -# Use precompiled headers if non-empty +# Default mode used to install files +IMODE ?= 0644 + +# Default install flags +IFLAGS ?= -D + +# Use pre-compiled headers if non-empty GCH ?= # Directories ############## +# Base directory where to install files (can be overridden, should be absolute) +prefix ?= /usr/local + +# Path to a complete alternative environment, usually a jail, or an installed +# system mounted elsewhere than /. +DESTDIR ?= + # Use absolute paths to avoid problems with automatic dependencies when # building from subdirectories T := $(abspath $T) @@ -34,13 +47,13 @@ T := $(abspath $T) # Name of the current directory, relative to $T R := $(subst $T,,$(patsubst $T/%,%,$(CURDIR))) -# Base directory where to put variants -D ?= $T/build +# Base directory where to put variants (Variants Directory) +VD ?= $T/build # Generated files top directory -G ?= $D/$F +G ?= $(VD)/$F -# Objects (and other garbage like precompiled headers and dependency files) +# Objects (and other garbage like pre-compiled headers and dependency files) # directory O ?= $G/obj @@ -50,39 +63,67 @@ B ?= $G/bin # Libraries directory L ?= $G/lib +# Documentation directory +D ?= $(VD)/doc + +# Installation directory +I := $(DESTDIR)$(prefix) + # Includes directory -I ?= $G/include +INCLUDE_DIR ?= $G/include -# Generated includes directory -J ?= $G/geninc +# Directory of the current makefile (this might not be the same as $(CURDIR) +# This variable is "lazy" because $S changes all the time, so it should be +# evaluated in the context where $C is used, not here. +C = $T/$S # Functions ############ -# Find sources files and get the corresponding object names -# The first argument should be the sources extension ("c" or "cpp" typically) -# It expects the variable $T and $O to be defined as commented previously in -# this file. $C should be defined to the path to the current directory relative -# to the top-level. -find_objects = $(patsubst $T/%.$1,$O/%.o,$(shell find $T/$C -name '*.$1')) +# Compare two strings, if they are the same, returns the string, if not, +# returns empty. +eq = $(if $(subst $1,,$2),,$1) + +# Find sources files and get the corresponding object names. The first +# argument should be the sources extension ("c" or "cpp" typically). The +# second argument is where to search for the sources ($C if omitted). The +# resulting files will always have the suffix "o" and the directory rewritten +# to match the directory structure (from $T) but in the $O directory. For +# example, if $T is "/usr/src", $O is "/tmp/obj", $C is "/usr/src/curr" and it +# have 2 C sources: "/usr/src/curr/1.c" and "/usr/src/curr/dir/2.c", the call: +# $(call find_objects,c) +# Will yield "/tmp/obj/curr/1.o" and "/tmp/obj/curr/dir/2.o". +find_objects = $(patsubst $T/%.$1,$O/%.o,$(shell \ + find $(if $2,$2,$C) -name '*.$1')) + +# Find files and get the their file names relative to another directory. The +# first argument should be the files suffix (".h" or ".cpp" for example). The +# second argument is a directory rewrite, the matched files will be rewriten to +# be in the directory specified in this argument (it defaults to the third +# argument if omitted). The third argument is where to search for the files +# ($C if omitted). +find_files = $(patsubst $(if $3,$3,$C)/%$1,$(if $2,$2,$(if $3,$3,$C))/%$1, \ + $(shell find $(if $3,$3,$C) -name '*$1')) # Abbreviate a file name. Cut the leading part of a file if it match to the $T # directory, so it can be displayed as if it were a relative directory. Take # just one argument, the file name. -abbr = $(addprefix $(shell echo $R | sed 's|/\?\([^/]\+\)/\?|../|g'),\ - $(subst $T,.,$(patsubst $T/%,%,$1))) +abbr_helper = $(subst $T,.,$(patsubst $T/%,%,$1)) +abbr = $(if $(call eq,$(call abbr_helper,$1),$1),$1,$(addprefix \ + $(shell echo $R | sed 's|/\?\([^/]\+\)/\?|../|g'),\ + $(call abbr_helper,$1))) -# Execute a command printing a nice message if $V is empty +# Execute a command printing a nice message if $V is @. # The first argument is mandatory and it's the command to execute. The second # and third arguments are optional and are the target name and command name to # pretty print. -vexec = $(if $V,,\ - echo ' $(notdir $(if $3,$(strip $3),$(firstword $1))) \ +vexec = $(if $V,\ + echo ' $(call abbr,$(if $3,$(strip $3),$(firstword $1))) \ $(call abbr,$(if $2,$(strip $2),$@))' ; )$1 -# Same as vexec but it silence the echo command (prepending a @). -exec = $(if $V,,@)$(call vexec,$1,$2,$3) +# Same as vexec but it silence the echo command (prepending a @ if $V). +exec = $V$(call vexec,$1,$2,$3) # Compile a source file to an object, generating pre-compiled headers and # dependencies. The pre-compiled headers are generated only if the system @@ -92,20 +133,20 @@ exec = $(if $V,,@)$(call vexec,$1,$2,$3) # variables from a rule. define compile $(if $(GCH),\ -@if test -f $O/$*.d; then \ +$Vif test -f $O/$*.d; then \ tmp=`mktemp`; \ h=`awk -F: '!$$0 {f = 1} $$0 && f {print $$1}' $O/$*.d`; \ - grep -h '^#include <' $(call abbr,$<) $$h | sort -u > "$$tmp"; \ - if diff -q -w "$(call abbr,$O/$*.$1.h)" "$$tmp" > /dev/null 2>&1; \ + grep -h '^#include <' $< $$h | sort -u > "$$tmp"; \ + if diff -q -w "$O/$*.$1.h" "$$tmp" > /dev/null 2>&1; \ then \ rm "$$tmp"; \ else \ - mv "$$tmp" "$(call abbr,$O/$*.$1.h)"; \ + mv "$$tmp" "$O/$*.$1.h"; \ $(call vexec,$(COMPILE.$1) -o "$O/$*.$1.h.gch" "$O/$*.$1.h",\ $O/$*.$1.h.gch); \ fi \ else \ - touch "$(call abbr,$O/$*.$1.h)"; \ + touch "$O/$*.$1.h"; \ fi \ ) $(call exec,$(COMPILE.$1) -o $@ -MMD -MP $(if $(GCH),-include $O/$*.$1.h) $<) @@ -114,7 +155,7 @@ endef # Link object files to build an executable. The objects files are taken from # the prerequisite files ($O/%.o). If in the prerequisite files are shared # objects ($L/lib%.so), they are included as libraries to link to (-l%). This -# function is designed to be used as a command in a rule. The ouput name is +# function is designed to be used as a command in a rule. The output name is # taken from the rule automatic variables. If an argument is provided, it's # included in the link command line. The variable LINKER is used to link the # executable; for example, if you want to link a C++ executable, you should use @@ -123,17 +164,79 @@ link = $(call exec,$(LINKER) $(LDFLAGS) $(TARGET_ARCH) -o $@ $1 \ $(patsubst $L/lib%.so,-l%,$(filter %.so,$^)) \ $(foreach obj,$(filter %.o,$^),$(obj))) +# Install a file. All arguments are optional. The first argument is the file +# mode (defaults to 0644). The second argument are extra flags to the install +# command (defaults to -D). The third argument is the source file to install +# (defaults to $<) and the last one is the destination (defaults to $@). +install_file = $(call exec,install -m $(if $1,$1,0644) $(if $2,$2,-D) \ + $(if $3,$3,$<) $(if $4,$4,$@)) + +# Concatenate variables together. The first argument is a list of variables +# names to concatenate. The second argument is an optional prefix for the +# variables and the third is the string to use as separator (" ~" if omitted). +# For example: +# X_A := a +# X_B := b +# $(call varcat,A B,X_, --) +# Will produce something like "a -- b --" +varcat = $(foreach v,$1,$($2$v)$(if $3,$3, ~)) + +# Replace variables with specified values in a template file. The first +# argument is a list of make variables names which will be replaced in the +# target file. The strings @VARNAME@ in the template file will be replaced +# with the value of the make $(VARNAME) variable and the result will be stored +# in the target file. The second (optional) argument is a prefix to add to the +# make variables names, so if the prefix is PREFIX_ and @VARNAME@ is found in +# the template file, it will be replaced by the value of the make variable +# $(PREFIX_VARNAME). The third and fourth arguments are the source file and +# the destination file (both optional, $< and $@ are used if omitted). The +# fifth (optional) argument are options to pass to the substitute sed command +# (for example, use "g" if you want to do multiple substitutions per line). +replace = $(call exec,sed '$(foreach v,$1,s|@$v@|$($2$v)|$5;)' $(if $3,$3,$<) \ + > $(if $4,$4,$@)) + +# Create a symbolic link to the project under the $(INCLUDE_DIR). The first +# argument is the name of symbolic link to create. The link is only created if +# it doesn't already exist. +symlink_include_dir = $(shell \ + test -L $(INCLUDE_DIR)/$1 \ + || ln -s $C $(INCLUDE_DIR)/$1 ) + +# Create a file with flags used to trigger rebuilding when they change. The +# first argument is the name of the file where to store the flags, the second +# are the flags and the third argument is a text to be displayed if the flags +# have changed (optional). This should be used as a rule action or something +# where a shell script is expected. +gen_rebuild_flags = $(shell if test x"$2" != x"`cat $1 2>/dev/null`"; then \ + $(if $3,test -f $1 && echo "$3";) \ + echo "$2" > $1 ; fi) + +# Include sub-directory's Build.mak. The only argument is a list of +# subdirectories for which Build.mak should be included. The $S directory is +# set properly before including each sub-directory's Build.mak and restored +# afterwards. +define build_subdir_code +_parent__$d__dir_ := $$S +S := $$(if $$(_parent__$d__dir_),$$(_parent__$d__dir_)/$d,$d) +include $$T/$$S/Build.mak +S := $$(_parent__$d__dir_) +endef +include_subdirs = $(foreach d,$1,$(eval $(build_subdir_code))) + -# Overrided flags +# Overridden flags ################## # Warn about everything override CPPFLAGS += -Wall # Use the includes directories to search for includes -override CPPFLAGS += -I$I -I$J +override CPPFLAGS += -I$(INCLUDE_DIR) + +# Let the program know where it will be installed +override CPPFLAGS += -DPREFIX=$(prefix) -# Be standard compilant +# Be standard compliant override CFLAGS += -std=c99 -pedantic override CXXFLAGS += -std=c++98 -pedantic @@ -161,91 +264,146 @@ override LDFLAGS += -pg --coverage endif -# Automatic rebuilding when flags or commands changes -###################################################### - -# Re-compile C files if one of this variables changes -COMPILE.c.FLAGS := $(CC) ~ $(CPPFLAGS) ~ $(CFLAGS) ~ $(TARGET_ARCH) - -# Re-compile C++ files if one of this variables changes -COMPILE.cpp.FLAGS := $(CXX) ~ $(CPPFLAGS) ~ $(CXXFLAGS) ~ $(TARGET_ARCH) +# Automatic dependency handling +################################ -# Re-link binaries and libraries if one of this variables changes -LINK.o.FLAGS := $(LD) ~ $(LDFLAGS) ~ $(TARGET_ARCH) +# These files are created during compilation. +sinclude $(shell test -d $O && find $O -name '*.d') # Default rules ################ +# Compile C objects $O/%.o: $T/%.c $G/compile-c-flags $(call compile,c) +# Compile C++ objects $O/%.o: $T/%.cpp $G/compile-cpp-flags $(call compile,cpp) +# Link binary programs $B/%: $G/link-o-flags $(call link) +# Link shared libraries $L/%.so: override CFLAGS += -fPIC $L/%.so: override CXXFLAGS += -fPIC $L/%.so: $G/link-o-flags $(call link,-shared) +# Create pkg-config files using a template +$L/%.pc: + $(call replace,$(PC_VARS),$*-PC-) + +# Run doxygen to build the documentation. It expects the first prerequisite to +# be the Doxyfile to use and the next prerequisites the input files. This rule +# is a little restrictive, but you can always make your own if it doesn't fit +# your needs ;) +$D/%/doxygen-stamp: + $V mkdir -p $(@D) + $(call exec,(cat $<; \ + echo "FULL_PATH_NAMES=YES"; \ + echo "INPUT=$(patsubst $(/dev/null`"; then \ - test -f $1 && echo "$3"; \ - echo "$2" > $1 ; fi - -# Create $O, $B, $L, $I and $J directories and replicate the directory -# structure of the project into $O. Create one symlink "last" to the current -# build directory and another to use as include directory. It update the flags -# files to detect flag and/or compiler changes to force a rebuild. +# Create $O, $B, $L, $D and $(INCLUDE_DIR) directories and replicate the +# directory structure of the project into $O. Create one symbolic link "last" +# to the current build directory. # # NOTE: the second mkdir can yield no arguments if the project don't have any # subdirectories, that's why the current directory "." is included, so it # won't show an error message in case of no subdirectories. setup_build_dir__ := $(shell \ - mkdir -p $O $B $L $I $J; \ + mkdir -p $O $B $L $D $(INCLUDE_DIR); \ mkdir -p . $(addprefix $O,$(patsubst $T%,%,\ - $(shell find $T -type d -not -path '$D*'))); \ - $(call gen_rebuild_flags,$G/compile-c-flags, \ - $(COMPILE.c.FLAGS),C compiler or flags;); \ - $(call gen_rebuild_flags,$G/compile-cpp-flags, \ - $(COMPILE.cpp.FLAGS),C++ compiler or flags;); \ - $(call gen_rebuild_flags,$G/link-o-flags, \ - $(LINK.o.FLAGS),linker or link flags;); \ - test -L $I/$P || ln -s $T $I/$P; \ - test -L $D/last || ln -s $F $D/last ) + $(shell find $T -type d -not -path '$(VD)*'))); \ + test -L $(VD)/last || ln -s $F $(VD)/last ) -# Print any generated message (if verbose) -$(if $V,,$(if $(setup_build_dir__), \ - $(info !! Something changed: $(setup_build_dir__) \ - re-building affected files...))) -# Include the Build.mak for this directory -include $T/Build.mak +# Automatic rebuilding when flags or commands changes +###################################################### -# Phony rule to make all the targets (sub-makefiles can append targets to build -# to the $(all) variable). -.PHONY: all -all: $(all) +# Re-compile C files if one of this variables changes +COMPILE.c.FLAGS := $(call varcat,CC CPPFLAGS CFLAGS TARGET_ARCH prefix) + +# Re-compile C++ files if one of this variables changes +COMPILE.cpp.FLAGS := $(call varcat,CXX CPPFLAGS CXXFLAGS TARGET_ARCH prefix) + +# Re-link binaries and libraries if one of this variables changes +LINK.o.FLAGS := $(call varcat,LD LDFLAGS TARGET_ARCH) + +# Create files containing the current flags to trigger a rebuild if they change +setup_flag_files__ := $(call gen_rebuild_flags,$G/compile-c-flags, \ + $(COMPILE.c.FLAGS),C compiler or flags; ) +setup_flag_files__ := $(setup_flag_files__)$(call gen_rebuild_flags, \ + $G/compile-cpp-flags, $(COMPILE.cpp.FLAGS),C++ compiler or flags; ) +setup_flag_files__ := $(setup_flag_files__)$(call gen_rebuild_flags, \ + $G/link-o-flags, $(LINK.o.FLAGS),linker or link flags; ) + +# Print any generated message (if verbose) +$(if $V,$(if $(setup_flag_files__), \ + $(info !! Something changed: $(setup_flag_files__)re-building \ + affected files...))) endif