#
#
# This variable is a colon-separated list of character encoding
-# schemes for text file attachments.
+# schemes for text file attachments. Mutt uses this setting to guess
+# which encoding files being attached are encoded in to convert them to
+# a proper character set given in $send_charset.
+#
# If unset, the value of $charset will be used instead.
# For example, the following configuration would work for Japanese
# text handling:
# the section on $index_format.
#
#
+# set auto_tag=no
+#
+# Name: auto_tag
+# Type: boolean
+# Default: no
+#
+#
+# When set, functions in the index menu which affect a message
+# will be applied to all tagged messages (if there are any). When
+# unset, you must first use the <tag-prefix> function (bound to ``;''
+# by default) to make the next function apply to all tagged messages.
+#
+#
# set autoedit=no
#
# Name: autoedit
# message. The send-menu may still be accessed once you have finished
# editing the body of your message.
#
-# Also see $fast_reply.
-#
+# Note: when this option is set, you cannot use send-hooks that depend
+# on the recipients when composing a new (non-reply) message, as the initial
+# list of recipients is empty.
#
-# set auto_tag=no
-#
-# Name: auto_tag
-# Type: boolean
-# Default: no
-#
-#
-# When set, functions in the index menu which affect a message
-# will be applied to all tagged messages (if there are any). When
-# unset, you must first use the <tag-prefix> function (bound to ``;''
-# by default) to make the next function apply to all tagged messages.
+# Also see $fast_reply.
#
#
# set beep=yes
# visual terminals don't permit making the cursor invisible.
#
#
-# set check_mbox_size=no
+# set certificate_file="~/.mutt_certificates"
#
-# Name: check_mbox_size
-# Type: boolean
-# Default: no
+# Name: certificate_file
+# Type: path
+# Default: "~/.mutt_certificates"
#
#
-# When this variable is set, mutt will use file size attribute instead of
-# access time when checking for new mail in mbox and mmdf folders.
+# This variable specifies the file where the certificates you trust
+# are saved. When an unknown certificate is encountered, you are asked
+# if you accept it or not. If you accept it, the certificate can also
+# be saved in this file and further connections are automatically
+# accepted.
#
-# This variable is unset by default and should only be enabled when
-# new mail detection for these folder types is unreliable or doesn't work.
+# You can also manually add CA certificates in this file. Any server
+# certificate that is signed with one of these CA certificates is
+# also automatically accepted.
#
-# Note that enabling this variable should happen before any ``mailboxes''
-# directives occur in configuration files regarding mbox or mmdf folders
-# because mutt needs to determine the initial new mail status of such a
-# mailbox by performing a fast mailbox scan when it is defined.
-# Afterwards the new mail status is tracked by file size changes.
+# Example:
+# set certificate_file=~/.mutt/certificates
#
#
# set charset=""
# character set used correctly.
#
#
+# set check_mbox_size=no
+#
+# Name: check_mbox_size
+# Type: boolean
+# Default: no
+#
+#
+# When this variable is set, mutt will use file size attribute instead of
+# access time when checking for new mail in mbox and mmdf folders.
+#
+# This variable is unset by default and should only be enabled when
+# new mail detection for these folder types is unreliable or doesn't work.
+#
+# Note that enabling this variable should happen before any ``mailboxes''
+# directives occur in configuration files regarding mbox or mmdf folders
+# because mutt needs to determine the initial new mail status of such a
+# mailbox by performing a fast mailbox scan when it is defined.
+# Afterwards the new mail status is tracked by file size changes.
+#
+#
# set check_new=yes
#
# Name: check_new
# unread messages.
#
#
-# set uncollapse_jump=no
-#
-# Name: uncollapse_jump
-# Type: boolean
-# Default: no
-#
-#
-# When set, Mutt will jump to the next unread message, if any,
-# when the current thread is uncollapsed.
-#
-#
# set compose_format="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
#
# Name: compose_format
# $save_name, $force_name and ``fcc-hook''.
#
#
-# set crypt_use_gpgme=no
-#
-# Name: crypt_use_gpgme
-# Type: boolean
-# Default: no
-#
-#
-# This variable controls the use of the GPGME-enabled crypto backends.
-# If it is set and Mutt was built with gpgme support, the gpgme code for
-# S/MIME and PGP will be used instead of the classic code. Note that
-# you need to set this option in .muttrc; it won't have any effect when
-# used interactively.
-#
-#
-# set crypt_use_pka=no
+# set crypt_autoencrypt=no
#
-# Name: crypt_use_pka
+# Name: crypt_autoencrypt
# Type: boolean
# Default: no
#
#
-# Controls whether mutt uses PKA
-# (see http://www.g10code.de/docs/pka-intro.de.pdf) during signature
-# verification (only supported by the GPGME backend).
+# Setting this variable will cause Mutt to always attempt to PGP
+# encrypt outgoing messages. This is probably only useful in
+# connection to the ``send-hook'' command. It can be overridden
+# by use of the pgp menu, when encryption is not required or
+# signing is requested as well. If $smime_is_default is set,
+# then OpenSSL is used instead to create S/MIME messages and
+# settings can be overridden by use of the smime menu instead.
+# (Crypto only)
#
#
# set crypt_autopgp=yes
# $crypt_autosign, $crypt_replysign and $smime_is_default.
#
#
+# set crypt_autosign=no
+#
+# Name: crypt_autosign
+# Type: boolean
+# Default: no
+#
+#
+# Setting this variable will cause Mutt to always attempt to
+# cryptographically sign outgoing messages. This can be overridden
+# by use of the pgp menu, when signing is not required or
+# encryption is requested as well. If $smime_is_default is set,
+# then OpenSSL is used instead to create S/MIME messages and settings can
+# be overridden by use of the smime menu instead of the pgp menu.
+# (Crypto only)
+#
+#
# set crypt_autosmime=yes
#
# Name: crypt_autosmime
# $crypt_autosign, $crypt_replysign and $smime_is_default.
#
#
+# set crypt_replyencrypt=yes
+#
+# Name: crypt_replyencrypt
+# Type: boolean
+# Default: yes
+#
+#
+# If set, automatically PGP or OpenSSL encrypt replies to messages which are
+# encrypted.
+# (Crypto only)
+#
+#
+# set crypt_replysign=no
+#
+# Name: crypt_replysign
+# Type: boolean
+# Default: no
+#
+#
+# If set, automatically PGP or OpenSSL sign replies to messages which are
+# signed.
+#
+# Note: this does not work on messages that are encrypted
+# and signed!
+# (Crypto only)
+#
+#
+# set crypt_replysignencrypted=no
+#
+# Name: crypt_replysignencrypted
+# Type: boolean
+# Default: no
+#
+#
+# If set, automatically PGP or OpenSSL sign replies to messages
+# which are encrypted. This makes sense in combination with
+# $crypt_replyencrypt, because it allows you to sign all
+# messages which are automatically encrypted. This works around
+# the problem noted in $crypt_replysign, that mutt is not able
+# to find out whether an encrypted message is also signed.
+# (Crypto only)
+#
+#
+# set crypt_timestamp=yes
+#
+# Name: crypt_timestamp
+# Type: boolean
+# Default: yes
+#
+#
+# If set, mutt will include a time stamp in the lines surrounding
+# PGP or S/MIME output, so spoofing such lines is more difficult.
+# If you are using colors to mark these lines, and rely on these,
+# you may unset this setting.
+# (Crypto only)
+#
+#
+# set crypt_use_gpgme=no
+#
+# Name: crypt_use_gpgme
+# Type: boolean
+# Default: no
+#
+#
+# This variable controls the use of the GPGME-enabled crypto backends.
+# If it is set and Mutt was built with gpgme support, the gpgme code for
+# S/MIME and PGP will be used instead of the classic code. Note that
+# you need to set this option in .muttrc; it won't have any effect when
+# used interactively.
+#
+#
+# set crypt_use_pka=no
+#
+# Name: crypt_use_pka
+# Type: boolean
+# Default: no
+#
+#
+# Controls whether mutt uses PKA
+# (see http://www.g10code.de/docs/pka-intro.de.pdf) during signature
+# verification (only supported by the GPGME backend).
+#
+#
+# set crypt_verify_sig=yes
+#
+# Name: crypt_verify_sig
+# Type: quadoption
+# Default: yes
+#
+#
+# If ``yes'', always attempt to verify PGP or S/MIME signatures.
+# If ``ask-*'', ask whether or not to verify the signature.
+# If \Fi``no'', never attempt to verify cryptographic signatures.
+# (Crypto only)
+#
+#
# set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z"
#
# Name: date_format
# misinterpreting the line as a mbox message separator).
#
#
+# set entropy_file=""
+#
+# Name: entropy_file
+# Type: path
+# Default: ""
+#
+#
+# The file which includes random data that is used to initialize SSL
+# library functions.
+#
+#
# set envelope_from_address=""
#
# Name: envelope_from_address
# set fcc_attach=yes
#
# Name: fcc_attach
-# Type: boolean
+# Type: quadoption
# Default: yes
#
#
# its own set of printf(3)-like sequences:
# %C current file number
# %d date/time folder was last modified
-# %f filename
+# %f filename (``/'' is appended to directory names,
+# ``@'' to symbolic links and ``*'' to executable
+# files)
# %F file permissions
# %g group name (or numeric gid, if missing)
# %l number of hard links
# otherwise $mime_forward_decode is used instead.
#
#
+# set forward_decrypt=yes
+#
+# Name: forward_decrypt
+# Type: boolean
+# Default: yes
+#
+#
+# Controls the handling of encrypted messages when forwarding a message.
+# When set, the outer layer of encryption is stripped off. This
+# variable is only used if $mime_forward is set and
+# $mime_forward_decode is unset.
+# (PGP only)
+#
+#
# set forward_edit=yes
#
# Name: forward_edit
# If the GECOS field contains a string like ``lastname, firstname'' then you
# should set it to ``.*''.
#
-# This can be useful if you see the following behavior: you address a e-mail
+# This can be useful if you see the following behavior: you address an e-mail
# to user ID ``stevef'' whose full name is ``Steve Franklin''. If mutt expands
# ``stevef'' to ``"Franklin" stevef@foo.bar'' then you should set the $gecos_mask to
# a regular expression that will match the whole name so mutt will expand
# The $weed setting applies.
#
#
-# set help=yes
+# set header_cache=""
+#
+# Name: header_cache
+# Type: path
+# Default: ""
+#
+#
+# This variable points to the header cache database.
+# If pointing to a directory Mutt will contain a header cache
+# database file per folder, if pointing to a file that file will
+# be a single global header cache. By default it is unset so no header
+# caching will be used.
+#
+# Header caching can greatly improve speed when opening POP, IMAP
+# MH or Maildir folders, see ``caching'' for details.
+#
+#
+# set header_cache_compress=yes
+#
+# Name: header_cache_compress
+# Type: boolean
+# Default: yes
+#
+#
+# When mutt is compiled with qdbm or tokyocabinet as header cache backend,
+# this option determines whether the database will be compressed.
+# Compression results in database files roughly being one fifth
+# of the usual diskspace, but the uncompression can result in a
+# slower opening of cached folder(s) which in general is still
+# much faster than opening non header cached folders.
+#
+#
+# set header_cache_pagesize="16384"
+#
+# Name: header_cache_pagesize
+# Type: string
+# Default: "16384"
+#
+#
+# When mutt is compiled with either gdbm or bdb4 as the header cache backend,
+# this option changes the database page size. Too large or too small
+# values can waste space, memory, or CPU time. The default should be more
+# or less optimal for most use cases.
+#
+#
+# set help=yes
#
# Name: help
# Type: boolean
# The file in which Mutt will save its history.
#
#
+# set honor_disposition=no
+#
+# Name: honor_disposition
+# Type: boolean
+# Default: no
+#
+#
+# When set, Mutt will not display attachments with a
+# disposition of ``attachment'' inline even if it could
+# render the part to plain text. These MIME parts can only
+# be viewed from the attachment menu.
+#
+# If unset, Mutt will render all MIME parts it can
+# properly transform to plain text.
+#
+#
# set honor_followup_to=yes
#
# Name: honor_followup_to
#
#
# Specifies the password for your IMAP account. If unset, Mutt will
-# prompt you for your password when you invoke the <fetch-mail> function
+# prompt you for your password when you invoke the <imap-fetch-mail> function
# or try to open an IMAP folder.
#
# Warning: you should only use this option when you are on a
# message to which you are replying. You are strongly encouraged not to
# change this value, as it tends to agitate the more fanatical netizens.
#
+# The value of this option is ignored if $text_flowed is set, too because
+# the quoting mechanism is strictly defined for format=flowed.
+#
# This option is a format string, please see the description of
# $index_format for supported printf(3)-style sequences.
#
-# Because for format=lowed style messages the quoting mechanism
-# is strictly defined, this setting is ignored if $text_flowed is
-# set.
-#
#
# set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
#
# DOING!
#
#
-# set header_cache=""
-#
-# Name: header_cache
-# Type: path
-# Default: ""
-#
-#
-# This variable points to the header cache database.
-# If pointing to a directory Mutt will contain a header cache
-# database file per folder, if pointing to a file that file will
-# be a single global header cache. By default it is unset so no header
-# caching will be used.
-#
-# Header caching can greatly improve speed when opening POP, IMAP
-# MH or Maildir folders, see ``caching'' for details.
-#
-#
# set maildir_header_cache_verify=yes
#
# Name: maildir_header_cache_verify
# folders).
#
#
-# set header_cache_pagesize="16384"
-#
-# Name: header_cache_pagesize
-# Type: string
-# Default: "16384"
-#
-#
-# When mutt is compiled with either gdbm or bdb4 as the header cache backend,
-# this option changes the database page size. Too large or too small
-# values can waste space, memory, or CPU time. The default should be more
-# or less optimal for most use cases.
-#
-#
-# set header_cache_compress=yes
-#
-# Name: header_cache_compress
-# Type: boolean
-# Default: yes
-#
-#
-# When mutt is compiled with qdbm or tokyocabinet as header cache backend,
-# this option determines whether the database will be compressed.
-# Compression results in database files roughly being one fifth
-# of the usual diskspace, but the uncompression can result in a
-# slower opening of cached folder(s) which in general is still
-# much faster than opening non header cached folders.
-#
-#
# set maildir_trash=no
#
# Name: maildir_trash
#
#
# The default mailbox type used when creating new folders. May be any of
-# ``mbox'', ``MMDF'', ``MH'' and ``Maildir''.
-#
-#
-# set metoo=no
-#
-# Name: metoo
-# Type: boolean
-# Default: no
-#
-#
-# If unset, Mutt will remove your address (see the ``alternates''
-# command) from the list of recipients when replying to a message.
+# ``mbox'', ``MMDF'', ``MH'' and ``Maildir''. This is overriden by the
+# -m command-line option.
#
#
# set menu_context=0
# (useful for slow links to avoid many redraws).
#
#
+# set message_cache_clean=no
+#
+# Name: message_cache_clean
+# Type: boolean
+# Default: no
+#
+#
+# If set, mutt will clean out obsolete entries from the message cache when
+# the mailbox is synchronized. You probably only want to set it
+# every once in a while, since it can be a little slow
+# (especially for large folders).
+#
+#
+# set message_cachedir=""
+#
+# Name: message_cachedir
+# Type: path
+# Default: ""
+#
+#
+# Set this to a directory and mutt will cache copies of messages from
+# your IMAP and POP servers here. You are free to remove entries at any
+# time.
+#
+# When setting this variable to a directory, mutt needs to fetch every
+# remote message only once and can perform regular expression searches
+# as fast as for local folders.
+#
+# Also see the $message_cache_clean variable.
+#
+#
+# set message_format="%s"
+#
+# Name: message_format
+# Type: string
+# Default: "%s"
+#
+#
+# This is the string displayed in the ``attachment'' menu for
+# attachments of type message/rfc822. For a full listing of defined
+# printf(3)-like sequences see the section on $index_format.
+#
+#
# set meta_key=no
#
# Name: meta_key
# ``x''.
#
#
+# set metoo=no
+#
+# Name: metoo
+# Type: boolean
+# Default: no
+#
+#
+# If unset, Mutt will remove your address (see the ``alternates''
+# command) from the list of recipients when replying to a message.
+#
+#
# set mh_purge=no
#
# Name: mh_purge
# a ``mbox-hook'' command.
#
#
-# set message_cachedir=""
-#
-# Name: message_cachedir
-# Type: path
-# Default: ""
-#
-#
-# Set this to a directory and mutt will cache copies of messages from
-# your IMAP and POP servers here. You are free to remove entries at any
-# time.
-#
-# When setting this variable to a directory, mutt needs to fetch every
-# remote message only once and can perform regular expression searches
-# as fast as for local folders.
-#
-# Also see the $message_cache_clean variable.
-#
-#
-# set message_cache_clean=no
-#
-# Name: message_cache_clean
-# Type: boolean
-# Default: no
-#
-#
-# If set, mutt will clean out obsolete entries from the message cache when
-# the mailbox is synchronized. You probably only want to set it
-# every once in a while, since it can be a little slow
-# (especially for large folders).
-#
-#
-# set message_format="%s"
-#
-# Name: message_format
-# Type: string
-# Default: "%s"
-#
-#
-# This is the string displayed in the ``attachment'' menu for
-# attachments of type message/rfc822. For a full listing of defined
-# printf(3)-like sequences see the section on $index_format.
-#
-#
# set narrow_tree=no
#
# Name: narrow_tree
# default, Mutt will display the line after the last one on the screen
# at the top of the next page (0 lines of context).
#
+# This variable also specifies the amount of context given for search
+# results. If positive, this many lines will be given before a match,
+# if 0, the match will be top-aligned.
+#
#
# set pager_format="-%Z- %C/%m: %-20.20n %s%* -- (%P)"
#
# function.
#
#
-# set crypt_autosign=no
+# set pgp_auto_decode=no
#
-# Name: crypt_autosign
+# Name: pgp_auto_decode
# Type: boolean
# Default: no
#
#
-# Setting this variable will cause Mutt to always attempt to
-# cryptographically sign outgoing messages. This can be overridden
-# by use of the pgp menu, when signing is not required or
-# encryption is requested as well. If $smime_is_default is set,
-# then OpenSSL is used instead to create S/MIME messages and settings can
-# be overridden by use of the smime menu instead of the pgp menu.
-# (Crypto only)
+# If set, mutt will automatically attempt to decrypt traditional PGP
+# messages whenever the user performs an operation which ordinarily would
+# result in the contents of the message being operated on. For example,
+# if the user displays a pgp-traditional message which has not been manually
+# checked with the <check-traditional-pgp> function, mutt will automatically
+# check the message for traditional pgp.
#
#
-# set crypt_autoencrypt=no
+# set pgp_autoinline=no
#
-# Name: crypt_autoencrypt
+# Name: pgp_autoinline
# Type: boolean
# Default: no
#
#
-# Setting this variable will cause Mutt to always attempt to PGP
-# encrypt outgoing messages. This is probably only useful in
-# connection to the ``send-hook'' command. It can be overridden
-# by use of the pgp menu, when encryption is not required or
-# signing is requested as well. If $smime_is_default is set,
-# then OpenSSL is used instead to create S/MIME messages and
-# settings can be overridden by use of the smime menu instead.
-# (Crypto only)
+# This option controls whether Mutt generates old-style inline
+# (traditional) PGP encrypted or signed messages under certain
+# circumstances. This can be overridden by use of the pgp menu,
+# when inline is not required.
#
+# Note that Mutt might automatically use PGP/MIME for messages
+# which consist of more than a single MIME part. Mutt can be
+# configured to ask before sending PGP/MIME messages when inline
+# (traditional) would not work.
#
-# set pgp_ignore_subkeys=yes
-#
-# Name: pgp_ignore_subkeys
-# Type: boolean
-# Default: yes
+# Also see the $pgp_mime_auto variable.
#
+# Also note that using the old-style PGP message format is strongly
+# deprecated.
+# (PGP only)
#
-# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead,
-# the principal key will inherit the subkeys' capabilities. Unset this
-# if you want to play interesting key selection games.
-# (PGP only)
#
-#
-# set crypt_replyencrypt=yes
+# set pgp_check_exit=yes
#
-# Name: crypt_replyencrypt
+# Name: pgp_check_exit
# Type: boolean
# Default: yes
#
#
-# If set, automatically PGP or OpenSSL encrypt replies to messages which are
-# encrypted.
-# (Crypto only)
+# If set, mutt will check the exit code of the PGP subprocess when
+# signing or encrypting. A non-zero exit code means that the
+# subprocess failed.
+# (PGP only)
#
#
-# set crypt_replysign=no
+# set pgp_clearsign_command=""
#
-# Name: crypt_replysign
-# Type: boolean
-# Default: no
+# Name: pgp_clearsign_command
+# Type: string
+# Default: ""
#
#
-# If set, automatically PGP or OpenSSL sign replies to messages which are
-# signed.
+# This format is used to create an old-style ``clearsigned'' PGP
+# message. Note that the use of this format is strongly
+# deprecated.
#
-# Note: this does not work on messages that are encrypted
-# and signed!
-# (Crypto only)
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
#
#
-# set crypt_replysignencrypted=no
+# set pgp_decode_command=""
#
-# Name: crypt_replysignencrypted
-# Type: boolean
-# Default: no
-#
+# Name: pgp_decode_command
+# Type: string
+# Default: ""
#
-# If set, automatically PGP or OpenSSL sign replies to messages
-# which are encrypted. This makes sense in combination with
-# $crypt_replyencrypt, because it allows you to sign all
-# messages which are automatically encrypted. This works around
-# the problem noted in $crypt_replysign, that mutt is not able
-# to find out whether an encrypted message is also signed.
-# (Crypto only)
#
+# This format strings specifies a command which is used to decode
+# application/pgp attachments.
#
-# set crypt_timestamp=yes
-#
-# Name: crypt_timestamp
-# Type: boolean
-# Default: yes
+# The PGP command formats have their own set of printf(3)-like sequences:
+# %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
+# string otherwise. Note: This may be used with a %? construct.
+# %f Expands to the name of a file containing a message.
+# %s Expands to the name of a file containing the signature part
+# of a multipart/signed attachment when verifying it.
+# %a The value of $pgp_sign_as.
+# %r One or more key IDs.
#
#
-# If set, mutt will include a time stamp in the lines surrounding
-# PGP or S/MIME output, so spoofing such lines is more difficult.
-# If you are using colors to mark these lines, and rely on these,
-# you may unset this setting.
-# (Crypto only)
+# For examples on how to configure these formats for the various versions
+# of PGP which are floating around, see the pgp and gpg sample configuration files in
+# the samples/ subdirectory which has been installed on your system
+# alongside the documentation.
+# (PGP only)
#
#
-# set pgp_use_gpg_agent=no
+# set pgp_decrypt_command=""
#
-# Name: pgp_use_gpg_agent
-# Type: boolean
-# Default: no
+# Name: pgp_decrypt_command
+# Type: string
+# Default: ""
#
#
-# If set, mutt will use a possibly-running gpg-agent(1) process.
+# This command is used to decrypt a PGP encrypted message.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
# (PGP only)
#
#
-# set crypt_verify_sig=yes
+# set pgp_encrypt_only_command=""
#
-# Name: crypt_verify_sig
-# Type: quadoption
-# Default: yes
-#
-#
-# If ``yes'', always attempt to verify PGP or S/MIME signatures.
-# If ``ask-*'', ask whether or not to verify the signature.
-# If \Fi``no'', never attempt to verify cryptographic signatures.
-# (Crypto only)
-#
+# Name: pgp_encrypt_only_command
+# Type: string
+# Default: ""
#
-# set smime_is_default=no
-#
-# Name: smime_is_default
-# Type: boolean
-# Default: no
#
+# This command is used to encrypt a body part without signing it.
#
-# The default behaviour of mutt is to use PGP on all auto-sign/encryption
-# operations. To override and to use OpenSSL instead this must be set.
-# However, this has no effect while replying, since mutt will automatically
-# select the same application that was used to sign/encrypt the original
-# message. (Note that this variable can be overridden by unsetting $crypt_autosmime.)
-# (S/MIME only)
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
#
#
-# set smime_ask_cert_label=yes
+# set pgp_encrypt_sign_command=""
#
-# Name: smime_ask_cert_label
-# Type: boolean
-# Default: yes
-#
-#
-# This flag controls whether you want to be asked to enter a label
-# for a certificate about to be added to the database or not. It is
-# set by default.
-# (S/MIME only)
-#
+# Name: pgp_encrypt_sign_command
+# Type: string
+# Default: ""
#
-# set smime_decrypt_use_default_key=yes
-#
-# Name: smime_decrypt_use_default_key
-# Type: boolean
-# Default: yes
#
+# This command is used to both sign and encrypt a body part.
#
-# If set (default) this tells mutt to use the default key for decryption. Otherwise,
-# if managing multiple certificate-key-pairs, mutt will try to use the mailbox-address
-# to determine the key to use. It will ask you to supply a key, if it can't find one.
-# (S/MIME only)
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
#
#
# set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u"
# (PGP only)
#
#
+# set pgp_export_command=""
+#
+# Name: pgp_export_command
+# Type: string
+# Default: ""
+#
+#
+# This command is used to export a public key from the user's
+# key ring.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
+# (PGP only)
+#
+#
+# set pgp_getkeys_command=""
+#
+# Name: pgp_getkeys_command
+# Type: string
+# Default: ""
+#
+#
+# This command is invoked whenever mutt will need public key information.
+# Of the sequences supported by $pgp_decode_command, %r is the only
+# printf(3)-like sequence used with this format.
+# (PGP only)
+#
+#
# set pgp_good_sign=""
#
# Name: pgp_good_sign
# (PGP only)
#
#
-# set pgp_check_exit=yes
+# set pgp_ignore_subkeys=yes
#
-# Name: pgp_check_exit
+# Name: pgp_ignore_subkeys
# Type: boolean
# Default: yes
#
#
-# If set, mutt will check the exit code of the PGP subprocess when
-# signing or encrypting. A non-zero exit code means that the
-# subprocess failed.
+# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead,
+# the principal key will inherit the subkeys' capabilities. Unset this
+# if you want to play interesting key selection games.
# (PGP only)
#
#
-# set pgp_long_ids=no
+# set pgp_import_command=""
#
-# Name: pgp_long_ids
-# Type: boolean
-# Default: no
+# Name: pgp_import_command
+# Type: string
+# Default: ""
#
#
-# If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs.
+# This command is used to import a key from a message into
+# the user's public key ring.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
# (PGP only)
#
#
-# set pgp_retainable_sigs=no
+# set pgp_list_pubring_command=""
#
-# Name: pgp_retainable_sigs
-# Type: boolean
-# Default: no
+# Name: pgp_list_pubring_command
+# Type: string
+# Default: ""
#
#
-# If set, signed and encrypted messages will consist of nested
-# multipart/signed and multipart/encrypted body parts.
+# This command is used to list the public key ring's contents. The
+# output format must be analogous to the one used by
+# gpg --list-keys --with-colons.
#
-# This is useful for applications like encrypted and signed mailing
-# lists, where the outer layer (multipart/encrypted) can be easily
-# removed, while the inner multipart/signed part is retained.
+# This format is also generated by the pgpring utility which comes
+# with mutt.
+#
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
# (PGP only)
#
#
-# set pgp_autoinline=no
+# set pgp_list_secring_command=""
#
-# Name: pgp_autoinline
-# Type: boolean
-# Default: no
-#
+# Name: pgp_list_secring_command
+# Type: string
+# Default: ""
#
-# This option controls whether Mutt generates old-style inline
-# (traditional) PGP encrypted or signed messages under certain
-# circumstances. This can be overridden by use of the pgp menu,
-# when inline is not required.
#
-# Note that Mutt might automatically use PGP/MIME for messages
-# which consist of more than a single MIME part. Mutt can be
-# configured to ask before sending PGP/MIME messages when inline
-# (traditional) would not work.
+# This command is used to list the secret key ring's contents. The
+# output format must be analogous to the one used by:
+# gpg --list-keys --with-colons.
#
-# Also see the $pgp_mime_auto variable.
+# This format is also generated by the pgpring utility which comes
+# with mutt.
#
-# Also note that using the old-style PGP message format is strongly
-# deprecated.
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
# (PGP only)
#
#
-# set pgp_replyinline=no
+# set pgp_long_ids=no
#
-# Name: pgp_replyinline
+# Name: pgp_long_ids
# Type: boolean
# Default: no
#
#
-# Setting this variable will cause Mutt to always attempt to
-# create an inline (traditional) message when replying to a
-# message which is PGP encrypted/signed inline. This can be
-# overridden by use of the pgp menu, when inline is not
-# required. This option does not automatically detect if the
-# (replied-to) message is inline; instead it relies on Mutt
+# If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs.
+# (PGP only)
+#
+#
+# set pgp_mime_auto=ask-yes
+#
+# Name: pgp_mime_auto
+# Type: quadoption
+# Default: ask-yes
+#
+#
+# This option controls whether Mutt will prompt you for
+# automatically sending a (signed/encrypted) message using
+# PGP/MIME when inline (traditional) fails (for any reason).
+#
+# Also note that using the old-style PGP message format is strongly
+# deprecated.
+# (PGP only)
+#
+#
+# set pgp_replyinline=no
+#
+# Name: pgp_replyinline
+# Type: boolean
+# Default: no
+#
+#
+# Setting this variable will cause Mutt to always attempt to
+# create an inline (traditional) message when replying to a
+# message which is PGP encrypted/signed inline. This can be
+# overridden by use of the pgp menu, when inline is not
+# required. This option does not automatically detect if the
+# (replied-to) message is inline; instead it relies on Mutt
# internals for previously checked/flagged messages.
#
# Note that Mutt might automatically use PGP/MIME for messages
# (PGP only)
#
#
+# set pgp_retainable_sigs=no
+#
+# Name: pgp_retainable_sigs
+# Type: boolean
+# Default: no
+#
+#
+# If set, signed and encrypted messages will consist of nested
+# multipart/signed and multipart/encrypted body parts.
+#
+# This is useful for applications like encrypted and signed mailing
+# lists, where the outer layer (multipart/encrypted) can be easily
+# removed, while the inner multipart/signed part is retained.
+# (PGP only)
+#
+#
# set pgp_show_unusable=yes
#
# Name: pgp_show_unusable
# (PGP only)
#
#
-# set pgp_strict_enc=yes
+# set pgp_sign_command=""
#
-# Name: pgp_strict_enc
-# Type: boolean
-# Default: yes
-#
-#
-# If set, Mutt will automatically encode PGP/MIME signed messages as
-# quoted-printable. Please note that unsetting this variable may
-# lead to problems with non-verifyable PGP signatures, so only change
-# this if you know what you are doing.
-# (PGP only)
-#
+# Name: pgp_sign_command
+# Type: string
+# Default: ""
#
-# set pgp_timeout=300
-#
-# Name: pgp_timeout
-# Type: number
-# Default: 300
#
+# This command is used to create the detached PGP signature for a
+# multipart/signed PGP/MIME body part.
#
-# The number of seconds after which a cached passphrase will expire if
-# not used.
+# This is a format string, see the $pgp_decode_command command for
+# possible printf(3)-like sequences.
# (PGP only)
#
#
# (PGP only)
#
#
-# set pgp_mime_auto=ask-yes
-#
-# Name: pgp_mime_auto
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# This option controls whether Mutt will prompt you for
-# automatically sending a (signed/encrypted) message using
-# PGP/MIME when inline (traditional) fails (for any reason).
-#
-# Also note that using the old-style PGP message format is strongly
-# deprecated.
-# (PGP only)
-#
-#
-# set pgp_auto_decode=no
+# set pgp_strict_enc=yes
#
-# Name: pgp_auto_decode
+# Name: pgp_strict_enc
# Type: boolean
-# Default: no
+# Default: yes
#
#
-# If set, mutt will automatically attempt to decrypt traditional PGP
-# messages whenever the user performs an operation which ordinarily would
-# result in the contents of the message being operated on. For example,
-# if the user displays a pgp-traditional message which has not been manually
-# checked with the <check-traditional-pgp> function, mutt will automatically
-# check the message for traditional pgp.
+# If set, Mutt will automatically encode PGP/MIME signed messages as
+# quoted-printable. Please note that unsetting this variable may
+# lead to problems with non-verifyable PGP signatures, so only change
+# this if you know what you are doing.
+# (PGP only)
#
#
-# set pgp_decode_command=""
+# set pgp_timeout=300
#
-# Name: pgp_decode_command
-# Type: string
-# Default: ""
-#
-#
-# This format strings specifies a command which is used to decode
-# application/pgp attachments.
-#
-# The PGP command formats have their own set of printf(3)-like sequences:
-# %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
-# string otherwise. Note: This may be used with a %? construct.
-# %f Expands to the name of a file containing a message.
-# %s Expands to the name of a file containing the signature part
-# of a multipart/signed attachment when verifying it.
-# %a The value of $pgp_sign_as.
-# %r One or more key IDs.
+# Name: pgp_timeout
+# Type: number
+# Default: 300
#
#
-# For examples on how to configure these formats for the various versions
-# of PGP which are floating around, see the pgp and gpg sample configuration files in
-# the samples/ subdirectory which has been installed on your system
-# alongside the documentation.
+# The number of seconds after which a cached passphrase will expire if
+# not used.
# (PGP only)
#
#
-# set pgp_getkeys_command=""
+# set pgp_use_gpg_agent=no
#
-# Name: pgp_getkeys_command
-# Type: string
-# Default: ""
+# Name: pgp_use_gpg_agent
+# Type: boolean
+# Default: no
#
#
-# This command is invoked whenever mutt will need public key information.
-# Of the sequences supported by $pgp_decode_command, %r is the only
-# printf(3)-like sequence used with this format.
+# If set, mutt will use a possibly-running gpg-agent(1) process.
# (PGP only)
#
#
# (PGP only)
#
#
-# set pgp_decrypt_command=""
+# set pgp_verify_key_command=""
#
-# Name: pgp_decrypt_command
+# Name: pgp_verify_key_command
# Type: string
# Default: ""
#
#
-# This command is used to decrypt a PGP encrypted message.
+# This command is used to verify key information from the key selection
+# menu.
#
# This is a format string, see the $pgp_decode_command command for
# possible printf(3)-like sequences.
# (PGP only)
#
#
-# set pgp_clearsign_command=""
+# set pipe_decode=no
#
-# Name: pgp_clearsign_command
-# Type: string
-# Default: ""
-#
+# Name: pipe_decode
+# Type: boolean
+# Default: no
#
-# This format is used to create a old-style ``clearsigned'' PGP
-# message. Note that the use of this format is strongly
-# deprecated.
#
-# This is a format string, see the $pgp_decode_command command for
-# possible printf(3)-like sequences.
-# (PGP only)
+# Used in connection with the <pipe-message> command. When unset,
+# Mutt will pipe the messages without any preprocessing. When set, Mutt
+# will weed headers and will attempt to decode the messages
+# first.
#
#
-# set pgp_sign_command=""
+# set pipe_sep="\n"
#
-# Name: pgp_sign_command
+# Name: pipe_sep
# Type: string
-# Default: ""
-#
+# Default: "\n"
#
-# This command is used to create the detached PGP signature for a
-# multipart/signed PGP/MIME body part.
#
-# This is a format string, see the $pgp_decode_command command for
-# possible printf(3)-like sequences.
-# (PGP only)
+# The separator to add between messages when piping a list of tagged
+# messages to an external Unix command.
#
#
-# set pgp_encrypt_sign_command=""
+# set pipe_split=no
#
-# Name: pgp_encrypt_sign_command
-# Type: string
-# Default: ""
-#
+# Name: pipe_split
+# Type: boolean
+# Default: no
#
-# This command is used to both sign and encrypt a body part.
#
-# This is a format string, see the $pgp_decode_command command for
-# possible printf(3)-like sequences.
-# (PGP only)
+# Used in connection with the <pipe-message> function following
+# <tag-prefix>. If this variable is unset, when piping a list of
+# tagged messages Mutt will concatenate the messages and will pipe them
+# all concatenated. When set, Mutt will pipe the messages one by one.
+# In both cases the messages are piped in the current sorted order,
+# and the $pipe_sep separator is added after each message.
#
#
-# set pgp_encrypt_only_command=""
+# set pop_auth_try_all=yes
#
-# Name: pgp_encrypt_only_command
-# Type: string
-# Default: ""
-#
+# Name: pop_auth_try_all
+# Type: boolean
+# Default: yes
#
-# This command is used to encrypt a body part without signing it.
#
-# This is a format string, see the $pgp_decode_command command for
-# possible printf(3)-like sequences.
-# (PGP only)
+# If set, Mutt will try all available authentication methods.
+# When unset, Mutt will only fall back to other authentication
+# methods if the previous methods are unavailable. If a method is
+# available but authentication fails, Mutt will not connect to the POP server.
#
#
-# set pgp_import_command=""
+# set pop_authenticators=""
#
-# Name: pgp_import_command
+# Name: pop_authenticators
# Type: string
# Default: ""
#
#
-# This command is used to import a key from a message into
-# the user's public key ring.
+# This is a colon-delimited list of authentication methods mutt may
+# attempt to use to log in to an POP server, in the order mutt should
+# try them. Authentication methods are either ``user'', ``apop'' or any
+# SASL mechanism, eg ``digest-md5'', ``gssapi'' or ``cram-md5''.
+# This option is case-insensitive. If this option is unset
+# (the default) mutt will try all available methods, in order from
+# most-secure to least-secure.
#
-# This is a format string, see the $pgp_decode_command command for
-# possible printf(3)-like sequences.
-# (PGP only)
+# Example:
+# set pop_authenticators="digest-md5:apop:user"
#
#
-# set pgp_export_command=""
+# set pop_checkinterval=60
#
-# Name: pgp_export_command
-# Type: string
-# Default: ""
+# Name: pop_checkinterval
+# Type: number
+# Default: 60
#
#
-# This command is used to export a public key from the user's
-# key ring.
+# This variable configures how often (in seconds) mutt should look for
+# new mail in the currently selected mailbox if it is a POP mailbox.
#
-# This is a format string, see the $pgp_decode_command command for
-# possible printf(3)-like sequences.
-# (PGP only)
#
-#
-# set pgp_verify_key_command=""
+# set pop_delete=ask-no
#
-# Name: pgp_verify_key_command
-# Type: string
-# Default: ""
-#
+# Name: pop_delete
+# Type: quadoption
+# Default: ask-no
#
-# This command is used to verify key information from the key selection
-# menu.
#
-# This is a format string, see the $pgp_decode_command command for
-# possible printf(3)-like sequences.
-# (PGP only)
+# If set, Mutt will delete successfully downloaded messages from the POP
+# server when using the <fetch-mail> function. When unset, Mutt will
+# download messages but also leave them on the POP server.
#
#
-# set pgp_list_secring_command=""
+# set pop_host=""
#
-# Name: pgp_list_secring_command
+# Name: pop_host
# Type: string
# Default: ""
#
#
-# This command is used to list the secret key ring's contents. The
-# output format must be analogous to the one used by:
-# gpg --list-keys --with-colons.
-#
-# This format is also generated by the pgpring utility which comes
-# with mutt.
+# The name of your POP server for the <fetch-mail> function. You
+# can also specify an alternative port, username and password, ie:
+# [pop[s]://][username[:password]@]popserver[:port]
#
-# This is a format string, see the $pgp_decode_command command for
-# possible printf(3)-like sequences.
-# (PGP only)
+# where ``[...]'' denotes an optional part.
#
#
-# set pgp_list_pubring_command=""
+# set pop_last=no
#
-# Name: pgp_list_pubring_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to list the public key ring's contents. The
-# output format must be analogous to the one used by
-# gpg --list-keys --with-colons.
+# Name: pop_last
+# Type: boolean
+# Default: no
#
-# This format is also generated by the pgpring utility which comes
-# with mutt.
#
-# This is a format string, see the $pgp_decode_command command for
-# possible printf(3)-like sequences.
-# (PGP only)
+# If this variable is set, mutt will try to use the ``LAST'' POP command
+# for retrieving only unread messages from the POP server when using
+# the <fetch-mail> function.
#
#
-# set forward_decrypt=yes
+# set pop_pass=""
#
-# Name: forward_decrypt
-# Type: boolean
-# Default: yes
+# Name: pop_pass
+# Type: string
+# Default: ""
#
#
-# Controls the handling of encrypted messages when forwarding a message.
-# When set, the outer layer of encryption is stripped off. This
-# variable is only used if $mime_forward is set and
-# $mime_forward_decode is unset.
-# (PGP only)
+# Specifies the password for your POP account. If unset, Mutt will
+# prompt you for your password when you open a POP mailbox.
+#
+# Warning: you should only use this option when you are on a
+# fairly secure machine, because the superuser can read your muttrc
+# even if you are the only one who can read the file.
#
#
-# set smime_timeout=300
+# set pop_reconnect=ask-yes
#
-# Name: smime_timeout
-# Type: number
-# Default: 300
+# Name: pop_reconnect
+# Type: quadoption
+# Default: ask-yes
#
#
-# The number of seconds after which a cached passphrase will expire if
-# not used.
-# (S/MIME only)
+# Controls whether or not Mutt will try to reconnect to the POP server if
+# the connection is lost.
#
#
-# set smime_encrypt_with=""
+# set pop_user=""
#
-# Name: smime_encrypt_with
+# Name: pop_user
# Type: string
# Default: ""
#
#
-# This sets the algorithm that should be used for encryption.
-# Valid choices are ``des'', ``des3'', ``rc2-40'', ``rc2-64'', ``rc2-128''.
-# If unset, ``3des'' (TripleDES) is used.
-# (S/MIME only)
+# Your login name on the POP server.
+#
+# This variable defaults to your user name on the local machine.
#
#
-# set smime_keys=""
+# set post_indent_string=""
#
-# Name: smime_keys
-# Type: path
+# Name: post_indent_string
+# Type: string
# Default: ""
#
#
-# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
-# storage and retrieval of keys/certs by itself. This is very basic right now,
-# and stores keys and certificates in two different directories, both
-# named as the hash-value retrieved from OpenSSL. There is an index file
-# which contains mailbox-address keyid pair, and which can be manually
-# edited. This option points to the location of the private keys.
-# (S/MIME only)
+# Similar to the $attribution variable, Mutt will append this
+# string after the inclusion of a message which is being replied to.
#
#
-# set smime_ca_location=""
+# set postpone=ask-yes
#
-# Name: smime_ca_location
-# Type: path
-# Default: ""
+# Name: postpone
+# Type: quadoption
+# Default: ask-yes
#
#
-# This variable contains the name of either a directory, or a file which
-# contains trusted certificates for use with OpenSSL.
-# (S/MIME only)
+# Controls whether or not messages are saved in the $postponed
+# mailbox when you elect not to send immediately.
+#
+# Also see the $recall variable.
#
#
-# set smime_certificates=""
+# set postponed="~/postponed"
#
-# Name: smime_certificates
+# Name: postponed
# Type: path
-# Default: ""
+# Default: "~/postponed"
#
#
-# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
-# storage and retrieval of keys by itself. This is very basic right
-# now, and keys and certificates are stored in two different
-# directories, both named as the hash-value retrieved from
-# OpenSSL. There is an index file which contains mailbox-address
-# keyid pairs, and which can be manually edited. This option points to
-# the location of the certificates.
-# (S/MIME only)
+# Mutt allows you to indefinitely ``postpone sending a message'' which
+# you are editing. When you choose to postpone a message, Mutt saves it
+# in the mailbox specified by this variable.
#
+# Also see the $postpone variable.
#
-# set smime_decrypt_command=""
+#
+# set preconnect=""
#
-# Name: smime_decrypt_command
+# Name: preconnect
# Type: string
# Default: ""
#
#
-# This format string specifies a command which is used to decrypt
-# application/x-pkcs7-mime attachments.
-#
-# The OpenSSL command formats have their own set of printf(3)-like sequences
-# similar to PGP's:
-# %f Expands to the name of a file containing a message.
-# %s Expands to the name of a file containing the signature part
-# of a multipart/signed attachment when verifying it.
-# %k The key-pair specified with $smime_default_key
-# %c One or more certificate IDs.
-# %a The algorithm used for encryption.
-# %C CA location: Depending on whether $smime_ca_location
-# points to a directory or file, this expands to
-# ``-CApath $smime_ca_location'' or ``-CAfile $smime_ca_location''.
+# If set, a shell command to be executed if mutt fails to establish
+# a connection to the server. This is useful for setting up secure
+# connections, e.g. with ssh(1). If the command returns a nonzero
+# status, mutt gives up opening the server. Example:
+# set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net \
+# sleep 20 < /dev/null > /dev/null"
#
+# Mailbox ``foo'' on ``mailhost.net'' can now be reached
+# as ``{localhost:1234}foo''.
#
-# For examples on how to configure these formats, see the smime.rc in
-# the samples/ subdirectory which has been installed on your system
-# alongside the documentation.
-# (S/MIME only)
+# Note: For this example to work, you must be able to log in to the
+# remote machine without having to enter a password.
#
#
-# set smime_verify_command=""
+# set print=ask-no
#
-# Name: smime_verify_command
-# Type: string
-# Default: ""
-#
+# Name: print
+# Type: quadoption
+# Default: ask-no
#
-# This command is used to verify S/MIME signatures of type multipart/signed.
#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
+# Controls whether or not Mutt really prints messages.
+# This is set to ``ask-no'' by default, because some people
+# accidentally hit ``p'' often.
#
#
-# set smime_verify_opaque_command=""
+# set print_command="lpr"
#
-# Name: smime_verify_opaque_command
-# Type: string
-# Default: ""
-#
+# Name: print_command
+# Type: path
+# Default: "lpr"
#
-# This command is used to verify S/MIME signatures of type
-# application/x-pkcs7-mime.
#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
+# This specifies the command pipe that should be used to print messages.
#
#
-# set smime_sign_command=""
+# set print_decode=yes
#
-# Name: smime_sign_command
-# Type: string
-# Default: ""
-#
+# Name: print_decode
+# Type: boolean
+# Default: yes
#
-# This command is used to created S/MIME signatures of type
-# multipart/signed, which can be read by all mail clients.
#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
+# Used in connection with the <print-message> command. If this
+# option is set, the message is decoded before it is passed to the
+# external command specified by $print_command. If this option
+# is unset, no processing will be applied to the message when
+# printing it. The latter setting may be useful if you are using
+# some advanced printer filter which is able to properly format
+# e-mail messages for printing.
#
#
-# set smime_sign_opaque_command=""
+# set print_split=no
#
-# Name: smime_sign_opaque_command
-# Type: string
-# Default: ""
+# Name: print_split
+# Type: boolean
+# Default: no
#
#
-# This command is used to created S/MIME signatures of type
-# application/x-pkcs7-signature, which can only be handled by mail
-# clients supporting the S/MIME extension.
+# Used in connection with the <print-message> command. If this option
+# is set, the command specified by $print_command is executed once for
+# each message which is to be printed. If this option is unset,
+# the command specified by $print_command is executed only once, and
+# all the messages are concatenated, with a form feed as the message
+# separator.
#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
+# Those who use the enscript(1) program's mail-printing mode will
+# most likely want to set this option.
#
#
-# set smime_encrypt_command=""
+# set prompt_after=yes
#
-# Name: smime_encrypt_command
-# Type: string
-# Default: ""
-#
+# Name: prompt_after
+# Type: boolean
+# Default: yes
#
-# This command is used to create encrypted S/MIME messages.
#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
+# If you use an external $pager, setting this variable will
+# cause Mutt to prompt you for a command when the pager exits rather
+# than returning to the index menu. If unset, Mutt will return to the
+# index menu when the external pager exits.
#
#
-# set smime_pk7out_command=""
+# set query_command=""
#
-# Name: smime_pk7out_command
-# Type: string
+# Name: query_command
+# Type: path
# Default: ""
#
#
-# This command is used to extract PKCS7 structures of S/MIME signatures,
-# in order to extract the public X509 certificate(s).
-#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
+# This specifies the command that mutt will use to make external address
+# queries. The string should contain a ``%s'', which will be substituted
+# with the query string the user types. See ``query'' for more
+# information.
#
#
-# set smime_get_cert_command=""
+# set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?"
#
-# Name: smime_get_cert_command
+# Name: query_format
# Type: string
-# Default: ""
+# Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?"
#
#
-# This command is used to extract X509 certificates from a PKCS7 structure.
+# This variable describes the format of the ``query'' menu. The
+# following printf(3)-style sequences are understood:
+# %a destination address
+# %c current entry number
+# %e extra information *
+# %n destination name
+# %t ``*'' if current entry is tagged, a space otherwise
+# %>X right justify the rest of the string and pad with ``X''
+# %|X pad to the end of the line with ``X''
+# %*X soft-fill with character ``X'' as pad
#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
#
+# For an explanation of ``soft-fill'', see the $index_format documentation.
#
-# set smime_get_signer_cert_command=""
-#
-# Name: smime_get_signer_cert_command
-# Type: string
-# Default: ""
+# * = can be optionally printed if nonzero, see the $status_format documentation.
#
#
-# This command is used to extract only the signers X509 certificate from a S/MIME
-# signature, so that the certificate's owner may get compared to the
-# email's ``From:'' field.
+# set quit=yes
+#
+# Name: quit
+# Type: quadoption
+# Default: yes
#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
+#
+# This variable controls whether ``quit'' and ``exit'' actually quit
+# from mutt. If this option is set, they do quit, if it is unset, they
+# have no effect, and if it is set to ask-yes or ask-no, you are
+# prompted for confirmation when you try to quit.
#
#
-# set smime_import_cert_command=""
+# set quote_regexp="^([ \t]*[|>:}#])+"
#
-# Name: smime_import_cert_command
-# Type: string
-# Default: ""
+# Name: quote_regexp
+# Type: regular expression
+# Default: "^([ \t]*[|>:}#])+"
#
#
-# This command is used to import a certificate via smime_keys.
+# A regular expression used in the internal pager to determine quoted
+# sections of text in the body of a message. Quoted text may be filtered
+# out using the <toggle-quoted> command, or colored according to the
+# ``color quoted'' family of directives.
#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
+# Higher levels of quoting may be colored differently (``color quoted1'',
+# ``color quoted2'', etc.). The quoting level is determined by removing
+# the last character from the matched text and recursively reapplying
+# the regular expression until it fails to produce a match.
#
+# Match detection may be overridden by the $smileys regular expression.
#
-# set smime_get_cert_email_command=""
+#
+# set read_inc=10
#
-# Name: smime_get_cert_email_command
-# Type: string
-# Default: ""
+# Name: read_inc
+# Type: number
+# Default: 10
#
#
-# This command is used to extract the mail address(es) used for storing
-# X509 certificates, and for verification purposes (to check whether the
-# certificate was issued for the sender's mailbox).
+# If set to a value greater than 0, Mutt will display which message it
+# is currently on when reading a mailbox or when performing search actions
+# such as search and limit. The message is printed after
+# this many messages have been read or searched (e.g., if set to 25, Mutt will
+# print a message when it is at message 25, and then again when it gets
+# to message 50). This variable is meant to indicate progress when
+# reading or searching large mailboxes which may take some time.
+# When set to 0, only a single message will appear before the reading
+# the mailbox.
#
-# This is a format string, see the $smime_decrypt_command command for
-# possible printf(3)-like sequences.
-# (S/MIME only)
+# Also see the $write_inc, $net_inc and $time_inc variables and the
+# ``tuning'' section of the manual for performance considerations.
#
#
-# set smime_default_key=""
+# set read_only=no
#
-# Name: smime_default_key
-# Type: string
-# Default: ""
+# Name: read_only
+# Type: boolean
+# Default: no
#
#
-# This is the default key-pair to use for signing. This must be set to the
-# keyid (the hash-value that OpenSSL generates) to work properly
-# (S/MIME only)
+# If set, all folders are opened in read-only mode.
#
#
-# set ssl_client_cert=""
+# set realname=""
#
-# Name: ssl_client_cert
-# Type: path
+# Name: realname
+# Type: string
# Default: ""
#
#
-# The file containing a client certificate and its associated private
-# key.
-#
-#
-# set ssl_force_tls=no
-#
-# Name: ssl_force_tls
-# Type: boolean
-# Default: no
-#
+# This variable specifies what ``real'' or ``personal'' name should be used
+# when sending messages.
#
-# If this variable is set, Mutt will require that all connections
-# to remote servers be encrypted. Furthermore it will attempt to
-# negotiate TLS even if the server does not advertise the capability,
-# since it would otherwise have to abort the connection anyway. This
-# option supersedes $ssl_starttls.
+# By default, this is the GECOS field from /etc/passwd. Note that this
+# variable will not be used when the user has set a real name
+# in the $from variable.
#
#
-# set ssl_starttls=yes
+# set recall=ask-yes
#
-# Name: ssl_starttls
+# Name: recall
# Type: quadoption
-# Default: yes
+# Default: ask-yes
#
#
-# If set (the default), mutt will attempt to use STARTTLS on servers
-# advertising the capability. When unset, mutt will not attempt to
-# use STARTTLS regardless of the server's capabilities.
+# Controls whether or not Mutt recalls postponed messages
+# when composing a new message.
+#
+# Setting this variable to is not generally useful, and thus not
+# recommended.
+#
+# Also see $postponed variable.
#
#
-# set certificate_file="~/.mutt_certificates"
+# set record="~/sent"
#
-# Name: certificate_file
+# Name: record
# Type: path
-# Default: "~/.mutt_certificates"
-#
+# Default: "~/sent"
#
-# This variable specifies the file where the certificates you trust
-# are saved. When an unknown certificate is encountered, you are asked
-# if you accept it or not. If you accept it, the certificate can also
-# be saved in this file and further connections are automatically
-# accepted.
#
-# You can also manually add CA certificates in this file. Any server
-# certificate that is signed with one of these CA certificates is
-# also automatically accepted.
+# This specifies the file into which your outgoing messages should be
+# appended. (This is meant as the primary method for saving a copy of
+# your messages, but another way to do this is using the ``my_hdr''
+# command to create a ``Bcc:'' field with your email address in it.)
#
-# Example:
-# set certificate_file=~/.mutt/certificates
+# The value of $record is overridden by the $force_name and
+# $save_name variables, and the ``fcc-hook'' command.
#
#
-# set ssl_usesystemcerts=yes
+# set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*"
#
-# Name: ssl_usesystemcerts
-# Type: boolean
-# Default: yes
+# Name: reply_regexp
+# Type: regular expression
+# Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*"
#
#
-# If set to yes, mutt will use CA certificates in the
-# system-wide certificate store when checking if a server certificate
-# is signed by a trusted CA.
+# A regular expression used to recognize reply messages when threading
+# and replying. The default value corresponds to the English "Re:" and
+# the German "Aw:".
#
#
-# set entropy_file=""
+# set reply_self=no
#
-# Name: entropy_file
-# Type: path
-# Default: ""
+# Name: reply_self
+# Type: boolean
+# Default: no
#
#
-# The file which includes random data that is used to initialize SSL
-# library functions.
+# If unset and you are replying to a message sent by you, Mutt will
+# assume that you want to reply to the recipients of that message rather
+# than to yourself.
+#
+# Also see the ``alternates'' command.
#
#
-# set ssl_use_sslv2=yes
+# set reply_to=ask-yes
#
-# Name: ssl_use_sslv2
-# Type: boolean
-# Default: yes
+# Name: reply_to
+# Type: quadoption
+# Default: ask-yes
#
#
-# This variables specifies whether to attempt to use SSLv2 in the
-# SSL authentication process.
+# If set, when replying to a message, Mutt will use the address listed
+# in the Reply-to: header as the recipient of the reply. If unset,
+# it will use the address in the From: header field instead. This
+# option is useful for reading a mailing list that sets the Reply-To:
+# header field to the list address and you want to send a private
+# message to the author of a message.
#
#
-# set ssl_use_sslv3=yes
+# set resolve=yes
#
-# Name: ssl_use_sslv3
+# Name: resolve
# Type: boolean
# Default: yes
#
#
-# This variables specifies whether to attempt to use SSLv3 in the
-# SSL authentication process.
+# When set, the cursor will be automatically advanced to the next
+# (possibly undeleted) message whenever a command that modifies the
+# current message is executed.
#
#
-# set ssl_use_tlsv1=yes
+# set reverse_alias=no
#
-# Name: ssl_use_tlsv1
+# Name: reverse_alias
# Type: boolean
-# Default: yes
+# Default: no
#
#
-# This variables specifies whether to attempt to use TLSv1 in the
-# SSL authentication process.
-#
-#
-# set ssl_min_dh_prime_bits=0
-#
-# Name: ssl_min_dh_prime_bits
-# Type: number
-# Default: 0
+# This variable controls whether or not Mutt will display the ``personal''
+# name from your aliases in the index menu if it finds an alias that
+# matches the message's sender. For example, if you have the following
+# alias:
+# alias juser abd30425@somewhere.net (Joe User)
#
+# and then you receive mail which contains the following header:
+# From: abd30425@somewhere.net
#
-# This variable specifies the minimum acceptable prime size (in bits)
-# for use in any Diffie-Hellman key exchange. A value of 0 will use
-# the default from the GNUTLS library.
+# It would be displayed in the index menu as ``Joe User'' instead of
+# ``abd30425@somewhere.net.'' This is useful when the person's e-mail
+# address is not human friendly.
#
#
-# set ssl_ca_certificates_file=""
+# set reverse_name=no
#
-# Name: ssl_ca_certificates_file
-# Type: path
-# Default: ""
+# Name: reverse_name
+# Type: boolean
+# Default: no
#
#
-# This variable specifies a file containing trusted CA certificates.
-# Any server certificate that is signed with one of these CA
-# certificates is also automatically accepted.
+# It may sometimes arrive that you receive mail to a certain machine,
+# move the messages to another machine, and reply to some the messages
+# from there. If this variable is set, the default From: line of
+# the reply messages is built using the address where you received the
+# messages you are replying to if that address matches your
+# ``alternates''. If the variable is unset, or the address that would be
+# used doesn't match your ``alternates'', the From: line will use
+# your address on the current machine.
#
-# Example:
-# set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
+# Also see the ``alternates'' command.
#
#
-# set pipe_split=no
+# set reverse_realname=yes
#
-# Name: pipe_split
+# Name: reverse_realname
# Type: boolean
-# Default: no
+# Default: yes
#
#
-# Used in connection with the <pipe-message> function following
-# <tag-prefix>. If this variable is unset, when piping a list of
-# tagged messages Mutt will concatenate the messages and will pipe them
-# all concatenated. When set, Mutt will pipe the messages one by one.
-# In both cases the messages are piped in the current sorted order,
-# and the $pipe_sep separator is added after each message.
+# This variable fine-tunes the behaviour of the $reverse_name feature.
+# When it is set, mutt will use the address from incoming messages as-is,
+# possibly including eventual real names. When it is unset, mutt will
+# override any such real names with the setting of the $realname variable.
#
#
-# set pipe_decode=no
+# set rfc2047_parameters=no
#
-# Name: pipe_decode
+# Name: rfc2047_parameters
# Type: boolean
# Default: no
#
#
-# Used in connection with the <pipe-message> command. When unset,
-# Mutt will pipe the messages without any preprocessing. When set, Mutt
-# will weed headers and will attempt to decode the messages
-# first.
-#
+# When this variable is set, Mutt will decode RFC2047-encoded MIME
+# parameters. You want to set this variable when mutt suggests you
+# to save attachments to files named like:
+# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
#
-# set pipe_sep="\n"
-#
-# Name: pipe_sep
-# Type: string
-# Default: "\n"
+# When this variable is set interactively, the change won't be
+# active until you change folders.
#
+# Note that this use of RFC2047's encoding is explicitly
+# prohibited by the standard, but nevertheless encountered in the
+# wild.
#
-# The separator to add between messages when piping a list of tagged
-# messages to an external Unix command.
+# Also note that setting this parameter will not have the effect
+# that mutt generates this kind of encoding. Instead, mutt will
+# unconditionally use the encoding specified in RFC2231.
#
#
-# set pop_authenticators=""
+# set save_address=no
#
-# Name: pop_authenticators
-# Type: string
-# Default: ""
-#
+# Name: save_address
+# Type: boolean
+# Default: no
#
-# This is a colon-delimited list of authentication methods mutt may
-# attempt to use to log in to an POP server, in the order mutt should
-# try them. Authentication methods are either ``user'', ``apop'' or any
-# SASL mechanism, eg ``digest-md5'', ``gssapi'' or ``cram-md5''.
-# This option is case-insensitive. If this option is unset
-# (the default) mutt will try all available methods, in order from
-# most-secure to least-secure.
#
-# Example:
-# set pop_authenticators="digest-md5:apop:user"
+# If set, mutt will take the sender's full address when choosing a
+# default folder for saving a mail. If $save_name or $force_name
+# is set too, the selection of the Fcc folder will be changed as well.
#
#
-# set pop_auth_try_all=yes
+# set save_empty=yes
#
-# Name: pop_auth_try_all
+# Name: save_empty
# Type: boolean
# Default: yes
#
#
-# If set, Mutt will try all available authentication methods.
-# When unset, Mutt will only fall back to other authentication
-# methods if the previous methods are unavailable. If a method is
-# available but authentication fails, Mutt will not connect to the POP server.
-#
-#
-# set pop_checkinterval=60
-#
-# Name: pop_checkinterval
-# Type: number
-# Default: 60
-#
+# When unset, mailboxes which contain no saved messages will be removed
+# when closed (the exception is $spoolfile which is never removed).
+# If set, mailboxes are never removed.
#
-# This variable configures how often (in seconds) mutt should look for
-# new mail in the currently selected mailbox if it is a POP mailbox.
+# Note: This only applies to mbox and MMDF folders, Mutt does not
+# delete MH and Maildir directories.
#
#
-# set pop_delete=ask-no
+# set save_history=0
#
-# Name: pop_delete
-# Type: quadoption
-# Default: ask-no
+# Name: save_history
+# Type: number
+# Default: 0
#
#
-# If set, Mutt will delete successfully downloaded messages from the POP
-# server when using the <fetch-mail> function. When unset, Mutt will
-# download messages but also leave them on the POP server.
+# This variable controls the size of the history (per category) saved in the
+# $history_file file.
#
#
-# set pop_host=""
+# set save_name=no
#
-# Name: pop_host
-# Type: string
-# Default: ""
+# Name: save_name
+# Type: boolean
+# Default: no
#
#
-# The name of your POP server for the <fetch-mail> function. You
-# can also specify an alternative port, username and password, ie:
-# [pop[s]://][username[:password]@]popserver[:port]
+# This variable controls how copies of outgoing messages are saved.
+# When set, a check is made to see if a mailbox specified by the
+# recipient address exists (this is done by searching for a mailbox in
+# the $folder directory with the username part of the
+# recipient address). If the mailbox exists, the outgoing message will
+# be saved to that mailbox, otherwise the message is saved to the
+# $record mailbox.
#
-# where ``[...]'' denotes an optional part.
+# Also see the $force_name variable.
#
#
-# set pop_last=no
+# set score=yes
#
-# Name: pop_last
+# Name: score
# Type: boolean
-# Default: no
+# Default: yes
#
#
-# If this variable is set, mutt will try to use the ``LAST'' POP command
-# for retrieving only unread messages from the POP server when using
-# the <fetch-mail> function.
+# When this variable is unset, scoring is turned off. This can
+# be useful to selectively disable scoring for certain folders when the
+# $score_threshold_delete variable and related are used.
#
#
-# set pop_reconnect=ask-yes
+# set score_threshold_delete=-1
#
-# Name: pop_reconnect
-# Type: quadoption
-# Default: ask-yes
+# Name: score_threshold_delete
+# Type: number
+# Default: -1
#
#
-# Controls whether or not Mutt will try to reconnect to the POP server if
-# the connection is lost.
+# Messages which have been assigned a score equal to or lower than the value
+# of this variable are automatically marked for deletion by mutt. Since
+# mutt scores are always greater than or equal to zero, the default setting
+# of this variable will never mark a message for deletion.
#
#
-# set pop_user=""
+# set score_threshold_flag=9999
#
-# Name: pop_user
-# Type: string
-# Default: ""
-#
+# Name: score_threshold_flag
+# Type: number
+# Default: 9999
#
-# Your login name on the POP server.
#
-# This variable defaults to your user name on the local machine.
+# Messages which have been assigned a score greater than or equal to this
+# variable's value are automatically marked "flagged".
#
#
-# set pop_pass=""
+# set score_threshold_read=-1
#
-# Name: pop_pass
-# Type: string
-# Default: ""
-#
+# Name: score_threshold_read
+# Type: number
+# Default: -1
#
-# Specifies the password for your POP account. If unset, Mutt will
-# prompt you for your password when you open a POP mailbox.
#
-# Warning: you should only use this option when you are on a
-# fairly secure machine, because the superuser can read your muttrc
-# even if you are the only one who can read the file.
+# Messages which have been assigned a score equal to or lower than the value
+# of this variable are automatically marked as read by mutt. Since
+# mutt scores are always greater than or equal to zero, the default setting
+# of this variable will never mark a message read.
#
#
-# set post_indent_string=""
+# set search_context=0
#
-# Name: post_indent_string
-# Type: string
-# Default: ""
+# Name: search_context
+# Type: number
+# Default: 0
#
#
-# Similar to the $attribution variable, Mutt will append this
-# string after the inclusion of a message which is being replied to.
+# For the pager, this variable specifies the number of lines shown
+# before search results. By default, search results will be top-aligned.
#
#
-# set postpone=ask-yes
+# set send_charset="us-ascii:iso-8859-1:utf-8"
#
-# Name: postpone
-# Type: quadoption
-# Default: ask-yes
+# Name: send_charset
+# Type: string
+# Default: "us-ascii:iso-8859-1:utf-8"
#
#
-# Controls whether or not messages are saved in the $postponed
-# mailbox when you elect not to send immediately.
+# A colon-delimited list of character sets for outgoing messages. Mutt will use the
+# first character set into which the text can be converted exactly.
+# If your $charset is not ``iso-8859-1'' and recipients may not
+# understand ``UTF-8'', it is advisable to include in the list an
+# appropriate widely used standard character set (such as
+# ``iso-8859-2'', ``koi8-r'' or ``iso-2022-jp'') either instead of or after
+# ``iso-8859-1''.
#
-# Also see the $recall variable.
+# In case the text cannot be converted into one of these exactly,
+# mutt uses $charset as a fallback.
#
#
-# set postponed="~/postponed"
+# set sendmail="/usr/sbin/sendmail -oem -oi"
#
-# Name: postponed
+# Name: sendmail
# Type: path
-# Default: "~/postponed"
+# Default: "/usr/sbin/sendmail -oem -oi"
#
#
-# Mutt allows you to indefinitely ``postpone sending a message'' which
-# you are editing. When you choose to postpone a message, Mutt saves it
-# in the mailbox specified by this variable.
-#
-# Also see the $postpone variable.
+# Specifies the program and arguments used to deliver mail sent by Mutt.
+# Mutt expects that the specified program interprets additional
+# arguments as recipient addresses.
#
#
-# set preconnect=""
+# set sendmail_wait=0
#
-# Name: preconnect
-# Type: string
-# Default: ""
-#
-#
-# If set, a shell command to be executed if mutt fails to establish
-# a connection to the server. This is useful for setting up secure
-# connections, e.g. with ssh(1). If the command returns a nonzero
-# status, mutt gives up opening the server. Example:
-# set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net \
-# sleep 20 < /dev/null > /dev/null"
-#
-# Mailbox ``foo'' on ``mailhost.net'' can now be reached
-# as ``{localhost:1234}foo''.
+# Name: sendmail_wait
+# Type: number
+# Default: 0
#
-# Note: For this example to work, you must be able to log in to the
-# remote machine without having to enter a password.
#
+# Specifies the number of seconds to wait for the $sendmail process
+# to finish before giving up and putting delivery in the background.
#
-# set print=ask-no
-#
-# Name: print
-# Type: quadoption
-# Default: ask-no
+# Mutt interprets the value of this variable as follows:
+# >0 number of seconds to wait for sendmail to finish before continuing
+# 0 wait forever for sendmail to finish
+# <0 always put sendmail in the background without waiting
#
#
-# Controls whether or not Mutt really prints messages.
-# This is set to ``ask-no'' by default, because some people
-# accidentally hit ``p'' often.
+# Note that if you specify a value other than 0, the output of the child
+# process will be put in a temporary file. If there is some error, you
+# will be informed as to where to find the output.
#
#
-# set print_command="lpr"
+# set shell=""
#
-# Name: print_command
+# Name: shell
# Type: path
-# Default: "lpr"
+# Default: ""
#
#
-# This specifies the command pipe that should be used to print messages.
+# Command to use when spawning a subshell. By default, the user's login
+# shell from /etc/passwd is used.
#
#
-# set print_decode=yes
+# set sig_dashes=yes
#
-# Name: print_decode
+# Name: sig_dashes
# Type: boolean
# Default: yes
#
#
-# Used in connection with the <print-message> command. If this
-# option is set, the message is decoded before it is passed to the
-# external command specified by $print_command. If this option
-# is unset, no processing will be applied to the message when
-# printing it. The latter setting may be useful if you are using
-# some advanced printer filter which is able to properly format
-# e-mail messages for printing.
+# If set, a line containing ``-- '' (note the trailing space) will be inserted before your
+# $signature. It is strongly recommended that you not unset
+# this variable unless your signature contains just your name. The
+# reason for this is because many software packages use ``-- \n'' to
+# detect your signature. For example, Mutt has the ability to highlight
+# the signature in a different color in the builtin pager.
#
#
-# set print_split=no
+# set sig_on_top=no
#
-# Name: print_split
+# Name: sig_on_top
# Type: boolean
# Default: no
#
#
-# Used in connection with the <print-message> command. If this option
-# is set, the command specified by $print_command is executed once for
-# each message which is to be printed. If this option is unset,
-# the command specified by $print_command is executed only once, and
-# all the messages are concatenated, with a form feed as the message
-# separator.
-#
-# Those who use the enscript(1) program's mail-printing mode will
-# most likely want to set this option.
-#
-#
-# set prompt_after=yes
-#
-# Name: prompt_after
-# Type: boolean
-# Default: yes
-#
-#
-# If you use an external $pager, setting this variable will
-# cause Mutt to prompt you for a command when the pager exits rather
-# than returning to the index menu. If unset, Mutt will return to the
-# index menu when the external pager exits.
+# If set, the signature will be included before any quoted or forwarded
+# text. It is strongly recommended that you do not set this variable
+# unless you really know what you are doing, and are prepared to take
+# some heat from netiquette guardians.
#
#
-# set query_command=""
+# set signature="~/.signature"
#
-# Name: query_command
+# Name: signature
# Type: path
-# Default: ""
+# Default: "~/.signature"
#
#
-# This specifies the command that mutt will use to make external address
-# queries. The string should contain a ``%s'', which will be substituted
-# with the query string the user types. See ``query'' for more
-# information.
+# Specifies the filename of your signature, which is appended to all
+# outgoing messages. If the filename ends with a pipe (``|''), it is
+# assumed that filename is a shell command and input should be read from
+# its standard output.
#
#
-# set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?"
+# set simple_search="~f %s | ~s %s"
#
-# Name: query_format
+# Name: simple_search
# Type: string
-# Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?"
-#
-#
-# This variable describes the format of the ``query'' menu. The
-# following printf(3)-style sequences are understood:
-# %a destination address
-# %c current entry number
-# %e extra information *
-# %n destination name
-# %t ``*'' if current entry is tagged, a space otherwise
-# %>X right justify the rest of the string and pad with ``X''
-# %|X pad to the end of the line with ``X''
-# %*X soft-fill with character ``X'' as pad
+# Default: "~f %s | ~s %s"
#
#
-# For an explanation of ``soft-fill'', see the $index_format documentation.
+# Specifies how Mutt should expand a simple search into a real search
+# pattern. A simple search is one that does not contain any of the ``~'' pattern
+# operators. See ``patterns'' for more information on search patterns.
#
-# * = can be optionally printed if nonzero, see the $status_format documentation.
+# For example, if you simply type ``joe'' at a search or limit prompt, Mutt
+# will automatically expand it to the value specified by this variable by
+# replacing ``%s'' with the supplied string.
+# For the default value, ``joe'' would be expanded to: ``~f joe | ~s joe''.
#
#
-# set quit=yes
+# set sleep_time=1
#
-# Name: quit
-# Type: quadoption
-# Default: yes
+# Name: sleep_time
+# Type: number
+# Default: 1
#
#
-# This variable controls whether ``quit'' and ``exit'' actually quit
-# from mutt. If this option is set, they do quit, if it is unset, they
-# have no effect, and if it is set to ask-yes or ask-no, you are
-# prompted for confirmation when you try to quit.
+# Specifies time, in seconds, to pause while displaying certain informational
+# messages, while moving from folder to folder and after expunging
+# messages from the current folder. The default is to pause one second, so
+# a value of zero for this option suppresses the pause.
#
#
-# set quote_regexp="^([ \t]*[|>:}#])+"
+# set smart_wrap=yes
#
-# Name: quote_regexp
-# Type: regular expression
-# Default: "^([ \t]*[|>:}#])+"
-#
-#
-# A regular expression used in the internal pager to determine quoted
-# sections of text in the body of a message. Quoted text may be filtered
-# out using the <toggle-quoted> command, or colored according to the
-# ``color quoted'' family of directives.
+# Name: smart_wrap
+# Type: boolean
+# Default: yes
#
-# Higher levels of quoting may be colored differently (``color quoted1'',
-# ``color quoted2'', etc.). The quoting level is determined by removing
-# the last character from the matched text and recursively reapplying
-# the regular expression until it fails to produce a match.
#
-# Match detection may be overridden by the $smileys regular expression.
+# Controls the display of lines longer than the screen width in the
+# internal pager. If set, long lines are wrapped at a word boundary. If
+# unset, lines are simply wrapped at the screen edge. Also see the
+# $markers variable.
#
#
-# set read_inc=10
+# set smileys="(>From )|(:[-^]?[][)(><}{|/DP])"
#
-# Name: read_inc
-# Type: number
-# Default: 10
-#
+# Name: smileys
+# Type: regular expression
+# Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
#
-# If set to a value greater than 0, Mutt will display which message it
-# is currently on when reading a mailbox or when performing search actions
-# such as search and limit. The message is printed after
-# this many messages have been read or searched (e.g., if set to 25, Mutt will
-# print a message when it is at message 25, and then again when it gets
-# to message 50). This variable is meant to indicate progress when
-# reading or searching large mailboxes which may take some time.
-# When set to 0, only a single message will appear before the reading
-# the mailbox.
#
-# Also see the $write_inc, $net_inc and $time_inc variables and the
-# ``tuning'' section of the manual for performance considerations.
+# The pager uses this variable to catch some common false
+# positives of $quote_regexp, most notably smileys and not consider
+# a line quoted text if it also matches $smileys. This mostly
+# happens at the beginning of a line.
#
#
-# set read_only=no
+# set smime_ask_cert_label=yes
#
-# Name: read_only
+# Name: smime_ask_cert_label
# Type: boolean
-# Default: no
+# Default: yes
#
#
-# If set, all folders are opened in read-only mode.
+# This flag controls whether you want to be asked to enter a label
+# for a certificate about to be added to the database or not. It is
+# set by default.
+# (S/MIME only)
#
#
-# set realname=""
+# set smime_ca_location=""
#
-# Name: realname
-# Type: string
+# Name: smime_ca_location
+# Type: path
# Default: ""
#
#
-# This variable specifies what ``real'' or ``personal'' name should be used
-# when sending messages.
-#
-# By default, this is the GECOS field from /etc/passwd. Note that this
-# variable will not be used when the user has set a real name
-# in the $from variable.
+# This variable contains the name of either a directory, or a file which
+# contains trusted certificates for use with OpenSSL.
+# (S/MIME only)
#
#
-# set recall=ask-yes
+# set smime_certificates=""
#
-# Name: recall
-# Type: quadoption
-# Default: ask-yes
+# Name: smime_certificates
+# Type: path
+# Default: ""
#
#
-# Controls whether or not Mutt recalls postponed messages
-# when composing a new message.
+# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
+# storage and retrieval of keys by itself. This is very basic right
+# now, and keys and certificates are stored in two different
+# directories, both named as the hash-value retrieved from
+# OpenSSL. There is an index file which contains mailbox-address
+# keyid pairs, and which can be manually edited. This option points to
+# the location of the certificates.
+# (S/MIME only)
#
-# Setting this variable to is not generally useful, and thus not
-# recommended.
#
-# Also see $postponed variable.
+# set smime_decrypt_command=""
+#
+# Name: smime_decrypt_command
+# Type: string
+# Default: ""
#
#
-# set record="~/sent"
-#
-# Name: record
-# Type: path
-# Default: "~/sent"
-#
-#
-# This specifies the file into which your outgoing messages should be
-# appended. (This is meant as the primary method for saving a copy of
-# your messages, but another way to do this is using the ``my_hdr''
-# command to create a ``Bcc:'' field with your email address in it.)
-#
-# The value of $record is overridden by the $force_name and
-# $save_name variables, and the ``fcc-hook'' command.
-#
-#
-# set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*"
-#
-# Name: reply_regexp
-# Type: regular expression
-# Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*"
-#
-#
-# A regular expression used to recognize reply messages when threading
-# and replying. The default value corresponds to the English "Re:" and
-# the German "Aw:".
-#
-#
-# set reply_self=no
-#
-# Name: reply_self
-# Type: boolean
-# Default: no
-#
-#
-# If unset and you are replying to a message sent by you, Mutt will
-# assume that you want to reply to the recipients of that message rather
-# than to yourself.
-#
-# Also see the ``alternates'' command.
-#
-#
-# set reply_to=ask-yes
-#
-# Name: reply_to
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# If set, when replying to a message, Mutt will use the address listed
-# in the Reply-to: header as the recipient of the reply. If unset,
-# it will use the address in the From: header field instead. This
-# option is useful for reading a mailing list that sets the Reply-To:
-# header field to the list address and you want to send a private
-# message to the author of a message.
-#
-#
-# set resolve=yes
-#
-# Name: resolve
-# Type: boolean
-# Default: yes
-#
-#
-# When set, the cursor will be automatically advanced to the next
-# (possibly undeleted) message whenever a command that modifies the
-# current message is executed.
-#
-#
-# set reverse_alias=no
-#
-# Name: reverse_alias
-# Type: boolean
-# Default: no
-#
-#
-# This variable controls whether or not Mutt will display the ``personal''
-# name from your aliases in the index menu if it finds an alias that
-# matches the message's sender. For example, if you have the following
-# alias:
-# alias juser abd30425@somewhere.net (Joe User)
-#
-# and then you receive mail which contains the following header:
-# From: abd30425@somewhere.net
-#
-# It would be displayed in the index menu as ``Joe User'' instead of
-# ``abd30425@somewhere.net.'' This is useful when the person's e-mail
-# address is not human friendly.
-#
-#
-# set reverse_name=no
-#
-# Name: reverse_name
-# Type: boolean
-# Default: no
+# This format string specifies a command which is used to decrypt
+# application/x-pkcs7-mime attachments.
#
+# The OpenSSL command formats have their own set of printf(3)-like sequences
+# similar to PGP's:
+# %f Expands to the name of a file containing a message.
+# %s Expands to the name of a file containing the signature part
+# of a multipart/signed attachment when verifying it.
+# %k The key-pair specified with $smime_default_key
+# %c One or more certificate IDs.
+# %a The algorithm used for encryption.
+# %C CA location: Depending on whether $smime_ca_location
+# points to a directory or file, this expands to
+# ``-CApath $smime_ca_location'' or ``-CAfile $smime_ca_location''.
#
-# It may sometimes arrive that you receive mail to a certain machine,
-# move the messages to another machine, and reply to some the messages
-# from there. If this variable is set, the default From: line of
-# the reply messages is built using the address where you received the
-# messages you are replying to if that address matches your
-# ``alternates''. If the variable is unset, or the address that would be
-# used doesn't match your ``alternates'', the From: line will use
-# your address on the current machine.
#
-# Also see the ``alternates'' command.
+# For examples on how to configure these formats, see the smime.rc in
+# the samples/ subdirectory which has been installed on your system
+# alongside the documentation.
+# (S/MIME only)
#
#
-# set reverse_realname=yes
+# set smime_decrypt_use_default_key=yes
#
-# Name: reverse_realname
+# Name: smime_decrypt_use_default_key
# Type: boolean
# Default: yes
#
#
-# This variable fine-tunes the behaviour of the $reverse_name feature.
-# When it is set, mutt will use the address from incoming messages as-is,
-# possibly including eventual real names. When it is unset, mutt will
-# override any such real names with the setting of the $realname variable.
-#
-#
-# set rfc2047_parameters=no
-#
-# Name: rfc2047_parameters
-# Type: boolean
-# Default: no
-#
-#
-# When this variable is set, Mutt will decode RFC2047-encoded MIME
-# parameters. You want to set this variable when mutt suggests you
-# to save attachments to files named like:
-# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
-#
-# When this variable is set interactively, the change won't be
-# active until you change folders.
-#
-# Note that this use of RFC2047's encoding is explicitly
-# prohibited by the standard, but nevertheless encountered in the
-# wild.
-#
-# Also note that setting this parameter will not have the effect
-# that mutt generates this kind of encoding. Instead, mutt will
-# unconditionally use the encoding specified in RFC2231.
+# If set (default) this tells mutt to use the default key for decryption. Otherwise,
+# if managing multiple certificate-key-pairs, mutt will try to use the mailbox-address
+# to determine the key to use. It will ask you to supply a key, if it can't find one.
+# (S/MIME only)
#
#
-# set save_address=no
+# set smime_default_key=""
#
-# Name: save_address
-# Type: boolean
-# Default: no
+# Name: smime_default_key
+# Type: string
+# Default: ""
#
#
-# If set, mutt will take the sender's full address when choosing a
-# default folder for saving a mail. If $save_name or $force_name
-# is set too, the selection of the Fcc folder will be changed as well.
+# This is the default key-pair to use for signing. This must be set to the
+# keyid (the hash-value that OpenSSL generates) to work properly
+# (S/MIME only)
#
#
-# set save_empty=yes
+# set smime_encrypt_command=""
#
-# Name: save_empty
-# Type: boolean
-# Default: yes
+# Name: smime_encrypt_command
+# Type: string
+# Default: ""
#
#
-# When unset, mailboxes which contain no saved messages will be removed
-# when closed (the exception is $spoolfile which is never removed).
-# If set, mailboxes are never removed.
+# This command is used to create encrypted S/MIME messages.
#
-# Note: This only applies to mbox and MMDF folders, Mutt does not
-# delete MH and Maildir directories.
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
#
-# set save_history=0
+# set smime_encrypt_with=""
#
-# Name: save_history
-# Type: number
-# Default: 0
+# Name: smime_encrypt_with
+# Type: string
+# Default: ""
#
#
-# This variable controls the size of the history (per category) saved in the
-# $history_file file.
+# This sets the algorithm that should be used for encryption.
+# Valid choices are ``des'', ``des3'', ``rc2-40'', ``rc2-64'', ``rc2-128''.
+# If unset, ``3des'' (TripleDES) is used.
+# (S/MIME only)
#
#
-# set save_name=no
+# set smime_get_cert_command=""
#
-# Name: save_name
-# Type: boolean
-# Default: no
+# Name: smime_get_cert_command
+# Type: string
+# Default: ""
#
#
-# This variable controls how copies of outgoing messages are saved.
-# When set, a check is made to see if a mailbox specified by the
-# recipient address exists (this is done by searching for a mailbox in
-# the $folder directory with the username part of the
-# recipient address). If the mailbox exists, the outgoing message will
-# be saved to that mailbox, otherwise the message is saved to the
-# $record mailbox.
+# This command is used to extract X509 certificates from a PKCS7 structure.
#
-# Also see the $force_name variable.
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
#
-# set score=yes
+# set smime_get_cert_email_command=""
#
-# Name: score
-# Type: boolean
-# Default: yes
-#
-#
-# When this variable is unset, scoring is turned off. This can
-# be useful to selectively disable scoring for certain folders when the
-# $score_threshold_delete variable and related are used.
-#
+# Name: smime_get_cert_email_command
+# Type: string
+# Default: ""
#
-# set score_threshold_delete=-1
-#
-# Name: score_threshold_delete
-# Type: number
-# Default: -1
#
+# This command is used to extract the mail address(es) used for storing
+# X509 certificates, and for verification purposes (to check whether the
+# certificate was issued for the sender's mailbox).
#
-# Messages which have been assigned a score equal to or lower than the value
-# of this variable are automatically marked for deletion by mutt. Since
-# mutt scores are always greater than or equal to zero, the default setting
-# of this variable will never mark a message for deletion.
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
#
-# set score_threshold_flag=9999
+# set smime_get_signer_cert_command=""
#
-# Name: score_threshold_flag
-# Type: number
-# Default: 9999
-#
-#
-# Messages which have been assigned a score greater than or equal to this
-# variable's value are automatically marked "flagged".
-#
+# Name: smime_get_signer_cert_command
+# Type: string
+# Default: ""
#
-# set score_threshold_read=-1
-#
-# Name: score_threshold_read
-# Type: number
-# Default: -1
#
+# This command is used to extract only the signers X509 certificate from a S/MIME
+# signature, so that the certificate's owner may get compared to the
+# email's ``From:'' field.
#
-# Messages which have been assigned a score equal to or lower than the value
-# of this variable are automatically marked as read by mutt. Since
-# mutt scores are always greater than or equal to zero, the default setting
-# of this variable will never mark a message read.
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
#
-# set send_charset="us-ascii:iso-8859-1:utf-8"
+# set smime_import_cert_command=""
#
-# Name: send_charset
+# Name: smime_import_cert_command
# Type: string
-# Default: "us-ascii:iso-8859-1:utf-8"
-#
-#
-# A colon-delimited list of character sets for outgoing messages. Mutt will use the
-# first character set into which the text can be converted exactly.
-# If your $charset is not ``iso-8859-1'' and recipients may not
-# understand ``UTF-8'', it is advisable to include in the list an
-# appropriate widely used standard character set (such as
-# ``iso-8859-2'', ``koi8-r'' or ``iso-2022-jp'') either instead of or after
-# ``iso-8859-1''.
-#
-# In case the text cannot be converted into one of these exactly,
-# mutt uses $charset as a fallback.
+# Default: ""
#
#
-# set sendmail="/usr/sbin/sendmail -oem -oi"
-#
-# Name: sendmail
-# Type: path
-# Default: "/usr/sbin/sendmail -oem -oi"
-#
+# This command is used to import a certificate via smime_keys.
#
-# Specifies the program and arguments used to deliver mail sent by Mutt.
-# Mutt expects that the specified program interprets additional
-# arguments as recipient addresses.
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
#
-# set sendmail_wait=0
+# set smime_is_default=no
#
-# Name: sendmail_wait
-# Type: number
-# Default: 0
-#
-#
-# Specifies the number of seconds to wait for the $sendmail process
-# to finish before giving up and putting delivery in the background.
-#
-# Mutt interprets the value of this variable as follows:
-# >0 number of seconds to wait for sendmail to finish before continuing
-# 0 wait forever for sendmail to finish
-# <0 always put sendmail in the background without waiting
+# Name: smime_is_default
+# Type: boolean
+# Default: no
#
#
-# Note that if you specify a value other than 0, the output of the child
-# process will be put in a temporary file. If there is some error, you
-# will be informed as to where to find the output.
+# The default behaviour of mutt is to use PGP on all auto-sign/encryption
+# operations. To override and to use OpenSSL instead this must be set.
+# However, this has no effect while replying, since mutt will automatically
+# select the same application that was used to sign/encrypt the original
+# message. (Note that this variable can be overridden by unsetting $crypt_autosmime.)
+# (S/MIME only)
#
#
-# set shell=""
+# set smime_keys=""
#
-# Name: shell
+# Name: smime_keys
# Type: path
# Default: ""
#
#
-# Command to use when spawning a subshell. By default, the user's login
-# shell from /etc/passwd is used.
+# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
+# storage and retrieval of keys/certs by itself. This is very basic right now,
+# and stores keys and certificates in two different directories, both
+# named as the hash-value retrieved from OpenSSL. There is an index file
+# which contains mailbox-address keyid pair, and which can be manually
+# edited. This option points to the location of the private keys.
+# (S/MIME only)
#
#
-# set sig_dashes=yes
+# set smime_pk7out_command=""
#
-# Name: sig_dashes
-# Type: boolean
-# Default: yes
-#
-#
-# If set, a line containing ``-- '' (note the trailing space) will be inserted before your
-# $signature. It is strongly recommended that you not unset
-# this variable unless your signature contains just your name. The
-# reason for this is because many software packages use ``-- \n'' to
-# detect your signature. For example, Mutt has the ability to highlight
-# the signature in a different color in the builtin pager.
+# Name: smime_pk7out_command
+# Type: string
+# Default: ""
#
#
-# set sig_on_top=no
-#
-# Name: sig_on_top
-# Type: boolean
-# Default: no
-#
+# This command is used to extract PKCS7 structures of S/MIME signatures,
+# in order to extract the public X509 certificate(s).
#
-# If set, the signature will be included before any quoted or forwarded
-# text. It is strongly recommended that you do not set this variable
-# unless you really know what you are doing, and are prepared to take
-# some heat from netiquette guardians.
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
#
-# set signature="~/.signature"
+# set smime_sign_command=""
#
-# Name: signature
-# Type: path
-# Default: "~/.signature"
+# Name: smime_sign_command
+# Type: string
+# Default: ""
#
#
-# Specifies the filename of your signature, which is appended to all
-# outgoing messages. If the filename ends with a pipe (``|''), it is
-# assumed that filename is a shell command and input should be read from
-# its standard output.
+# This command is used to created S/MIME signatures of type
+# multipart/signed, which can be read by all mail clients.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
#
-# set simple_search="~f %s | ~s %s"
+# set smime_sign_opaque_command=""
#
-# Name: simple_search
+# Name: smime_sign_opaque_command
# Type: string
-# Default: "~f %s | ~s %s"
+# Default: ""
#
#
-# Specifies how Mutt should expand a simple search into a real search
-# pattern. A simple search is one that does not contain any of the ``~'' pattern
-# operators. See ``patterns'' for more information on search patterns.
+# This command is used to created S/MIME signatures of type
+# application/x-pkcs7-signature, which can only be handled by mail
+# clients supporting the S/MIME extension.
#
-# For example, if you simply type ``joe'' at a search or limit prompt, Mutt
-# will automatically expand it to the value specified by this variable by
-# replacing ``%s'' with the supplied string.
-# For the default value, ``joe'' would be expanded to: ``~f joe | ~s joe''.
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
#
-# set smart_wrap=yes
+# set smime_timeout=300
#
-# Name: smart_wrap
-# Type: boolean
-# Default: yes
+# Name: smime_timeout
+# Type: number
+# Default: 300
#
#
-# Controls the display of lines longer than the screen width in the
-# internal pager. If set, long lines are wrapped at a word boundary. If
-# unset, lines are simply wrapped at the screen edge. Also see the
-# $markers variable.
+# The number of seconds after which a cached passphrase will expire if
+# not used.
+# (S/MIME only)
#
#
-# set smileys="(>From )|(:[-^]?[][)(><}{|/DP])"
+# set smime_verify_command=""
#
-# Name: smileys
-# Type: regular expression
-# Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
+# Name: smime_verify_command
+# Type: string
+# Default: ""
#
#
-# The pager uses this variable to catch some common false
-# positives of $quote_regexp, most notably smileys and not consider
-# a line quoted text if it also matches $smileys. This mostly
-# happens at the beginning of a line.
+# This command is used to verify S/MIME signatures of type multipart/signed.
#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
-# set sleep_time=1
+#
+# set smime_verify_opaque_command=""
#
-# Name: sleep_time
-# Type: number
-# Default: 1
+# Name: smime_verify_opaque_command
+# Type: string
+# Default: ""
#
#
-# Specifies time, in seconds, to pause while displaying certain informational
-# messages, while moving from folder to folder and after expunging
-# messages from the current folder. The default is to pause one second, so
-# a value of zero for this option suppresses the pause.
+# This command is used to verify S/MIME signatures of type
+# application/x-pkcs7-mime.
+#
+# This is a format string, see the $smime_decrypt_command command for
+# possible printf(3)-like sequences.
+# (S/MIME only)
#
#
# set smtp_authenticators=""
# delivery. This should take the form of an SMTP URL, eg:
# smtp[s]://[user[:pass]@]host[:port]/
#
-# ... where ``[...]'' denotes an optional part.
+# where ``[...]'' denotes an optional part.
# Setting this variable overrides the value of the $sendmail
# variable.
#
#
# If your spool mailbox is in a non-default place where Mutt cannot find
# it, you can specify its location with this variable. Mutt will
-# automatically set this variable to the value of the environment
-# variable $MAIL if it is not set.
+# initially set this variable to the value of the environment
+# variable $MAIL or $MAILDIR if either is defined.
+#
+#
+# set ssl_ca_certificates_file=""
+#
+# Name: ssl_ca_certificates_file
+# Type: path
+# Default: ""
+#
+#
+# This variable specifies a file containing trusted CA certificates.
+# Any server certificate that is signed with one of these CA
+# certificates is also automatically accepted.
+#
+# Example:
+# set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
+#
+#
+# set ssl_client_cert=""
+#
+# Name: ssl_client_cert
+# Type: path
+# Default: ""
+#
+#
+# The file containing a client certificate and its associated private
+# key.
+#
+#
+# set ssl_force_tls=no
+#
+# Name: ssl_force_tls
+# Type: boolean
+# Default: no
+#
+#
+# If this variable is set, Mutt will require that all connections
+# to remote servers be encrypted. Furthermore it will attempt to
+# negotiate TLS even if the server does not advertise the capability,
+# since it would otherwise have to abort the connection anyway. This
+# option supersedes $ssl_starttls.
+#
+#
+# set ssl_min_dh_prime_bits=0
+#
+# Name: ssl_min_dh_prime_bits
+# Type: number
+# Default: 0
+#
+#
+# This variable specifies the minimum acceptable prime size (in bits)
+# for use in any Diffie-Hellman key exchange. A value of 0 will use
+# the default from the GNUTLS library.
+#
+#
+# set ssl_starttls=yes
+#
+# Name: ssl_starttls
+# Type: quadoption
+# Default: yes
+#
+#
+# If set (the default), mutt will attempt to use STARTTLS on servers
+# advertising the capability. When unset, mutt will not attempt to
+# use STARTTLS regardless of the server's capabilities.
+#
+#
+# set ssl_use_sslv2=no
+#
+# Name: ssl_use_sslv2
+# Type: boolean
+# Default: no
+#
+#
+# This variable specifies whether to attempt to use SSLv2 in the
+# SSL authentication process.
+#
+#
+# set ssl_use_sslv3=yes
+#
+# Name: ssl_use_sslv3
+# Type: boolean
+# Default: yes
+#
+#
+# This variable specifies whether to attempt to use SSLv3 in the
+# SSL authentication process.
+#
+#
+# set ssl_use_tlsv1=yes
+#
+# Name: ssl_use_tlsv1
+# Type: boolean
+# Default: yes
+#
+#
+# This variable specifies whether to attempt to use TLSv1 in the
+# SSL authentication process.
+#
+#
+# set ssl_usesystemcerts=yes
+#
+# Name: ssl_usesystemcerts
+# Type: boolean
+# Default: yes
+#
+#
+# If set to yes, mutt will use CA certificates in the
+# system-wide certificate store when checking if a server certificate
+# is signed by a trusted CA.
+#
+#
+# set ssl_verify_dates=yes
+#
+# Name: ssl_verify_dates
+# Type: boolean
+# Default: yes
+#
+#
+# If set (the default), mutt will not automatically accept a server
+# certificate that is either not yet valid or already expired. You should
+# only unset this for particular known hosts, using the
+# <account-hook> function.
+#
+#
+# set ssl_verify_host=yes
+#
+# Name: ssl_verify_host
+# Type: boolean
+# Default: yes
+#
+#
+# If set (the default), mutt will not automatically accept a server
+# certificate whose host name does not match the host used in your folder
+# URL. You should only unset this for particular known hosts, using
+# the <account-hook> function.
#
#
# set status_chars="-*%A"
# Note that $indent_string is ignored when this option is set.
#
#
-# set thread_received=no
-#
-# Name: thread_received
-# Type: boolean
-# Default: no
-#
-#
-# When set, mutt uses the date received rather than the date sent
-# to thread messages by subject.
-#
-#
# set thorough_search=no
#
# Name: thorough_search
# headers) which may lead to incorrect search results.
#
#
+# set thread_received=no
+#
+# Name: thread_received
+# Type: boolean
+# Default: no
+#
+#
+# When set, mutt uses the date received rather than the date sent
+# to thread messages by subject.
+#
+#
# set tilde=no
#
# Name: tilde
# Note: For this example to work you must be able to log in to the remote
# machine without having to enter a password.
#
+# When set, Mutt uses the tunnel for all remote connections.
+# Please see ``account-hook'' in the manual for how to use different
+# tunnel commands per connection.
+#
+#
+# set uncollapse_jump=no
+#
+# Name: uncollapse_jump
+# Type: boolean
+# Default: no
+#
+#
+# When set, Mutt will jump to the next unread message, if any,
+# when the current thread is uncollapsed.
+#
#
# set use_8bitmime=no
#
# (DEPRECATED) Equivalent to setting $wrap with a negative value.
#
#
+# set write_bcc=yes
+#
+# Name: write_bcc
+# Type: boolean
+# Default: yes
+#
+#
+# Controls whether mutt writes out the ``Bcc:'' header when preparing
+# messages to be sent. Exim users may wish to unset this. If mutt
+# is set to deliver directly via SMTP (see $smtp_url), this
+# option does nothing: mutt will never write out the ``Bcc:'' header
+# in this case.
+#
+#
# set write_inc=10
#
# Name: write_inc
# ``tuning'' section of the manual for performance considerations.
#
#
-# set write_bcc=yes
-#
-# Name: write_bcc
-# Type: boolean
-# Default: yes
-#
-#
-# Controls whether mutt writes out the ``Bcc:'' header when preparing
-# messages to be sent. Exim users may wish to unset this. If mutt
-# is set to deliver directly via SMTP (see $smtp_url), this
-# option does nothing: mutt will never write out the ``Bcc:'' header
-# in this case.
-#
-#
projects / software / mutt-debian.git / blobdiff