X-Git-Url: https://git.llucax.com/software/mutt-debian.git/blobdiff_plain/647ac5444d022537a1f0854dd309494c511dfe07..939639fcf1dad1b8f3a85d641f41d11c49281f3c:/doc/Muttrc?ds=inline diff --git a/doc/Muttrc b/doc/Muttrc index 40ac02c..4ccb643 100644 --- a/doc/Muttrc +++ b/doc/Muttrc @@ -87,7 +87,7 @@ attachments +I text/plain ## line is unnecessary if you already have "attach-allow */.*", of ## course. These are off by default! The MIME elements contained ## within a message/* or multipart/* are still examined, even if the -## containers themseves don't qualify. +## containers themselves don't qualify. ## #attachments +A message/.* multipart/.* #attachments +I message/.* multipart/.* @@ -479,7 +479,7 @@ attachments -I message/external-body # Upon startup Mutt tries to derive this value from environment variables # such as $LC_CTYPE or $LANG. # -# Note: It should only be set in case Mutt isn't abled to determine the +# Note: It should only be set in case Mutt isn't able to determine the # character set used correctly. # # @@ -778,7 +778,7 @@ attachments -I message/external-body # # If ``yes'', always attempt to verify PGP or S/MIME signatures. # If ``ask-*'', ask whether or not to verify the signature. -# If \Fi``no'', never attempt to verify cryptographic signatures. +# If ``no'', never attempt to verify cryptographic signatures. # (Crypto only) # # @@ -901,7 +901,7 @@ attachments -I message/external-body # Note: when using $sendmail for delivery, you should not enable # this unless you are either using Sendmail 8.8.x or greater or a MTA # providing a sendmail(1)-compatible interface supporting the -N option -# for DSN. For SMTP delivery, DSN support is autodetected so that it +# for DSN. For SMTP delivery, DSN support is auto-detected so that it # depends on the server whether DSN will be used or not. # # @@ -922,7 +922,7 @@ attachments -I message/external-body # Note: when using $sendmail for delivery, you should not enable # this unless you are either using Sendmail 8.8.x or greater or a MTA # providing a sendmail(1)-compatible interface supporting the -R option -# for DSN. For SMTP delivery, DSN support is autodetected so that it +# for DSN. For SMTP delivery, DSN support is auto-detected so that it # depends on the server whether DSN will be used or not. # # @@ -1008,7 +1008,7 @@ attachments -I message/external-body # Default: "~" # # -# Escape character to use for functions in the builtin editor. +# Escape character to use for functions in the built-in editor. # # # set fast_reply=no @@ -1077,6 +1077,7 @@ attachments -I message/external-body # its own set of printf(3)-like sequences: # %C current file number # %d date/time folder was last modified +# %D date/time folder was last modified using $date_format. # %f filename (``/'' is appended to directory names, # ``@'' to symbolic links and ``*'' to executable # files) @@ -1283,7 +1284,7 @@ attachments -I message/external-body # When mutt is compiled with qdbm or tokyocabinet as header cache backend, # this option determines whether the database will be compressed. # Compression results in database files roughly being one fifth -# of the usual diskspace, but the uncompression can result in a +# of the usual diskspace, but the decompression can result in a # slower opening of cached folder(s) which in general is still # much faster than opening non header cached folders. # @@ -1480,7 +1481,7 @@ attachments -I message/external-body # Default: no # # -# Affects the behaviour of the function when replying to +# Affects the behavior of the function when replying to # messages from mailing lists (as defined by the ``subscribe'' or # ``lists'' commands). When set, if the ``Reply-To:'' field is # set to the same value as the ``To:'' field, Mutt assumes that the @@ -1501,7 +1502,7 @@ attachments -I message/external-body # This is a colon-delimited list of authentication methods mutt may # attempt to use to log in to an IMAP server, in the order mutt should # try them. Authentication methods are either ``login'' or the right -# side of an IMAP ``AUTH=xxx'' capability string, eg ``digest-md5'', ``gssapi'' +# side of an IMAP ``AUTH=xxx'' capability string, e.g. ``digest-md5'', ``gssapi'' # or ``cram-md5''. This option is case-insensitive. If it's # unset (the default) mutt will try all available methods, # in order from most-secure to least-secure. @@ -1793,7 +1794,7 @@ attachments -I message/external-body # %O original save folder where mutt would formerly have # stashed the message: list name or recipient name # if not sent to a list -# %P progress indicator for the builtin pager (how much of the file has been displayed) +# %P progress indicator for the built-in pager (how much of the file has been displayed) # %s subject of the message # %S status of the message (``N''/``D''/``d''/``!''/``r''/*) # %t ``To:'' field (recipients) @@ -1879,6 +1880,22 @@ attachments -I message/external-body # new mail. Also see the $timeout variable. # # +# set mail_check_recent=yes +# +# Name: mail_check_recent +# Type: boolean +# Default: yes +# +# +# When set, Mutt will only notify you about new mail that has been received +# since the last time you opened the mailbox. When unset, Mutt will notify you +# if any new mail exists in the mailbox, regardless of whether you have visited it +# recently. +# +# When $mark_old is set, Mutt does not consider the mailbox to contain new +# mail if only old messages exist. +# +# # set mailcap_path="" # # Name: mailcap_path @@ -1991,7 +2008,7 @@ attachments -I message/external-body # # # The default mailbox type used when creating new folders. May be any of -# ``mbox'', ``MMDF'', ``MH'' and ``Maildir''. This is overriden by the +# ``mbox'', ``MMDF'', ``MH'' and ``Maildir''. This is overridden by the # -m command-line option. # # @@ -2108,7 +2125,7 @@ attachments -I message/external-body # Default: no # # -# When unset, mutt will mimic mh's behaviour and rename deleted messages +# When unset, mutt will mimic mh's behavior and rename deleted messages # to , in mh folders instead of really deleting # them. This leaves the message on disk but makes programs reading the folder # ignore it. If the variable is set, the message files will simply be @@ -2262,7 +2279,7 @@ attachments -I message/external-body # # # This variable specifies which pager you would like to use to view -# messages. The value ``builtin'' means to use the builtin pager, otherwise this +# messages. The value ``builtin'' means to use the built-in pager, otherwise this # variable should specify the pathname of the external pager you would # like to use. # @@ -2862,7 +2879,7 @@ attachments -I message/external-body # This is a colon-delimited list of authentication methods mutt may # attempt to use to log in to an POP server, in the order mutt should # try them. Authentication methods are either ``user'', ``apop'' or any -# SASL mechanism, eg ``digest-md5'', ``gssapi'' or ``cram-md5''. +# SASL mechanism, e.g. ``digest-md5'', ``gssapi'' or ``cram-md5''. # This option is case-insensitive. If this option is unset # (the default) mutt will try all available methods, in order from # most-secure to least-secure. @@ -2902,7 +2919,7 @@ attachments -I message/external-body # # # The name of your POP server for the function. You -# can also specify an alternative port, username and password, ie: +# can also specify an alternative port, username and password, i.e.: # [pop[s]://][username[:password]@]popserver[:port] # # where ``[...]'' denotes an optional part. @@ -3093,10 +3110,13 @@ attachments -I message/external-body # Default: "" # # -# This specifies the command that mutt will use to make external address -# queries. The string should contain a ``%s'', which will be substituted -# with the query string the user types. See ``query'' for more -# information. +# This specifies the command Mutt will use to make external address +# queries. The string may contain a ``%s'', which will be substituted +# with the query string the user types. Mutt will add quotes around the +# string substituted for ``%s'' automatically according to shell quoting +# rules, so you should avoid adding your own. If no ``%s'' is found in +# the string, Mutt will append the user's query to the end of the string. +# See ``query'' for more information. # # # set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?" @@ -3334,7 +3354,7 @@ attachments -I message/external-body # Default: yes # # -# This variable fine-tunes the behaviour of the $reverse_name feature. +# This variable fine-tunes the behavior of the $reverse_name feature. # When it is set, mutt will use the address from incoming messages as-is, # possibly including eventual real names. When it is unset, mutt will # override any such real names with the setting of the $realname variable. @@ -3555,7 +3575,7 @@ attachments -I message/external-body # this variable unless your signature contains just your name. The # reason for this is because many software packages use ``-- \n'' to # detect your signature. For example, Mutt has the ability to highlight -# the signature in a different color in the builtin pager. +# the signature in a different color in the built-in pager. # # # set sig_on_top=no @@ -3830,7 +3850,7 @@ attachments -I message/external-body # Default: no # # -# The default behaviour of mutt is to use PGP on all auto-sign/encryption +# The default behavior of mutt is to use PGP on all auto-sign/encryption # operations. To override and to use OpenSSL instead this must be set. # However, this has no effect while replying, since mutt will automatically # select the same application that was used to sign/encrypt the original @@ -3950,7 +3970,7 @@ attachments -I message/external-body # # This is a colon-delimited list of authentication methods mutt may # attempt to use to log in to an SMTP server, in the order mutt should -# try them. Authentication methods are any SASL mechanism, eg +# try them. Authentication methods are any SASL mechanism, e.g. # ``digest-md5'', ``gssapi'' or ``cram-md5''. # This option is case-insensitive. If it is ``unset'' # (the default) mutt will try all available methods, in order from @@ -3984,8 +4004,8 @@ attachments -I message/external-body # # # Defines the SMTP smarthost where sent messages should relayed for -# delivery. This should take the form of an SMTP URL, eg: -# smtp[s]://[user[:pass]@]host[:port]/ +# delivery. This should take the form of an SMTP URL, e.g.: +# smtp[s]://[user[:pass]@]host[:port] # # where ``[...]'' denotes an optional part. # Setting this variable overrides the value of the $sendmail @@ -4377,7 +4397,7 @@ attachments -I message/external-body # personal mailbox where you might have several unrelated messages with # the subjects like ``hi'' which will get grouped together. See also # $sort_re for a less drastic way of controlling this -# behaviour. +# behavior. # # # set suspend=yes @@ -4408,11 +4428,11 @@ attachments -I message/external-body # Note that $indent_string is ignored when this option is set. # # -# set thorough_search=no +# set thorough_search=yes # # Name: thorough_search # Type: boolean -# Default: no +# Default: yes # # # Affects the ~b and ~h search operations described in @@ -4472,7 +4492,7 @@ attachments -I message/external-body # Default: 600 # # -# When Mutt is waiting for user input either idleing in menus or +# When Mutt is waiting for user input either idling in menus or # in an interactive prompt, Mutt would block until input is # present. Depending on the context, this would prevent certain # operations from working, like checking for new mail or keeping @@ -4650,7 +4670,7 @@ attachments -I message/external-body # # # Specifies the visual editor to invoke when the ``~v'' command is -# given in the builtin editor. +# given in the built-in editor. # # # set wait_key=yes @@ -4693,7 +4713,24 @@ attachments -I message/external-body # # When set to a positive value, mutt will wrap text at $wrap characters. # When set to a negative value, mutt will wrap text so that there are $wrap -# characters of empty space on the right side of the terminal. +# characters of empty space on the right side of the terminal. Setting it +# to zero makes mutt wrap at the terminal width. +# +# +# set wrap_headers=78 +# +# Name: wrap_headers +# Type: number +# Default: 78 +# +# +# This option specifies the number of characters to use for wrapping +# an outgoing message's headers. Allowed values are between 78 and 998 +# inclusive. +# +# Note: This option usually shouldn't be changed. RFC5233 +# recommends a line length of 78 (the default), so please only change +# this setting when you know what you're doing. # # # set wrap_search=yes