Elimino config.h que estaba de más y hago que borre todos los archivos

[z.facultad/66.09/etherled.git] / src / dp8390.c

diff --git a/src/dp8390.c b/src/dp8390.c
index 2943554aa0a3339b0827d31ef3048dbf525e3153..1b48e9b5de256dc629aa1dead3def1b34e7e6ce4 100644 (file)
--- a/src/dp8390.c
+++ b/src/dp8390.c
@@ -1,28 +1,24 @@
 // vim: set et sw=4 sts=4 :    
 
 #include "debug.h"
 // vim: set et sw=4 sts=4 :    
 
 #include "debug.h"

+#include "leds.h"

 #include "eth.h"
 #include "dp8390.h"
 
 /** Tamaño del frame */
 byte netdev_len;
 
 #include "eth.h"
 #include "dp8390.h"
 
 /** Tamaño del frame */
 byte netdev_len;
 

-/// Datos persistentes del módulo
-static union // Unión porque nunca se usan ambos juntos
+// Próximo frame a obtener
+static struct

 {
 {

-    byte send_len; ///> Tamaño del frame que será enviado
-    byte next_pkt; ///> Próximo frame a obtener
+    byte next_buf;
+    byte curr_buf;
+    byte curr_off;

 }
 }

-persistent;
-
-/// Estructura de la cabecera del buffer de la placa de red.
-struct buf_hdr_t
-{
-    byte status;    ///> Estado del frame recibido
-    byte next;      ///> Offset del próximo frame
-    uint16 len;     ///> Tamaño del frame
-};
+recv_state;

 
 

+/// Tamaño de la cabecera de los buffers de la placa de red
+#define BUF_HDR_SIZE 4

 
 /// Cambia de página sin modificar los demás bits del CR
 #define SELECT_REG_PAGE(page)                         \
 
 /// Cambia de página sin modificar los demás bits del CR
 #define SELECT_REG_PAGE(page)                         \


@@ -45,6 +41,7 @@ struct buf_hdr_t
 
 static void write_reg(unsigned char reg, unsigned char wr_data)
 {
 
 static void write_reg(unsigned char reg, unsigned char wr_data)
 {

+    leds_lock();

     // Select register address.
     ADDR_PORT &= ~ADDR_PORT_MASK; 
     ADDR_PORT |= reg;
     // Select register address.
     ADDR_PORT &= ~ADDR_PORT_MASK; 
     ADDR_PORT |= reg;


@@ -61,11 +58,13 @@ static void write_reg(unsigned char reg, unsigned char wr_data)
 
     // Set register data port as input again.
     DATA_PORT = DATA_PORT_MASK;
 
     // Set register data port as input again.
     DATA_PORT = DATA_PORT_MASK;

+    leds_unlock();

 } 
 
 
 static unsigned char read_reg(unsigned char reg)
 {
 } 
 
 
 static unsigned char read_reg(unsigned char reg)
 {

+    leds_lock();

     // Select register address.
     ADDR_PORT &= ~ADDR_PORT_MASK;
     ADDR_PORT |= reg;
     // Select register address.
     ADDR_PORT &= ~ADDR_PORT_MASK;
     ADDR_PORT |= reg;


@@ -81,6 +80,7 @@ static unsigned char read_reg(unsigned char reg)
     IOR = 1; 
     NICE = 1;   
 
     IOR = 1; 
     NICE = 1;   
 

+    leds_unlock();

     return reg;
 } 
 
     return reg;
 } 
 


@@ -249,21 +249,58 @@ bool netdev_init()
 }
 
 
 }
 
 

-/** Comienza el envío de un nuevo frame
- * @param len Tamaño del frame a enviar
- */
+/** Comienza el envío de un nuevo frame */

 void netdev_send_start()
 {
 void netdev_send_start()
 {

-    persistent.send_len = 0;

     // Wait until pending transmit operation completes.
     // Wait until pending transmit operation completes.

-    while(read_reg(CR) & TXP) continue;
+    while (read_reg(CR) & TXP) continue;
+    write_reg(ISR, PTX); // Limpio bit de interrupción

 
     // Set remote DMA start address registers to indicate where to load packet.
     write_reg(RSAR0, 0u);
     write_reg(RSAR1, TX_PAGE_START);
 
     // Set remote DMA start address registers to indicate where to load packet.
     write_reg(RSAR0, 0u);
     write_reg(RSAR1, TX_PAGE_START);

+}
+
+/** Finaliza el envío del frame
+ * @precond netdev_send_start() debe haber sido ejecutada
+ * @precond se copiaron datos al dispositivo para enviar
+ * @param len Cantidad de bytes a transmitir
+ */
+void netdev_send_end(byte len)
+{
+    // Set transmit page start to indicate packet start.
+    write_reg(TPSR, TX_PAGE_START);
+
+    // Ethernet packets must be > 60 bytes, otherwise are rejected as runts.
+    if (len < MIN_PACKET_LEN)
+        len = MIN_PACKET_LEN;
+
+    // Set transmit byte count registers to indicate packet length.
+    write_reg(TBCR0, len);
+    write_reg(TBCR1, 0u);
+
+    // Issue command for RTL8019AS to transmit packet from it's local buffer.
+    write_reg(CR, START | TXP);
+}
+
+void netdev_write_start(byte len)
+{
+    // Set remote DMA byte count registers to indicate length of packet load.
+    write_reg(RBCR0, len);
+    write_reg(RBCR1, 0u);
+
+    // Initiate DMA transfer of uip_buf & uip_appdata buffers to RTL8019AS.
+    write_reg(CR, WRITE);
+}
+
+void netdev_write_start_at(byte offset, byte len)
+{
+    // Set remote DMA start address registers to packet data.
+    write_reg(RSAR0, offset);
+    write_reg(RSAR1, TX_PAGE_START);

 
     // Set remote DMA byte count registers to indicate length of packet load.
 
     // Set remote DMA byte count registers to indicate length of packet load.

-    write_reg(RBCR0, MAX_PACKET_LEN); // Tamaño máximo en principio
+    write_reg(RBCR0, len);

     write_reg(RBCR1, 0u);
 
     // Initiate DMA transfer of uip_buf & uip_appdata buffers to RTL8019AS.
     write_reg(RBCR1, 0u);
 
     // Initiate DMA transfer of uip_buf & uip_appdata buffers to RTL8019AS.


@@ -274,9 +311,8 @@ void netdev_send_start()
  * @precond netdev_send_start() debe haber sido ejecutada
  * @param b Byte a enviar
  */
  * @precond netdev_send_start() debe haber sido ejecutada
  * @param b Byte a enviar
  */

-void netdev_send_byte(byte b)
+void netdev_write_byte(byte b)

 {
 {

-    persistent.send_len++;

     write_reg(RDMA, b);
 }
 
     write_reg(RDMA, b);
 }
 


@@ -284,46 +320,23 @@ void netdev_send_byte(byte b)
  * @precond netdev_send_start() debe haber sido ejecutada
  * @param w Word a enviar
  */
  * @precond netdev_send_start() debe haber sido ejecutada
  * @param w Word a enviar
  */

-void netdev_send_word(uint16 w)
+void netdev_write_word(uint16 w)

 {
 {

-    persistent.send_len += 2;

     write_reg(RDMA, HIGH(w));
     write_reg(RDMA, LOW(w));
 }
 
     write_reg(RDMA, HIGH(w));
     write_reg(RDMA, LOW(w));
 }
 

-/** Finaliza el envío del frame
- * @precond netdev_send_start() debe haber sido ejecutada
- */
-void netdev_send_end()
+void netdev_write_end()

 {
     // Abort/ complete DMA operation.
     ABORT_DMA(START);
 {
     // Abort/ complete DMA operation.
     ABORT_DMA(START);

-
-    // Set transmit page start to indicate packet start.
-    write_reg(TPSR, TX_PAGE_START);
-
-    // Ethernet packets must be > 60 bytes, otherwise are rejected as runts.
-    if (persistent.send_len < MIN_PACKET_LEN)
-    {
-        persistent.send_len = MIN_PACKET_LEN;
-    }
-
-    // Set transmit byte count registers to indicate packet length.
-    write_reg(TBCR0, LOW(persistent.send_len));
-    write_reg(TBCR1, 0u);
-
-    // Issue command for RTL8019AS to transmit packet from it's local buffer.
-    write_reg(CR, START | TXP);

 }
 
 /** Comienza la lectura de un nuevo frame
 }
 
 /** Comienza la lectura de un nuevo frame

- * @precond netdev_recv_start() debe haber sido ejecutada
+ * @return Cantidad de bytes a recibir

  */
  */

-void netdev_recv_start()
+byte netdev_recv_start()

 {
 {

-    // Limpio tamaño del frame
-    netdev_len = 0;
-

     // Check if the rx buffer has overflowed.
     if (read_reg(ISR) & OVW)
     {
     // Check if the rx buffer has overflowed.
     if (read_reg(ISR) & OVW)
     {


@@ -340,25 +353,24 @@ void netdev_recv_start()
             printb(read_reg(ISR), 0x01);
             printb(read_reg(BNRY), 0x02);
             printb(current, 0x04);
             printb(read_reg(ISR), 0x01);
             printb(read_reg(BNRY), 0x02);
             printb(current, 0x04);

+            printb(0x00, 0x00);

             reset();
         }
             reset();
         }

-        return;
+        return 0;

     }
     // Check if there is a packet in the rx buffer.
     else if (read_reg(ISR) & PRX)
     {
     }
     // Check if there is a packet in the rx buffer.
     else if (read_reg(ISR) & PRX)
     {

-        struct buf_hdr_t buf_hdr;
+        byte status;
+        byte len;

         byte current;
         byte current;

-        byte bnry;

 
         // Retrieve packet header. (status, next_ptr, length_l, length_h)
 
 
         // Retrieve packet header. (status, next_ptr, length_l, length_h)
 

-        // Set remote DMA start address registers to packet header.
-        bnry = read_reg(BNRY) + 1;
-        if (bnry >= RX_PAGE_STOP)
-            bnry = RX_PAGE_START;
-        write_reg(RSAR0, 0u);
-        write_reg(RSAR1, bnry);
+        // Obtiene el buffer a leer actualmente
+        recv_state.curr_buf = read_reg(BNRY) + 1;
+        if (recv_state.curr_buf >= RX_PAGE_STOP)
+            recv_state.curr_buf = RX_PAGE_START;

 
         // Select RTL8019AS register page 1.
         SELECT_REG_PAGE(1);
 
         // Select RTL8019AS register page 1.
         SELECT_REG_PAGE(1);


@@ -370,70 +382,74 @@ void netdev_recv_start()
         SELECT_REG_PAGE(0);
 
         // Check if last packet has been removed from rx buffer.
         SELECT_REG_PAGE(0);
 
         // Check if last packet has been removed from rx buffer.

-        if(bnry == current)
+        if(recv_state.curr_buf == current)

         {
             // Clear packet received interrupt flag.
             write_reg(ISR, PRX | RXE);
         {
             // Clear packet received interrupt flag.
             write_reg(ISR, PRX | RXE);

-            return;
+            return 0;

         }
 
         // Set remote DMA byte count registers to packet header length.
         }
 
         // Set remote DMA byte count registers to packet header length.

-        write_reg(RBCR0, sizeof(struct buf_hdr_t));
-        write_reg(RBCR1, 0x00);
-
-        // Clear remote DMA complete interrupt status register bit.
-        write_reg(ISR, RDC);
-
-        // Initiate DMA transfer of packet header.
-        write_reg(CR, READ);
+        recv_state.curr_off = 0;
+        netdev_read_start(BUF_HDR_SIZE);

 
         // Packet status.
 
         // Packet status.

-        buf_hdr.status = read_reg(RDMA);
+        status = netdev_read_byte();

 
         // Save next packet pointer.
 
         // Save next packet pointer.

-        buf_hdr.next = read_reg(RDMA);
-
-        // Indicamos cual es el próximo paquete para cuando termine
-        // FIXME poner más lindo para que consuma menos memoria
-        persistent.next_pkt = buf_hdr.next - 1;
+        recv_state.next_buf = netdev_read_byte() - 1;

 
         // Retrieve packet data length and subtract CRC bytes.
 
         // Retrieve packet data length and subtract CRC bytes.

-        buf_hdr.len = read_reg(RDMA) - sizeof(struct buf_hdr_t);
+        len = netdev_read_byte() - BUF_HDR_SIZE;

 
         // Si es muy grande, muy chico o hubo error, lo descartamos
 
         // Si es muy grande, muy chico o hubo error, lo descartamos

-        if ((buf_hdr.len < MIN_PACKET_LEN) || (buf_hdr.len > MAX_PACKET_LEN)
-                || ((buf_hdr.status & 0x0F) != RXSOK)
-                || read_reg(RDMA)) // Parte alta del tamaño
+        if ((len < MIN_PACKET_LEN) || (len > MAX_PACKET_LEN)
+                || ((status & 0x0F) != RXSOK)
+                || netdev_read_byte()) // Parte alta del tamaño

         {
             // Terminamos DMA y pasamos al próximo frame
         {
             // Terminamos DMA y pasamos al próximo frame

-            ABORT_DMA(START);
-            write_reg(BNRY, persistent.next_pkt);
-            return;
+            netdev_read_end();
+            write_reg(BNRY, recv_state.next_buf);
+            return 0;

         }
 
         // Abort/ complete DMA operation.
         }
 
         // Abort/ complete DMA operation.

-        ABORT_DMA(START);
+        netdev_read_end();

 
 

-        // Todo OK, empezamos a recibir así que ponemos bien el tamaño del frame
-        netdev_len = buf_hdr.len;
+        return len;
+    }

 
 

-        // Set remote DMA start address registers to packet data.
-        write_reg(RSAR0, sizeof(struct buf_hdr_t));
-        write_reg(RSAR1, bnry);
+    return 0;
+}

 
 

-        // Set remote DMA byte count registers to packet data length.
-        write_reg(RBCR0, buf_hdr.len);
-        write_reg(RBCR1, 0u);
+/** Finaliza la recepción del frame
+ * @precond netdev_recv_start() debe haber sido ejecutada
+ */
+void netdev_recv_end()
+{
+    // Pasa el próximo frame
+    write_reg(BNRY, recv_state.next_buf);
+}

 
 

-        // Initiate DMA transfer of packet data.
-        write_reg(CR, READ);
-    }
+void netdev_read_start(byte len)
+{
+    // Set remote DMA start address registers to packet data.
+    write_reg(RSAR0, recv_state.curr_off);
+    write_reg(RSAR1, recv_state.curr_buf);
+    recv_state.curr_off += len;
+
+    // Set remote DMA byte count registers to packet data length.
+    write_reg(RBCR0, len);
+    write_reg(RBCR1, 0);
+
+    // Initiate DMA transfer of packet data.
+    write_reg(CR, READ);

 }
 
 /** Lee un byte del buffer de la placa de red
  * @precond netdev_recv_start() debe haber sido ejecutada
  */
 }
 
 /** Lee un byte del buffer de la placa de red
  * @precond netdev_recv_start() debe haber sido ejecutada
  */

-byte netdev_recv_byte()
+byte netdev_read_byte()

 {
     return read_reg(RDMA);
 }
 {
     return read_reg(RDMA);
 }


@@ -441,31 +457,18 @@ byte netdev_recv_byte()
 /** Lee un word del buffer de la placa de red
  * @precond netdev_recv_start() debe haber sido ejecutada
  */
 /** Lee un word del buffer de la placa de red
  * @precond netdev_recv_start() debe haber sido ejecutada
  */

-uint16 netdev_recv_word()
+uint16 netdev_read_word()

 {
 {

-    uint16 w = netdev_recv_byte() << 8;
-    return w + netdev_recv_byte();
+    uint16 w = read_reg(RDMA) << 8;
+    return w + read_reg(RDMA);

 }
 
 /** Finaliza la lectura del frame
  * @precond netdev_recv_start() debe haber sido ejecutada
  */
 }
 
 /** Finaliza la lectura del frame
  * @precond netdev_recv_start() debe haber sido ejecutada
  */

-void netdev_recv_end()
+void netdev_read_end()

 {
 {

-    // Termina de leer bytes de padding (si hay)
-    netdev_len += sizeof(struct buf_hdr_t);
-    if (read_reg(CRDA0) < netdev_len)
-    {
-        netdev_len -= read_reg(CRDA0) - 1; // El puntero está adelantado en 1
-        while (netdev_len--)
-        {
-            //printb(read_reg(CRDA0), netdev_len);
-            netdev_recv_byte();
-        }
-    }

     // Completa DMA
     ABORT_DMA(START);
     // Completa DMA
     ABORT_DMA(START);

-    // Pasa el próximo frame
-    write_reg(BNRY, persistent.next_pkt);

 }
 
 }