Adapto ejemplo básico que andaba a SDCC y funciona correctamente.

[z.facultad/66.09/etherled.git] / pruebas / keil / red_test_anda / etherdev.c

diff --git a/pruebas/keil/red_test_anda/etherdev.c b/pruebas/keil/red_test_anda/etherdev.c
index d3b1a5a2a29addc95d2542ce78436bb7e9757925..93abcbf4198b9e38999ad673d520a5094296c521 100644 (file)
--- a/pruebas/keil/red_test_anda/etherdev.c
+++ b/pruebas/keil/red_test_anda/etherdev.c
@@ -1,11 +1,17 @@
 // vim: set et sw=4 sts=4 :    
 
+#include "types.h"
 #include "etherdev.h"
 
 void sleep(unsigned char);
 
-static xdata leds1 _at_ 0x0080;
-static xdata leds2 _at_ 0x00c0;
+#ifdef SDCC
+static xdata at 0x0080 byte leds1;
+static xdata at 0x00c0 byte leds2;
+#else
+static byte xdata leds1 _at_ 0x0080;
+static byte xdata leds2 _at_ 0x00c0;
+#endif
 
 unsigned char uip_buf[80] =
 {
@@ -56,9 +62,6 @@ static void etherdev_reg_write(unsigned char reg, unsigned char wr_data)
     IOW = 1;
     NICE = 1;
 
-    // Set register data port as input again.
-    ETH_DATA_PORT = ETH_DATA_PORT_MASK;
-
     return;
 } 
 
@@ -71,6 +74,9 @@ static unsigned char etherdev_reg_read(unsigned char reg)
     ETH_ADDR_PORT &= ~ETH_ADDR_PORT_MASK;
     ETH_ADDR_PORT |= reg;
 
+    // Set register data port as input.
+    ETH_DATA_PORT = ETH_DATA_PORT_MASK;
+
     // Enable register data output from RTL8019AS.
     NICE = 0;
     IOR = 0;
@@ -94,7 +100,7 @@ static unsigned char etherdev_reg_read(unsigned char reg)
   Refer to National Semiconductor DP8390 App Note 874, July 1993.    
                                                                      
  */
-bit etherdev_init(void)
+bool etherdev_init(void)
 {
     // Set IOR & IOW as they're active low.
     IOR = 1;
@@ -120,7 +126,7 @@ bit etherdev_init(void)
     }
 
     // Stop RTL8019AS, select page 0 and abort DMA operation.
-    etherdev_reg_write(CR, RD2 | STP);
+    etherdev_reg_write(CR, ABORT | STP);
 
     // Initialise data configuration register. 
     // FIFO threshold 8 bytes, no loopback, don't use auto send packet.
@@ -134,20 +140,20 @@ bit etherdev_init(void)
     etherdev_reg_write(RCR, MON);
 
     // Initialise transmit configuration register to loopback internally.
-    etherdev_reg_write(TCR, LB0);
+    etherdev_reg_write(TCR, MODE1);
 
     // Clear interrupt status register bits by writing 1 to each.
     etherdev_reg_write(ISR, 0xFF);
 
     // Mask all interrupts in mask register.
     etherdev_reg_write(IMR, 0x00);
-
+    
     // Obtengo MAC de la placa
     etherdev_reg_write(RBCR0, 0x0c); // Vamos a leer 12 bytes (2 x 6)
     etherdev_reg_write(RBCR1, 0x00); 
     etherdev_reg_write(RSAR0, 0x00); // En la dirección 0x0000
     etherdev_reg_write(RSAR1, 0x00);
-    etherdev_reg_write(CR, RD0 | STA); // Comienza lectura
+    etherdev_reg_write(CR, READ | STA); // Comienza lectura
     uip_buf[6] = etherdev_reg_read(RDMA);
     etherdev_reg_read(RDMA); // Ignoramos porque viene como un word
     uip_buf[7] = etherdev_reg_read(RDMA);
@@ -165,7 +171,7 @@ bit etherdev_init(void)
     while(!(etherdev_reg_read(ISR) & RDC)) continue;
 
     // Abort/ complete DMA operation.
-    etherdev_reg_write(CR, RD2 | STP);
+    etherdev_reg_write(CR, ABORT | STP);
 
     // Limpia ISR
     etherdev_reg_write(ISR, RDC);
@@ -183,27 +189,27 @@ bit etherdev_init(void)
     etherdev_reg_write(PSTOP, ETH_RX_PAGE_STOP);
 
     // Select RTL8019AS register page 1.
-    etherdev_reg_write(CR, RD2 | PS0 | STP);
+    etherdev_reg_write(CR, ABORT | PAGE1 | STP);
 
     // Initialise current packet receive buffer page pointer
     etherdev_reg_write(CURR, ETH_RX_PAGE_START + 1);
 
     // Set physical address
-    etherdev_reg_write(PAR0, uip_buf[0]);
-    etherdev_reg_write(PAR1, uip_buf[0]);
-    etherdev_reg_write(PAR2, uip_buf[0]);
-    etherdev_reg_write(PAR3, uip_buf[0]);
-    etherdev_reg_write(PAR4, uip_buf[0]);
-    etherdev_reg_write(PAR5, uip_buf[0]);
+    etherdev_reg_write(PAR0, uip_buf[6]);
+    etherdev_reg_write(PAR1, uip_buf[7]);
+    etherdev_reg_write(PAR2, uip_buf[8]);
+    etherdev_reg_write(PAR3, uip_buf[9]);
+    etherdev_reg_write(PAR4, uip_buf[10]);
+    etherdev_reg_write(PAR5, uip_buf[11]);
 
     // Select RTL8019AS register page 0 and abort DMA operation.
-    etherdev_reg_write(CR, RD2 | STP);
+    etherdev_reg_write(CR, ABORT | STP);
 
     // Restart RTL8019AS. 
-    etherdev_reg_write(CR, RD2 | STA);
+    etherdev_reg_write(CR, ABORT | STA);
 
     // Initialise transmit configuration register for normal operation.
-    etherdev_reg_write(TCR, 0x00);
+    etherdev_reg_write(TCR, MODE0);
 
     // Receive configuration register to accept broadcast packets.
     etherdev_reg_write(RCR, AB);
@@ -227,7 +233,7 @@ void etherdev_send(void)
     // Setup for DMA transfer from uip_buf & uip_appdata buffers to RTL8019AS.
 
     // Select RTL8019AS register page 0 and abort DMA operation.
-    etherdev_reg_write(CR, RD2 | STA);
+    etherdev_reg_write(CR, ABORT | STA);
 
     // Wait until pending transmit operation completes.
     while(etherdev_reg_read(CR) & TXP) continue;
@@ -241,7 +247,7 @@ void etherdev_send(void)
     etherdev_reg_write(RBCR1, (unsigned char)(uip_len >> 8));
 
     // Initiate DMA transfer of uip_buf & uip_appdata buffers to RTL8019AS.
-    etherdev_reg_write(CR, RD1 | STA);
+    etherdev_reg_write(CR, WRITE | STA);
 
     // DMA transfer packet from uip_buf & uip_appdata to RTL8019AS local
     // transmit buffer memory.
@@ -257,7 +263,7 @@ void etherdev_send(void)
     etherdev_reg_write(ISR, RDC);
 
     // Abort/ complete DMA operation.
-    etherdev_reg_write(CR, RD2 | STA);
+    etherdev_reg_write(CR, ABORT | STA);
 
     // Set transmit page start to indicate packet start.
     etherdev_reg_write(TPSR, ETH_TX_PAGE_START);
@@ -273,7 +279,7 @@ void etherdev_send(void)
     etherdev_reg_write(TBCR1, (unsigned char)(uip_len >> 8));
 
     // Issue command for RTL8019AS to transmit packet from it's local buffer.
-    etherdev_reg_write(CR, RD2 | TXP | STA);
+    etherdev_reg_write(CR, ABORT | TXP | STA);
 
     return;
 }
@@ -288,7 +294,7 @@ static void etherdev_reset()
     // data it contains is uncorrupted, or will cause us grief.
 
     // Stop RTL8019AS and abort DMA operation.
-    etherdev_reg_write(CR, RD2 | STP);
+    etherdev_reg_write(CR, ABORT | STP);
 
     // Wait for controller to halt after any current tx completes.
     while(!(etherdev_reg_read(ISR) & RST)) continue;
@@ -309,10 +315,10 @@ static void etherdev_reset()
     }
 
     // Set transmit configuration register to loopback internally.
-    etherdev_reg_write(TCR, LB0);
+    etherdev_reg_write(TCR, MODE1);
 
     // Restart the RTL8019AS.
-    etherdev_reg_write(CR, RD2 | STA);
+    etherdev_reg_write(CR, ABORT | STA);
 
     // Re-initialise last receive buffer read pointer.
     etherdev_reg_write(BNRY, ETH_RX_PAGE_START);
@@ -330,12 +336,12 @@ static void etherdev_reset()
     etherdev_reg_write(ISR, PRX | OVW);
 
     // Re-itialise transmit configuration reg for normal operation.
-    etherdev_reg_write(TCR, 0x00);
+    etherdev_reg_write(TCR, MODE0);
 
     if(retransmit)
     {
         // Retransmit packet in RTL8019AS local tx buffer.
-        etherdev_reg_write(CR, RD2 | TXP | STA);
+        etherdev_reg_write(CR, ABORT | TXP | STA);
     }
 }
 
@@ -417,7 +423,7 @@ unsigned int etherdev_read(void)
         etherdev_reg_write(ISR, RDC);
 
         // Initiate DMA transfer of packet header.
-        etherdev_reg_write(CR, RD0 | STA);
+        etherdev_reg_write(CR, READ | STA);
 
         // Packet status.
         status = etherdev_reg_read(RDMA);
@@ -434,7 +440,7 @@ unsigned int etherdev_read(void)
         while(!(etherdev_reg_read(ISR) & RDC)) continue;
 
         // Abort/ complete DMA operation.
-        etherdev_reg_write(CR, RD2 | STA);
+        etherdev_reg_write(CR, ABORT | STA);
 
         // Limpia ISR
         etherdev_reg_write(ISR, RDC);
@@ -468,7 +474,7 @@ unsigned int etherdev_read(void)
             etherdev_reg_write(RBCR1, (unsigned char)(len >> 8));
 
             // Initiate DMA transfer of packet data.
-            etherdev_reg_write(CR, RD0 | STA);
+            etherdev_reg_write(CR, READ | STA);
 
             // Read packet data directly into uip_buf.
             uip_len = len;
@@ -485,7 +491,7 @@ unsigned int etherdev_read(void)
             while(!(etherdev_reg_read(ISR) & RDC)) continue;
 
             // Abort/ complete DMA operation.
-            etherdev_reg_write(CR, RD2 | STA);
+            etherdev_reg_write(CR, ABORT | STA);
 
             // Clear remote DMA complete interrupt status register bit.
             etherdev_reg_write(ISR, RDC);