Table of Contents
Mutt supports several of optional features which can be enabled or disabled at compile-time by giving the configure script certain arguments. These are listed in the ``Optional features'' section of the configure --help output.
Which features are enabled or disabled can later be determined from the
output of mutt -v. If a compile option starts with
``+'' it is enabled and disabled if prefixed with ``-''. For example, if
mutt was compiled using GnuTLS for encrypted communication instead of
OpenSSL, mutt -v would contain:
-USE_SSL_OPENSSL +USE_SSL_GNUTLS
Mutt optionally supports the IMAP, POP3 and SMTP protocols which require
to access servers using URLs. The canonical syntax for specifying URLs
in mutt is (an item enclosed in [] means it is optional and
may be omitted):
proto[s]://[username[:password]@]server[:port]/[path]
proto is the communication protocol:
imap for IMAP, pop for POP3 and
smtp for SMTP. If ``s'' for ``secure communication''
is appended, mutt will attempt to establish an encrypted communication
using SSL or TLS. If no explicit port is given, mutt will use the
system's default for the given protocol.
Since all protocols by mutt support authentication, the username may be
given directly in the URL instead of using the pop_user or
imap_user variables. A password can be given, too but
is not recommended if the URL is specified in a configuration file on
disk.
The optional path is only relevant for IMAP.
For IMAP for example, you can select an alternative port by specifying it with the
server: imap://imapserver:port/INBOX. You can also specify different
username for each folder: imap://username@imapserver[:port]/INBOX
or imap://username2@imapserver[:port]/path/to/folder.
Replacing imap:// by imaps://
would make mutt attempt to conect using SSL or TLS on a different port
to encrypt the communication.
If mutt is compiled with IMAP, POP3 and/or SMTP support, it can also be compiled with support for SSL or TLS using either OpenSSL or GnuTLS ( by running the configure script with the --enable-ssl=... option for OpenSSL or --enable-gnutls=... for GnuTLS). Mutt can then attempt to encrypt communication with remote servers if these protocols are suffixed with ``s'' for ``secure communication''.
If Mutt was compiled with POP3 support (by running the configure script with the --enable-pop flag), it has the ability to work with mailboxes located on a remote POP3 server and fetch mail for local browsing.
Remote POP3 servers can be accessed using URLs with the pop protocol
for unencrypted and pops for encrypted
communication, see Section 1.2, “URL syntax” for details.
Polling for new mail is more expensive over POP3 than locally. For this reason the frequency at which Mutt will check for mail remotely can be controlled by the $pop_checkinterval variable, which defaults to every 60 seconds.
Another way to access your POP3 mail is the fetch-mail function (default: G). It allows to connect to $pop_host, fetch all your new mail and place it in the local $spoolfile. After this point, Mutt runs exactly as if the mail had always been local.
Note: If you only need to fetch all messages to a
local mailbox you should consider using a specialized program, such as
fetchmail, getmail or similar.
If Mutt was compiled with IMAP support (by running the configure script with the --enable-imap flag), it has the ability to work with folders located on a remote IMAP server.
You can access the remote inbox by selecting the folder by its URL
(see Section 1.2, “URL syntax” for details) using the
imap or imaps protocol.
Alternatively, a pine-compatible notation is also supported, ie
{[username@]imapserver[:port][/ssl]}path/to/folder
Note that not all servers use ``/'' as the hierarchy separator. Mutt should correctly notice which separator is being used by the server and convert paths accordingly.
When browsing folders on an IMAP server, you can toggle whether to look at only the folders you are subscribed to, or all folders with the toggle-subscribed command. See also the $imap_list_subscribed variable.
Polling for new mail on an IMAP server can cause noticeable delays. So, you'll want to carefully tune the $mail_check and $timeout variables. Personally I use
set mail_check=90 set timeout=15
with relatively good results over my slow modem line.
Note that if you are using mbox as the mail store on UW servers prior to v12.250, the server has been reported to disconnect a client if another client selects the same folder.
As of version 1.2, mutt supports browsing mailboxes on an IMAP server. This is mostly the same as the local file browser, with the following differences:
In lieu of file permissions, mutt displays the string "IMAP", possibly followed by the symbol "+", indicating that the entry contains both messages and subfolders. On Cyrus-like servers folders will often contain both messages and subfolders.
For the case where an entry can contain both messages and
subfolders, the selection key (bound to enter by default)
will choose to descend into the subfolder view. If you wish to view
the messages in that folder, you must use view-file instead
(bound to space by default).
You can create, delete and rename mailboxes with the
create-mailbox, delete-mailbox, and
rename-mailbox commands (default bindings: C,
d and r, respectively). You may also
subscribe and unsubscribe to mailboxes (normally
these are bound to s and u, respectively).
Mutt supports four authentication methods with IMAP servers: SASL, GSSAPI, CRAM-MD5, and LOGIN (there is a patch by Grant Edwards to add NTLM authentication for you poor exchange users out there, but it has yet to be integrated into the main tree). There is also support for the pseudo-protocol ANONYMOUS, which allows you to log in to a public IMAP server without having an account. To use ANONYMOUS, simply make your username blank or "anonymous".
SASL is a special super-authenticator, which selects among several protocols (including GSSAPI, CRAM-MD5, ANONYMOUS, and DIGEST-MD5) the most secure method available on your host and the server. Using some of these methods (including DIGEST-MD5 and possibly GSSAPI), your entire session will be encrypted and invisible to those teeming network snoops. It is the best option if you have it. To use it, you must have the Cyrus SASL library installed on your system and compile mutt with the --with-sasl flag.
Mutt will try whichever methods are compiled in and available on the server, in the following order: SASL, ANONYMOUS, GSSAPI, CRAM-MD5, LOGIN.
There are a few variables which control authentication:
$imap_user - controls
the username under which you request authentication on the IMAP server,
for all authenticators. This is overridden by an explicit username in
the mailbox path (ie by using a mailbox name of the form
{user@host}).
$imap_pass - a password which you may preset, used by all authentication methods where a password is needed.
$imap_authenticators - a colon-delimited list of IMAP authentication methods to try, in the order you wish to try them. If specified, this overrides mutt's default (attempt everything, in the order listed above).
Besides supporting traditional mail delivery through a
sendmail-compatible program, mutt supports delivery through SMTP if it
was configured and built with --enable-smtp.
If the configuration variable $smtp_url is set, mutt will contact the given SMTP server to deliver messages; if it is unset, mutt will use the program specified by $sendmail.
For details on the URL syntax, please see Section 1.2, “URL syntax”.
The built-in SMTP support supports encryption (the smtps protocol
using SSL or TLS) as well as SMTP authentication using SASL. The authentication mechanisms
for SASL are specified in $smtp_authenticators
defaulting to an empty list which makes mutt try all available methods
from most-secure to least-secure.
If you happen to have accounts on multiple IMAP, POP and/or SMTP servers, you may find managing all the authentication settings inconvenient and error-prone. The account-hook command may help. This hook works like folder-hook but is invoked whenever you access a remote mailbox (including inside the folder browser), not just when you open the mailbox.
Some examples:
account-hook . 'unset imap_user; unset imap_pass; unset tunnel' account-hook imap://host1/ 'set imap_user=me1 imap_pass=foo' account-hook imap://host2/ 'set tunnel="ssh host2 /usr/libexec/imapd"' account-hook smtp://user@host3/ 'set tunnel="ssh host3 /usr/libexec/smtpd"'
Mutt contains two types of local caching: (1) the so-called ``header caching'' and (2) the so-called ``body caching'' which are both described in this section.
Header caching is optional as it depends on external libraries, body caching is always enabled if mutt is compiled with POP and/or IMAP support as these use it (body caching requires no external library).
Mutt provides optional support for caching message headers for the following types of folders: IMAP, POP, Maildir and MH. Header caching greatly improves speed because for remote folders, headers usually only need to be downloaded once. For Maildir and MH, reading the headers from a single file is much faster than looking at possibly thousands of single files (since Maildir and MH use one file per message.)
Header caching can be enabled via the configure script and the --enable-hcache option. It's not turned on by default because external database libraries are required: one of qdbm, gdbm or bdb must be present.
If enabled, $header_cache can be used to either point to a file or a directory. If set to point to a file, one database file for all folders will be used (which may result in lower performance), but one file per folder if it points to a directory.
For the one-file-per-folder case, database files for remote folders will be named according to their URL while database files for local folders will be named by the MD5 checksums of their path. These database files may be safely removed if a system is short on space. You can compute the name of the header cache file for a particular local folder through a command like the following:
$ printf '%s' '/path/to/folder' | md5sum
The md5sum command may also be
named md5, depending on your operating system.
Both cache methods can be combined using the same directory for storage (and for IMAP/POP even provide meaningful file names) which simplifies manual maintenance tasks.
In addition to caching message headers only, mutt can also cache whole message bodies. This results in faster display of messages for POP and IMAP folders because messages usually have to be downloaded only once.
For configuration, the variable $message_cachedir must point to a
directory. There, mutt will create a hierarchy of subdirectories
named like: proto:user@hostname where
proto is either ``pop'' or ``imap.'' Within
there for each folder, mutt stores messages in single files (just
like Maildir) so that with manual symlink creation these cache
directories can be examined with mutt as read-only Maildir folders.
All files can be removed as needed if the consumed disk space becomes an issue as mutt will silently fetch missing items again.
Mutt does not (yet) support maintenance features for header cache database files so that files have to be removed in case they grow too big. It depends on the database library used for header caching whether disk space freed by removing messages is re-used.
For body caches, mutt can keep the local cache in sync with the remote mailbox if the $message_cache_clean variable is set. Cleaning means to remove messages from the cache which are no longer present in the mailbox which only happens when other mail clients or instances of mutt using a different body cache location delete messages (Mutt itself removes deleted messages from the cache when syncing a mailbox). As cleaning can take a noticeable amount of time, it should not be set in general but only occasionally.
Mutt supports the ``Name <user@host>'' address syntax for reading and
writing messages, the older ``user@host (Name)'' syntax is only supported when
reading messages. The --enable-exact-address
switch can be given to configure to build it with write-support
for the latter syntax. EXACT_ADDRESS in the output of
mutt -v indicates whether it's supported.