#include <ev.h>
+=head1 EXAMPLE PROGRAM
+
+ #include <ev.h>
+
+ ev_io stdin_watcher;
+ ev_timer timeout_watcher;
+
+ /* called when data readable on stdin */
+ static void
+ stdin_cb (EV_P_ struct ev_io *w, int revents)
+ {
+ /* puts ("stdin ready"); */
+ ev_io_stop (EV_A_ w); /* just a syntax example */
+ ev_unloop (EV_A_ EVUNLOOP_ALL); /* leave all loop calls */
+ }
+
+ static void
+ timeout_cb (EV_P_ struct ev_timer *w, int revents)
+ {
+ /* puts ("timeout"); */
+ ev_unloop (EV_A_ EVUNLOOP_ONE); /* leave one loop call */
+ }
+
+ int
+ main (void)
+ {
+ struct ev_loop *loop = ev_default_loop (0);
+
+ /* initialise an io watcher, then start it */
+ ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
+ ev_io_start (loop, &stdin_watcher);
+
+ /* simple non-repeating 5.5 second timeout */
+ ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
+ ev_timer_start (loop, &timeout_watcher);
+
+ /* loop till timeout or data ready */
+ ev_loop (loop, 0);
+
+ return 0;
+ }
+
=head1 DESCRIPTION
Libev is an event loop: you register interest in certain events (such as a
=head1 FEATURES
-Libev supports select, poll, the linux-specific epoll and the bsd-specific
-kqueue mechanisms for file descriptor events, relative timers, absolute
-timers with customised rescheduling, signal events, process status change
-events (related to SIGCHLD), and event watchers dealing with the event
-loop mechanism itself (idle, prepare and check watchers). It also is quite
-fast (see this L<benchmark|http://libev.schmorp.de/bench.html> comparing
-it to libevent for example).
+Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
+BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
+for file descriptor events (C<ev_io>), the Linux C<inotify> interface
+(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
+with customised rescheduling (C<ev_periodic>), synchronous signals
+(C<ev_signal>), process status change events (C<ev_child>), and event
+watchers dealing with the event loop mechanism itself (C<ev_idle>,
+C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as
+file watchers (C<ev_stat>) and even limited support for fork events
+(C<ev_fork>).
+
+It also is quite fast (see this
+L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
+for example).
=head1 CONVENTIONS
-Libev is very configurable. In this manual the default configuration
-will be described, which supports multiple event loops. For more info
-about various configuration options please have a look at the file
-F<README.embed> in the libev distribution. If libev was configured without
-support for multiple event loops, then all functions taking an initial
-argument of name C<loop> (which is always of type C<struct ev_loop *>)
-will not have this argument.
+Libev is very configurable. In this manual the default configuration will
+be described, which supports multiple event loops. For more info about
+various configuration options please have a look at B<EMBED> section in
+this manual. If libev was configured without support for multiple event
+loops, then all functions taking an initial argument of name C<loop>
+(which is always of type C<struct ev_loop *>) will not have this argument.
=head1 TIME REPRESENTATION
to the C<double> type in C, and when you need to do any calculations on
it, you should treat it as such.
-
=head1 GLOBAL FUNCTIONS
These functions can be called anytime, even before initialising the
compatible to older versions, so a larger minor version alone is usually
not a problem.
-Example: make sure we haven't accidentally been linked against the wrong
-version:
+Example: Make sure we haven't accidentally been linked against the wrong
+version.
assert (("libev version mismatch",
ev_version_major () == EV_VERSION_MAJOR
=item ev_set_allocator (void *(*cb)(void *ptr, long size))
-Sets the allocation function to use (the prototype is similar to the
-realloc C function, the semantics are identical). It is used to allocate
-and free memory (no surprises here). If it returns zero when memory
-needs to be allocated, the library might abort or take some potentially
-destructive action. The default is your system realloc function.
+Sets the allocation function to use (the prototype is similar - the
+semantics is identical - to the realloc C function). It is used to
+allocate and free memory (no surprises here). If it returns zero when
+memory needs to be allocated, the library might abort or take some
+potentially destructive action. The default is your system realloc
+function.
You could override this function in high-availability programs to, say,
free some memory if it cannot allocate memory, to use a special allocator,
or even to sleep a while and retry until some memory is available.
-Example: replace the libev allocator with one that waits a bit and then
-retries: better than mine).
+Example: Replace the libev allocator with one that waits a bit and then
+retries).
static void *
- persistent_realloc (void *ptr, long size)
+ persistent_realloc (void *ptr, size_t size)
{
for (;;)
{
requested operation, or, if the condition doesn't go away, do bad stuff
(such as abort).
-Example: do the same thing as libev does internally:
+Example: This is basically the same thing that libev does internally, too.
static void
fatal_error (const char *msg)
useful to try out specific backends to test their performance, or to work
around bugs.
+=item C<EVFLAG_FORKCHECK>
+
+Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after
+a fork, you can also make libev check for a fork in each iteration by
+enabling this flag.
+
+This works by calling C<getpid ()> on every iteration of the loop,
+and thus this might slow down your event loop if you do a lot of loop
+iterations and little real work, but is usually not noticeable (on my
+Linux system for example, C<getpid> is actually a simple 5-insn sequence
+without a syscall and thus I<very> fast, but my Linux system also has
+C<pthread_atfork> which is even faster).
+
+The big advantage of this flag is that you can forget about fork (and
+forget about forgetting to tell libev about forking) when you use this
+flag.
+
+This flag setting cannot be overriden or specified in the C<LIBEV_FLAGS>
+environment variable.
+
=item C<EVBACKEND_SELECT> (value 1, portable select backend)
This is your standard select(2) backend. Not I<completely> standard, as
handle signal and child watchers, and attempts to do so will be greeted by
undefined behaviour (or a failed assertion if assertions are enabled).
-Example: try to create a event loop that uses epoll and nothing else.
+Example: Try to create a event loop that uses epoll and nothing else.
struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
if (!epoller)
C<ev_loop_new>. Yes, you have to call this on every allocated event loop
after fork, and how you do this is entirely your own problem.
+=item unsigned int ev_loop_count (loop)
+
+Returns the count of loop iterations for the loop, which is identical to
+the number of times libev did poll for new events. It starts at C<0> and
+happily wraps around with enough iterations.
+
+This value can sometimes be useful as a generation counter of sorts (it
+"ticks" the number of loop iterations), as it roughly corresponds with
+C<ev_prepare> and C<ev_check> calls.
+
=item unsigned int ev_backend (loop)
Returns one of the C<EVBACKEND_*> flags indicating the event backend in
- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
were used, return, otherwise continue with step *.
-Example: queue some jobs and then loop until no events are outsanding
+Example: Queue some jobs and then loop until no events are outsanding
anymore.
... queue jobs here, make sure they register event watchers as long
way to do this for generic recurring timers or from within third-party
libraries. Just remember to I<unref after start> and I<ref before stop>.
-Example: create a signal watcher, but keep it from keeping C<ev_loop>
+Example: Create a signal watcher, but keep it from keeping C<ev_loop>
running when nothing else is active.
- struct dv_signal exitsig;
+ struct ev_signal exitsig;
ev_signal_init (&exitsig, sig_cb, SIGINT);
- ev_signal_start (myloop, &exitsig);
- evf_unref (myloop);
+ ev_signal_start (loop, &exitsig);
+ evf_unref (loop);
-Example: for some weird reason, unregister the above signal handler again.
+Example: For some weird reason, unregister the above signal handler again.
- ev_ref (myloop);
- ev_signal_stop (myloop, &exitsig);
+ ev_ref (loop);
+ ev_signal_stop (loop, &exitsig);
=back
The pid specified in the C<ev_child> watcher has received a status change.
+=item C<EV_STAT>
+
+The path specified in the C<ev_stat> watcher changed its attributes somehow.
+
=item C<EV_IDLE>
The C<ev_idle> watcher has determined that you have nothing better to do.
(for example, a C<ev_prepare> watcher might start an idle watcher to keep
C<ev_loop> from blocking).
+=item C<EV_EMBED>
+
+The embedded event loop specified in the C<ev_embed> watcher needs attention.
+
+=item C<EV_FORK>
+
+The event loop has been resumed in the child process after fork (see
+C<ev_fork>).
+
=item C<EV_ERROR>
An unspecified error has occured, the watcher has been stopped. This might
C<ev_TYPE_set> is safe) and you must make sure the watcher is available to
libev (e.g. you cnanot C<free ()> it).
-=item callback = ev_cb (ev_TYPE *watcher)
+=item callback ev_cb (ev_TYPE *watcher)
Returns the callback currently set on the watcher.
...
}
-More interesting and less C-conformant ways of catsing your callback type
-have been omitted....
+More interesting and less C-conformant ways of casting your callback type
+instead have been omitted.
+
+Another common scenario is having some data structure with multiple
+watchers:
+
+ struct my_biggy
+ {
+ int some_data;
+ ev_timer t1;
+ ev_timer t2;
+ }
+
+In this case getting the pointer to C<my_biggy> is a bit more complicated,
+you need to use C<offsetof>:
+
+ #include <stddef.h>
+
+ static void
+ t1_cb (EV_P_ struct ev_timer *w, int revents)
+ {
+ struct my_biggy big = (struct my_biggy *
+ (((char *)w) - offsetof (struct my_biggy, t1));
+ }
+
+ static void
+ t2_cb (EV_P_ struct ev_timer *w, int revents)
+ {
+ struct my_biggy big = (struct my_biggy *
+ (((char *)w) - offsetof (struct my_biggy, t2));
+ }
=head1 WATCHER TYPES
This section describes each watcher in detail, but will not repeat
-information given in the last section.
+information given in the last section. Any initialisation/set macros,
+functions and members specific to the watcher type are explained.
+
+Members are additionally marked with either I<[read-only]>, meaning that,
+while the watcher is active, you can look at the member and expect some
+sensible content, but you must not modify it (you can modify it while the
+watcher is stopped to your hearts content), or I<[read-write]>, which
+means you can expect it to have some sensible content while the watcher
+is active, but you can also modify it. Modifying it may not do something
+sensible or take immediate effect (or do anything at all), but libev will
+not crash or malfunction in any way.
=head2 C<ev_io> - is this file descriptor readable or writable?
rceeive events for and events is either C<EV_READ>, C<EV_WRITE> or
C<EV_READ | EV_WRITE> to receive the given events.
+=item int fd [read-only]
+
+The file descriptor being watched.
+
+=item int events [read-only]
+
+The events being watched.
+
=back
-Example: call C<stdin_readable_cb> when STDIN_FILENO has become, well
+Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
readable, but only once. Since it is likely line-buffered, you could
-attempt to read a whole line in the callback:
+attempt to read a whole line in the callback.
static void
stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)
This will act as if the timer timed out and restart it again if it is
repeating. The exact semantics are:
-If the timer is started but nonrepeating, stop it.
+If the timer is pending, its pending status is cleared.
+
+If the timer is started but nonrepeating, stop it (as if it timed out).
-If the timer is repeating, either start it if necessary (with the repeat
-value), or reset the running timer to the repeat value.
+If the timer is repeating, either start it if necessary (with the
+C<repeat> value), or reset the running timer to the C<repeat> value.
This sounds a bit complicated, but here is a useful and typical
example: Imagine you have a tcp connection and you want a so-called idle
timeout, that is, you want to be called when there have been, say, 60
seconds of inactivity on the socket. The easiest way to do this is to
-configure an C<ev_timer> with after=repeat=60 and calling ev_timer_again each
-time you successfully read or write some data. If you go into an idle
-state where you do not expect data to travel on the socket, you can stop
-the timer, and again will automatically restart it if need be.
+configure an C<ev_timer> with a C<repeat> value of C<60> and then call
+C<ev_timer_again> each time you successfully read or write some data. If
+you go into an idle state where you do not expect data to travel on the
+socket, you can C<ev_timer_stop> the timer, and C<ev_timer_again> will
+automatically restart it if need be.
+
+That means you can ignore the C<after> value and C<ev_timer_start>
+altogether and only ever use the C<repeat> value and C<ev_timer_again>:
+
+ ev_timer_init (timer, callback, 0., 5.);
+ ev_timer_again (loop, timer);
+ ...
+ timer->again = 17.;
+ ev_timer_again (loop, timer);
+ ...
+ timer->again = 10.;
+ ev_timer_again (loop, timer);
+
+This is more slightly efficient then stopping/starting the timer each time
+you want to modify its timeout value.
+
+=item ev_tstamp repeat [read-write]
+
+The current C<repeat> value. Will be used each time the watcher times out
+or C<ev_timer_again> is called and determines the next timeout (if any),
+which is also when any modifications are taken into account.
=back
-Example: create a timer that fires after 60 seconds.
+Example: Create a timer that fires after 60 seconds.
static void
one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
ev_timer_start (loop, &mytimer);
-Example: create a timeout timer that times out after 10 seconds of
+Example: Create a timeout timer that times out after 10 seconds of
inactivity.
static void
a different time than the last time it was called (e.g. in a crond like
program when the crontabs have changed).
+=item ev_tstamp interval [read-write]
+
+The current interval value. Can be modified any time, but changes only
+take effect when the periodic timer fires or C<ev_periodic_again> is being
+called.
+
+=item ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now) [read-write]
+
+The current reschedule callback, or C<0>, if this functionality is
+switched off. Can be changed any time, but changes only take effect when
+the periodic timer fires or C<ev_periodic_again> is being called.
+
=back
-Example: call a callback every hour, or, more precisely, whenever the
+Example: Call a callback every hour, or, more precisely, whenever the
system clock is divisible by 3600. The callback invocation times have
potentially a lot of jittering, but good long-term stability.
ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
ev_periodic_start (loop, &hourly_tick);
-Example: the same as above, but use a reschedule callback to do it:
+Example: The same as above, but use a reschedule callback to do it:
#include <math.h>
ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
-Example: call a callback every hour, starting now:
+Example: Call a callback every hour, starting now:
struct ev_periodic hourly_tick;
ev_periodic_init (&hourly_tick, clock_cb,
Configures the watcher to trigger on the given signal number (usually one
of the C<SIGxxx> constants).
+=item int signum [read-only]
+
+The signal the watcher watches out for.
+
=back
C<waitpid> documentation). The C<rpid> member contains the pid of the
process causing the status change.
+=item int pid [read-only]
+
+The process id this watcher watches out for, or C<0>, meaning any process id.
+
+=item int rpid [read-write]
+
+The process id that detected a status change.
+
+=item int rstatus [read-write]
+
+The process exit/trace status caused by C<rpid> (see your systems
+C<waitpid> and C<sys/wait.h> documentation for details).
+
=back
-Example: try to exit cleanly on SIGINT and SIGTERM.
+Example: Try to exit cleanly on SIGINT and SIGTERM.
static void
sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)
ev_signal_start (loop, &sigint_cb);
+=head2 C<ev_stat> - did the file attributes just change?
+
+This watches a filesystem path for attribute changes. That is, it calls
+C<stat> regularly (or when the OS says it changed) and sees if it changed
+compared to the last time, invoking the callback if it did.
+
+The path does not need to exist: changing from "path exists" to "path does
+not exist" is a status change like any other. The condition "path does
+not exist" is signified by the C<st_nlink> field being zero (which is
+otherwise always forced to be at least one) and all the other fields of
+the stat buffer having unspecified contents.
+
+The path I<should> be absolute and I<must not> end in a slash. If it is
+relative and your working directory changes, the behaviour is undefined.
+
+Since there is no standard to do this, the portable implementation simply
+calls C<stat (2)> regularly on the path to see if it changed somehow. You
+can specify a recommended polling interval for this case. If you specify
+a polling interval of C<0> (highly recommended!) then a I<suitable,
+unspecified default> value will be used (which you can expect to be around
+five seconds, although this might change dynamically). Libev will also
+impose a minimum interval which is currently around C<0.1>, but thats
+usually overkill.
+
+This watcher type is not meant for massive numbers of stat watchers,
+as even with OS-supported change notifications, this can be
+resource-intensive.
+
+At the time of this writing, only the Linux inotify interface is
+implemented (implementing kqueue support is left as an exercise for the
+reader). Inotify will be used to give hints only and should not change the
+semantics of C<ev_stat> watchers, which means that libev sometimes needs
+to fall back to regular polling again even with inotify, but changes are
+usually detected immediately, and if the file exists there will be no
+polling.
+
+=over 4
+
+=item ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)
+
+=item ev_stat_set (ev_stat *, const char *path, ev_tstamp interval)
+
+Configures the watcher to wait for status changes of the given
+C<path>. The C<interval> is a hint on how quickly a change is expected to
+be detected and should normally be specified as C<0> to let libev choose
+a suitable value. The memory pointed to by C<path> must point to the same
+path for as long as the watcher is active.
+
+The callback will be receive C<EV_STAT> when a change was detected,
+relative to the attributes at the time the watcher was started (or the
+last change was detected).
+
+=item ev_stat_stat (ev_stat *)
+
+Updates the stat buffer immediately with new values. If you change the
+watched path in your callback, you could call this fucntion to avoid
+detecting this change (while introducing a race condition). Can also be
+useful simply to find out the new values.
+
+=item ev_statdata attr [read-only]
+
+The most-recently detected attributes of the file. Although the type is of
+C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
+suitable for your system. If the C<st_nlink> member is C<0>, then there
+was some error while C<stat>ing the file.
+
+=item ev_statdata prev [read-only]
+
+The previous attributes of the file. The callback gets invoked whenever
+C<prev> != C<attr>.
+
+=item ev_tstamp interval [read-only]
+
+The specified interval.
+
+=item const char *path [read-only]
+
+The filesystem path that is being watched.
+
+=back
+
+Example: Watch C</etc/passwd> for attribute changes.
+
+ static void
+ passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
+ {
+ /* /etc/passwd changed in some way */
+ if (w->attr.st_nlink)
+ {
+ printf ("passwd current size %ld\n", (long)w->attr.st_size);
+ printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);
+ printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);
+ }
+ else
+ /* you shalt not abuse printf for puts */
+ puts ("wow, /etc/passwd is not there, expect problems. "
+ "if this is windows, they already arrived\n");
+ }
+
+ ...
+ ev_stat passwd;
+
+ ev_stat_init (&passwd, passwd_cb, "/etc/passwd");
+ ev_stat_start (loop, &passwd);
+
+
=head2 C<ev_idle> - when you've got nothing better to do...
Idle watchers trigger events when there are no other events are pending
=back
-Example: dynamically allocate an C<ev_idle>, start it, and in the
-callback, free it. Alos, use no error checking, as usual.
+Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
+callback, free it. Also, use no error checking, as usual.
static void
idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)
io_cb (ev_loop *loop, ev_io *w, int revents)
{
// set the relevant poll flags
+ // could also call adns_processreadable etc. here
struct pollfd *fd = (struct pollfd *)w->data;
if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
static void
adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)
{
- int timeout = 3600000;truct pollfd fds [nfd];
+ int timeout = 3600000;
+ struct pollfd fds [nfd];
// actual code will need to loop here and realloc etc.
adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
apropriate way for embedded loops.
+=item struct ev_loop *loop [read-only]
+
+The embedded event loop.
+
+=back
+
+
+=head2 C<ev_fork> - the audacity to resume the event loop after a fork
+
+Fork watchers are called when a C<fork ()> was detected (usually because
+whoever is a good citizen cared to tell libev about it by calling
+C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the
+event loop blocks next and before C<ev_check> watchers are being called,
+and only in the child after the fork. If whoever good citizen calling
+C<ev_default_fork> cheats and calls it in the wrong process, the fork
+handlers will be invoked, too, of course.
+
+=over 4
+
+=item ev_fork_init (ev_signal *, callback)
+
+Initialises and configures the fork watcher - it has no parameters of any
+kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
+believe me.
+
=back
Invokes C<ev_embed_sweep>.
+=item w->update () C<ev::stat> only
+
+Invokes C<ev_stat_stat>.
+
=back
=back
io.start (fd, ev::READ);
}
+
+=head1 MACRO MAGIC
+
+Libev can be compiled with a variety of options, the most fundemantal is
+C<EV_MULTIPLICITY>. This option determines wether (most) functions and
+callbacks have an initial C<struct ev_loop *> argument.
+
+To make it easier to write programs that cope with either variant, the
+following macros are defined:
+
+=over 4
+
+=item C<EV_A>, C<EV_A_>
+
+This provides the loop I<argument> for functions, if one is required ("ev
+loop argument"). The C<EV_A> form is used when this is the sole argument,
+C<EV_A_> is used when other arguments are following. Example:
+
+ ev_unref (EV_A);
+ ev_timer_add (EV_A_ watcher);
+ ev_loop (EV_A_ 0);
+
+It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
+which is often provided by the following macro.
+
+=item C<EV_P>, C<EV_P_>
+
+This provides the loop I<parameter> for functions, if one is required ("ev
+loop parameter"). The C<EV_P> form is used when this is the sole parameter,
+C<EV_P_> is used when other parameters are following. Example:
+
+ // this is how ev_unref is being declared
+ static void ev_unref (EV_P);
+
+ // this is how you can declare your typical callback
+ static void cb (EV_P_ ev_timer *w, int revents)
+
+It declares a parameter C<loop> of type C<struct ev_loop *>, quite
+suitable for use with C<EV_A>.
+
+=item C<EV_DEFAULT>, C<EV_DEFAULT_>
+
+Similar to the other two macros, this gives you the value of the default
+loop, if multiple loops are supported ("ev loop default").
+
+=back
+
+Example: Declare and initialise a check watcher, utilising the above
+macros so it will work regardless of wether multiple loops are supported
+or not.
+
+ static void
+ check_cb (EV_P_ ev_timer *w, int revents)
+ {
+ ev_check_stop (EV_A_ w);
+ }
+
+ ev_check check;
+ ev_check_init (&check, check_cb);
+ ev_check_start (EV_DEFAULT_ &check);
+ ev_loop (EV_DEFAULT_ 0);
+
=head1 EMBEDDING
Libev can (and often is) directly embedded into host
ev_win32.c required on win32 platforms only
- ev_select.c only when select backend is enabled (which is by default)
+ ev_select.c only when select backend is enabled (which is enabled by default)
ev_poll.c only when poll backend is enabled (disabled by default)
ev_epoll.c only when the epoll backend is enabled (disabled by default)
ev_kqueue.c only when the kqueue backend is enabled (disabled by default)
reserved for future expansion, works like the USE symbols above.
+=item EV_USE_INOTIFY
+
+If defined to be C<1>, libev will compile in support for the Linux inotify
+interface to speed up C<ev_stat> watchers. Its actual availability will
+be detected at runtime.
+
=item EV_H
The name of the F<ev.h> header file used to include it. The default if
for multiple event loops and there is no first event loop pointer
argument. Instead, all functions act on the single default loop.
-=item EV_PERIODICS
+=item EV_PERIODIC_ENABLE
+
+If undefined or defined to be C<1>, then periodic timers are supported. If
+defined to be C<0>, then they are not. Disabling them saves a few kB of
+code.
+
+=item EV_EMBED_ENABLE
+
+If undefined or defined to be C<1>, then embed watchers are supported. If
+defined to be C<0>, then they are not.
+
+=item EV_STAT_ENABLE
+
+If undefined or defined to be C<1>, then stat watchers are supported. If
+defined to be C<0>, then they are not.
+
+=item EV_FORK_ENABLE
-If undefined or defined to be C<1>, then periodic timers are supported,
-otherwise not. This saves a few kb of code.
+If undefined or defined to be C<1>, then fork watchers are supported. If
+defined to be C<0>, then they are not.
+
+=item EV_MINIMAL
+
+If you need to shave off some kilobytes of code at the expense of some
+speed, define this symbol to C<1>. Currently only used for gcc to override
+some inlining decisions, saves roughly 30% codesize of amd64.
+
+=item EV_PID_HASHSIZE
+
+C<ev_child> watchers use a small hash table to distribute workload by
+pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
+than enough. If you need to manage thousands of children you might want to
+increase this value (I<must> be a power of two).
+
+=item EV_INOTIFY_HASHSIZE
+
+C<ev_staz> watchers use a small hash table to distribute workload by
+inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
+usually more than enough. If you need to manage thousands of C<ev_stat>
+watchers you might want to increase this value (I<must> be a power of
+two).
=item EV_COMMON
file.
The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
-that everybody includes and which overrides some autoconf choices:
+that everybody includes and which overrides some configure choices:
+ #define EV_MINIMAL 1
#define EV_USE_POLL 0
#define EV_MULTIPLICITY 0
- #define EV_PERIODICS 0
+ #define EV_PERIODIC_ENABLE 0
+ #define EV_STAT_ENABLE 0
+ #define EV_FORK_ENABLE 0
#define EV_CONFIG_H <config.h>
+ #define EV_MINPRI 0
+ #define EV_MAXPRI 0
#include "ev++.h"
#include "ev_cpp.h"
#include "ev.c"
+
+=head1 COMPLEXITIES
+
+In this section the complexities of (many of) the algorithms used inside
+libev will be explained. For complexity discussions about backends see the
+documentation for C<ev_default_init>.
+
+=over 4
+
+=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
+
+=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)
+
+=item Starting io/check/prepare/idle/signal/child watchers: O(1)
+
+=item Stopping check/prepare/idle watchers: O(1)
+
+=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
+
+=item Finding the next timer per loop iteration: O(1)
+
+=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
+
+=item Activating one watcher: O(1)
+
+=back
+
+
=head1 AUTHOR
Marc Lehmann <libev@schmorp.de>.
projects / software / libev.git / blobdiff