new patch from upstream to fix the atime issue

[software/mutt-debian.git] / doc / manual.txt

diff --git a/doc/manual.txt b/doc/manual.txt
index 10bc984c2fa58719f9982adf2508a532dce550ea..668b97c6f00865989121843e87b99dd2f519b7ee 100644 (file)
--- a/doc/manual.txt
+++ b/doc/manual.txt
@@ -1,16 +1,16 @@
 The Mutt E-Mail Client
 
 The Mutt E-Mail Client
 

-MichaelElkins
+Michael Elkins

 
 <me@cs.hmc.edu>
 
 
 <me@cs.hmc.edu>
 

-version 1.5.18 (2008-05-17)
+version 1.5.20 (2009-06-14)

 
 Abstract
 
 
 Abstract
 

-``All mail clients suck. This one just sucks less.'' -me, circa 1995
+?All mail clients suck. This one just sucks less.? ? me, circa 1995

 
 

-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+-------------------------------------------------------------------------------

 
 Table of Contents
 
 
 Table of Contents
 


@@ -18,74 +18,93 @@ Table of Contents
 
     1. Mutt Home Page
     2. Mailing Lists
 
     1. Mutt Home Page
     2. Mailing Lists

-    3. Software Distribution Sites
-    4. IRC
-    5. USENET
-    6. Copyright
+    3. Getting Mutt
+    4. Mutt Online Resources
+    5. Contributing to Mutt
+    6. Typograhical Conventions
+    7. Copyright

 
 2. Getting Started
 
 
 2. Getting Started
 

-    1. Moving Around in Menus
-    2. Editing Input Fields
+    1. Core Concepts
+    2. Screens and Menus

 
 

-        2.1. Introduction
-        2.2. History
+        2.1. Index
+        2.2. Pager
+        2.3. File Browser
+        2.4. Help
+        2.5. Compose Menu
+        2.6. Alias Menu
+        2.7. Attachment Menu

 
 

-    3. Reading Mail - The Index and Pager
+    3. Moving Around in Menus
+    4. Editing Input Fields

 
 

-        3.1. The Message Index
-        3.2. The Pager
-        3.3. Threaded Mode
-        3.4. Miscellaneous Functions
+        4.1. Introduction
+        4.2. History

 
 

-    4. Sending Mail
+    5. Reading Mail

 
 

-        4.1. Editing the message header
-        4.2. Using Mutt with PGP
-        4.3. Sending anonymous messages via mixmaster.
-        4.4. Sending format=flowed messages
+        5.1. The Message Index
+        5.2. The Pager
+        5.3. Threaded Mode
+        5.4. Miscellaneous Functions

 
 

-    5. Forwarding and Bouncing Mail
-    6. Postponing Mail
+    6. Sending Mail
+
+        6.1. Introduction
+        6.2. Editing the Message Header
+        6.3. Sending Cryptographically Signed/Encrypted Messages
+        6.4. Sending Format=Flowed Messages
+
+    7. Forwarding and Bouncing Mail
+    8. Postponing Mail

 
 3. Configuration
 
 
 3. Configuration
 

-    1. Syntax of Initialization Files
-    2. Address groups
-    3. Defining/Using aliases
-    4. Changing the default key bindings
-    5. Defining aliases for character sets
-    6. Setting variables based upon mailbox
-    7. Keyboard macros
-    8. Using color and mono video attributes
-    9. Ignoring (weeding) unwanted message headers
-    10. Alternative addresses
-    11. Mailing lists
-    12. Using Multiple spool mailboxes
-    13. Monitoring incoming mail
-    14. User defined headers
-    15. Defining the order of headers when viewing messages
-    16. Specify default save mailbox
-    17. Specify default Fcc: mailbox when composing
-    18. Specify default save filename and default Fcc: mailbox at once
-    19. Change settings based upon message recipients
-    20. Change settings before formatting a message
-    21. Choosing the cryptographic key of the recipient
-    22. Adding key sequences to the keyboard buffer
-    23. Executing functions
+    1. Location of Initialization Files
+    2. Syntax of Initialization Files
+    3. Address Groups
+    4. Defining/Using Aliases
+    5. Changing the Default Key Bindings
+    6. Defining Aliases for Character Sets
+    7. Setting Variables Based Upon Mailbox
+    8. Keyboard Macros
+    9. Using Color and Mono Video Attributes
+    10. Message Header Display
+
+        10.1. Selecting Headers
+        10.2. Ordering Displayed Headers
+
+    11. Alternative Addresses
+    12. Mailing Lists
+    13. Using Multiple Spool Mailboxes
+    14. Monitoring Incoming Mail
+    15. User-Defined Headers
+    16. Specify Default Save Mailbox
+    17. Specify Default Fcc: Mailbox When Composing
+    18. Specify Default Save Filename and Default Fcc: Mailbox at Once
+    19. Change Settings Based Upon Message Recipients
+    20. Change Settings Before Formatting a Message
+    21. Choosing the Cryptographic Key of the Recipient
+    22. Adding Key Sequences to the Keyboard Buffer
+    23. Executing Functions

     24. Message Scoring
     24. Message Scoring

-    25. Spam detection
+    25. Spam Detection

     26. Setting and Querying Variables
 
     26. Setting and Querying Variables
 

-        26.1. Commands
-        26.2. User-defined variables
+        26.1. Variable Types
+        26.2. Commands
+        26.3. User-Defined Variables

 
 

-    27. Reading initialization commands from another file
-    28. Removing hooks
+    27. Reading Initialization Commands From Another File
+    28. Removing Hooks

     29. Format Strings
 
         29.1. Basic usage
     29. Format Strings
 
         29.1. Basic usage

-        29.2. Filters
+        29.2. Conditionals
+        29.3. Filters
+        29.4. Padding

 
 4. Advanced Usage
 
 
 4. Advanced Usage
 


@@ -93,8 +112,8 @@ Table of Contents
     2. Patterns: Searching, Limiting and Tagging
 
         2.1. Pattern Modifier
     2. Patterns: Searching, Limiting and Tagging
 
         2.1. Pattern Modifier

-        2.2. Simple Patterns
-        2.3. Complex Patterns
+        2.2. Simple Searches
+        2.3. Nesting and Boolean Operators

         2.4. Searching by Date
 
     3. Using Tags
         2.4. Searching by Date
 
     3. Using Tags


@@ -106,70 +125,84 @@ Table of Contents
     6. Mailbox Formats
     7. Mailbox Shortcuts
     8. Handling Mailing Lists
     6. Mailbox Formats
     7. Mailbox Shortcuts
     8. Handling Mailing Lists

-    9. Editing threads
+    9. Handling multiple folders
+    10. Editing Threads

 
 

-        9.1. Linking threads
-        9.2. Breaking threads
+        10.1. Linking Threads
+        10.2. Breaking Threads

 
 

-    10. Delivery Status Notification (DSN) Support
-    11. Start a WWW Browser on URLs (EXTERNAL)
+    11. Delivery Status Notification (DSN) Support
+    12. Start a WWW Browser on URLs
+    13. Miscellany

 
 5. Mutt's MIME Support
 
     1. Using MIME in Mutt
 
 
 5. Mutt's MIME Support
 
     1. Using MIME in Mutt
 

-        1.1. Viewing MIME messages in the pager
+        1.1. Viewing MIME Messages in the Pager

         1.2. The Attachment Menu
         1.3. The Compose Menu
 
         1.2. The Attachment Menu
         1.3. The Compose Menu
 

-    2. MIME Type configuration with mime.types
-    3. MIME Viewer configuration with mailcap
+    2. MIME Type Configuration with mime.types
+    3. MIME Viewer Configuration with Mailcap

 
 

-        3.1. The Basics of the mailcap file
-        3.2. Secure use of mailcap
-        3.3. Advanced mailcap Usage
-        3.4. Example mailcap files
+        3.1. The Basics of the Mailcap File
+        3.2. Secure Use of Mailcap
+        3.3. Advanced Mailcap Usage
+        3.4. Example Mailcap Files

 
     4. MIME Autoview
     5. MIME Multipart/Alternative
     6. Attachment Searching and Counting
     7. MIME Lookup
 
 
     4. MIME Autoview
     5. MIME Multipart/Alternative
     6. Attachment Searching and Counting
     7. MIME Lookup
 

-6. Optional features
+6. Optional Features

 
 

-    1. General notes
+    1. General Notes

 
 

-        1.1. Enabling/disabling features
-        1.2. URL syntax
+        1.1. Enabling/Disabling Features
+        1.2. URL Syntax

 
     2. SSL/TLS Support
     3. POP3 Support
     4. IMAP Support
 
 
     2. SSL/TLS Support
     3. POP3 Support
     4. IMAP Support
 

-        4.1. The Folder Browser
+        4.1. The IMAP Folder Browser

         4.2. Authentication
 
     5. SMTP Support
         4.2. Authentication
 
     5. SMTP Support

-    6. Managing multiple accounts
-    7. Local caching
+    6. Managing Multiple Accounts
+    7. Local Caching

 
 

-        7.1. Header caching
-        7.2. Body caching
+        7.1. Header Caching
+        7.2. Body Caching

         7.3. Maintenance
 
         7.3. Maintenance
 

-    8. Exact address generation
+    8. Exact Address Generation
+    9. Sending Anonymous Messages via Mixmaster
+
+7. Security Considerations
+
+    1. Passwords
+    2. Temporary Files
+    3. Information Leaks

 
 

-7. Performance tuning
+        3.1. Message-Id: headers
+        3.2. mailto:-style Links

 
 

-    1. Reading and writing mailboxes
-    2. Reading messages from remote folders
-    3. Searching and limiting
+    4. External Applications

 
 

-8. Reference
+8. Performance Tuning

 
 

-    1. Command line options
+    1. Reading and Writing Mailboxes
+    2. Reading Messages from Remote Folders
+    3. Searching and Limiting
+
+9. Reference
+
+    1. Command-Line Options

     2. Configuration Commands
     2. Configuration Commands

-    3. Configuration variables
+    3. Configuration Variables

 
         3.1. abort_nosubject
         3.2. abort_unmodified
 
         3.1. abort_nosubject
         3.2. abort_unmodified


@@ -187,18 +220,18 @@ Table of Contents
         3.14. attach_sep
         3.15. attach_split
         3.16. attribution
         3.14. attach_sep
         3.15. attach_split
         3.16. attribution

-        3.17. autoedit
-        3.18. auto_tag
+        3.17. auto_tag
+        3.18. autoedit

         3.19. beep
         3.20. beep_new
         3.21. bounce
         3.22. bounce_delivered
         3.23. braille_friendly
         3.19. beep
         3.20. beep_new
         3.21. bounce
         3.22. bounce_delivered
         3.23. braille_friendly

-        3.24. check_mbox_size
+        3.24. certificate_file

         3.25. charset
         3.25. charset

-        3.26. check_new
-        3.27. collapse_unread
-        3.28. uncollapse_jump
+        3.26. check_mbox_size
+        3.27. check_new
+        3.28. collapse_unread

         3.29. compose_format
         3.30. config_charset
         3.31. confirmappend
         3.29. compose_format
         3.30. config_charset
         3.31. confirmappend


@@ -206,329 +239,367 @@ Table of Contents
         3.33. connect_timeout
         3.34. content_type
         3.35. copy
         3.33. connect_timeout
         3.34. content_type
         3.35. copy

-        3.36. crypt_use_gpgme
-        3.37. crypt_use_pka
-        3.38. crypt_autopgp
+        3.36. crypt_autoencrypt
+        3.37. crypt_autopgp
+        3.38. crypt_autosign

         3.39. crypt_autosmime
         3.39. crypt_autosmime

-        3.40. date_format
-        3.41. default_hook
-        3.42. delete
-        3.43. delete_untag
-        3.44. digest_collapse
-        3.45. display_filter
-        3.46. dotlock_program
-        3.47. dsn_notify
-        3.48. dsn_return
-        3.49. duplicate_threads
-        3.50. edit_headers
-        3.51. editor
-        3.52. encode_from
-        3.53. envelope_from_address
-        3.54. escape
-        3.55. fast_reply
-        3.56. fcc_attach
-        3.57. fcc_clear
-        3.58. folder
-        3.59. folder_format
-        3.60. followup_to
-        3.61. force_name
-        3.62. forward_decode
-        3.63. forward_edit
-        3.64. forward_format
-        3.65. forward_quote
-        3.66. from
-        3.67. gecos_mask
-        3.68. hdrs
-        3.69. header
-        3.70. help
-        3.71. hidden_host
-        3.72. hide_limited
-        3.73. hide_missing
-        3.74. hide_thread_subject
-        3.75. hide_top_limited
-        3.76. hide_top_missing
-        3.77. history
-        3.78. history_file
-        3.79. honor_followup_to
-        3.80. hostname
-        3.81. ignore_linear_white_space
-        3.82. ignore_list_reply_to
-        3.83. imap_authenticators
-        3.84. imap_check_subscribed
-        3.85. imap_delim_chars
-        3.86. imap_headers
-        3.87. imap_idle
-        3.88. imap_keepalive
-        3.89. imap_list_subscribed
-        3.90. imap_login
-        3.91. imap_pass
-        3.92. imap_passive
-        3.93. imap_peek
-        3.94. imap_servernoise
-        3.95. imap_user
-        3.96. implicit_autoview
-        3.97. include
-        3.98. include_onlyfirst
-        3.99. indent_string
-        3.100. index_format
-        3.101. ispell
-        3.102. keep_flagged
-        3.103. locale
-        3.104. mail_check
-        3.105. mailcap_path
-        3.106. mailcap_sanitize
-        3.107. header_cache
-        3.108. maildir_header_cache_verify
-        3.109. header_cache_pagesize
-        3.110. header_cache_compress
-        3.111. maildir_trash
-        3.112. mark_old
-        3.113. markers
-        3.114. mask
-        3.115. mbox
-        3.116. mbox_type
-        3.117. metoo
-        3.118. menu_context
-        3.119. menu_move_off
-        3.120. menu_scroll
-        3.121. meta_key
-        3.122. mh_purge
-        3.123. mh_seq_flagged
-        3.124. mh_seq_replied
-        3.125. mh_seq_unseen
-        3.126. mime_forward
-        3.127. mime_forward_decode
-        3.128. mime_forward_rest
-        3.129. mix_entry_format
-        3.130. mixmaster
-        3.131. move
+        3.40. crypt_replyencrypt
+        3.41. crypt_replysign
+        3.42. crypt_replysignencrypted
+        3.43. crypt_timestamp
+        3.44. crypt_use_gpgme
+        3.45. crypt_use_pka
+        3.46. crypt_verify_sig
+        3.47. date_format
+        3.48. default_hook
+        3.49. delete
+        3.50. delete_untag
+        3.51. digest_collapse
+        3.52. display_filter
+        3.53. dotlock_program
+        3.54. dsn_notify
+        3.55. dsn_return
+        3.56. duplicate_threads
+        3.57. edit_headers
+        3.58. editor
+        3.59. encode_from
+        3.60. entropy_file
+        3.61. envelope_from_address
+        3.62. escape
+        3.63. fast_reply
+        3.64. fcc_attach
+        3.65. fcc_clear
+        3.66. folder
+        3.67. folder_format
+        3.68. followup_to
+        3.69. force_name
+        3.70. forward_decode
+        3.71. forward_decrypt
+        3.72. forward_edit
+        3.73. forward_format
+        3.74. forward_quote
+        3.75. from
+        3.76. gecos_mask
+        3.77. hdrs
+        3.78. header
+        3.79. header_cache
+        3.80. header_cache_compress
+        3.81. header_cache_pagesize
+        3.82. help
+        3.83. hidden_host
+        3.84. hide_limited
+        3.85. hide_missing
+        3.86. hide_thread_subject
+        3.87. hide_top_limited
+        3.88. hide_top_missing
+        3.89. history
+        3.90. history_file
+        3.91. honor_disposition
+        3.92. honor_followup_to
+        3.93. hostname
+        3.94. ignore_linear_white_space
+        3.95. ignore_list_reply_to
+        3.96. imap_authenticators
+        3.97. imap_check_subscribed
+        3.98. imap_delim_chars
+        3.99. imap_headers
+        3.100. imap_idle
+        3.101. imap_keepalive
+        3.102. imap_list_subscribed
+        3.103. imap_login
+        3.104. imap_pass
+        3.105. imap_passive
+        3.106. imap_peek
+        3.107. imap_pipeline_depth
+        3.108. imap_servernoise
+        3.109. imap_user
+        3.110. implicit_autoview
+        3.111. include
+        3.112. include_onlyfirst
+        3.113. indent_string
+        3.114. index_format
+        3.115. ispell
+        3.116. keep_flagged
+        3.117. locale
+        3.118. mail_check
+        3.119. mailcap_path
+        3.120. mailcap_sanitize
+        3.121. maildir_header_cache_verify
+        3.122. maildir_trash
+        3.123. mark_old
+        3.124. markers
+        3.125. mask
+        3.126. mbox
+        3.127. mbox_type
+        3.128. menu_context
+        3.129. menu_move_off
+        3.130. menu_scroll
+        3.131. message_cache_clean

         3.132. message_cachedir
         3.132. message_cachedir

-        3.133. message_cache_clean
-        3.134. message_format
-        3.135. narrow_tree
-        3.136. net_inc
-        3.137. pager
-        3.138. pager_context
-        3.139. pager_format
-        3.140. pager_index_lines
-        3.141. pager_stop
-        3.142. crypt_autosign
-        3.143. crypt_autoencrypt
-        3.144. pgp_ignore_subkeys
-        3.145. crypt_replyencrypt
-        3.146. crypt_replysign
-        3.147. crypt_replysignencrypted
-        3.148. crypt_timestamp
-        3.149. pgp_use_gpg_agent
-        3.150. crypt_verify_sig
-        3.151. smime_is_default
-        3.152. smime_ask_cert_label
-        3.153. smime_decrypt_use_default_key
-        3.154. pgp_entry_format
-        3.155. pgp_good_sign
-        3.156. pgp_check_exit
-        3.157. pgp_long_ids
-        3.158. pgp_retainable_sigs
-        3.159. pgp_autoinline
-        3.160. pgp_replyinline
-        3.161. pgp_show_unusable
-        3.162. pgp_sign_as
-        3.163. pgp_strict_enc
-        3.164. pgp_timeout
-        3.165. pgp_sort_keys
-        3.166. pgp_mime_auto
-        3.167. pgp_auto_decode
-        3.168. pgp_decode_command
-        3.169. pgp_getkeys_command
-        3.170. pgp_verify_command
-        3.171. pgp_decrypt_command
-        3.172. pgp_clearsign_command
-        3.173. pgp_sign_command
-        3.174. pgp_encrypt_sign_command
-        3.175. pgp_encrypt_only_command
-        3.176. pgp_import_command
-        3.177. pgp_export_command
-        3.178. pgp_verify_key_command
-        3.179. pgp_list_secring_command
-        3.180. pgp_list_pubring_command
-        3.181. forward_decrypt
-        3.182. smime_timeout
-        3.183. smime_encrypt_with
-        3.184. smime_keys
-        3.185. smime_ca_location
-        3.186. smime_certificates
-        3.187. smime_decrypt_command
-        3.188. smime_verify_command
-        3.189. smime_verify_opaque_command
-        3.190. smime_sign_command
-        3.191. smime_sign_opaque_command
-        3.192. smime_encrypt_command
-        3.193. smime_pk7out_command
-        3.194. smime_get_cert_command
-        3.195. smime_get_signer_cert_command
-        3.196. smime_import_cert_command
-        3.197. smime_get_cert_email_command
-        3.198. smime_default_key
-        3.199. ssl_client_cert
-        3.200. ssl_force_tls
-        3.201. ssl_starttls
-        3.202. certificate_file
-        3.203. ssl_usesystemcerts
-        3.204. entropy_file
-        3.205. ssl_use_sslv2
-        3.206. ssl_use_sslv3
-        3.207. ssl_use_tlsv1
-        3.208. ssl_min_dh_prime_bits
-        3.209. ssl_ca_certificates_file
-        3.210. pipe_split
-        3.211. pipe_decode
-        3.212. pipe_sep
-        3.213. pop_authenticators
-        3.214. pop_auth_try_all
-        3.215. pop_checkinterval
-        3.216. pop_delete
-        3.217. pop_host
-        3.218. pop_last
-        3.219. pop_reconnect
-        3.220. pop_user
-        3.221. pop_pass
-        3.222. post_indent_string
-        3.223. postpone
-        3.224. postponed
-        3.225. preconnect
-        3.226. print
-        3.227. print_command
-        3.228. print_decode
-        3.229. print_split
-        3.230. prompt_after
-        3.231. query_command
-        3.232. query_format
-        3.233. quit
-        3.234. quote_regexp
-        3.235. read_inc
-        3.236. read_only
-        3.237. realname
-        3.238. recall
-        3.239. record
-        3.240. reply_regexp
-        3.241. reply_self
-        3.242. reply_to
-        3.243. resolve
-        3.244. reverse_alias
-        3.245. reverse_name
-        3.246. reverse_realname
-        3.247. rfc2047_parameters
-        3.248. save_address
-        3.249. save_empty
-        3.250. save_history
-        3.251. save_name
-        3.252. score
-        3.253. score_threshold_delete
-        3.254. score_threshold_flag
-        3.255. score_threshold_read
-        3.256. send_charset
-        3.257. sendmail
-        3.258. sendmail_wait
-        3.259. shell
-        3.260. sig_dashes
-        3.261. sig_on_top
-        3.262. signature
-        3.263. simple_search
-        3.264. smart_wrap
-        3.265. smileys
-        3.266. sleep_time
-        3.267. smtp_authenticators
-        3.268. smtp_pass
-        3.269. smtp_url
-        3.270. sort
-        3.271. sort_alias
-        3.272. sort_aux
-        3.273. sort_browser
-        3.274. sort_re
-        3.275. spam_separator
-        3.276. spoolfile
-        3.277. status_chars
-        3.278. status_format
-        3.279. status_on_top
-        3.280. strict_threads
-        3.281. suspend
-        3.282. text_flowed
-        3.283. thread_received
-        3.284. thorough_search
-        3.285. tilde
-        3.286. time_inc
-        3.287. timeout
-        3.288. tmpdir
-        3.289. to_chars
-        3.290. tunnel
-        3.291. use_8bitmime
-        3.292. use_domain
-        3.293. use_envelope_from
-        3.294. use_from
-        3.295. use_idn
-        3.296. use_ipv6
-        3.297. user_agent
-        3.298. visual
-        3.299. wait_key
-        3.300. weed
-        3.301. wrap
-        3.302. wrap_search
-        3.303. wrapmargin
-        3.304. write_inc
-        3.305. write_bcc
+        3.133. message_format
+        3.134. meta_key
+        3.135. metoo
+        3.136. mh_purge
+        3.137. mh_seq_flagged
+        3.138. mh_seq_replied
+        3.139. mh_seq_unseen
+        3.140. mime_forward
+        3.141. mime_forward_decode
+        3.142. mime_forward_rest
+        3.143. mix_entry_format
+        3.144. mixmaster
+        3.145. move
+        3.146. narrow_tree
+        3.147. net_inc
+        3.148. pager
+        3.149. pager_context
+        3.150. pager_format
+        3.151. pager_index_lines
+        3.152. pager_stop
+        3.153. pgp_auto_decode
+        3.154. pgp_autoinline
+        3.155. pgp_check_exit
+        3.156. pgp_clearsign_command
+        3.157. pgp_decode_command
+        3.158. pgp_decrypt_command
+        3.159. pgp_encrypt_only_command
+        3.160. pgp_encrypt_sign_command
+        3.161. pgp_entry_format
+        3.162. pgp_export_command
+        3.163. pgp_getkeys_command
+        3.164. pgp_good_sign
+        3.165. pgp_ignore_subkeys
+        3.166. pgp_import_command
+        3.167. pgp_list_pubring_command
+        3.168. pgp_list_secring_command
+        3.169. pgp_long_ids
+        3.170. pgp_mime_auto
+        3.171. pgp_replyinline
+        3.172. pgp_retainable_sigs
+        3.173. pgp_show_unusable
+        3.174. pgp_sign_as
+        3.175. pgp_sign_command
+        3.176. pgp_sort_keys
+        3.177. pgp_strict_enc
+        3.178. pgp_timeout
+        3.179. pgp_use_gpg_agent
+        3.180. pgp_verify_command
+        3.181. pgp_verify_key_command
+        3.182. pipe_decode
+        3.183. pipe_sep
+        3.184. pipe_split
+        3.185. pop_auth_try_all
+        3.186. pop_authenticators
+        3.187. pop_checkinterval
+        3.188. pop_delete
+        3.189. pop_host
+        3.190. pop_last
+        3.191. pop_pass
+        3.192. pop_reconnect
+        3.193. pop_user
+        3.194. post_indent_string
+        3.195. postpone
+        3.196. postponed
+        3.197. preconnect
+        3.198. print
+        3.199. print_command
+        3.200. print_decode
+        3.201. print_split
+        3.202. prompt_after
+        3.203. query_command
+        3.204. query_format
+        3.205. quit
+        3.206. quote_regexp
+        3.207. read_inc
+        3.208. read_only
+        3.209. realname
+        3.210. recall
+        3.211. record
+        3.212. reply_regexp
+        3.213. reply_self
+        3.214. reply_to
+        3.215. resolve
+        3.216. reverse_alias
+        3.217. reverse_name
+        3.218. reverse_realname
+        3.219. rfc2047_parameters
+        3.220. save_address
+        3.221. save_empty
+        3.222. save_history
+        3.223. save_name
+        3.224. score
+        3.225. score_threshold_delete
+        3.226. score_threshold_flag
+        3.227. score_threshold_read
+        3.228. search_context
+        3.229. send_charset
+        3.230. sendmail
+        3.231. sendmail_wait
+        3.232. shell
+        3.233. sig_dashes
+        3.234. sig_on_top
+        3.235. signature
+        3.236. simple_search
+        3.237. sleep_time
+        3.238. smart_wrap
+        3.239. smileys
+        3.240. smime_ask_cert_label
+        3.241. smime_ca_location
+        3.242. smime_certificates
+        3.243. smime_decrypt_command
+        3.244. smime_decrypt_use_default_key
+        3.245. smime_default_key
+        3.246. smime_encrypt_command
+        3.247. smime_encrypt_with
+        3.248. smime_get_cert_command
+        3.249. smime_get_cert_email_command
+        3.250. smime_get_signer_cert_command
+        3.251. smime_import_cert_command
+        3.252. smime_is_default
+        3.253. smime_keys
+        3.254. smime_pk7out_command
+        3.255. smime_sign_command
+        3.256. smime_sign_opaque_command
+        3.257. smime_timeout
+        3.258. smime_verify_command
+        3.259. smime_verify_opaque_command
+        3.260. smtp_authenticators
+        3.261. smtp_pass
+        3.262. smtp_url
+        3.263. sort
+        3.264. sort_alias
+        3.265. sort_aux
+        3.266. sort_browser
+        3.267. sort_re
+        3.268. spam_separator
+        3.269. spoolfile
+        3.270. ssl_ca_certificates_file
+        3.271. ssl_client_cert
+        3.272. ssl_force_tls
+        3.273. ssl_min_dh_prime_bits
+        3.274. ssl_starttls
+        3.275. ssl_use_sslv2
+        3.276. ssl_use_sslv3
+        3.277. ssl_use_tlsv1
+        3.278. ssl_usesystemcerts
+        3.279. ssl_verify_dates
+        3.280. ssl_verify_host
+        3.281. status_chars
+        3.282. status_format
+        3.283. status_on_top
+        3.284. strict_threads
+        3.285. suspend
+        3.286. text_flowed
+        3.287. thorough_search
+        3.288. thread_received
+        3.289. tilde
+        3.290. time_inc
+        3.291. timeout
+        3.292. tmpdir
+        3.293. to_chars
+        3.294. tunnel
+        3.295. uncollapse_jump
+        3.296. use_8bitmime
+        3.297. use_domain
+        3.298. use_envelope_from
+        3.299. use_from
+        3.300. use_idn
+        3.301. use_ipv6
+        3.302. user_agent
+        3.303. visual
+        3.304. wait_key
+        3.305. weed
+        3.306. wrap
+        3.307. wrap_search
+        3.308. wrapmargin
+        3.309. write_bcc
+        3.310. write_inc

 
     4. Functions
 
 
     4. Functions
 

-        4.1. generic
-        4.2. index
-        4.3. pager
-        4.4. alias
-        4.5. query
-        4.6. attach
-        4.7. compose
-        4.8. postpone
-        4.9. browser
-        4.10. pgp
-        4.11. smime
-        4.12. mix
-        4.13. editor
-
-9. Miscellany
+        4.1. Generic Menu
+        4.2. Index Menu
+        4.3. Pager Menu
+        4.4. Alias Menu
+        4.5. Query Menu
+        4.6. Attach Menu
+        4.7. Compose Menu
+        4.8. Postpone Menu
+        4.9. Browser Menu
+        4.10. Pgp Menu
+        4.11. Smime Menu
+        4.12. Mix Menu
+        4.13. Editor Menu
+
+10. Miscellany

 
     1. Acknowledgements
 
     1. Acknowledgements

-    2. About this document
+    2. About This Document

 
 List of Tables
 
 
 List of Tables
 

-2.1. Most common navigation keys
-2.2. Most common line editor keys
-2.3. Most common message index keys
-2.4. Most common pager keys
-2.5. ANSI escape sequences
-2.6. Color sequences
-2.7. Most common thread mode keys
-2.8. Most common mail sending keys
-2.9. Most common compose menu keys
-2.10. PGP key menu flags
-2.11. Message forwarding/bouncing keys
+1.1. Typographical conventions for special terms
+2.1. Most common navigation keys in entry-based menus
+2.2. Most common navigation keys in page-based menus
+2.3. Most common line editor keys
+2.4. Most common message index keys
+2.5. Message status flags
+2.6. Message recipient flags
+2.7. Most common pager keys
+2.8. ANSI escape sequences
+2.9. Color sequences
+2.10. Most common thread mode keys
+2.11. Most common mail sending keys
+2.12. Most common compose menu keys
+2.13. PGP key menu flags

 3.1. Symbolic key names
 3.1. Symbolic key names

-4.1. Pattern modifiers
-4.2. Simple search keywords
-4.3. Date units
-8.1. Command line options
-8.2. Default generic function bindings
-8.3. Default index function bindings
-8.4. Default pager function bindings
-8.5. Default alias function bindings
-8.6. Default query function bindings
-8.7. Default attach function bindings
-8.8. Default compose function bindings
-8.9. Default postpone function bindings
-8.10. Default browser function bindings
-8.11. Default pgp function bindings
-8.12. Default smime function bindings
-8.13. Default mix function bindings
-8.14. Default editor function bindings
+4.1. POSIX regular expression character classes
+4.2. Regular expression repetition operators
+4.3. GNU regular expression extensions
+4.4. Pattern modifiers
+4.5. Simple search keywords
+4.6. Date units
+9.1. Command line options
+9.2. Default generic Function Bindings
+9.3. Default index Function Bindings
+9.4. Default pager Function Bindings
+9.5. Default alias Function Bindings
+9.6. Default query Function Bindings
+9.7. Default attach Function Bindings
+9.8. Default compose Function Bindings
+9.9. Default postpone Function Bindings
+9.10. Default browser Function Bindings
+9.11. Default pgp Function Bindings
+9.12. Default smime Function Bindings
+9.13. Default mix Function Bindings
+9.14. Default editor Function Bindings
+
+List of Examples
+
+3.1. Multiple configuration commands per line
+3.2. Commenting configuration files
+3.3. Escaping quotes in congfiguration files
+3.4. Splitting long configuration commands over several lines
+3.5. Using external command's output in configuration files
+3.6. Using environment variables in configuration files
+3.7. Configuring external alias files
+3.8. Setting sort method based on mailbox name
+3.9. Header weeding
+3.10. Configuring header display order
+3.11. Defining custom headers
+3.12. Using %-expandos in save-hook
+3.13. Embedding push in folder-hook
+3.14. Configuring spam detection
+3.15. Using user-defined variables for config file readability
+3.16. Using user-defined variables for backing up other config option values
+3.17. Deferring user-defined variable expansion to runtime
+3.18. Using external filters in format strings
+4.1. Matching all addresses in address lists
+4.2. Using boolean operators in patterns
+4.3. Specifying a default hook
+5.1. Attachment counting
+6.1. URLs
+6.2. Managing multiple accounts

 
 Chapter 1. Introduction
 
 
 Chapter 1. Introduction
 


@@ -536,10 +607,11 @@ Table of Contents
 
 1. Mutt Home Page
 2. Mailing Lists
 
 1. Mutt Home Page
 2. Mailing Lists

-3. Software Distribution Sites
-4. IRC
-5. USENET
-6. Copyright
+3. Getting Mutt
+4. Mutt Online Resources
+5. Contributing to Mutt
+6. Typograhical Conventions
+7. Copyright

 
 Mutt is a small but very powerful text-based MIME mail client. Mutt is highly
 configurable, and is well suited to the mail power user with advanced features
 
 Mutt is a small but very powerful text-based MIME mail client. Mutt is highly
 configurable, and is well suited to the mail power user with advanced features


@@ -548,40 +620,100 @@ and a powerful pattern matching language for selecting groups of messages.
 
 1. Mutt Home Page
 
 
 1. Mutt Home Page
 

-http://www.mutt.org/
+The official homepage can be found at http://www.mutt.org/.

 
 2. Mailing Lists
 
 To subscribe to one of the following mailing lists, send a message with the
 word subscribe in the body to list-name-request@mutt.org.
 
 
 2. Mailing Lists
 
 To subscribe to one of the following mailing lists, send a message with the
 word subscribe in the body to list-name-request@mutt.org.
 

-  ● <mutt-announce-request@mutt.org> -- low traffic list for announcements
+  * <mutt-announce-request@mutt.org> -- low traffic list for announcements

 
 

-  ● <mutt-users-request@mutt.org> -- help, bug reports and feature requests
+  * <mutt-users-request@mutt.org> -- help, bug reports and feature requests

 
 

-  ● <mutt-dev-request@mutt.org> -- development mailing list
+  * <mutt-dev-request@mutt.org> -- development mailing list

 
 

-Note: all messages posted to mutt-announce are automatically forwarded to
-mutt-users, so you do not need to be subscribed to both lists.
+Note

 
 

-3. Software Distribution Sites
+All messages posted to mutt-announce are automatically forwarded to mutt-users,
+so you do not need to be subscribed to both lists.

 
 

-  ● ftp://ftp.mutt.org/mutt/
+3. Getting Mutt

 
 

-For a list of mirror sites, please refer to http://www.mutt.org/download.html.
+Mutt releases can be downloaded from ftp://ftp.mutt.org/mutt/. For a list of
+mirror sites, please refer to http://www.mutt.org/download.html.

 
 

-4. IRC
+For nightly tarballs and version control access, please refer to the Mutt
+development site.

 
 

-Visit channel #mutt on irc.freenode.net to chat with other people interested in
-Mutt.
+4. Mutt Online Resources
+
+Bug Tracking System
+
+    The official Mutt bug tracking system can be found at http://bugs.mutt.org/
+
+Wiki
+
+    An (unofficial) wiki can be found at http://wiki.mutt.org/.
+
+IRC
+
+    For the IRC user community, visit channel #mutt on irc.freenode.net.
+
+USENET
+
+    For USENET, see the newsgroup comp.mail.mutt.
+
+5. Contributing to Mutt

 
 

-5. USENET
+There are various ways to contribute to the Mutt project.

 
 

-See the newsgroup comp.mail.mutt.
+Especially for new users it may be helpful to meet other new and experienced
+users to chat about Mutt, talk about problems and share tricks.

 
 

-6. Copyright
+Since translations of Mutt into other languages are highly appreciated, the
+Mutt developers always look for skilled translators that help improve and
+continue to maintain stale translations.

 
 

-Mutt is Copyright (C) 1996-2005 Michael R. Elkins <me@cs.hmc.edu> and others
+For contributing code patches for new features and bug fixes, please refer to
+the developer pages at http://dev.mutt.org/ for more details.
+
+6. Typograhical Conventions
+
+This section lists typographical conventions followed throughout this manual.
+See table Table 1.1, ?Typographical conventions for special terms? for
+typographical conventions for special terms.
+
+Table 1.1. Typographical conventions for special terms
+
++------------------------------------------------------+
+|     Item     |             Refers to...              |
+|--------------+---------------------------------------|
+|printf(3)     |UNIX manual pages, execute man 3 printf|
+|--------------+---------------------------------------|
+|<PageUp>      |named keys                             |
+|--------------+---------------------------------------|
+|<create-alias>|named Mutt function                    |
+|--------------+---------------------------------------|
+|^G            |Control+G key combination              |
+|--------------+---------------------------------------|
+|$mail_check   |Mutt configuration option              |
+|--------------+---------------------------------------|
+|$HOME         |environment variable                   |
++------------------------------------------------------+
+
+
+Examples are presented as:
+
+mutt -v
+
+Within command synopsis, curly brackets (?{}?) denote a set of options of which
+one is mandatory, square brackets (?[]?) denote optional arguments, three dots
+denote that the argument may be repeated arbitrary times.
+
+7. Copyright
+
+Mutt is Copyright ? 1996-2009 Michael R. Elkins <me@mutt.org> and others.

 
 This program is free software; you can redistribute it and/or modify it under
 the terms of the GNU General Public License as published by the Free Software
 
 This program is free software; you can redistribute it and/or modify it under
 the terms of the GNU General Public License as published by the Free Software


@@ -600,832 +732,1008 @@ Chapter 2. Getting Started
 
 Table of Contents
 
 
 Table of Contents
 

-1. Moving Around in Menus
-2. Editing Input Fields
+1. Core Concepts
+2. Screens and Menus
+
+    2.1. Index
+    2.2. Pager
+    2.3. File Browser
+    2.4. Help
+    2.5. Compose Menu
+    2.6. Alias Menu
+    2.7. Attachment Menu
+
+3. Moving Around in Menus
+4. Editing Input Fields

 
 

-    2.1. Introduction
-    2.2. History
+    4.1. Introduction
+    4.2. History

 
 

-3. Reading Mail - The Index and Pager
+5. Reading Mail

 
 

-    3.1. The Message Index
-    3.2. The Pager
-    3.3. Threaded Mode
-    3.4. Miscellaneous Functions
+    5.1. The Message Index
+    5.2. The Pager
+    5.3. Threaded Mode
+    5.4. Miscellaneous Functions

 
 

-4. Sending Mail
+6. Sending Mail

 
 

-    4.1. Editing the message header
-    4.2. Using Mutt with PGP
-    4.3. Sending anonymous messages via mixmaster.
-    4.4. Sending format=flowed messages
+    6.1. Introduction
+    6.2. Editing the Message Header
+    6.3. Sending Cryptographically Signed/Encrypted Messages
+    6.4. Sending Format=Flowed Messages

 
 

-5. Forwarding and Bouncing Mail
-6. Postponing Mail
+7. Forwarding and Bouncing Mail
+8. Postponing Mail

 
 This section is intended as a brief overview of how to use Mutt. There are many
 other features which are described elsewhere in the manual. There is even more
 
 This section is intended as a brief overview of how to use Mutt. There are many
 other features which are described elsewhere in the manual. There is even more

-information available in the Mutt FAQ and various web pages. See the Mutt Page
-for more details.
+information available in the Mutt FAQ and various web pages. See the Mutt
+homepage for more details.

 
 The keybindings described in this section are the defaults as distributed. Your
 local system administrator may have altered the defaults for your site. You can
 
 The keybindings described in this section are the defaults as distributed. Your
 local system administrator may have altered the defaults for your site. You can

-always type ``?'' in any menu to display the current bindings.
+always type ??? in any menu to display the current bindings.

 
 

-The first thing you need to do is invoke mutt, simply by typing mutt at the
-command line. There are various command-line options, see either the mutt man
+The first thing you need to do is invoke Mutt, simply by typing mutt at the
+command line. There are various command-line options, see either the Mutt man

 page or the reference.
 
 page or the reference.
 

-1. Moving Around in Menus
-
-Information is presented in menus, very similar to ELM, see Table 2.1, "Most
-common navigation keys" for common keys used to navigate menus in Mutt.
-
-Table 2.1. Most common navigation keys
-
-┌───────────┬──────────────┬─────────────────────────────────────────┐
-│    Key    │   Function   │               Description               │
-├───────────┼──────────────┼─────────────────────────────────────────┤
-│j or Down  │next-entry    │move to the next entry                   │
-├───────────┼──────────────┼─────────────────────────────────────────┤
-│k or Up    │previous-entry│move to the previous entry               │
-├───────────┼──────────────┼─────────────────────────────────────────┤
-│z or PageDn│page-down     │go to the next page                      │
-├───────────┼──────────────┼─────────────────────────────────────────┤
-│Z or PageUp│page-up       │go to the previous page                  │
-├───────────┼──────────────┼─────────────────────────────────────────┤
-│= or Home  │first-entry   │jump to the first entry                  │
-├───────────┼──────────────┼─────────────────────────────────────────┤
-│* or End   │last-entry    │jump to the last entry                   │
-├───────────┼──────────────┼─────────────────────────────────────────┤
-│q          │quit          │exit the current menu                    │
-├───────────┼──────────────┼─────────────────────────────────────────┤
-│?          │help          │list all keybindings for the current menu│
-└───────────┴──────────────┴─────────────────────────────────────────┘
-
-
-2. Editing Input Fields
-
-2.1. Introduction
+1. Core Concepts
+
+Mutt is a text-based application which interacts with users through different
+menus which are mostly line-/entry-based or page-based. A line-based menu is
+the so-called ?index? menu (listing all messages of the currently opened
+folder) or the ?alias? menu (allowing you to select recipients from a list).
+Examples for page-based menus are the ?pager? (showing one message at a time)
+or the ?help? menu listing all available key bindings.
+
+The user interface consists of a context sensitive help line at the top, the
+menu's contents followed by a context sensitive status line and finally the
+command line. The command line is used to display informational and error
+messages as well as for prompts and for entering interactive commands.
+
+Mutt is configured through variables which, if the user wants to permanently
+use a non-default value, are written to configuration files. Mutt supports a
+rich config file syntax to make even complex configuration files readable and
+commentable.
+
+Because Mutt allows for customizing almost all key bindings, there are
+so-called ?functions? which can be executed manually (using the command line)
+or in macros. Macros allow the user to bind a sequence of commands to a single
+key or a short key sequence instead of repeating a sequence of actions over and
+over.
+
+Many commands (such as saving or copying a message to another folder) can be
+applied to a single message or a set of messages (so-called ?tagged? messages).
+To help selecting messages, Mutt provides a rich set of message patterns (such
+as recipients, sender, body contents, date sent/received, etc.) which can be
+combined into complex expressions using the boolean and and or operations as
+well as negating. These patterns can also be used to (for example) search for
+messages or to limit the index to show only matching messages.
+
+Mutt supports a ?hook? concept which allows the user to execute arbitrary
+configuration commands and functions in certain situations such as entering a
+folder, starting a new message or replying to an existing one. These hooks can
+be used to highly customize Mutt's behaviour including managing multiple
+identities, customizing the display for a folder or even implementing
+auto-archiving based on a per-folder basis and much more.
+
+Besides an interactive mode, Mutt can also be used as a command-line tool only
+send messages. It also supports a mailx(1)-compatible interface, see Table 9.1,
+?Command line options? for a complete list of command-line options.
+
+2. Screens and Menus
+
+2.1. Index
+
+The index is the screen that you usually see first when you start Mutt. It
+gives an overview over your emails in the currently opened mailbox. By default,
+this is your system mailbox. The information you see in the index is a list of
+emails, each with its number on the left, its flags (new email, important
+email, email that has been forwarded or replied to, tagged email, ...), the
+date when email was sent, its sender, the email size, and the subject.
+Additionally, the index also shows thread hierarchies: when you reply to an
+email, and the other person replies back, you can see the other's person email
+in a "sub-tree" below. This is especially useful for personal email between a
+group of people or when you've subscribed to mailing lists.
+
+2.2. Pager
+
+The pager is responsible for showing the email content. On the top of the pager
+you have an overview over the most important email headers like the sender, the
+recipient, the subject, and much more information. How much information you
+actually see depends on your configuration, which we'll describe below.
+
+Below the headers, you see the email body which usually contains the message.
+If the email contains any attachments, you will see more information about them
+below the email body, or, if the attachments are text files, you can view them
+directly in the pager.
+
+To give the user a good overview, it is possible to configure Mutt to show
+different things in the pager with different colors. Virtually everything that
+can be described with a regular expression can be colored, e.g. URLs, email
+addresses or smileys.
+
+2.3. File Browser
+
+The file browser is the interface to the local or remote file system. When
+selecting a mailbox to open, the browser allows custom sorting of items,
+limiting the items shown by a regular expression and a freely adjustable format
+of what to display in which way. It also allows for easy navigation through the
+file system when selecting file(s) to attach to a message, select multiple
+files to attach and many more.
+
+2.4. Help
+
+The help screen is meant to offer a quick help to the user. It lists the
+current configuration of key bindings and their associated commands including a
+short description, and currently unbound functions that still need to be
+associated with a key binding (or alternatively, they can be called via the
+Mutt command prompt).
+
+2.5. Compose Menu
+
+The compose menu features a split screen containing the information which
+really matter before actually sending a message by mail: who gets the message
+as what (recipients and who gets what kind of copy). Additionally, users may
+set security options like deciding whether to sign, encrypt or sign and encrypt
+a message with/for what keys. Also, it's used to attach messages, to re-edit
+any attachment including the message itself.
+
+2.6. Alias Menu
+
+The alias menu is used to help users finding the recipients of messages. For
+users who need to contact many people, there's no need to remember addresses or
+names completely because it allows for searching, too. The alias mechanism and
+thus the alias menu also features grouping several addresses by a shorter
+nickname, the actual alias, so that users don't have to select each single
+recipient manually.
+
+2.7. Attachment Menu
+
+As will be later discussed in detail, Mutt features a good and stable MIME
+implementation, that is, it supports sending and receiving messages of
+arbitrary MIME types. The attachment menu displays a message's structure in
+detail: what content parts are attached to which parent part (which gives a
+true tree structure), which type is of what type and what size. Single parts
+may saved, deleted or modified to offer great and easy access to message's
+internals.
+
+3. Moving Around in Menus
+
+The most important navigation keys common to line- or entry-based menus are
+shown in Table 2.1, ?Most common navigation keys in entry-based menus? and in
+Table 2.2, ?Most common navigation keys in page-based menus? for page-based
+menus.
+
+Table 2.1. Most common navigation keys in entry-based menus
+
++------------------------------------------------------------------------+
+|     Key     |    Function    |               Description               |
+|-------------+----------------+-----------------------------------------|
+|j or <Down>  |<next-entry>    |move to the next entry                   |
+|-------------+----------------+-----------------------------------------|
+|k or <Up>    |<previous-entry>|move to the previous entry               |
+|-------------+----------------+-----------------------------------------|
+|z or <PageDn>|<page-down>     |go to the next page                      |
+|-------------+----------------+-----------------------------------------|
+|Z or <PageUp>|<page-up>       |go to the previous page                  |
+|-------------+----------------+-----------------------------------------|
+|= or <Home>  |<first-entry>   |jump to the first entry                  |
+|-------------+----------------+-----------------------------------------|
+|* or <End>   |<last-entry>    |jump to the last entry                   |
+|-------------+----------------+-----------------------------------------|
+|q            |<quit>          |exit the current menu                    |
+|-------------+----------------+-----------------------------------------|
+|?            |<help>          |list all keybindings for the current menu|
++------------------------------------------------------------------------+
+
+
+Table 2.2. Most common navigation keys in page-based menus
+
++-------------------------------------------------------------+
+|         Key          |   Function    |     Description      |
+|----------------------+---------------+----------------------|
+|J or <Return>         |<next-line>    |scroll down one line  |
+|----------------------+---------------+----------------------|
+|<Backspace>           |<previous-line>|sroll up one line     |
+|----------------------+---------------+----------------------|
+|K, <Space> or <PageDn>|<next-page>    |move to the next page |
+|----------------------+---------------+----------------------|
+|- or <PageUp>         |<previous-page>|move the previous page|
+|----------------------+---------------+----------------------|
+|<Home>                |<top>          |move to the top       |
+|----------------------+---------------+----------------------|
+|<End>                 |<bottom>       |move to the bottom    |
++-------------------------------------------------------------+
+
+
+4. Editing Input Fields
+
+4.1. Introduction

 
 Mutt has a built-in line editor for inputting text, e.g. email addresses or
 filenames. The keys used to manipulate text input are very similar to those of
 
 Mutt has a built-in line editor for inputting text, e.g. email addresses or
 filenames. The keys used to manipulate text input are very similar to those of

-Emacs. See Table 2.2, "Most common line editor keys" for a full reference of
+Emacs. See Table 2.3, ?Most common line editor keys? for a full reference of

 available functions, their default key bindings, and short descriptions.
 
 available functions, their default key bindings, and short descriptions.
 

-Table 2.2. Most common line editor keys
-
-┌──────────────┬───────────────┬────────────────────────────────────┐
-│     Key      │   Function    │            Description             │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^A or <Home>  │bol            │move to the start of the line       │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^B or <Left>  │backward-char  │move back one char                  │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│Esc B         │backward-word  │move back one word                  │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^D or <Delete>│delete-char    │delete the char under the cursor    │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^E or <End>   │eol            │move to the end of the line         │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^F or <Right> │forward-char   │move forward one char               │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│Esc F         │forward-word   │move forward one word               │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│<Tab>         │complete       │complete filename or alias          │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^T            │complete-query │complete address with query         │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^K            │kill-eol       │delete to the end of the line       │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│ESC d         │kill-eow       │delete to the end ot the word       │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^W            │kill-word      │kill the word in front of the cursor│
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^U            │kill-line      │delete entire line                  │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^V            │quote-char     │quote the next typed key            │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│<Up>          │history-up     │recall previous string from history │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│<Down>        │history-down   │recall next string from history     │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│<BackSpace>   │backspace      │kill the char in front of the cursor│
-├──────────────┼───────────────┼────────────────────────────────────┤
-│Esc u         │upcase-word    │convert word to upper case          │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│Esc l         │downcase-word  │convert word to lower case          │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│Esc c         │capitalize-word│capitalize the word                 │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│^G            │n/a            │abort                               │
-├──────────────┼───────────────┼────────────────────────────────────┤
-│<Return>      │n/a            │finish editing                      │
-└──────────────┴───────────────┴────────────────────────────────────┘
+Table 2.3. Most common line editor keys
+
++---------------------------------------------------------------------+
+|     Key      |    Function     |            Description             |
+|--------------+-----------------+------------------------------------|
+|^A or <Home>  |<bol>            |move to the start of the line       |
+|--------------+-----------------+------------------------------------|
+|^B or <Left>  |<backward-char>  |move back one char                  |
+|--------------+-----------------+------------------------------------|
+|Esc B         |<backward-word>  |move back one word                  |
+|--------------+-----------------+------------------------------------|
+|^D or <Delete>|<delete-char>    |delete the char under the cursor    |
+|--------------+-----------------+------------------------------------|
+|^E or <End>   |<eol>            |move to the end of the line         |
+|--------------+-----------------+------------------------------------|
+|^F or <Right> |<forward-char>   |move forward one char               |
+|--------------+-----------------+------------------------------------|
+|Esc F         |<forward-word>   |move forward one word               |
+|--------------+-----------------+------------------------------------|
+|<Tab>         |<complete>       |complete filename or alias          |
+|--------------+-----------------+------------------------------------|
+|^T            |<complete-query> |complete address with query         |
+|--------------+-----------------+------------------------------------|
+|^K            |<kill-eol>       |delete to the end of the line       |
+|--------------+-----------------+------------------------------------|
+|Esc d         |<kill-eow>       |delete to the end of the word       |
+|--------------+-----------------+------------------------------------|
+|^W            |<kill-word>      |kill the word in front of the cursor|
+|--------------+-----------------+------------------------------------|
+|^U            |<kill-line>      |delete entire line                  |
+|--------------+-----------------+------------------------------------|
+|^V            |<quote-char>     |quote the next typed key            |
+|--------------+-----------------+------------------------------------|
+|<Up>          |<history-up>     |recall previous string from history |
+|--------------+-----------------+------------------------------------|
+|<Down>        |<history-down>   |recall next string from history     |
+|--------------+-----------------+------------------------------------|
+|<BackSpace>   |<backspace>      |kill the char in front of the cursor|
+|--------------+-----------------+------------------------------------|
+|Esc u         |<upcase-word>    |convert word to upper case          |
+|--------------+-----------------+------------------------------------|
+|Esc l         |<downcase-word>  |convert word to lower case          |
+|--------------+-----------------+------------------------------------|
+|Esc c         |<capitalize-word>|capitalize the word                 |
+|--------------+-----------------+------------------------------------|
+|^G            |n/a              |abort                               |
+|--------------+-----------------+------------------------------------|
+|<Return>      |n/a              |finish editing                      |
++---------------------------------------------------------------------+

 
 
 You can remap the editor functions using the bind command. For example, to make
 
 
 You can remap the editor functions using the bind command. For example, to make

-the Delete key delete the character in front of the cursor rather than under,
-you could use
+the <Delete> key delete the character in front of the cursor rather than under,
+you could use:

 
 bind editor <delete> backspace
 
 
 bind editor <delete> backspace
 

-2.2. History
+4.2. History

 
 

-The number of items in the built-in editor's history is controlled by the
-$history variable. You may cycle through them at an editor prompt by using the
-history-up and/or history-down commands.
+Mutt maintains a history for the built-in editor. The number of items is
+controlled by the $history variable and can be made persistent using an
+external file specified using $history_file. You may cycle through them at an
+editor prompt by using the <history-up> and/or <history-down> commands. But
+notice that Mutt does not remember the currently entered text, it only cycles
+through history and wraps around at the end or beginning.

 
 Mutt maintains several distinct history lists, one for each of the following
 categories:
 
 
 Mutt maintains several distinct history lists, one for each of the following
 categories:
 

-  ● muttrc commands
+  * .muttrc commands

 
 

-  ● addresses and aliases
+  * addresses and aliases

 
 

-  ● shell commands
+  * shell commands

 
 

-  ● filenames
+  * filenames

 
 

-  ● patterns
+  * patterns

 
 

-  ● everything else
+  * everything else

 
 

-Mutt automatically filters out repeated items from the history. It also mimics
-the behavior of some shells by ignoring items starting with a space.
-
-The latter feature can be useful in macros to not clobber the history's
+Mutt automatically filters out consecutively repeated items from the history.
+It also mimics the behavior of some shells by ignoring items starting with a
+space. The latter feature can be useful in macros to not clobber the history's

 valuable entries with unwanted entries.
 
 valuable entries with unwanted entries.
 

-3. Reading Mail - The Index and Pager
+5. Reading Mail

 
 Similar to many other mail clients, there are two modes in which mail is read
 
 Similar to many other mail clients, there are two modes in which mail is read

-in Mutt. The first is the index of messages in the mailbox, which is called the
-``index'' in Mutt. The second mode is the display of the message contents. This
-is called the ``pager.''
+in Mutt. The first is a list of messages in the mailbox, which is called the
+?index? menu in Mutt. The second mode is the display of the message contents.
+This is called the ?pager.?

 
 The next few sections describe the functions provided in each of these modes.
 
 
 The next few sections describe the functions provided in each of these modes.
 

-3.1. The Message Index
+5.1. The Message Index

 
 Common keys used to navigate through and manage messages in the index are shown
 
 Common keys used to navigate through and manage messages in the index are shown

-in Table 2.3, "Most common message index keys".
-
-Table 2.3. Most common message index keys
-
-┌────────┬───────────────────────────────────────────┐
-│  Key   │                Description                │
-├────────┼───────────────────────────────────────────┤
-│c       │change to a different mailbox              │
-├────────┼───────────────────────────────────────────┤
-│ESC c   │change to a folder in read-only mode       │
-├────────┼───────────────────────────────────────────┤
-│C       │copy the current message to another mailbox│
-├────────┼───────────────────────────────────────────┤
-│ESC C   │decode a message and copy it to a folder   │
-├────────┼───────────────────────────────────────────┤
-│ESC s   │decode a message and save it to a folder   │
-├────────┼───────────────────────────────────────────┤
-│D       │delete messages matching a pattern         │
-├────────┼───────────────────────────────────────────┤
-│d       │delete the current message                 │
-├────────┼───────────────────────────────────────────┤
-│F       │mark as important                          │
-├────────┼───────────────────────────────────────────┤
-│l       │show messages matching a pattern           │
-├────────┼───────────────────────────────────────────┤
-│N       │mark message as new                        │
-├────────┼───────────────────────────────────────────┤
-│o       │change the current sort method             │
-├────────┼───────────────────────────────────────────┤
-│O       │reverse sort the mailbox                   │
-├────────┼───────────────────────────────────────────┤
-│q       │save changes and exit                      │
-├────────┼───────────────────────────────────────────┤
-│s       │save-message                               │
-├────────┼───────────────────────────────────────────┤
-│T       │tag messages matching a pattern            │
-├────────┼───────────────────────────────────────────┤
-│t       │toggle the tag on a message                │
-├────────┼───────────────────────────────────────────┤
-│ESC t   │toggle tag on entire message thread        │
-├────────┼───────────────────────────────────────────┤
-│U       │undelete messages matching a pattern       │
-├────────┼───────────────────────────────────────────┤
-│u       │undelete-message                           │
-├────────┼───────────────────────────────────────────┤
-│v       │view-attachments                           │
-├────────┼───────────────────────────────────────────┤
-│x       │abort changes and exit                     │
-├────────┼───────────────────────────────────────────┤
-│<Return>│display-message                            │
-├────────┼───────────────────────────────────────────┤
-│<Tab>   │jump to the next new or unread message     │
-├────────┼───────────────────────────────────────────┤
-│@       │show the author's full e-mail address      │
-├────────┼───────────────────────────────────────────┤
-│$       │save changes to mailbox                    │
-├────────┼───────────────────────────────────────────┤
-│/       │search                                     │
-├────────┼───────────────────────────────────────────┤
-│ESC /   │search-reverse                             │
-├────────┼───────────────────────────────────────────┤
-│^L      │clear and redraw the screen                │
-├────────┼───────────────────────────────────────────┤
-│^T      │untag messages matching a pattern          │
-└────────┴───────────────────────────────────────────┘
-
-
-3.1.1. Status Flags
+in Table 2.4, ?Most common message index keys?. How messages are presented in
+the index menu can be customized using the $index_format variable.
+
+Table 2.4. Most common message index keys
+
++----------------------------------------------------+
+|  Key   |                Description                |
+|--------+-------------------------------------------|
+|c       |change to a different mailbox              |
+|--------+-------------------------------------------|
+|Esc c   |change to a folder in read-only mode       |
+|--------+-------------------------------------------|
+|C       |copy the current message to another mailbox|
+|--------+-------------------------------------------|
+|Esc C   |decode a message and copy it to a folder   |
+|--------+-------------------------------------------|
+|Esc s   |decode a message and save it to a folder   |
+|--------+-------------------------------------------|
+|D       |delete messages matching a pattern         |
+|--------+-------------------------------------------|
+|d       |delete the current message                 |
+|--------+-------------------------------------------|
+|F       |mark as important                          |
+|--------+-------------------------------------------|
+|l       |show messages matching a pattern           |
+|--------+-------------------------------------------|
+|N       |mark message as new                        |
+|--------+-------------------------------------------|
+|o       |change the current sort method             |
+|--------+-------------------------------------------|
+|O       |reverse sort the mailbox                   |
+|--------+-------------------------------------------|
+|q       |save changes and exit                      |
+|--------+-------------------------------------------|
+|s       |save-message                               |
+|--------+-------------------------------------------|
+|T       |tag messages matching a pattern            |
+|--------+-------------------------------------------|
+|t       |toggle the tag on a message                |
+|--------+-------------------------------------------|
+|Esc t   |toggle tag on entire message thread        |
+|--------+-------------------------------------------|
+|U       |undelete messages matching a pattern       |
+|--------+-------------------------------------------|
+|u       |undelete-message                           |
+|--------+-------------------------------------------|
+|v       |view-attachments                           |
+|--------+-------------------------------------------|
+|x       |abort changes and exit                     |
+|--------+-------------------------------------------|
+|<Return>|display-message                            |
+|--------+-------------------------------------------|
+|<Tab>   |jump to the next new or unread message     |
+|--------+-------------------------------------------|
+|@       |show the author's full e-mail address      |
+|--------+-------------------------------------------|
+|$       |save changes to mailbox                    |
+|--------+-------------------------------------------|
+|/       |search                                     |
+|--------+-------------------------------------------|
+|Esc /   |search-reverse                             |
+|--------+-------------------------------------------|
+|^L      |clear and redraw the screen                |
+|--------+-------------------------------------------|
+|^T      |untag messages matching a pattern          |
++----------------------------------------------------+
+

 
 In addition to who sent the message and the subject, a short summary of the
 disposition of each message is printed beside the message number. Zero or more
 
 In addition to who sent the message and the subject, a short summary of the
 disposition of each message is printed beside the message number. Zero or more

-of the following ``flags'' may appear, which mean:
-
-D
-
-    message is deleted (is marked for deletion)
-
-d
-
-    message have attachments marked for deletion
-
-K
-
-    contains a PGP public key
-
-N
-
-    message is new
-
-O
-
-    message is old
-
-P
-
-    message is PGP encrypted
-
-r
-
-    message has been replied to
-
-S
-
-    message is signed, and the signature is successfully verified
-
-s
-
-    message is signed
-
-!
-
-    message is flagged
-
-*
-
-    message is tagged
-
-Some of the status flags can be turned on or off using
-
-  ● set-flag (default: w)
-
-  ● clear-flag (default: W)
-
-Furthermore, the following flags reflect who the message is addressed to. They
-can be customized with the $to_chars variable.
-
-+
-
-    message is to you and you only
-
-T
-
-    message is to you, but also to or cc'ed to others
-
-C
-
-    message is cc'ed to you
-
-F
-
-    message is from you
-
-L
-
-    message is sent to a subscribed mailing list
-
-3.2. The Pager
-
-By default, Mutt uses its builtin pager to display the body of messages. The
-pager is very similar to the Unix program less though not nearly as featureful.
-
-Table 2.4. Most common pager keys
-
-┌────────┬──────────────────────────────────────────────────────────────────┐
-│  Key   │                           Description                            │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│<Return>│go down one line                                                  │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│<Space> │display the next page (or next message if at the end of a message)│
-├────────┼──────────────────────────────────────────────────────────────────┤
-│-       │go back to the previous page                                      │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│n       │search for next match                                             │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│S       │skip beyond quoted text                                           │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│T       │toggle display of quoted text                                     │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│?       │show keybindings                                                  │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│/       │search for a regular expression (pattern)                         │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│ESC /   │search backwards for a regular expression                         │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│\       │toggle search pattern coloring                                    │
-├────────┼──────────────────────────────────────────────────────────────────┤
-│^       │jump to the top of the message                                    │
-└────────┴──────────────────────────────────────────────────────────────────┘
-
-
-In addition to key bindings in Table 2.4, "Most common pager keys", many of the
-functions from the index are available in the pager, such as delete-message or
-copy-message (this is one advantage over using an external pager to view
-messages).
+of the ?flags? in Table 2.5, ?Message status flags? may appear, some of which
+can be turned on or off using these functions: <set-flag> and <clear-flag>
+bound by default to ?w? and ?W? respectively.
+
+Furthermore, the flags in Table 2.6, ?Message recipient flags? reflect who the
+message is addressed to. They can be customized with the $to_chars variable.
+
+Table 2.5. Message status flags
+
++------------------------------------------------------------------+
+|Flag|                         Description                         |
+|----+-------------------------------------------------------------|
+|D   |message is deleted (is marked for deletion)                  |
+|----+-------------------------------------------------------------|
+|d   |message has attachments marked for deletion                  |
+|----+-------------------------------------------------------------|
+|K   |contains a PGP public key                                    |
+|----+-------------------------------------------------------------|
+|N   |message is new                                               |
+|----+-------------------------------------------------------------|
+|O   |message is old                                               |
+|----+-------------------------------------------------------------|
+|P   |message is PGP encrypted                                     |
+|----+-------------------------------------------------------------|
+|r   |message has been replied to                                  |
+|----+-------------------------------------------------------------|
+|S   |message is signed, and the signature is successfully verified|
+|----+-------------------------------------------------------------|
+|s   |message is signed                                            |
+|----+-------------------------------------------------------------|
+|!   |message is flagged                                           |
+|----+-------------------------------------------------------------|
+|*   |message is tagged                                            |
++------------------------------------------------------------------+
+
+
+Table 2.6. Message recipient flags
+
++------------------------------------------------------+
+|Flag|                   Description                   |
+|----+-------------------------------------------------|
+|+   |message is to you and you only                   |
+|----+-------------------------------------------------|
+|T   |message is to you, but also to or cc'ed to others|
+|----+-------------------------------------------------|
+|C   |message is cc'ed to you                          |
+|----+-------------------------------------------------|
+|F   |message is from you                              |
+|----+-------------------------------------------------|
+|L   |message is sent to a subscribed mailing list     |
++------------------------------------------------------+
+
+
+5.2. The Pager
+
+By default, Mutt uses its builtin pager to display the contents of messages (an
+external pager such as less(1) can be configured, see $pager variable). The
+pager is very similar to the Unix program less(1) though not nearly as
+featureful.
+
+Table 2.7. Most common pager keys
+
++---------------------------------------------------------------------------+
+|  Key   |                           Description                            |
+|--------+------------------------------------------------------------------|
+|<Return>|go down one line                                                  |
+|--------+------------------------------------------------------------------|
+|<Space> |display the next page (or next message if at the end of a message)|
+|--------+------------------------------------------------------------------|
+|-       |go back to the previous page                                      |
+|--------+------------------------------------------------------------------|
+|n       |search for next match                                             |
+|--------+------------------------------------------------------------------|
+|S       |skip beyond quoted text                                           |
+|--------+------------------------------------------------------------------|
+|T       |toggle display of quoted text                                     |
+|--------+------------------------------------------------------------------|
+|?       |show keybindings                                                  |
+|--------+------------------------------------------------------------------|
+|/       |regular expression search                                         |
+|--------+------------------------------------------------------------------|
+|Esc /   |backward regular expression search                                |
+|--------+------------------------------------------------------------------|
+|\       |toggle highlighting of search matches                             |
+|--------+------------------------------------------------------------------|
+|^       |jump to the top of the message                                    |
++---------------------------------------------------------------------------+
+
+
+In addition to key bindings in Table 2.7, ?Most common pager keys?, many of the
+functions from the index menu are also available in the pager, such as
+<delete-message> or <copy-message> (this is one advantage over using an
+external pager to view messages).

 
 Also, the internal pager supports a couple other advanced features. For one, it
 
 Also, the internal pager supports a couple other advanced features. For one, it

-will accept and translate the ``standard'' nroff sequences for bold and
-underline. These sequences are a series of either the letter, backspace (^H),
-the letter again for bold or the letter, backspace, ``_'' for denoting
-underline. Mutt will attempt to display these in bold and underline
-respectively if your terminal supports them. If not, you can use the bold and
-underline color objects to specify a color or mono attribute for them.
+will accept and translate the ?standard? nroff sequences for bold and
+underline. These sequences are a series of either the letter, backspace (?^H?),
+the letter again for bold or the letter, backspace, ?_? for denoting underline.
+Mutt will attempt to display these in bold and underline respectively if your
+terminal supports them. If not, you can use the bold and underline color
+objects to specify a color or mono attribute for them.

 
 Additionally, the internal pager supports the ANSI escape sequences for
 character attributes. Mutt translates them into the correct color and character
 
 Additionally, the internal pager supports the ANSI escape sequences for
 character attributes. Mutt translates them into the correct color and character

-settings. The sequences Mutt supports are '\e[Ps;Ps;..Ps;m' where Ps can be one
-of the codes shown in Table 2.5, "ANSI escape sequences".
-
-Table 2.5. ANSI escape sequences
-
-┌───────────┬──────────────────────────────────────────────────────────────┐
-│Escape code│                         Description                          │
-├───────────┼──────────────────────────────────────────────────────────────┤
-│0          │All Attributes Off                                            │
-├───────────┼──────────────────────────────────────────────────────────────┤
-│1          │Bold on                                                       │
-├───────────┼──────────────────────────────────────────────────────────────┤
-│4          │Underline on                                                  │
-├───────────┼──────────────────────────────────────────────────────────────┤
-│5          │Blink on                                                      │
-├───────────┼──────────────────────────────────────────────────────────────┤
-│7          │Reverse video on                                              │
-├───────────┼──────────────────────────────────────────────────────────────┤
-│3<color>   │Foreground color is <color> (see Table 2.6, "Color sequences")│
-├───────────┼──────────────────────────────────────────────────────────────┤
-│4<color>   │Background color is <color> (see Table 2.6, "Color sequences")│
-└───────────┴──────────────────────────────────────────────────────────────┘
-
-
-Table 2.6. Color sequences
-
-┌───────────┬───────┐
-│Color code │ Color │
-├───────────┼───────┤
-│0          │Black  │
-├───────────┼───────┤
-│1          │Red    │
-├───────────┼───────┤
-│2          │Green  │
-├───────────┼───────┤
-│3          │Yellow │
-├───────────┼───────┤
-│4          │Blue   │
-├───────────┼───────┤
-│5          │Magenta│
-├───────────┼───────┤
-│6          │Cyan   │
-├───────────┼───────┤
-│7          │White  │
-└───────────┴───────┘
+settings. The sequences Mutt supports are:
+
+\e[Ps;Ps;..Ps;m
+
+where Ps can be one of the codes shown in Table 2.8, ?ANSI escape sequences?.
+
+Table 2.8. ANSI escape sequences
+
++--------------------------------------------------------------------------+
+|Escape code|                         Description                          |
+|-----------+--------------------------------------------------------------|
+|0          |All attributes off                                            |
+|-----------+--------------------------------------------------------------|
+|1          |Bold on                                                       |
+|-----------+--------------------------------------------------------------|
+|4          |Underline on                                                  |
+|-----------+--------------------------------------------------------------|
+|5          |Blink on                                                      |
+|-----------+--------------------------------------------------------------|
+|7          |Reverse video on                                              |
+|-----------+--------------------------------------------------------------|
+|3<color>   |Foreground color is <color> (see Table 2.9, ?Color sequences?)|
+|-----------+--------------------------------------------------------------|
+|4<color>   |Background color is <color> (see Table 2.9, ?Color sequences?)|
++--------------------------------------------------------------------------+
+
+
+Table 2.9. Color sequences
+
++-------------------+
+|Color code | Color |
+|-----------+-------|
+|0          |Black  |
+|-----------+-------|
+|1          |Red    |
+|-----------+-------|
+|2          |Green  |
+|-----------+-------|
+|3          |Yellow |
+|-----------+-------|
+|4          |Blue   |
+|-----------+-------|
+|5          |Magenta|
+|-----------+-------|
+|6          |Cyan   |
+|-----------+-------|
+|7          |White  |
++-------------------+

 
 
 Mutt uses these attributes for handling text/enriched messages, and they can
 
 
 Mutt uses these attributes for handling text/enriched messages, and they can

-also be used by an external autoview script for highlighting purposes. Note: If
-you change the colors for your display, for example by changing the color
-associated with color2 for your xterm, then that color will be used instead of
-green.
+also be used by an external autoview script for highlighting purposes.

 
 

-3.3. Threaded Mode
+Note

 
 

-When the mailbox is sorted by threads, there are a few additional functions
-available in the index and pager modes as shown in Table 2.7, "Most common
-thread mode keys".
-
-Table 2.7. Most common thread mode keys
-
-┌─────┬──────────────────┬──────────────────────────────────────────────┐
-│ Key │     Function     │                 Description                  │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│^D   │delete-thread     │delete all messages in the current thread     │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│^U   │undelete-thread   │undelete all messages in the current thread   │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│^N   │next-thread       │jump to the start of the next thread          │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│^P   │previous-thread   │jump to the start of the previous thread      │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│^R   │read-thread       │mark the current thread as read               │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│ESC d│delete-subthread  │delete all messages in the current subthread  │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│ESC u│undelete-subthread│undelete all messages in the current subthread│
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│ESC n│next-subthread    │jump to the start of the next subthread       │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│ESC p│previous-subthread│jump to the start of the previous subthread   │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│ESC r│read-subthread    │mark the current subthread as read            │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│ESC t│tag-thread        │toggle the tag on the current thread          │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│ESC v│collapse-thread   │toggle collapse for the current thread        │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│ESC V│collapse-all      │toggle collapse for all threads               │
-├─────┼──────────────────┼──────────────────────────────────────────────┤
-│P    │parent-message    │jump to parent message in thread              │
-└─────┴──────────────────┴──────────────────────────────────────────────┘
+If you change the colors for your display, for example by changing the color
+associated with color2 for your xterm, then that color will be used instead of
+green.
+
+Note
+
+Note that the search commands in the pager take regular expressions, which are
+not quite the same as the more complex patterns used by the search command in
+the index. This is because patterns are used to select messages by criteria
+whereas the pager already displays a selected message.
+
+5.3. Threaded Mode
+
+So-called ?threads? provide a hierarchy of messages where replies are linked to
+their parent message(s). This organizational form is extremely useful in
+mailing lists where different parts of the discussion diverge. Mutt displays
+threads as a tree structure.
+
+In Mutt, when a mailbox is sorted by threads, there are a few additional
+functions available in the index and pager modes as shown in Table 2.10, ?Most
+common thread mode keys?.
+
+Table 2.10. Most common thread mode keys
+
++-------------------------------------------------------------------------+
+| Key |      Function      |                 Description                  |
+|-----+--------------------+----------------------------------------------|
+|^D   |<delete-thread>     |delete all messages in the current thread     |
+|-----+--------------------+----------------------------------------------|
+|^U   |<undelete-thread>   |undelete all messages in the current thread   |
+|-----+--------------------+----------------------------------------------|
+|^N   |<next-thread>       |jump to the start of the next thread          |
+|-----+--------------------+----------------------------------------------|
+|^P   |<previous-thread>   |jump to the start of the previous thread      |
+|-----+--------------------+----------------------------------------------|
+|^R   |<read-thread>       |mark the current thread as read               |
+|-----+--------------------+----------------------------------------------|
+|Esc d|<delete-subthread>  |delete all messages in the current subthread  |
+|-----+--------------------+----------------------------------------------|
+|Esc u|<undelete-subthread>|undelete all messages in the current subthread|
+|-----+--------------------+----------------------------------------------|
+|Esc n|<next-subthread>    |jump to the start of the next subthread       |
+|-----+--------------------+----------------------------------------------|
+|Esc p|<previous-subthread>|jump to the start of the previous subthread   |
+|-----+--------------------+----------------------------------------------|
+|Esc r|<read-subthread>    |mark the current subthread as read            |
+|-----+--------------------+----------------------------------------------|
+|Esc t|<tag-thread>        |toggle the tag on the current thread          |
+|-----+--------------------+----------------------------------------------|
+|Esc v|<collapse-thread>   |toggle collapse for the current thread        |
+|-----+--------------------+----------------------------------------------|
+|Esc V|<collapse-all>      |toggle collapse for all threads               |
+|-----+--------------------+----------------------------------------------|
+|P    |<parent-message>    |jump to parent message in thread              |
++-------------------------------------------------------------------------+

 
 
 
 

-Note: Collapsing a thread displays only the first message in the thread and
-hides the others. This is useful when threads contain so many messages that you
-can only see a handful of threads on the screen. See %M in $index_format. For
-example, you could use "%?M?(#%03M)&(%4l)?" in $index_format to optionally
-display the number of hidden messages if the thread is collapsed.
+Collapsing a thread displays only the first message in the thread and hides the
+others. This is useful when threads contain so many messages that you can only
+see a handful of threads on the screen. See %M in $index_format. For example,
+you could use ?%?M?(#%03M)&(%4l)?? in $index_format to optionally display the
+number of hidden messages if the thread is collapsed. The %?<char>?<if-part>&
+<else-part>? syntax is explained in detail in format string conditionals.
+
+Technically, every reply should contain a list of its parent messages in the
+thread tree, but not all do. In these cases, Mutt groups them by subject which
+can be controlled using the $strict_threads variable.
+
+5.4. Miscellaneous Functions
+
+In addition, the index and pager menus have these interesting functions:
+
+<create-alias> (default: a)

 
 

-See also: $strict_threads.
+    Creates a new alias based upon the current message (or prompts for a new
+    one). Once editing is complete, an alias command is added to the file
+    specified by the $alias_file variable for future use

 
 

-3.4. Miscellaneous Functions
+    Note

 
 

-create-alias (default: a)
+    Mutt does not read the $alias_file upon startup so you must explicitly
+    source the file.

 
 

-Creates a new alias based upon the current message (or prompts for a new one).
-Once editing is complete, an alias command is added to the file specified by
-the $alias_file variable for future use. Note: Specifying an $alias_file does
-not add the aliases specified there-in, you must also source the file.
+<check-traditional-pgp> (default: Esc P)

 
 

-check-traditional-pgp (default: ESC P)
+    This function will search the current message for content signed or
+    encrypted with PGP the ?traditional? way, that is, without proper MIME
+    tagging. Technically, this function will temporarily change the MIME
+    content types of the body parts containing PGP data; this is similar to the
+    <edit-type> function's effect.

 
 

-This function will search the current message for content signed or encrypted
-with PGP the "traditional" way, that is, without proper MIME tagging.
-Technically, this function will temporarily change the MIME content types of
-the body parts containing PGP data; this is similar to the edit-type function's
-effect.
+<edit> (default: e)

 
 

-display-toggle-weed (default: h)
+    This command (available in the index and pager) allows you to edit the raw
+    current message as it's present in the mail folder. After you have finished
+    editing, the changed message will be appended to the current folder, and
+    the original message will be marked for deletion; if the message is
+    unchanged it won't be replaced.
+
+<edit-type> (default: ^E on the attachment menu, and in the pager and index
+    menus; ^T on the compose menu)
+
+    This command is used to temporarily edit an attachment's content type to
+    fix, for instance, bogus character set parameters. When invoked from the
+    index or from the pager, you'll have the opportunity to edit the top-level
+    attachment's content type. On the attachment menu, you can change any
+    attachment's content type. These changes are not persistent, and get lost
+    upon changing folders.
+
+    Note that this command is also available on the compose menu. There, it's
+    used to fine-tune the properties of attachments you are going to send.
+
+<enter-command> (default: ?:?)
+
+    This command is used to execute any command you would normally put in a
+    configuration file. A common use is to check the settings of variables, or
+    in conjunction with macros to change settings on the fly.
+
+<extract-keys> (default: ^K)
+
+    This command extracts PGP public keys from the current or tagged message(s)
+    and adds them to your PGP public key ring.
+
+<forget-passphrase> (default: ^F)
+
+    This command wipes the passphrase(s) from memory. It is useful, if you
+    misspelled the passphrase.
+
+<list-reply> (default: L)
+
+    Reply to the current or tagged message(s) by extracting any addresses which
+    match the regular expressions given by the lists or subscribe commands, but
+    also honor any Mail-Followup-To header(s) if the $honor_followup_to
+    configuration variable is set. Using this when replying to messages posted
+    to mailing lists helps avoid duplicate copies being sent to the author of
+    the message you are replying to.

 
 

-Toggles the weeding of message header fields specified by ignore commands.
+<pipe-message> (default: |)

 
 

-edit (default: e)
-
-This command (available in the ``index'' and ``pager'') allows you to edit the
-raw current message as it's present in the mail folder. After you have finished
-editing, the changed message will be appended to the current folder, and the
-original message will be marked for deletion.
+    Asks for an external Unix command and pipes the current or tagged message
+    (s) to it. The variables $pipe_decode, $pipe_split, $pipe_sep and $wait_key
+    control the exact behavior of this function.

 
 

-edit-type (default: ^E on the attachment menu, and in the pager and index
-menus; ^T on the compose menu)
+<resend-message> (default: Esc e)

 
 

-This command is used to temporarily edit an attachment's content type to fix,
-for instance, bogus character set parameters. When invoked from the index or
-from the pager, you'll have the opportunity to edit the top-level attachment's
-content type. On the attachment menu, you can change any attachment's content
-type. These changes are not persistent, and get lost upon changing folders.
+    Mutt takes the current message as a template for a new message. This
+    function is best described as "recall from arbitrary folders". It can
+    conveniently be used to forward MIME messages while preserving the original
+    mail structure. Note that the amount of headers included here depends on
+    the value of the $weed variable.

 
 

-Note that this command is also available on the compose menu. There, it's used
-to fine-tune the properties of attachments you are going to send.
+    This function is also available from the attachment menu. You can use this
+    to easily resend a message which was included with a bounce message as a
+    message/rfc822 body part.

 
 

-enter-command (default: ``:'')
+<shell-escape> (default: !)

 
 

-This command is used to execute any command you would normally put in a
-configuration file. A common use is to check the settings of variables, or in
-conjunction with macros to change settings on the fly.
+    Asks for an external Unix command and executes it. The $wait_key can be
+    used to control whether Mutt will wait for a key to be pressed when the
+    command returns (presumably to let the user read the output of the
+    command), based on the return status of the named command. If no command is
+    given, an interactive shell is executed.

 
 

-extract-keys (default: ^K)
+<toggle-quoted> (default: T)

 
 

-This command extracts PGP public keys from the current or tagged message(s) and
-adds them to your PGP public key ring.
+    The pager uses the $quote_regexp variable to detect quoted text when
+    displaying the body of the message. This function toggles the display of
+    the quoted material in the message. It is particularly useful when being
+    interested in just the response and there is a large amount of quoted text
+    in the way.

 
 

-forget-passphrase (default: ^F)
-
-This command wipes the passphrase(s) from memory. It is useful, if you
-misspelled the passphrase.
-
-list-reply (default: L)
-
-Reply to the current or tagged message(s) by extracting any addresses which
-match the regular expressions given by the lists or subscribe commands, but
-also honor any Mail-Followup-To header(s) if the $honor_followup_to
-configuration variable is set. Using this when replying to messages posted to
-mailing lists helps avoid duplicate copies being sent to the author of the
-message you are replying to.
-
-pipe-message (default: |)
+<skip-quoted> (default: S)

 
 

-Asks for an external Unix command and pipes the current or tagged message(s) to
-it. The variables $pipe_decode, $pipe_split, $pipe_sep and $wait_key control
-the exact behavior of this function.
+    This function will go to the next line of non-quoted text which comes after
+    a line of quoted text in the internal pager.

 
 

-resend-message (default: ESC e)
+6. Sending Mail

 
 

-With resend-message, mutt takes the current message as a template for a new
-message. This function is best described as "recall from arbitrary folders". It
-can conveniently be used to forward MIME messages while preserving the original
-mail structure. Note that the amount of headers included here depends on the
-value of the $weed variable.
+6.1. Introduction

 
 

-This function is also available from the attachment menu. You can use this to
-easily resend a message which was included with a bounce message as a message/
-rfc822 body part.
+The bindings shown in Table 2.11, ?Most common mail sending keys? are available
+in the index and pager to start a new message.

 
 

-shell-escape (default: !)
+Table 2.11. Most common mail sending keys

 
 

-Asks for an external Unix command and executes it. The $wait_key can be used to
-control whether Mutt will wait for a key to be pressed when the command returns
-(presumably to let the user read the output of the command), based on the
-return status of the named command.
++----------------------------------------------------+
+| Key |  Function   |          Description           |
+|-----+-------------+--------------------------------|
+|m    |<compose>    |compose a new message           |
+|-----+-------------+--------------------------------|
+|r    |<reply>      |reply to sender                 |
+|-----+-------------+--------------------------------|
+|g    |<group-reply>|reply to all recipients         |
+|-----+-------------+--------------------------------|
+|L    |<list-reply> |reply to mailing list address   |
+|-----+-------------+--------------------------------|
+|f    |<forward>    |forward message                 |
+|-----+-------------+--------------------------------|
+|b    |<bounce>     |bounce (remail) message         |
+|-----+-------------+--------------------------------|
+|Esc k|<mail-key>   |mail a PGP public key to someone|
++----------------------------------------------------+

 
 

-toggle-quoted (default: T)

 
 

-The pager uses the $quote_regexp variable to detect quoted text when displaying
-the body of the message. This function toggles the display of the quoted
-material in the message. It is particularly useful when are interested in just
-the response and there is a large amount of quoted text in the way.
+Bouncing a message sends the message as-is to the recipient you specify.
+Forwarding a message allows you to add comments or modify the message you are
+forwarding. These items are discussed in greater detail in the next section ?
+Forwarding and Bouncing Mail.?

 
 

-skip-quoted (default: S)
+Mutt will then enter the compose menu and prompt you for the recipients to
+place on the ?To:? header field when you hit m to start a new message. Next, it
+will ask you for the ?Subject:? field for the message, providing a default if
+you are replying to or forwarding a message. You again have the chance to
+adjust recipients, subject, and security settings right before actually sending
+the message. See also $askcc, $askbcc, $autoedit, $bounce, $fast_reply, and
+$include for changing how and if Mutt asks these questions.

 
 

-This function will go to the next line of non-quoted text which come after a
-line of quoted text in the internal pager.
+When replying, Mutt fills these fields with proper values depending on the
+reply type. The types of replying supported are:

 
 

-4. Sending Mail
+Simple reply

 
 

-The bindings shown in Table 2.8, "Most common mail sending keys" are available
-in the index for sending messages.
+    Reply to the author directly.

 
 

-Table 2.8. Most common mail sending keys
+Group reply

 
 

-┌─────┬───────────┬────────────────────────────────┐
-│ Key │ Function  │          Description           │
-├─────┼───────────┼────────────────────────────────┤
-│m    │compose    │compose a new message           │
-├─────┼───────────┼────────────────────────────────┤
-│r    │reply      │reply to sender                 │
-├─────┼───────────┼────────────────────────────────┤
-│g    │group-reply│reply to all recipients         │
-├─────┼───────────┼────────────────────────────────┤
-│L    │list-reply │reply to mailing list address   │
-├─────┼───────────┼────────────────────────────────┤
-│f    │forward    │forward message                 │
-├─────┼───────────┼────────────────────────────────┤
-│b    │bounce     │bounce (remail) message         │
-├─────┼───────────┼────────────────────────────────┤
-│ESC k│mail-key   │mail a PGP public key to someone│
-└─────┴───────────┴────────────────────────────────┘
+    Reply to the author as well to all recipients except you; this consults
+    alternates.

 
 

+List reply

 
 

-Bouncing a message sends the message as is to the recipient you specify.
-Forwarding a message allows you to add comments or modify the message you are
-forwarding. These items are discussed in greater detail in the next chapter ``
-Forwarding and Bouncing Mail.''
+    Reply to all mailing list addresses found, either specified via
+    configuration or auto-detected. See Section 12, ?Mailing Lists? for
+    details.

 
 

-Mutt will then enter the compose menu and prompt you for the recipients to
-place on the ``To:'' header field. Next, it will ask you for the ``Subject:''
-field for the message, providing a default if you are replying to or forwarding
-a message. See also $askcc, $askbcc, $autoedit, $bounce, $fast_reply, and
-$include for changing how Mutt asks these questions.
-
-Mutt will then automatically start your $editor on the message body. If the
-$edit_headers variable is set, the headers will be at the top of the message in
-your editor. Any messages you are replying to will be added in sort order to
-the message, with appropriate $attribution, $indent_string and
-$post_indent_string. When forwarding a message, if the $mime_forward variable
-is unset, a copy of the forwarded message will be included. If you have
-specified a $signature, it will be appended to the message.
+After getting recipients for new messages, forwards or replies, Mutt will then
+automatically start your $editor on the message body. If the $edit_headers
+variable is set, the headers will be at the top of the message in your editor.
+Any messages you are replying to will be added in sort order to the message,
+with appropriate $attribution, $indent_string and $post_indent_string. When
+forwarding a message, if the $mime_forward variable is unset, a copy of the
+forwarded message will be included. If you have specified a $signature, it will
+be appended to the message.

 
 Once you have finished editing the body of your mail message, you are returned
 
 Once you have finished editing the body of your mail message, you are returned

-to the compose menu providing the functions show in Table 2.9, "Most common
-compose menu keys".
-
-Table 2.9. Most common compose menu keys
-
-┌─────┬─────────────────┬────────────────────────────────────────────┐
-│ Key │    Function     │                Description                 │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│a    │attach-file      │attach a file                               │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│A    │attach-message   │attach message(s) to the message            │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│ESC k│attach-key       │attach a PGP public key                     │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│d    │edit-description │edit description on attachment              │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│D    │detach-file      │detach a file                               │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│t    │edit-to          │edit the To field                           │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│ESC f│edit-from        │edit the From field                         │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│r    │edit-reply-to    │edit the Reply-To field                     │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│c    │edit-cc          │edit the Cc field                           │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│b    │edit-bcc         │edit the Bcc field                          │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│y    │send-message     │send the message                            │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│s    │edit-subject     │edit the Subject                            │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│S    │smime-menu       │select S/MIME options                       │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│f    │edit-fcc         │specify an ``Fcc'' mailbox                  │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│p    │pgp-menu         │select PGP options                          │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│P    │postpone-message │postpone this message until later           │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│q    │quit             │quit (abort) sending the message            │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│w    │write-fcc        │write the message to a folder               │
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│i    │ispell           │check spelling (if available on your system)│
-├─────┼─────────────────┼────────────────────────────────────────────┤
-│^F   │forget-passphrase│wipe passphrase(s) from memory              │
-└─────┴─────────────────┴────────────────────────────────────────────┘
-
-
-Note: The attach-message function will prompt you for a folder to attach
-messages from. You can now tag messages in that folder and they will be
-attached to the message you are sending. Note that certain operations like
-composing a new mail, replying, forwarding, etc. are not permitted when you are
-in that folder. The %r in $status_format will change to a 'A' to indicate that
-you are in attach-message mode.
-
-4.1. Editing the message header
-
-When editing the header of your outgoing message, there are a couple of special
-features available.
-
-If you specify Fcc:filename Mutt will pick up filename just as if you had used
-the edit-fcc function in the compose menu.
-
-You can also attach files to your message by specifying Attach:filename [
-description ] where filename is the file to attach and description is an
-optional string to use as the description of the attached file.
-
-When replying to messages, if you remove the In-Reply-To: field from the header
-field, Mutt will not generate a References: field, which allows you to create a
-new message thread.
-
-Also see $edit_headers.
-
-4.2. Using Mutt with PGP
+to the compose menu providing the functions shown in Table 2.12, ?Most common
+compose menu keys? to modify, send or postpone the message.
+
+Table 2.12. Most common compose menu keys
+
++----------------------------------------------------------------------+
+| Key |     Function      |                Description                 |
+|-----+-------------------+--------------------------------------------|
+|a    |<attach-file>      |attach a file                               |
+|-----+-------------------+--------------------------------------------|
+|A    |<attach-message>   |attach message(s) to the message            |
+|-----+-------------------+--------------------------------------------|
+|Esc k|<attach-key>       |attach a PGP public key                     |
+|-----+-------------------+--------------------------------------------|
+|d    |<edit-description> |edit description on attachment              |
+|-----+-------------------+--------------------------------------------|
+|D    |<detach-file>      |detach a file                               |
+|-----+-------------------+--------------------------------------------|
+|t    |<edit-to>          |edit the To field                           |
+|-----+-------------------+--------------------------------------------|
+|Esc f|<edit-from>        |edit the From field                         |
+|-----+-------------------+--------------------------------------------|
+|r    |<edit-reply-to>    |edit the Reply-To field                     |
+|-----+-------------------+--------------------------------------------|
+|c    |<edit-cc>          |edit the Cc field                           |
+|-----+-------------------+--------------------------------------------|
+|b    |<edit-bcc>         |edit the Bcc field                          |
+|-----+-------------------+--------------------------------------------|
+|y    |<send-message>     |send the message                            |
+|-----+-------------------+--------------------------------------------|
+|s    |<edit-subject>     |edit the Subject                            |
+|-----+-------------------+--------------------------------------------|
+|S    |<smime-menu>       |select S/MIME options                       |
+|-----+-------------------+--------------------------------------------|
+|f    |<edit-fcc>         |specify an ?Fcc? mailbox                    |
+|-----+-------------------+--------------------------------------------|
+|p    |<pgp-menu>         |select PGP options                          |
+|-----+-------------------+--------------------------------------------|
+|P    |<postpone-message> |postpone this message until later           |
+|-----+-------------------+--------------------------------------------|
+|q    |<quit>             |quit (abort) sending the message            |
+|-----+-------------------+--------------------------------------------|
+|w    |<write-fcc>        |write the message to a folder               |
+|-----+-------------------+--------------------------------------------|
+|i    |<ispell>           |check spelling (if available on your system)|
+|-----+-------------------+--------------------------------------------|
+|^F   |<forget-passphrase>|wipe passphrase(s) from memory              |
++----------------------------------------------------------------------+
+
+
+The compose menu is also used to edit the attachments for a message which can
+be either files or other messages. The <attach-message> function to will prompt
+you for a folder to attach messages from. You can now tag messages in that
+folder and they will be attached to the message you are sending.
+
+Note
+
+Note that certain operations like composing a new mail, replying, forwarding,
+etc. are not permitted when you are in that folder. The %r in $status_format
+will change to a ?A? to indicate that you are in attach-message mode.
+
+6.2. Editing the Message Header
+
+When editing the header because of $edit_headers being set, there are a several
+pseudo headers available which will not be included in sent messages but
+trigger special Mutt behavior.
+
+6.2.1. Fcc: Pseudo Header
+
+If you specify
+
+Fcc: filename
+
+as a header, Mutt will pick up filename just as if you had used the <edit-fcc>
+function in the compose menu. It can later be changed from the compose menu.
+
+6.2.2. Attach: Pseudo Header
+
+You can also attach files to your message by specifying
+
+Attach: filename [ description ]
+
+where filename is the file to attach and description is an optional string to
+use as the description of the attached file. Spaces in filenames have to be
+escaped using backslash (?\?). The file can be removed as well as more added
+from the compose menu.
+
+6.2.3. Pgp: Pseudo Header

 
 If you want to use PGP, you can specify
 
 Pgp: [ E | S | S<id> ]
 
 
 If you want to use PGP, you can specify
 
 Pgp: [ E | S | S<id> ]
 

-``E'' encrypts, ``S'' signs and ``S<id>'' signs with the given key, setting
-$pgp_sign_as permanently.
+?E? selects encryption, ?S? selects signing and ?S<id>? selects signing with
+the given key, setting $pgp_sign_as permanently. The selection can later be
+changed in the compose menu.

 
 

-If you have told mutt to PGP encrypt a message, it will guide you through a key
-selection process when you try to send the message. Mutt will not ask you any
-questions about keys which have a certified user ID matching one of the message
-recipients' mail addresses. However, there may be situations in which there are
-several keys, weakly certified user ID fields, or where no matching keys can be
-found.
+6.2.4. In-Reply-To: Header
+
+When replying to messages, the In-Reply-To: header contains the Message-Id of
+the message(s) you reply to. If you remove or modify its value, Mutt will not
+generate a References: field, which allows you to create a new message thread,
+for example to create a new message to a mailing list without having to enter
+the mailing list's address.
+
+6.3. Sending Cryptographically Signed/Encrypted Messages
+
+If you have told Mutt to PGP or S/MIME encrypt a message, it will guide you
+through a key selection process when you try to send the message. Mutt will not
+ask you any questions about keys which have a certified user ID matching one of
+the message recipients' mail addresses. However, there may be situations in
+which there are several keys, weakly certified user ID fields, or where no
+matching keys can be found.

 
 In these cases, you are dropped into a menu with a list of keys from which you
 
 In these cases, you are dropped into a menu with a list of keys from which you

-can select one. When you quit this menu, or mutt can't find any matching keys,
+can select one. When you quit this menu, or Mutt can't find any matching keys,

 you are prompted for a user ID. You can, as usually, abort this prompt using ^
 you are prompted for a user ID. You can, as usually, abort this prompt using ^

-G. When you do so, mutt will return to the compose screen.
+G. When you do so, Mutt will return to the compose screen.

 
 Once you have successfully finished the key selection, the message will be
 
 Once you have successfully finished the key selection, the message will be

-encrypted using the selected public keys, and sent out.
+encrypted using the selected public keys when sent out.

 
 Most fields of the entries in the key selection menu (see also
 $pgp_entry_format) have obvious meanings. But some explanations on the
 capabilities, flags, and validity fields are in order.
 
 
 Most fields of the entries in the key selection menu (see also
 $pgp_entry_format) have obvious meanings. But some explanations on the
 capabilities, flags, and validity fields are in order.
 

-The flags sequence (%f) will expand to one of the flags in Table 2.10, "PGP key
-menu flags".
-
-Table 2.10. PGP key menu flags
-
-┌────┬──────────────────────────────────────────────────┐
-│Flag│                   Description                    │
-├────┼──────────────────────────────────────────────────┤
-│R   │The key has been revoked and can't be used.       │
-├────┼──────────────────────────────────────────────────┤
-│X   │The key is expired and can't be used.             │
-├────┼──────────────────────────────────────────────────┤
-│d   │You have marked the key as disabled.              │
-├────┼──────────────────────────────────────────────────┤
-│c   │There are unknown critical self-signature packets.│
-└────┴──────────────────────────────────────────────────┘
-
-
-The capabilities field (%c) expands to a two-character sequence representing a
-key's capabilities. The first character gives the key's encryption
-capabilities: A minus sign (-) means that the key cannot be used for
-encryption. A dot (.) means that it's marked as a signature key in one of the
-user IDs, but may also be used for encryption. The letter e indicates that this
-key can be used for encryption.
-
-The second character indicates the key's signing capabilities. Once again, a ``
--'' implies ``not for signing'', ``.'' implies that the key is marked as an
-encryption key in one of the user-ids, and ``s'' denotes a key which can be
-used for signing.
+The flags sequence (?%f?) will expand to one of the flags in Table 2.13, ?PGP
+key menu flags?.

 
 

-Finally, the validity field (%t) indicates how well-certified a user-id is. A
-question mark (?) indicates undefined validity, a minus character (-) marks an
-untrusted association, a space character means a partially trusted association,
-and a plus character (+) indicates complete validity.
+Table 2.13. PGP key menu flags

 
 

-4.3. Sending anonymous messages via mixmaster.
++-------------------------------------------------------+
+|Flag|                   Description                    |
+|----+--------------------------------------------------|
+|R   |The key has been revoked and can't be used.       |
+|----+--------------------------------------------------|
+|X   |The key is expired and can't be used.             |
+|----+--------------------------------------------------|
+|d   |You have marked the key as disabled.              |
+|----+--------------------------------------------------|
+|c   |There are unknown critical self-signature packets.|
++-------------------------------------------------------+

 
 

-You may also have configured mutt to co-operate with Mixmaster, an anonymous
-remailer. Mixmaster permits you to send your messages anonymously using a chain
-of remailers. Mixmaster support in mutt is for mixmaster version 2.04 (beta 45
-appears to be the latest) and 2.03. It does not support earlier versions or the
-later so-called version 3 betas, of which the latest appears to be called
-2.9b23.
-
-To use it, you'll have to obey certain restrictions. Most important, you cannot
-use the Cc and Bcc headers. To tell Mutt to use mixmaster, you have to select a
-remailer chain, using the mix function on the compose menu.

 
 

-The chain selection screen is divided into two parts. In the (larger) upper
-part, you get a list of remailers you may use. In the lower part, you see the
-currently selected chain of remailers.
+The capabilities field (?%c?) expands to a two-character sequence representing
+a key's capabilities. The first character gives the key's encryption
+capabilities: A minus sign (?-?) means that the key cannot be used for
+encryption. A dot (?.?) means that it's marked as a signature key in one of the
+user IDs, but may also be used for encryption. The letter ?e? indicates that
+this key can be used for encryption.

 
 

-You can navigate in the chain using the chain-prev and chain-next functions,
-which are by default bound to the left and right arrows and to the h and l keys
-(think vi keyboard bindings). To insert a remailer at the current chain
-position, use the insert function. To append a remailer behind the current
-chain position, use select-entry or append. You can also delete entries from
-the chain, using the corresponding function. Finally, to abandon your changes,
-leave the menu, or accept them pressing (by default) the Return key.
+The second character indicates the key's signing capabilities. Once again, a
+?-? implies ?not for signing?, ?.? implies that the key is marked as an
+encryption key in one of the user-ids, and ?s? denotes a key which can be used
+for signing.

 
 

-Note that different remailers do have different capabilities, indicated in the
-%c entry of the remailer menu lines (see $mix_entry_format). Most important is
-the ``middleman'' capability, indicated by a capital ``M'': This means that the
-remailer in question cannot be used as the final element of a chain, but will
-only forward messages to other mixmaster remailers. For details on the other
-capabilities, please have a look at the mixmaster documentation.
+Finally, the validity field (?%t?) indicates how well-certified a user-id is. A
+question mark (???) indicates undefined validity, a minus character (?-?) marks
+an untrusted association, a space character means a partially trusted
+association, and a plus character (?+?) indicates complete validity.

 
 

-4.4. Sending format=flowed messages
+6.4. Sending Format=Flowed Messages

 
 

-4.4.1. Concept
+6.4.1. Concept

 
 format=flowed-style messages (or f=f for short) are text/plain messages that
 consist of paragraphs which a receiver's mail client may reformat to its own
 needs which mostly means to customize line lengths regardless of what the
 
 format=flowed-style messages (or f=f for short) are text/plain messages that
 consist of paragraphs which a receiver's mail client may reformat to its own
 needs which mostly means to customize line lengths regardless of what the

-sender sent. Technically this is achieved by letting lines of a ``flowable''
-paragraph end in spaces.
+sender sent. Technically this is achieved by letting lines of a ?flowable?
+paragraph end in spaces except for the last line.

 
 

-While for text-mode clients like mutt it's the best way to assume only a
+While for text-mode clients like Mutt it's the best way to assume only a

 standard 80x25 character cell terminal, it may be desired to let the receiver
 decide completely how to view a message.
 
 standard 80x25 character cell terminal, it may be desired to let the receiver
 decide completely how to view a message.
 

-4.4.2. Mutt support
+6.4.2. Mutt Support

 
 Mutt only supports setting the required format=flowed MIME parameter on
 
 Mutt only supports setting the required format=flowed MIME parameter on

-outgoing messages if the $text_flowed variable is set. It does not add the
-trailing spaces nor does it provide any other feature related to composing f=f
-messages (like reformatting non-f=f parts of a reply to f=f before calling the
-editor).
+outgoing messages if the $text_flowed variable is set, specifically it does not
+add the trailing spaces.

 
 After editing the initial message text and before entering the compose menu,
 
 After editing the initial message text and before entering the compose menu,

-mutt properly space-stuffes the message. Space-stuffing is required by RfC3676
+Mutt properly space-stuffes the message. Space-stuffing is required by RfC3676

 defining format=flowed and means to prepend a space to:
 
 defining format=flowed and means to prepend a space to:
 

-  ● all lines starting with a space
+  * all lines starting with a space

 
 

-  ● lines starting with the word ``From'' followed by space
+  * lines starting with the word ?From? followed by space

 
 

-  ● all lines starting with ``>'' which is not intended to be a quote character
+  * all lines starting with ?>? which is not intended to be a quote character

 
 

-All leading spaces are to be removed by receiving clients to restore the
-original message.
+Note
+
+Mutt only supports space-stuffing for the first two types of lines but not for
+the third: It is impossible to safely detect whether a leading > character
+starts a quote or not. Furthermore, Mutt only applies space-stuffing once after
+the initial edit is finished.

 
 

-Note that mutt only support space-stuffing for the first two types of lines but
-not for the third: It is impossible to safely detect whether a leading >
-character starts a quote or not.
+All leading spaces are to be removed by receiving clients to restore the
+original message prior to further processing.

 
 

-4.4.3. Editor considerations
+6.4.3. Editor Considerations

 
 

-As mutt provides no additional features to compose f=f messages, it's
+As Mutt provides no additional features to compose f=f messages, it's

 completely up to the user and his editor to produce proper messages. Please
 consider your editor's documentation if you intend to send f=f messages.
 
 completely up to the user and his editor to produce proper messages. Please
 consider your editor's documentation if you intend to send f=f messages.
 


@@ -1436,25 +1744,15 @@ properly space-stuffed.
 For example, vim provides the w flag for its formatoptions setting to assist in
 creating f=f messages, see :help fo-table for details.
 
 For example, vim provides the w flag for its formatoptions setting to assist in
 creating f=f messages, see :help fo-table for details.
 

-5. Forwarding and Bouncing Mail
+7. Forwarding and Bouncing Mail

 
 Bouncing and forwarding let you send an existing message to recipients that you
 
 Bouncing and forwarding let you send an existing message to recipients that you

-specify. Bouncing a message uses the $sendmail command to send a copy to
-alternative addresses as if they were the message's original recipients.
-Forwarding a message, on the other hand, allows you to modify the message
-before it is resent (for example, by adding your own comments). The default key
-bindings are shown in Table 2.11, "Message forwarding/bouncing keys".
-
-Table 2.11. Message forwarding/bouncing keys
-
-┌───┬────────┬───────────────────────┐
-│Key│Function│      Description      │
-├───┼────────┼───────────────────────┤
-│f  │forward │forward message        │
-├───┼────────┼───────────────────────┤
-│b  │bounce  │bounce (remail) message│
-└───┴────────┴───────────────────────┘
-
+specify. Bouncing a message sends a verbatim copy of a message to alternative
+addresses as if they were the message's original recipients specified in the
+Bcc header. Forwarding a message, on the other hand, allows you to modify the
+message before it is resent (for example, by adding your own comments).
+Bouncing is done using the <bounce> function and forwarding using the <forward>
+function bound to ?b? and ?f? respectively.

 
 Forwarding can be done by including the original message in the new message's
 body (surrounded by indicating lines) or including it as a MIME attachment,
 
 Forwarding can be done by including the original message in the new message's
 body (surrounded by indicating lines) or including it as a MIME attachment,


@@ -1462,7 +1760,7 @@ depending on the value of the $mime_forward variable. Decoding of attachments,
 like in the pager, can be controlled by the $forward_decode and
 $mime_forward_decode variables, respectively. The desired forwarding format may
 depend on the content, therefore $mime_forward is a quadoption which, for
 like in the pager, can be controlled by the $forward_decode and
 $mime_forward_decode variables, respectively. The desired forwarding format may
 depend on the content, therefore $mime_forward is a quadoption which, for

-example, can be set to ``ask-no''.
+example, can be set to ?ask-no?.

 
 The inclusion of headers is controlled by the current setting of the $weed
 variable, unless $mime_forward is set.
 
 The inclusion of headers is controlled by the current setting of the $weed
 variable, unless $mime_forward is set.


@@ -1470,24 +1768,26 @@ variable, unless $mime_forward is set.
 Editing the message to forward follows the same procedure as sending or
 replying to a message does.
 
 Editing the message to forward follows the same procedure as sending or
 replying to a message does.
 

-6. Postponing Mail
+8. Postponing Mail

 
 At times it is desirable to delay sending a message that you have already begun
 
 At times it is desirable to delay sending a message that you have already begun

-to compose. When the postpone-message function is used in the compose menu, the
-body of your message and attachments are stored in the mailbox specified by the
-$postponed variable. This means that you can recall the message even if you
+to compose. When the <postpone-message> function is used in the compose menu,
+the body of your message and attachments are stored in the mailbox specified by
+the $postponed variable. This means that you can recall the message even if you

 exit Mutt and then restart it at a later time.
 
 Once a message is postponed, there are several ways to resume it. From the
 exit Mutt and then restart it at a later time.
 
 Once a message is postponed, there are several ways to resume it. From the

-command line you can use the ``-p'' option, or if you compose a new message
-from the index or pager you will be prompted if postponed messages exist. If
+command line you can use the ?-p? option, or if you compose a new message from
+the index or pager you will be prompted if postponed messages exist. If

 multiple messages are currently postponed, the postponed menu will pop up and
 you can select which message you would like to resume.
 
 multiple messages are currently postponed, the postponed menu will pop up and
 you can select which message you would like to resume.
 

-Note: If you postpone a reply to a message, the reply setting of the message is
-only updated when you actually finish the message and send it. Also, you must
-be in the same folder with the message you replied to for the status of the
-message to be updated.
+Note
+
+If you postpone a reply to a message, the reply setting of the message is only
+updated when you actually finish the message and send it. Also, you must be in
+the same folder with the message you replied to for the status of the message
+to be updated.

 
 See also the $postpone quad-option.
 
 
 See also the $postpone quad-option.
 


@@ -1495,128 +1795,184 @@ Chapter 3. Configuration
 
 Table of Contents
 
 
 Table of Contents
 

-1. Syntax of Initialization Files
-2. Address groups
-3. Defining/Using aliases
-4. Changing the default key bindings
-5. Defining aliases for character sets
-6. Setting variables based upon mailbox
-7. Keyboard macros
-8. Using color and mono video attributes
-9. Ignoring (weeding) unwanted message headers
-10. Alternative addresses
-11. Mailing lists
-12. Using Multiple spool mailboxes
-13. Monitoring incoming mail
-14. User defined headers
-15. Defining the order of headers when viewing messages
-16. Specify default save mailbox
-17. Specify default Fcc: mailbox when composing
-18. Specify default save filename and default Fcc: mailbox at once
-19. Change settings based upon message recipients
-20. Change settings before formatting a message
-21. Choosing the cryptographic key of the recipient
-22. Adding key sequences to the keyboard buffer
-23. Executing functions
+1. Location of Initialization Files
+2. Syntax of Initialization Files
+3. Address Groups
+4. Defining/Using Aliases
+5. Changing the Default Key Bindings
+6. Defining Aliases for Character Sets
+7. Setting Variables Based Upon Mailbox
+8. Keyboard Macros
+9. Using Color and Mono Video Attributes
+10. Message Header Display
+
+    10.1. Selecting Headers
+    10.2. Ordering Displayed Headers
+
+11. Alternative Addresses
+12. Mailing Lists
+13. Using Multiple Spool Mailboxes
+14. Monitoring Incoming Mail
+15. User-Defined Headers
+16. Specify Default Save Mailbox
+17. Specify Default Fcc: Mailbox When Composing
+18. Specify Default Save Filename and Default Fcc: Mailbox at Once
+19. Change Settings Based Upon Message Recipients
+20. Change Settings Before Formatting a Message
+21. Choosing the Cryptographic Key of the Recipient
+22. Adding Key Sequences to the Keyboard Buffer
+23. Executing Functions

 24. Message Scoring
 24. Message Scoring

-25. Spam detection
+25. Spam Detection

 26. Setting and Querying Variables
 
 26. Setting and Querying Variables
 

-    26.1. Commands
-    26.2. User-defined variables
+    26.1. Variable Types
+    26.2. Commands
+    26.3. User-Defined Variables

 
 

-27. Reading initialization commands from another file
-28. Removing hooks
+27. Reading Initialization Commands From Another File
+28. Removing Hooks

 29. Format Strings
 
     29.1. Basic usage
 29. Format Strings
 
     29.1. Basic usage

-    29.2. Filters
+    29.2. Conditionals
+    29.3. Filters
+    29.4. Padding
+
+1. Location of Initialization Files

 
 

-While the default configuration (or ``preferences'') make Mutt usable right out
+While the default configuration (or ?preferences?) make Mutt usable right out

 of the box, it is often desirable to tailor Mutt to suit your own tastes. When
 of the box, it is often desirable to tailor Mutt to suit your own tastes. When

-Mutt is first invoked, it will attempt to read the ``system'' configuration
-file (defaults set by your local system administrator), unless the ``-n''
-command line option is specified. This file is typically /usr/local/share/mutt/
-Muttrc or /etc/Muttrc. Mutt will next look for a file named .muttrc in your
-home directory. If this file does not exist and your home directory has a
-subdirectory named .mutt, mutt try to load a file named .mutt/muttrc.
+Mutt is first invoked, it will attempt to read the ?system? configuration file
+(defaults set by your local system administrator), unless the ?-n? command line
+option is specified. This file is typically /usr/local/share/mutt/Muttrc or /
+etc/Muttrc. Mutt will next look for a file named .muttrc in your home
+directory. If this file does not exist and your home directory has a
+subdirectory named .mutt, Mutt tries to load a file named .mutt/muttrc.

 
 .muttrc is the file where you will usually place your commands to configure
 Mutt.
 
 
 .muttrc is the file where you will usually place your commands to configure
 Mutt.
 

-In addition, mutt supports version specific configuration files that are parsed
+In addition, Mutt supports version specific configuration files that are parsed

 instead of the default files as explained above. For instance, if your system
 has a Muttrc-0.88 file in the system configuration directory, and you are
 instead of the default files as explained above. For instance, if your system
 has a Muttrc-0.88 file in the system configuration directory, and you are

-running version 0.88 of mutt, this file will be sourced instead of the Muttrc
+running version 0.88 of Mutt, this file will be sourced instead of the Muttrc

 file. The same is true of the user configuration file, if you have a file
 file. The same is true of the user configuration file, if you have a file

-.muttrc-0.88.6 in your home directory, when you run mutt version 0.88.6, it
+.muttrc-0.88.6 in your home directory, when you run Mutt version 0.88.6, it

 will source this file instead of the default .muttrc file. The version number
 will source this file instead of the default .muttrc file. The version number

-is the same which is visible using the ``-v'' command line switch or using the
+is the same which is visible using the ?-v? command line switch or using the

 show-version key (default: V) from the index menu.
 
 show-version key (default: V) from the index menu.
 

-1. Syntax of Initialization Files
+2. Syntax of Initialization Files

 
 An initialization file consists of a series of commands. Each line of the file
 may contain one or more commands. When multiple commands are used, they must be
 
 An initialization file consists of a series of commands. Each line of the file
 may contain one or more commands. When multiple commands are used, they must be

-separated by a semicolon (;).
+separated by a semicolon (?;?).
+
+Example 3.1. Multiple configuration commands per line

 
 set realname='Mutt user' ; ignore x-
 
 
 set realname='Mutt user' ; ignore x-
 

-The hash mark, or pound sign (``#''), is used as a ``comment'' character. You
-can use it to annotate your initialization file. All text after the comment
-character to the end of the line is ignored. For example,
+
+The hash mark, or pound sign (?#?), is used as a ?comment? character. You can
+use it to annotate your initialization file. All text after the comment
+character to the end of the line is ignored.
+
+Example 3.2. Commenting configuration files

 
 my_hdr X-Disclaimer: Why are you listening to me? # This is a comment
 
 
 my_hdr X-Disclaimer: Why are you listening to me? # This is a comment
 

-Single quotes (') and double quotes (") can be used to quote strings which
+
+Single quotes (?'?) and double quotes (?"?) can be used to quote strings which

 contain spaces or other special characters. The difference between the two
 types of quotes is similar to that of many popular shell programs, namely that
 a single quote is used to specify a literal string (one that is not interpreted
 for shell variables or quoting with a backslash [see next paragraph]), while
 double quotes indicate a string for which should be evaluated. For example,
 contain spaces or other special characters. The difference between the two
 types of quotes is similar to that of many popular shell programs, namely that
 a single quote is used to specify a literal string (one that is not interpreted
 for shell variables or quoting with a backslash [see next paragraph]), while
 double quotes indicate a string for which should be evaluated. For example,

-backtics are evaluated inside of double quotes, but not for single quotes.
+backticks are evaluated inside of double quotes, but not for single quotes.

 
 

-\ quotes the next character, just as in shells such as bash and zsh. For
-example, if want to put quotes ``"'' inside of a string, you can use ``\'' to
-force the next character to be a literal instead of interpreted character.
+?\? quotes the next character, just as in shells such as bash and zsh. For
+example, if want to put quotes ?"? inside of a string, you can use ?\? to force
+the next character to be a literal instead of interpreted character.
+
+Example 3.3. Escaping quotes in congfiguration files

 
 set realname="Michael \"MuttDude\" Elkins"
 
 
 set realname="Michael \"MuttDude\" Elkins"
 

-``\\'' means to insert a literal ``\'' into the line. ``\n'' and ``\r'' have
-their usual C meanings of linefeed and carriage-return, respectively.

 
 

-A \ at the end of a line can be used to split commands over multiple lines,
-provided that the split points don't appear in the middle of command names.
+?\\? means to insert a literal ?\? into the line. ?\n? and ?\r? have their
+usual C meanings of linefeed and carriage-return, respectively.
+
+A ?\? at the end of a line can be used to split commands over multiple lines as
+it ?escapes? the line end, provided that the split points don't appear in the
+middle of command names. Lines are first concatenated before interpretation so
+that a multi-line can be commented by commenting out the first line only.
+
+Example 3.4. Splitting long configuration commands over several lines
+
+set status_format="some very \
+long value split \
+over several lines"
+

 
 It is also possible to substitute the output of a Unix command in an
 
 It is also possible to substitute the output of a Unix command in an

-initialization file. This is accomplished by enclosing the command in
-backquotes (``). For example,
+initialization file. This is accomplished by enclosing the command in backticks
+(``). In Example 3.5, ?Using external command's output in configuration files?,
+the output of the Unix command ?uname -a? will be substituted before the line
+is parsed. Since initialization files are line oriented, only the first line of
+output from the Unix command will be substituted.
+
+Example 3.5. Using external command's output in configuration files

 
 my_hdr X-Operating-System: `uname -a`
 
 
 my_hdr X-Operating-System: `uname -a`
 

-The output of the Unix command ``uname -a'' will be substituted before the line
-is parsed. Note that since initialization files are line oriented, only the
-first line of output from the Unix command will be substituted.

 
 

-Both environment variables and mutt variables can be accessed by prepending
-``$'' to the name of the variable. For example,
+Both environment variables and Mutt variables can be accessed by prepending ?$?
+to the name of the variable. For example,
+
+Example 3.6. Using environment variables in configuration files

 
 set record=+sent_on_$HOSTNAME
 
 
 set record=+sent_on_$HOSTNAME
 

-will cause mutt to save outgoing messages to a folder named ``sent_on_kremvax''
-if the environment variable HOSTNAME is set to ``kremvax.'' (See $record for
+
+will cause Mutt to save outgoing messages to a folder named ?sent_on_kremvax?
+if the environment variable $HOSTNAME is set to ?kremvax.? (See $record for

 details.)
 
 Mutt expands the variable when it is assigned, not when it is used. If the
 value of a variable on the right-hand side of an assignment changes after the
 assignment, the variable on the left-hand side will not be affected.
 
 details.)
 
 Mutt expands the variable when it is assigned, not when it is used. If the
 value of a variable on the right-hand side of an assignment changes after the
 assignment, the variable on the left-hand side will not be affected.
 

-The commands understood by mutt are explained in the next paragraphs. For a
+The commands understood by Mutt are explained in the next paragraphs. For a

 complete list, see the command reference.
 
 complete list, see the command reference.
 

-2. Address groups
+All configuration files are expected to be in the current locale as specified
+by the $charset variable which doesn't have a default value since it's
+determined by Mutt at startup. If a configuration file is not encoded in the
+same character set the $config_charset variable should be used: all lines
+starting with the next are recoded from $config_charset to $charset.
+
+This mechanism should be avoided if possible as it has the following
+implications:
+
+  * These variables should be set early in a configuration file with $charset
+    preceding $config_charset so Mutt knows what character set to convert to.
+
+  * If $config_charset is set, it should be set in each configuration file
+    because the value is global and not per configuration file.
+
+  * Because Mutt first recodes a line before it attempts to parse it, a
+    conversion introducing question marks or other characters as part of errors
+    (unconvertable characters, transliteration) may introduce syntax errors or
+    silently change the meaning of certain tokens (e.g. inserting question
+    marks into regular expressions).

 
 

-Usage: group [ -groupname [ ... ] ] [ -rxEXPR [ ... ] ] [ -addrEXPR [ ... ] ]
+3. Address Groups
+
+Usage:
+
+group [ -group name ...] { -rx expr ... | -addr expr ... }
+ungroup [ -group name ...] { * | -rx expr ... | -addr expr ... }

 
 group is used to directly add either addresses or regular expressions to the
 specified group or groups. The different categories of arguments to the group
 
 group is used to directly add either addresses or regular expressions to the
 specified group or groups. The different categories of arguments to the group


@@ -1624,36 +1980,36 @@ command can be in any order. The flags -rx and -addr specify what the following
 strings (that cannot begin with a hyphen) should be interpreted as: either a
 regular expression or an email address, respectively.
 
 strings (that cannot begin with a hyphen) should be interpreted as: either a
 regular expression or an email address, respectively.
 

-These address groups can also be created implicitely by the alias, lists,
+These address groups can also be created implicitly by the alias, lists,

 subscribe and alternates commands by specifying the optional -group option.
 
 Once defined, these address groups can be used in patterns to search for and
 limit the display to messages matching a group.
 
 subscribe and alternates commands by specifying the optional -group option.
 
 Once defined, these address groups can be used in patterns to search for and
 limit the display to messages matching a group.
 

-Usage: ungroup [ -groupname [ ... ] ] [ * | [ [ -rxEXPR [ ... ] ] [ -addrEXPR [
-... ] ] ]
-

 ungroup is used to remove addresses or regular expressions from the specified
 group or groups. The syntax is similar to the group command, however the
 special character * can be used to empty a group of all of its contents.
 
 ungroup is used to remove addresses or regular expressions from the specified
 group or groups. The syntax is similar to the group command, however the
 special character * can be used to empty a group of all of its contents.
 

-3. Defining/Using aliases
+4. Defining/Using Aliases
+
+Usage:

 
 

-Usage: alias [ -groupname [ ... ] ] keyaddress [ , address, ... ]
+alias [ -group name ...] key address [ address ...]
+unalias [ -group name ...] { * | key ... }

 
 It's usually very cumbersome to remember or type out the address of someone you
 
 It's usually very cumbersome to remember or type out the address of someone you

-are communicating with. Mutt allows you to create ``aliases'' which map a short
+are communicating with. Mutt allows you to create ?aliases? which map a short

 string to a full address.
 
 string to a full address.
 

-Note: if you want to create an alias for more than one address, you must
-separate the addresses with a comma (``,'').
+Note
+
+If you want to create an alias for more than one address, you must separate the
+addresses with a comma (?,?).

 
 The optional -group argument to alias causes the aliased address(es) to be
 added to the named group.
 
 
 The optional -group argument to alias causes the aliased address(es) to be
 added to the named group.
 

-To remove an alias or aliases (``*'' means all aliases):
-
-unalias [ * | key... ]
+To remove an alias or aliases (?*? means all aliases):

 
 alias muttdude me@cs.hmc.edu (Michael Elkins)
 alias theguys manny, moe, jack
 
 alias muttdude me@cs.hmc.edu (Michael Elkins)
 alias theguys manny, moe, jack


@@ -1661,38 +2017,41 @@ alias theguys manny, moe, jack
 Unlike other mailers, Mutt doesn't require aliases to be defined in a special
 file. The alias command can appear anywhere in a configuration file, as long as
 this file is sourced. Consequently, you can have multiple alias files, or you
 Unlike other mailers, Mutt doesn't require aliases to be defined in a special
 file. The alias command can appear anywhere in a configuration file, as long as
 this file is sourced. Consequently, you can have multiple alias files, or you

-can have all aliases defined in your muttrc.
+can have all aliases defined in your .muttrc.

 
 

-On the other hand, the create-alias function can use only one file, the one
-pointed to by the $alias_file variable (which is ~/.muttrc by default). This
+On the other hand, the <create-alias> function can use only one file, the one
+pointed to by the $alias_file variable (which is ?/.muttrc by default). This

 file is not special either, in the sense that Mutt will happily append aliases
 to any file, but in order for the new aliases to take effect you need to
 explicitly source this file too.
 
 file is not special either, in the sense that Mutt will happily append aliases
 to any file, but in order for the new aliases to take effect you need to
 explicitly source this file too.
 

-For example:
+Example 3.7. Configuring external alias files

 
 source /usr/local/share/Mutt.aliases
 source ~/.mail_aliases
 set alias_file=~/.mail_aliases
 
 
 source /usr/local/share/Mutt.aliases
 source ~/.mail_aliases
 set alias_file=~/.mail_aliases
 

-To use aliases, you merely use the alias at any place in mutt where mutt
+
+To use aliases, you merely use the alias at any place in Mutt where Mutt

 prompts for addresses, such as the To: or Cc: prompt. You can also enter
 aliases in your editor at the appropriate headers if you have the $edit_headers
 variable set.
 
 In addition, at the various address prompts, you can use the tab character to
 prompts for addresses, such as the To: or Cc: prompt. You can also enter
 aliases in your editor at the appropriate headers if you have the $edit_headers
 variable set.
 
 In addition, at the various address prompts, you can use the tab character to

-expand a partial alias to the full alias. If there are multiple matches, mutt
+expand a partial alias to the full alias. If there are multiple matches, Mutt

 will bring up a menu with the matching aliases. In order to be presented with
 will bring up a menu with the matching aliases. In order to be presented with

-the full list of aliases, you must hit tab with out a partial alias, such as at
+the full list of aliases, you must hit tab without a partial alias, such as at

 the beginning of the prompt or after a comma denoting multiple addresses.
 
 In the alias menu, you can select as many aliases as you want with the
 the beginning of the prompt or after a comma denoting multiple addresses.
 
 In the alias menu, you can select as many aliases as you want with the

-select-entry key (default: RET), and use the exit key (default: q) to return to
-the address prompt.
+select-entry key (default: <Return>), and use the exit key (default: q) to
+return to the address prompt.
+
+5. Changing the Default Key Bindings

 
 

-4. Changing the default key bindings
+Usage:

 
 

-Usage: bindmapkeyfunction
+bind map key function

 
 This command allows you to change the default key bindings (operation invoked
 when pressing a key).
 
 This command allows you to change the default key bindings (operation invoked
 when pressing a key).


@@ -1712,8 +2071,8 @@ generic
 alias
 
     The alias menu is the list of your personal aliases as defined in your
 alias
 
     The alias menu is the list of your personal aliases as defined in your

-    muttrc. It is the mapping from a short alias name to the full email address
-    (es) of the recipient(s).
+    .muttrc. It is the mapping from a short alias name to the full email
+    address(es) of the recipient(s).

 
 attach
 
 
 attach
 


@@ -1743,7 +2102,12 @@ pager
 
 pgp
 
 
 pgp
 

-    The pgp menu is used to select the OpenPGP keys used for encrypting
+    The pgp menu is used to select the OpenPGP keys used to encrypt outgoing
+    messages.
+
+smime
+
+    The smime menu is used to select the OpenSSL certificates used to encrypt

     outgoing messages.
 
 postpone
     outgoing messages.
 
 postpone


@@ -1751,131 +2115,159 @@ postpone
     The postpone menu is similar to the index menu, except is used when
     recalling a message the user was composing, but saved until later.
 
     The postpone menu is similar to the index menu, except is used when
     recalling a message the user was composing, but saved until later.
 

+query
+
+    The query menu is the browser for results returned by $query_command.
+
+mix
+
+    The mixmaster screen is used to select remailer options for outgoing
+    messages (if Mutt is compiled with Mixmaster support).
+

 key is the key (or key sequence) you wish to bind. To specify a control
 character, use the sequence \Cx, where x is the letter of the control character
 key is the key (or key sequence) you wish to bind. To specify a control
 character, use the sequence \Cx, where x is the letter of the control character

-(for example, to specify control-A use ``\Ca''). Note that the case of x as
-well as \C is ignored, so that \CA, \Ca, \cA and \ca are all equivalent. An
+(for example, to specify control-A use ?\Ca?). Note that the case of x as well
+as \C is ignored, so that \CA, \Ca, \cA and \ca are all equivalent. An

 alternative form is to specify the key as a three digit octal number prefixed
 alternative form is to specify the key as a three digit octal number prefixed

-with a ``\'' (for example \177 is equivalent to \c?). In addition, key may be a
-symbolic name as shown in Table 3.1, "Symbolic key names".
+with a ?\? (for example \177 is equivalent to \c?). In addition, key may be a
+symbolic name as shown in Table 3.1, ?Symbolic key names?.

 
 Table 3.1. Symbolic key names
 
 
 Table 3.1. Symbolic key names
 

-┌─────────────┬───────────────────┐
-│Symbolic name│      Meaning      │
-├─────────────┼───────────────────┤
-│\t           │tab                │
-├─────────────┼───────────────────┤
-│<tab>        │tab                │
-├─────────────┼───────────────────┤
-│<backtab>    │backtab / shift-tab│
-├─────────────┼───────────────────┤
-│\r           │carriage return    │
-├─────────────┼───────────────────┤
-│\n           │newline            │
-├─────────────┼───────────────────┤
-│\e           │escape             │
-├─────────────┼───────────────────┤
-│<esc>        │escape             │
-├─────────────┼───────────────────┤
-│<up>         │up arrow           │
-├─────────────┼───────────────────┤
-│<down>       │down arrow         │
-├─────────────┼───────────────────┤
-│<left>       │left arrow         │
-├─────────────┼───────────────────┤
-│<right>      │right arrow        │
-├─────────────┼───────────────────┤
-│<pageup>     │Page Up            │
-├─────────────┼───────────────────┤
-│<pagedown>   │Page Down          │
-├─────────────┼───────────────────┤
-│<backspace>  │Backspace          │
-├─────────────┼───────────────────┤
-│<delete>     │Delete             │
-├─────────────┼───────────────────┤
-│<insert>     │Insert             │
-├─────────────┼───────────────────┤
-│<enter>      │Enter              │
-├─────────────┼───────────────────┤
-│<return>     │Return             │
-├─────────────┼───────────────────┤
-│<home>       │Home               │
-├─────────────┼───────────────────┤
-│<end>        │End                │
-├─────────────┼───────────────────┤
-│<space>      │Space bar          │
-├─────────────┼───────────────────┤
-│<f1>         │function key 1     │
-├─────────────┼───────────────────┤
-│<f10>        │function key 10    │
-└─────────────┴───────────────────┘
-
-
-key does not need to be enclosed in quotes unless it contains a space (`` '').
++---------------------------------+
+|Symbolic name|      Meaning      |
+|-------------+-------------------|
+|\t           |tab                |
+|-------------+-------------------|
+|<tab>        |tab                |
+|-------------+-------------------|
+|<backtab>    |backtab / shift-tab|
+|-------------+-------------------|
+|\r           |carriage return    |
+|-------------+-------------------|
+|\n           |newline            |
+|-------------+-------------------|
+|\e           |escape             |
+|-------------+-------------------|
+|<esc>        |escape             |
+|-------------+-------------------|
+|<up>         |up arrow           |
+|-------------+-------------------|
+|<down>       |down arrow         |
+|-------------+-------------------|
+|<left>       |left arrow         |
+|-------------+-------------------|
+|<right>      |right arrow        |
+|-------------+-------------------|
+|<pageup>     |Page Up            |
+|-------------+-------------------|
+|<pagedown>   |Page Down          |
+|-------------+-------------------|
+|<backspace>  |Backspace          |
+|-------------+-------------------|
+|<delete>     |Delete             |
+|-------------+-------------------|
+|<insert>     |Insert             |
+|-------------+-------------------|
+|<enter>      |Enter              |
+|-------------+-------------------|
+|<return>     |Return             |
+|-------------+-------------------|
+|<home>       |Home               |
+|-------------+-------------------|
+|<end>        |End                |
+|-------------+-------------------|
+|<space>      |Space bar          |
+|-------------+-------------------|
+|<f1>         |function key 1     |
+|-------------+-------------------|
+|<f10>        |function key 10    |
++---------------------------------+
+
+
+key does not need to be enclosed in quotes unless it contains a space (???) or
+semi-colon (?;?).

 
 function specifies which action to take when key is pressed. For a complete
 
 function specifies which action to take when key is pressed. For a complete

-list of functions, see the reference. The special function noop unbinds the
+list of functions, see the reference. The special function <noop> unbinds the

 specified key sequence.
 
 specified key sequence.
 

-5. Defining aliases for character sets
+6. Defining Aliases for Character Sets

 
 

+Usage:

 
 

-Usage: charset-hook alias charset
-Usage: iconv-hook charset local-charset
+charset-hook alias charset
+iconv-hook charset local-charset

 
 The charset-hook command defines an alias for a character set. This is useful
 to properly display messages which are tagged with a character set name not
 
 The charset-hook command defines an alias for a character set. This is useful
 to properly display messages which are tagged with a character set name not

-known to mutt.
+known to Mutt.

 
 The iconv-hook command defines a system-specific name for a character set. This
 is helpful when your systems character conversion library insists on using
 strange, system-specific names for character sets.
 
 
 The iconv-hook command defines a system-specific name for a character set. This
 is helpful when your systems character conversion library insists on using
 strange, system-specific names for character sets.
 

-6. Setting variables based upon mailbox
+7. Setting Variables Based Upon Mailbox

 
 

-Usage: folder-hook [!]regexpcommand
+Usage:
+
+folder-hook [!]regexp command

 
 It is often desirable to change settings based on which mailbox you are
 reading. The folder-hook command provides a method by which you can execute any
 configuration command. regexp is a regular expression specifying in which
 mailboxes to execute command before loading. If a mailbox matches multiple
 
 It is often desirable to change settings based on which mailbox you are
 reading. The folder-hook command provides a method by which you can execute any
 configuration command. regexp is a regular expression specifying in which
 mailboxes to execute command before loading. If a mailbox matches multiple

-folder-hook's, they are executed in the order given in the muttrc.
+folder-hooks, they are executed in the order given in the .muttrc.
+
+Note

 
 

-Note: if you use the ``!'' shortcut for $spoolfile at the beginning of the
-pattern, you must place it inside of double or single quotes in order to
-distinguish it from the logical not operator for the expression.
+If you use the ?!? shortcut for $spoolfile at the beginning of the pattern, you
+must place it inside of double or single quotes in order to distinguish it from
+the logical not operator for the expression.

 
 

-Note that the settings are not restored when you leave the mailbox. For
-example, a command action to perform is to change the sorting method based upon
-the mailbox being read:
+Note

 
 

-folder-hook mutt set sort=threads
+Settings are not restored when you leave the mailbox. For example, a command
+action to perform is to change the sorting method based upon the mailbox being
+read:
+
+folder-hook mutt "set sort=threads"

 
 However, the sorting method is not restored to its previous value when reading
 
 However, the sorting method is not restored to its previous value when reading

-a different mailbox. To specify a default command, use the pattern ``.'':
+a different mailbox. To specify a default command, use the pattern ?.? before
+other folder-hooks adjusting a value on a per-folder basis because folder-hooks
+are evaluated in the order given in the configuration file.
+
+The following example will set the sort variable to date-sent for all folders
+but to threads for all folders containing ?mutt? in their name.
+
+Example 3.8. Setting sort method based on mailbox name
+
+folder-hook . "set sort=date-sent"
+folder-hook mutt "set sort=threads"

 
 

-folder-hook . set sort=date-sent

 
 

-7. Keyboard macros
+8. Keyboard Macros

 
 

-Usage: macromenukeysequence [ description ]
+Usage:
+
+macro menu key sequence [ description ]

 
 Macros are useful when you would like a single key to perform a series of
 actions. When you press key in menu menu, Mutt will behave as if you had typed
 sequence. So if you have a common sequence of commands you type, you can create
 
 Macros are useful when you would like a single key to perform a series of
 actions. When you press key in menu menu, Mutt will behave as if you had typed
 sequence. So if you have a common sequence of commands you type, you can create

-a macro to execute those commands with a single key.
+a macro to execute those commands with a single key or fewer keys.

 
 

-menu is the map which the macro will be bound. Multiple maps may be specified
-by separating multiple menu arguments by commas. Whitespace may not be used in
-between the menu arguments and the commas separating them.
+menu is the map which the macro will be bound in. Multiple maps may be
+specified by separating multiple menu arguments by commas. Whitespace may not
+be used in between the menu arguments and the commas separating them.

 
 

-key and sequence are expanded by the same rules as the key bindings. There are
-some additions however. The first is that control characters in sequence can
-also be specified as ^x. In order to get a caret (`^'') you need to use ^^.
-Secondly, to specify a certain key such as up or to invoke a function directly,
-you can use the format <key name> and <function name>. For a listing of key
-names see the section on key bindings. Functions are listed in the reference.
+key and sequence are expanded by the same rules as the key bindings with some
+additions. The first is that control characters in sequence can also be
+specified as ^x. In order to get a caret (?^?) you need to use ^^. Secondly, to
+specify a certain key such as up or to invoke a function directly, you can use
+the format <key name> and <function name>. For a listing of key names see the
+section on key bindings. Functions are listed in the reference.

 
 The advantage with using function names directly is that the macros will work
 regardless of the current key bindings, so they are not dependent on the user
 
 The advantage with using function names directly is that the macros will work
 regardless of the current key bindings, so they are not dependent on the user


@@ -1884,149 +2276,160 @@ and also facilitates defining of macros in files used by more than one user
 (e.g., the system Muttrc).
 
 Optionally you can specify a descriptive text after sequence, which is shown in
 (e.g., the system Muttrc).
 
 Optionally you can specify a descriptive text after sequence, which is shown in

-the help screens.
+the help screens if they contain a description.
+
+Note

 
 

-Note: Macro definitions (if any) listed in the help screen(s), are silently
-truncated at the screen width, and are not wrapped.
+Macro definitions (if any) listed in the help screen(s), are silently truncated
+at the screen width, and are not wrapped.

 
 

-8. Using color and mono video attributes
+9. Using Color and Mono Video Attributes

 
 

+Usage:

 
 

-Usage: color object foreground background [ regexp ]
-Usage: color index foreground background pattern
-Usage: uncolor index pattern [ pattern ... ]
+color object foreground background
+color { header | body } foreground background regexp
+color index foreground background pattern
+uncolor { index | header | body } { * | pattern ... }

 
 If your terminal supports color, you can spice up Mutt by creating your own
 color scheme. To define the color of an object (type of information), you must
 specify both a foreground color and a background color (it is not possible to
 only specify one or the other).
 
 
 If your terminal supports color, you can spice up Mutt by creating your own
 color scheme. To define the color of an object (type of information), you must
 specify both a foreground color and a background color (it is not possible to
 only specify one or the other).
 

-object can be one of:
-
-  ● attachment
+header and body match regexp in the header/body of a message, index matches
+pattern (see Section 2, ?Patterns: Searching, Limiting and Tagging?) in the
+message index.

 
 

-  ● body (match regexp in the body of messages)
-
-  ● bold (hiliting bold patterns in the body of messages)
+object can be one of:

 
 

-  ● error (error messages printed by Mutt)
+  * attachment

 
 

-  ● header (match regexp in the message header)
+  * bold (hiliting bold patterns in the body of messages)

 
 

-  ● hdrdefault (default color of the message header in the pager)
+  * error (error messages printed by Mutt)

 
 

-  ● index (match pattern in the message index)
+  * hdrdefault (default color of the message header in the pager)

 
 

-  ● indicator (arrow or bar used to indicate the current item in a menu)
+  * indicator (arrow or bar used to indicate the current item in a menu)

 
 

-  ● markers (the ``+'' markers at the beginning of wrapped lines in the pager)
+  * markers (the ?+? markers at the beginning of wrapped lines in the pager)

 
 

-  ● message (informational messages)
+  * message (informational messages)

 
 

-  ● normal
+  * normal

 
 

-  ● quoted (text matching $quote_regexp in the body of a message)
+  * quoted (text matching $quote_regexp in the body of a message)

 
 

-  ● quoted1, quoted2, ..., quotedN (higher levels of quoting)
+  * quoted1, quoted2, ..., quotedN (higher levels of quoting)

 
 

-  ● search (hiliting of words in the pager)
+  * search (hiliting of words in the pager)

 
 

-  ● signature
+  * signature

 
 

-  ● status (mode lines used to display info about the mailbox or message)
+  * status (mode lines used to display info about the mailbox or message)

 
 

-  ● tilde (the ``~'' used to pad blank lines in the pager)
+  * tilde (the ??? used to pad blank lines in the pager)

 
 

-  ● tree (thread tree drawn in the message index and attachment menu)
+  * tree (thread tree drawn in the message index and attachment menu)

 
 

-  ● underline (hiliting underlined patterns in the body of messages)
+  * underline (hiliting underlined patterns in the body of messages)

 
 foreground and background can be one of the following:
 
 
 foreground and background can be one of the following:
 

-  ● white
+  * white

 
 

-  ● black
+  * black

 
 

-  ● green
+  * green

 
 

-  ● magenta
+  * magenta

 
 

-  ● blue
+  * blue

 
 

-  ● cyan
+  * cyan

 
 

-  ● yellow
+  * yellow

 
 

-  ● red
+  * red

 
 

-  ● default
+  * default

 
 

-  ● colorx
+  * colorx

 
 foreground can optionally be prefixed with the keyword bright to make the
 foreground color boldfaced (e.g., brightred).
 
 If your terminal supports it, the special keyword default can be used as a
 transparent color. The value brightdefault is also valid. If Mutt is linked
 
 foreground can optionally be prefixed with the keyword bright to make the
 foreground color boldfaced (e.g., brightred).
 
 If your terminal supports it, the special keyword default can be used as a
 transparent color. The value brightdefault is also valid. If Mutt is linked

-against the S-Lang library, you also need to set the COLORFGBG environment
+against the S-Lang library, you also need to set the $COLORFGBG environment

 variable to the default colors of your terminal for this to work; for example
 (for Bourne-like shells):
 
 set COLORFGBG="green;black"
 export COLORFGBG
 
 variable to the default colors of your terminal for this to work; for example
 (for Bourne-like shells):
 
 set COLORFGBG="green;black"
 export COLORFGBG
 

-Note: The S-Lang library requires you to use the lightgray and brown keywords
-instead of white and yellow when setting this variable.
+Note
+
+The S-Lang library requires you to use the lightgray and brown keywords instead
+of white and yellow when setting this variable.
+
+Note

 
 

-Note: The uncolor command can be applied to the index object only. It removes
-entries from the list. You must specify the same pattern specified in the color
-command for it to be removed. The pattern ``*'' is a special token which means
-to clear the color index list of all entries.
+The uncolor command can be applied to the index, header and body objects only.
+It removes entries from the list. You must specify the same pattern specified
+in the color command for it to be removed. The pattern ?*? is a special token
+which means to clear the color list of all entries.

 
 

-Mutt also recognizes the keywords color0, color1, ..., colorN-1 (N being the
+Mutt also recognizes the keywords color0, color1, ?, colorN-1 (N being the

 number of colors supported by your terminal). This is useful when you remap the
 colors for your display (for example by changing the color associated with
 color2 for your xterm), since color names may then lose their normal meaning.
 
 If your terminal does not support color, it is still possible change the video
 number of colors supported by your terminal). This is useful when you remap the
 colors for your display (for example by changing the color associated with
 color2 for your xterm), since color names may then lose their normal meaning.
 
 If your terminal does not support color, it is still possible change the video

-attributes through the use of the ``mono'' command:
+attributes through the use of the ?mono? command. Usage:

 
 

+mono object attribute
+mono { header | body } attribute regexp
+mono index attribute pattern
+unmono { index | header | body } { * | pattern ... }

 
 

-Usage: mono <object> <attribute> [ regexp ]
-Usage: mono index attribute pattern
-Usage: unmono index pattern [ pattern ... ]
+For object, see the color command. attribute can be one of the following:

 
 

-where attribute is one of the following:
+  * none

 
 

-  ● none
+  * bold

 
 

-  ● bold
+  * underline

 
 

-  ● underline
+  * reverse

 
 

-  ● reverse
+  * standout

 
 

-  ● standout
+10. Message Header Display

 
 

-9. Ignoring (weeding) unwanted message headers
+10.1. Selecting Headers

 
 

-Usage: [un]ignorepattern [ pattern ... ]
+Usage:
+
+ignore pattern [ pattern ...]
+unignore { * | pattern ... }

 
 Messages often have many header fields added by automatic processing systems,
 or which may not seem useful to display on the screen. This command allows you
 
 Messages often have many header fields added by automatic processing systems,
 or which may not seem useful to display on the screen. This command allows you

-to specify header fields which you don't normally want to see.
+to specify header fields which you don't normally want to see in the pager.

 
 

-You do not need to specify the full header field name. For example, ``ignore
-content-'' will ignore all header fields that begin with the pattern
-``content-''. ``ignore *'' will ignore all headers.
+You do not need to specify the full header field name. For example, ?ignore
+content-? will ignore all header fields that begin with the pattern ?content-?.
+?ignore *? will ignore all headers.

 
 

-To remove a previously added token from the list, use the ``unignore'' command.
-The ``unignore'' command will make Mutt display headers with the given pattern.
-For example, if you do ``ignore x-'' it is possible to ``unignore x-mailer''.
+To remove a previously added token from the list, use the ?unignore? command.
+The ?unignore? command will make Mutt display headers with the given pattern.
+For example, if you do ?ignore x-? it is possible to ?unignore x-mailer?.

 
 

-``unignore *'' will remove all tokens from the ignore list.
+?unignore *? will remove all tokens from the ignore list.

 
 

-For example:
+Example 3.9. Header weeding

 
 # Sven's draconian header weeding
 ignore *
 
 # Sven's draconian header weeding
 ignore *


@@ -2034,19 +2437,41 @@ unignore from date subject to cc
 unignore organization organisation x-mailer: x-newsreader: x-mailing-list:
 unignore posted-to:
 
 unignore organization organisation x-mailer: x-newsreader: x-mailing-list:
 unignore posted-to:
 

-10. Alternative addresses

 
 

-Usage: [un]alternates [ -groupname [ ... ] ] regexp [ regexp ... ]
+10.2. Ordering Displayed Headers
+
+Usage:
+
+hdr_order header [ header ...]
+unhdr_order { * | header ... }
+
+With the hdr_order command you can specify an order in which Mutt will attempt
+to present these headers to you when viewing messages.
+
+?unhdr_order *? will clear all previous headers from the order list, thus
+removing the header order effects set by the system-wide startup file.
+
+Example 3.10. Configuring header display order
+
+hdr_order From Date: From: To: Cc: Subject:
+
+
+11. Alternative Addresses
+
+Usage:

 
 

-With various functions, mutt will treat messages differently, depending on
+alternates [ -group name ...] regexp [ regexp ...]
+unalternates [ -group name ...] { * | regexp ... }
+
+With various functions, Mutt will treat messages differently, depending on

 whether you sent them or whether you received them from someone else. For
 whether you sent them or whether you received them from someone else. For

-instance, when replying to a message that you sent to a different party, mutt
+instance, when replying to a message that you sent to a different party, Mutt

 will automatically suggest to send the response to the original message's
 will automatically suggest to send the response to the original message's

-recipients -- responding to yourself won't make much sense in many cases. (See
+recipients ? responding to yourself won't make much sense in many cases. (See

 $reply_to.)
 
 Many users receive e-mail under a number of different addresses. To fully use
 $reply_to.)
 
 Many users receive e-mail under a number of different addresses. To fully use

-mutt's features here, the program must be able to recognize what e-mail
+Mutt's features here, the program must be able to recognize what e-mail

 addresses you receive mail under. That's the purpose of the alternates command:
 It takes a list of regular expressions, each of which can identify an address
 under which you receive e-mail.
 addresses you receive mail under. That's the purpose of the alternates command:
 It takes a list of regular expressions, each of which can identify an address
 under which you receive e-mail.


@@ -2057,8 +2482,8 @@ possible to avoid mismatches. For example, if you specify:
 
 alternates user@example
 
 
 alternates user@example
 

-mutt will consider ``some-user@example'' as being your address, too which may
-not be desired. As a solution, in such cases addresses should be specified as:
+Mutt will consider ?some-user@example? as being your address, too which may not
+be desired. As a solution, in such cases addresses should be specified as:

 
 alternates '^user@example$'
 
 
 alternates '^user@example$'
 


@@ -2073,155 +2498,173 @@ under an unalternates command.
 To remove a regular expression from the alternates list, use the unalternates
 command with exactly the same regexp. Likewise, if the regexp for an alternates
 command matches an entry on the unalternates list, that unalternates entry will
 To remove a regular expression from the alternates list, use the unalternates
 command with exactly the same regexp. Likewise, if the regexp for an alternates
 command matches an entry on the unalternates list, that unalternates entry will

-be removed. If the regexp for unalternates is ``*'', all entries on alternates
+be removed. If the regexp for unalternates is ?*?, all entries on alternates

 will be removed.
 
 will be removed.
 

-11. Mailing lists
+12. Mailing Lists

 
 

+Usage:

 
 

-Usage: [un]lists [ -group name [ ... ] ] regexp [ regexp ... ]
-Usage: [un]subscribe [ -group name [ ... ] ] regexp [ regexp ... ]
+lists [ -group name ...] regexp [ regexp ...]
+unlists [ -group name ...] { * | regexp ... }
+subscribe [ -group name ...] regexp [ regexp ...]
+unsubscribe [ -group name ...] { * | regexp ... }

 
 Mutt has a few nice features for handling mailing lists. In order to take
 advantage of them, you must specify which addresses belong to mailing lists,
 
 Mutt has a few nice features for handling mailing lists. In order to take
 advantage of them, you must specify which addresses belong to mailing lists,

-and which mailing lists you are subscribed to. Once you have done this, the
-list-reply function will work for all known lists. Additionally, when you send
-a message to a subscribed list, mutt will add a Mail-Followup-To header to tell
-other users' mail user agents not to send copies of replies to your personal
-address. Note that the Mail-Followup-To header is a non-standard extension
-which is not supported by all mail user agents. Adding it is not bullet-proof
-against receiving personal CCs of list messages. Also note that the generation
-of the Mail-Followup-To header is controlled by the $followup_to configuration
-variable.
+and which mailing lists you are subscribed to. Mutt also has limited support
+for auto-detecting mailing lists: it supports parsing mailto: links in the
+common List-Post: header which has the same effect as specifying the list
+address via the lists command (except the group feature). Once you have done
+this, the <list-reply> function will work for all known lists. Additionally,
+when you send a message to a subscribed list, Mutt will add a Mail-Followup-To
+header to tell other users' mail user agents not to send copies of replies to
+your personal address.
+
+Note
+
+The Mail-Followup-To header is a non-standard extension which is not supported
+by all mail user agents. Adding it is not bullet-proof against receiving
+personal CCs of list messages. Also note that the generation of the
+Mail-Followup-To header is controlled by the $followup_to configuration
+variable since it's common practice on some mailing lists to send Cc upons
+replies (which is more a group- than a list-reply).

 
 More precisely, Mutt maintains lists of patterns for the addresses of known and
 subscribed mailing lists. Every subscribed mailing list is known. To mark a
 
 More precisely, Mutt maintains lists of patterns for the addresses of known and
 subscribed mailing lists. Every subscribed mailing list is known. To mark a

-mailing list as known, use the ``lists'' command. To mark it as subscribed, use
-``subscribe''.
+mailing list as known, use the list command. To mark it as subscribed, use
+subscribe.

 
 You can use regular expressions with both commands. To mark all messages sent
 
 You can use regular expressions with both commands. To mark all messages sent

-to a specific bug report's address on mutt's bug tracking system as list mail,
-for instance, you could say ``subscribe [0-9]*@bugs.guug.de''. Often, it's
-sufficient to just give a portion of the list's e-mail address.
+to a specific bug report's address on Debian's bug tracking system as list
+mail, for instance, you could say
+
+subscribe [0-9]*.*@bugs.debian.org
+
+as it's often, it's sufficient to just give a portion of the list's e-mail
+address.

 
 Specify as much of the address as you need to to remove ambiguity. For example,
 if you've subscribed to the Mutt mailing list, you will receive mail addressed
 to mutt-users@mutt.org. So, to tell Mutt that this is a mailing list, you could
 
 Specify as much of the address as you need to to remove ambiguity. For example,
 if you've subscribed to the Mutt mailing list, you will receive mail addressed
 to mutt-users@mutt.org. So, to tell Mutt that this is a mailing list, you could

-add ``lists mutt-users@'' to your initialization file. To tell mutt that you
-are subscribed to it, add ``subscribe mutt-users'' to your initialization file
-instead. If you also happen to get mail from someone whose address is
-mutt-users@example.com, you could use ``lists ^mutt-users@mutt\\.org$'' or
-``subscribe ^mutt-users@mutt\\.org$'' to match only mail from the actual list.
+add lists mutt-users@ to your initialization file. To tell Mutt that you are
+subscribed to it, add subscribe mutt-users to your initialization file instead.
+If you also happen to get mail from someone whose address is
+mutt-users@example.com, you could use lists ^mutt-users@mutt\\.org$ or
+subscribe ^mutt-users@mutt\\.org$ to match only mail from the actual list.

 
 The -group flag adds all of the subsequent regular expressions to the named
 group.
 
 
 The -group flag adds all of the subsequent regular expressions to the named
 group.
 

-The ``unlists'' command is used to remove a token from the list of known and
-subscribed mailing-lists. Use ``unlists *'' to remove all tokens.
+The ?unlists? command is used to remove a token from the list of known and
+subscribed mailing-lists. Use ?unlists *? to remove all tokens.

 
 To remove a mailing list from the list of subscribed mailing lists, but keep it
 
 To remove a mailing list from the list of subscribed mailing lists, but keep it

-on the list of known mailing lists, use ``unsubscribe''.
+on the list of known mailing lists, use unsubscribe.

 
 

-12. Using Multiple spool mailboxes
+13. Using Multiple Spool Mailboxes

 
 

-Usage: mbox-hook [!]patternmailbox
+Usage:
+
+mbox-hook [!]pattern mailbox

 
 This command is used to move read messages from a specified mailbox to a
 different mailbox automatically when you quit or change folders. pattern is a
 
 This command is used to move read messages from a specified mailbox to a
 different mailbox automatically when you quit or change folders. pattern is a

-regular expression specifying the mailbox to treat as a ``spool'' mailbox and
+regular expression specifying the mailbox to treat as a ?spool? mailbox and

 mailbox specifies where mail should be saved when read.
 
 Unlike some of the other hook commands, only the first matching pattern is used
 (it is not possible to save read mail in more than a single mailbox).
 
 mailbox specifies where mail should be saved when read.
 
 Unlike some of the other hook commands, only the first matching pattern is used
 (it is not possible to save read mail in more than a single mailbox).
 

-13. Monitoring incoming mail
+14. Monitoring Incoming Mail
+
+Usage:

 
 

-Usage: [un]mailboxesfolder [ folder ... ]
+mailboxes mailbox [ mailbox ...]
+unmailboxes { * | mailbox ... }

 
 This command specifies folders which can receive mail and which will be checked
 
 This command specifies folders which can receive mail and which will be checked

-for new messages. By default, the main menu status bar displays how many of
-these folders have new messages.
+for new messages periodically.

 
 folder can either be a local file or directory (Mbox/Mmdf or Maildir/Mh). If
 Mutt was built with POP and/or IMAP support, folder can also be a POP/IMAP
 
 folder can either be a local file or directory (Mbox/Mmdf or Maildir/Mh). If
 Mutt was built with POP and/or IMAP support, folder can also be a POP/IMAP

-folder URL. The URL syntax is described in Section 1.2, "URL syntax", POP and
-IMAP are described in Section 3, "POP3 Support" and Section 4, "IMAP Support"
+folder URL. The URL syntax is described in Section 1.2, ?URL Syntax?, POP and
+IMAP are described in Section 3, ?POP3 Support? and Section 4, ?IMAP Support?

 respectively.
 
 respectively.
 

-When changing folders, pressing space will cycle through folders with new mail.
+Mutt provides a number of advanced features for handling (possibly many)
+folders and new mail within them, please refer to Section 9, ?Handling multiple
+folders? for details (including in what situations and how often Mutt checks
+for new mail).

 
 

-Pressing TAB in the directory browser will bring up a menu showing the files
-specified by the mailboxes command, and indicate which contain new messages.
-Mutt will automatically enter this mode when invoked from the command line with
-the -y option.
+The ?unmailboxes? command is used to remove a token from the list of folders
+which receive mail. Use ?unmailboxes *? to remove all tokens.

 
 

-The ``unmailboxes'' command is used to remove a token from the list of folders
-which receive mail. Use ``unmailboxes *'' to remove all tokens.
+Note

 
 

-Note: the folders in the mailboxes command are resolved when the command is
-executed, so if these names contain shortcut characters (such as ``='' and ``!
-''), any variable definition that affect these characters (like $folder and
-$spoolfile) should be executed before the mailboxes command. If none of these
-shorcuts are used, a local path should be absolute as otherwise mutt tries to
-find it within the current working directory from where mutt was started which
-may not always be desired.
+The folders in the mailboxes command are resolved when the command is executed,
+so if these names contain shortcut characters (such as ?=? and ?!?), any
+variable definition that affects these characters (like $folder and $spoolfile)
+should be set before the mailboxes command. If none of these shorcuts are used,
+a local path should be absolute as otherwise Mutt tries to find it relative to
+the directory from where Mutt was started which may not always be desired.

 
 

-For local folders, new mail is detected by comparing access and/or modification
-times of files and folders. The interval in which Mutt checks for new mail is
-defined by $mail_check.
+For Mbox and Mmdf folders, new mail is detected by comparing access and/or
+modification times of files: Mutt assumes a folder has new mail if it wasn't
+accessed after it was last modified. Utilities like biff or frm or any other
+program which accesses the mailbox might cause Mutt to never detect new mail
+for that mailbox if they do not properly reset the access time. Other possible
+causes of Mutt not detecting new mail in these folders are backup tools
+(updating access times) or filesystems mounted without access time update
+support.

 
 

-Special care is required with Mbox and Mmdf folders as Mutt assumes such a
-folder has new mail if it wasn't accessed after it was last modified. Utilities
-like biff or frm or any other program which accesses the mailbox might cause
-Mutt to never detect new mail for that mailbox if they do not properly reset
-the access time. Backup tools are another common reason for updated access
-times.
+In cases where new mail detection for Mbox or Mmdf folders appears to be
+unreliable, the $check_mbox_size option can be used to make Mutt track and
+consult file sizes for new mail detection instead which won't work for
+size-neutral changes.

 
 

-14. User defined headers
+15. User-Defined Headers

 
 

-Usage: my_hdrstringunmy_hdrfield [ field ... ]
+Usage:

 
 

-The ``my_hdr'' command allows you to create your own header fields which will
-be added to every message you send.
+my_hdr string
+unmy_hdr { * | field ... }

 
 

-For example, if you would like to add an ``Organization:'' header field to all
-of your outgoing messages, you can put the command
+The my_hdr command allows you to create your own header fields which will be
+added to every message you send and appear in the editor if $edit_headers is
+set.

 
 

-"my_hdr Organization: A Really Big Company, Anytown, USA"
+For example, if you would like to add an ?Organization:? header field to all of
+your outgoing messages, you can put the command something like shown in
+Example 3.11, ?Defining custom headers? in your .muttrc.

 
 

-in your .muttrc.
+Example 3.11. Defining custom headers

 
 

-Note: space characters are not allowed between the keyword and the colon
-(``:''). The standard for electronic mail (RFC822) says that space is illegal
-there, so Mutt enforces the rule.
-
-If you would like to add a header field to a single message, you should either
-set the $edit_headers variable, or use the edit-headers function (default:
-``E'') in the send-menu so that you can edit the header of your message along
-with the body.
+my_hdr Organization: A Really Big Company, Anytown, USA

 
 

-To remove user defined header fields, use the ``unmy_hdr'' command. You may
-specify an asterisk (``*'') to remove all header fields, or the fields to
-remove. For example, to remove all ``To'' and ``Cc'' header fields, you could
-use:

 
 

-"unmy_hdr to cc"
+Note

 
 

-15. Defining the order of headers when viewing messages
+Space characters are not allowed between the keyword and the colon (?:?). The
+standard for electronic mail (RFC2822) says that space is illegal there, so
+Mutt enforces the rule.

 
 

-Usage: hdr_orderheader1header2header3
+If you would like to add a header field to a single message, you should either
+set the $edit_headers variable, or use the <edit-headers> function (default:
+?E?) in the compose menu so that you can edit the header of your message along
+with the body.

 
 

-With this command, you can specify an order in which mutt will attempt to
-present headers to you when viewing messages.
+To remove user defined header fields, use the unmy_hdr command. You may specify
+an asterisk (?*?) to remove all header fields, or the fields to remove. For
+example, to remove all ?To? and ?Cc? header fields, you could use:

 
 

-``unhdr_order *'' will clear all previous headers from the order list, thus
-removing the header order effects set by the system-wide startup file.
+unmy_hdr to cc

 
 

-hdr_order From Date: From: To: Cc: Subject:
+16. Specify Default Save Mailbox

 
 

-16. Specify default save mailbox
+Usage:

 
 

-Usage: save-hook [!]patternmailbox
+save-hook [!]pattern mailbox

 
 This command is used to override the default mailbox used when saving messages.
 mailbox will be used as the default if the message matches pattern, see Message
 
 This command is used to override the default mailbox used when saving messages.
 mailbox will be used as the default if the message matches pattern, see Message


@@ -2230,20 +2673,25 @@ Matching in Hooks for information on the exact format.
 To provide more flexibility and good defaults, Mutt applies the expandos of
 $index_format to mailbox after it was expanded.
 
 To provide more flexibility and good defaults, Mutt applies the expandos of
 $index_format to mailbox after it was expanded.
 

-Examples:
+Example 3.12. Using %-expandos in save-hook

 
 # default: save all to ~/Mail/<author name>
 save-hook . ~/Mail/%F
 
 # default: save all to ~/Mail/<author name>
 save-hook . ~/Mail/%F

-# save from me@turing.cs.hmc.edu/me@cs.hmc.edu to $folder/elinks
+
+# save from me@turing.cs.hmc.edu and me@cs.hmc.edu to $folder/elkins

 save-hook me@(turing\\.)?cs\\.hmc\\.edu$ +elkins
 save-hook me@(turing\\.)?cs\\.hmc\\.edu$ +elkins

+

 # save from aol.com to $folder/spam
 save-hook aol\\.com$ +spam
 
 # save from aol.com to $folder/spam
 save-hook aol\\.com$ +spam
 

+

 Also see the fcc-save-hook command.
 
 Also see the fcc-save-hook command.
 

-17. Specify default Fcc: mailbox when composing
+17. Specify Default Fcc: Mailbox When Composing

 
 

-Usage: fcc-hook [!]patternmailbox
+Usage:
+
+fcc-hook [!]pattern mailbox

 
 This command is used to save outgoing mail in a mailbox other than $record.
 Mutt searches the initial list of message recipients for the first matching
 
 This command is used to save outgoing mail in a mailbox other than $record.
 Mutt searches the initial list of message recipients for the first matching


@@ -2255,35 +2703,42 @@ $index_format to mailbox after it was expanded.
 
 See Message Matching in Hooks for information on the exact format of pattern.
 
 
 See Message Matching in Hooks for information on the exact format of pattern.
 

-Example: fcc-hook [@.]aol\\.com$ +spammers
+fcc-hook [@.]aol\\.com$ +spammers

 
 

-The above will save a copy of all messages going to the aol.com domain to the
+...will save a copy of all messages going to the aol.com domain to the

 `+spammers' mailbox by default. Also see the fcc-save-hook command.
 
 `+spammers' mailbox by default. Also see the fcc-save-hook command.
 

-18. Specify default save filename and default Fcc: mailbox at once
+18. Specify Default Save Filename and Default Fcc: Mailbox at Once
+
+Usage:

 
 

-Usage: fcc-save-hook [!]patternmailbox
+fcc-save-hook [!]pattern mailbox

 
 This command is a shortcut, equivalent to doing both a fcc-hook and a save-hook
 with its arguments, including %-expansion on mailbox according to $index_format
 .
 
 
 This command is a shortcut, equivalent to doing both a fcc-hook and a save-hook
 with its arguments, including %-expansion on mailbox according to $index_format
 .
 

-19. Change settings based upon message recipients
+19. Change Settings Based Upon Message Recipients

 
 

+Usage:

 
 

-Usage: reply-hook [!]pattern command
-Usage: send-hook [!]pattern command
-Usage: send2-hook [!]pattern command
+reply-hook [!]pattern command
+send-hook [!]pattern command
+send2-hook [!]pattern command

 
 These commands can be used to execute arbitrary configuration commands based
 
 These commands can be used to execute arbitrary configuration commands based

-upon recipients of the message. pattern is a regular expression matching the
-desired address. command is executed when regexp matches recipients of the
-message.
+upon recipients of the message. pattern is used to match the message, see
+Message Matching in Hooks for details. command is executed when pattern
+matches.

 
 

-reply-hook is matched against the message you are replyingto, instead of the
+reply-hook is matched against the message you are replying to, instead of the

 message you are sending. send-hook is matched against all messages, both new
 message you are sending. send-hook is matched against all messages, both new

-and replies. Note:reply-hooks are matched before the send-hook, regardless of
-the order specified in the user's configuration file.
+and replies.
+
+Note
+
+reply-hooks are matched before the send-hook, regardless of the order specified
+in the user's configuration file.

 
 send2-hook is matched every time a message is changed, either by editing it, or
 by using the compose menu to change its recipients or subject. send2-hook is
 
 send2-hook is matched every time a message is changed, either by editing it, or
 by using the compose menu to change its recipients or subject. send2-hook is


@@ -2291,32 +2746,35 @@ executed after send-hook, and can, e.g., be used to set parameters such as the
 $sendmail variable depending on the message's sender address.
 
 For each type of send-hook or reply-hook, when multiple matches occur, commands
 $sendmail variable depending on the message's sender address.
 
 For each type of send-hook or reply-hook, when multiple matches occur, commands

-are executed in the order they are specified in the muttrc (for that type of
+are executed in the order they are specified in the .muttrc (for that type of

 hook).
 
 hook).
 

-See Message Matching in Hooks for information on the exact format of pattern.
-

 Example: send-hook mutt "set mime_forward signature=''"
 
 Another typical use for this command is to change the values of the
 $attribution, $signature and $locale variables in order to change the language
 of the attributions and signatures based upon the recipients.
 
 Example: send-hook mutt "set mime_forward signature=''"
 
 Another typical use for this command is to change the values of the
 $attribution, $signature and $locale variables in order to change the language
 of the attributions and signatures based upon the recipients.
 

-Note: the send-hook's are only executed ONCE after getting the initial list of
-recipients. Adding a recipient after replying or editing the message will NOT
-cause any send-hook to be executed. Also note that my_hdr commands which modify
-recipient headers, or the message's subject, don't have any effect on the
-current message when executed from a send-hook.
+Note
+
+send-hook's are only executed once after getting the initial list of
+recipients. Adding a recipient after replying or editing the message will not
+cause any send-hook to be executed, similarily if $autoedit is set (as then the
+initial list of recipients is empty). Also note that my_hdr commands which
+modify recipient headers, or the message's subject, don't have any effect on
+the current message when executed from a send-hook.

 
 

-20. Change settings before formatting a message
+20. Change Settings Before Formatting a Message

 
 

-Usage: message-hook [!]patterncommand
+Usage:
+
+message-hook [!]pattern command

 
 This command can be used to execute arbitrary configuration commands before
 viewing or formatting a message based upon information about the message.
 command is executed if the pattern matches the message to be displayed. When
 multiple matches occur, commands are executed in the order they are specified
 
 This command can be used to execute arbitrary configuration commands before
 viewing or formatting a message based upon information about the message.
 command is executed if the pattern matches the message to be displayed. When
 multiple matches occur, commands are executed in the order they are specified

-in the muttrc.
+in the .muttrc.

 
 See Message Matching in Hooks for information on the exact format of pattern.
 
 
 See Message Matching in Hooks for information on the exact format of pattern.
 


@@ -2325,64 +2783,75 @@ Example:
 message-hook ~A 'set pager=builtin'
 message-hook '~f freshmeat-news' 'set pager="less \"+/^  subject: .*\""'
 
 message-hook ~A 'set pager=builtin'
 message-hook '~f freshmeat-news' 'set pager="less \"+/^  subject: .*\""'
 

-21. Choosing the cryptographic key of the recipient
+21. Choosing the Cryptographic Key of the Recipient
+
+Usage:

 
 

-Usage: crypt-hookpatternkeyid
+crypt-hook pattern keyid

 
 

-When encrypting messages with PGP or OpenSSL, you may want to associate a
+When encrypting messages with PGP/GnuPG or OpenSSL, you may want to associate a

 certain key with a given e-mail address automatically, either because the
 recipient's public key can't be deduced from the destination address, or
 because, for some reasons, you need to override the key Mutt would normally
 use. The crypt-hook command provides a method by which you can specify the ID
 of the public key to be used when encrypting messages to a certain recipient.
 
 certain key with a given e-mail address automatically, either because the
 recipient's public key can't be deduced from the destination address, or
 because, for some reasons, you need to override the key Mutt would normally
 use. The crypt-hook command provides a method by which you can specify the ID
 of the public key to be used when encrypting messages to a certain recipient.
 

-The meaning of "key id" is to be taken broadly in this context: You can either
-put a numerical key ID here, an e-mail address, or even just a real name.
+The meaning of keyid is to be taken broadly in this context: You can either put
+a numerical key ID here, an e-mail address, or even just a real name.

 
 

-22. Adding key sequences to the keyboard buffer
+22. Adding Key Sequences to the Keyboard Buffer

 
 

-Usage: pushstring
+Usage:
+
+push string

 
 This command adds the named string to the keyboard buffer. The string may
 contain control characters, key names and function names like the sequence
 string in the macro command. You may use it to automatically run a sequence of
 
 This command adds the named string to the keyboard buffer. The string may
 contain control characters, key names and function names like the sequence
 string in the macro command. You may use it to automatically run a sequence of

-commands at startup, or when entering certain folders. For example, the
-following command will automatically collapse all threads when entering a
-folder:
+commands at startup, or when entering certain folders. For example,
+Example 3.13, ?Embedding push in folder-hook? shows how to automatically
+collapse all threads when entering a folder.
+
+Example 3.13. Embedding push in folder-hook

 
 folder-hook . 'push <collapse-all>'
 
 
 folder-hook . 'push <collapse-all>'
 

-23. Executing functions

 
 

-Usage: execfunction [ function ... ]
+23. Executing Functions
+
+Usage:
+
+exec function [ function ...]

 
 This command can be used to execute any function. Functions are listed in the
 
 This command can be used to execute any function. Functions are listed in the

-function reference. ``exec function'' is equivalent to ``push <function>''.
+function reference. ?execfunction? is equivalent to ?push <function>?.

 
 24. Message Scoring
 
 
 24. Message Scoring
 

+Usage:

 
 

-Usage: score pattern value
-Usage: unscore pattern [ pattern ... ]
+score pattern value
+unscore { * | pattern ... }

 
 The score commands adds value to a message's score if pattern matches it.
 pattern is a string in the format described in the patterns section (note: For
 efficiency reasons, patterns which scan information not available in the index,
 
 The score commands adds value to a message's score if pattern matches it.
 pattern is a string in the format described in the patterns section (note: For
 efficiency reasons, patterns which scan information not available in the index,

-such as ~b, ~B or ~h, may not be used). value is a positive or negative
+such as ?b, ?B or ?h, may not be used). value is a positive or negative

 integer. A message's final score is the sum total of all matching score
 integer. A message's final score is the sum total of all matching score

-entries. However, you may optionally prefix value with an equal sign (=) to
+entries. However, you may optionally prefix value with an equal sign (?=?) to

 cause evaluation to stop at a particular entry if there is a match. Negative
 final scores are rounded up to 0.
 
 The unscore command removes score entries from the list. You must specify the
 same pattern specified in the score command for it to be removed. The pattern
 cause evaluation to stop at a particular entry if there is a match. Negative
 final scores are rounded up to 0.
 
 The unscore command removes score entries from the list. You must specify the
 same pattern specified in the score command for it to be removed. The pattern

-``*'' is a special token which means to clear the list of all score entries.
+?*? is a special token which means to clear the list of all score entries.

 
 

-25. Spam detection
+25. Spam Detection

 
 

+Usage:

 
 

-Usage: spam pattern format
-Usage: nospam pattern
+spam pattern format
+nospam { * | pattern }

 
 Mutt has generalized support for external spam-scoring filters. By defining
 your spam patterns with the spam and nospam commands, you can limit, search,
 
 Mutt has generalized support for external spam-scoring filters. By defining
 your spam patterns with the spam and nospam commands, you can limit, search,


@@ -2394,56 +2863,64 @@ spam tags only when they are defined for a given message.)
 Your first step is to define your external filter's spam patterns using the
 spam command. pattern should be a regular expression that matches a header in a
 mail message. If any message in the mailbox matches this regular expression, it
 Your first step is to define your external filter's spam patterns using the
 spam command. pattern should be a regular expression that matches a header in a
 mail message. If any message in the mailbox matches this regular expression, it

-will receive a ``spam tag'' or ``spam attribute'' (unless it also matches a
-nospam pattern -- see below.) The appearance of this attribute is entirely up
-to you, and is governed by the format parameter. format can be any static text,
-but it also can include back-references from the pattern expression. (A regular
-expression ``back-reference'' refers to a sub-expression contained within
+will receive a ?spam tag? or ?spam attribute? (unless it also matches a nospam
+pattern ? see below.) The appearance of this attribute is entirely up to you,
+and is governed by the format parameter. format can be any static text, but it
+also can include back-references from the pattern expression. (A regular
+expression ?back-reference? refers to a sub-expression contained within

 parentheses.) %1 is replaced with the first back-reference in the regex, %2
 with the second, etc.
 
 parentheses.) %1 is replaced with the first back-reference in the regex, %2
 with the second, etc.
 

+To match spam tags, mutt needs the corresponding header information which is
+always the case for local and POP folders but not for IMAP in the default
+configuration. Depending on the spam header to be analyzed, $imap_headers may
+need to be adjusted.
+

 If you're using multiple spam filters, a message can have more than one
 spam-related header. You can define spam patterns for each filter you use. If a
 message matches two or more of these patterns, and the $spam_separator variable
 is set to a string, then the message's spam tag will consist of all the format
 strings joined together, with the value of $spam_separator separating them.
 
 If you're using multiple spam filters, a message can have more than one
 spam-related header. You can define spam patterns for each filter you use. If a
 message matches two or more of these patterns, and the $spam_separator variable
 is set to a string, then the message's spam tag will consist of all the format
 strings joined together, with the value of $spam_separator separating them.
 

-For example, suppose I use DCC, SpamAssassin, and PureMessage. I might define
-these spam settings:
+For example, suppose one uses DCC, SpamAssassin, and PureMessage, then the
+configuration might look like in Example 3.14, ?Configuring spam detection?.
+
+Example 3.14. Configuring spam detection

 
 spam "X-DCC-.*-Metrics:.*(....)=many"         "90+/DCC-%1"
 spam "X-Spam-Status: Yes"                     "90+/SA"
 spam "X-PerlMX-Spam: .*Probability=([0-9]+)%" "%1/PM"
 set spam_separator=", "
 
 
 spam "X-DCC-.*-Metrics:.*(....)=many"         "90+/DCC-%1"
 spam "X-Spam-Status: Yes"                     "90+/SA"
 spam "X-PerlMX-Spam: .*Probability=([0-9]+)%" "%1/PM"
 set spam_separator=", "
 

-If I then received a message that DCC registered with ``many'' hits under the
-``Fuz2'' checksum, and that PureMessage registered with a 97% probability of
+
+If then a message is received that DCC registered with ?many? hits under the
+?Fuz2? checksum, and that PureMessage registered with a 97% probability of

 being spam, that message's spam tag would read 90+/DCC-Fuz2, 97/PM. (The four
 being spam, that message's spam tag would read 90+/DCC-Fuz2, 97/PM. (The four

-characters before ``=many'' in a DCC report indicate the checksum used -- in
-this case, ``Fuz2''.)
+characters before ?=many? in a DCC report indicate the checksum used ? in this
+case, ?Fuz2?.)

 
 If the $spam_separator variable is unset, then each spam pattern match
 supersedes the previous one. Instead of getting joined format strings, you'll
 get only the last one to match.
 
 The spam tag is what will be displayed in the index when you use %H in the
 
 If the $spam_separator variable is unset, then each spam pattern match
 supersedes the previous one. Instead of getting joined format strings, you'll
 get only the last one to match.
 
 The spam tag is what will be displayed in the index when you use %H in the

-$index_format variable. It's also the string that the ~H pattern-matching
-expression matches against for search and limit functions. And it's what
+$index_format variable. It's also the string that the ?H pattern-matching
+expression matches against for <search> and <limit> functions. And it's what

 sorting by spam attribute will use as a sort key.
 
 That's a pretty complicated example, and most people's actual environments will
 have only one spam filter. The simpler your configuration, the more effective
 sorting by spam attribute will use as a sort key.
 
 That's a pretty complicated example, and most people's actual environments will
 have only one spam filter. The simpler your configuration, the more effective

-mutt can be, especially when it comes to sorting.
+Mutt can be, especially when it comes to sorting.

 
 

-Generally, when you sort by spam tag, mutt will sort lexically -- that is, by
+Generally, when you sort by spam tag, Mutt will sort lexically ? that is, by

 ordering strings alphanumerically. However, if a spam tag begins with a number,
 ordering strings alphanumerically. However, if a spam tag begins with a number,

-mutt will sort numerically first, and lexically only when two numbers are equal
+Mutt will sort numerically first, and lexically only when two numbers are equal

 in value. (This is like UNIX's sort -n.) A message with no spam attributes at
 in value. (This is like UNIX's sort -n.) A message with no spam attributes at

-all -- that is, one that didn't match any of your spam patterns -- is sorted at
+all ? that is, one that didn't match any of your spam patterns ? is sorted at

 lowest priority. Numbers are sorted next, beginning with 0 and ranging upward.
 lowest priority. Numbers are sorted next, beginning with 0 and ranging upward.

-Finally, non-numeric strings are sorted, with ``a'' taking lower priority than
-``z''. Clearly, in general, sorting by spam tags is most effective when you can
-coerce your filter to give you a raw number. But in case you can't, mutt can
+Finally, non-numeric strings are sorted, with ?a? taking lower priority than
+?z?. Clearly, in general, sorting by spam tags is most effective when you can
+coerce your filter to give you a raw number. But in case you can't, Mutt can

 still do something useful.
 
 The nospam command can be used to write exceptions to spam patterns. If a
 still do something useful.
 
 The nospam command can be used to write exceptions to spam patterns. If a


@@ -2455,45 +2932,95 @@ If the pattern given to nospam is exactly the same as the pattern on an
 existing spam list entry, the effect will be to remove the entry from the spam
 list, instead of adding an exception. Likewise, if the pattern for a spam
 command matches an entry on the nospam list, that nospam entry will be removed.
 existing spam list entry, the effect will be to remove the entry from the spam
 list, instead of adding an exception. Likewise, if the pattern for a spam
 command matches an entry on the nospam list, that nospam entry will be removed.

-If the pattern for nospam is ``*'', all entries on both lists will be removed.
+If the pattern for nospam is ?*?, all entries on both lists will be removed.

 This might be the default action if you use spam and nospam in conjunction with
 a folder-hook.
 
 You can have as many spam or nospam commands as you like. You can even do your
 This might be the default action if you use spam and nospam in conjunction with
 a folder-hook.
 
 You can have as many spam or nospam commands as you like. You can even do your

-own primitive spam detection within mutt -- for example, if you consider all
+own primitive spam detection within Mutt ? for example, if you consider all

 mail from MAILER-DAEMON to be spam, you can use a spam command like this:
 
 spam "^From: .*MAILER-DAEMON"       "999"
 
 26. Setting and Querying Variables
 
 mail from MAILER-DAEMON to be spam, you can use a spam command like this:
 
 spam "^From: .*MAILER-DAEMON"       "999"
 
 26. Setting and Querying Variables
 

-26.1. Commands
+26.1. Variable Types
+
+Mutt supports these types of configuration variables:
+
+boolean
+
+    A boolean expression, either ?yes? or ?no?.
+
+number
+
+    A signed integer number in the range -32768 to 32767.
+
+string
+
+    Arbitrary text.
+
+path
+
+    A specialized string for representing paths including support for mailbox
+    shortcuts (see Section 7, ?Mailbox Shortcuts?) as well as tilde (???) for a
+    user's home directory and more.
+
+quadoption
+
+    Like a boolean but triggers a prompt when set to ?ask-yes? or ?ask-no? with
+    ?yes? and ?no? preselected respectively.
+
+sort order
+
+    A specialized string allowing only particular words as values depending on
+    the variable.
+
+regular expression
+
+    A regular expression, see Section 1, ?Regular Expressions? for an
+    introduction.
+
+folder magic
+
+    Specifies the type of folder to use: mbox, mmdf, mh or maildir. Currently
+    only used to determine the type for newly created folders.
+
+e-mail address
+
+    An e-mail address either with or without realname. The older
+    ?user@example.org (Joe User)? form is supported but strongly deprecated.
+
+user-defined
+
+    Arbitrary text, see Section 26.3, ?User-Defined Variables? for details.
+
+26.2. Commands

 
 The following commands are available to manipulate and query variables:
 
 
 The following commands are available to manipulate and query variables:
 

+Usage:

 
 

-Usage: set [no|inv]variable[=value] [ variable ... ]
-Usage: toggle variable [variable ... ]
-Usage: unset variable [variable ... ]
-Usage: reset variable [variable ... ]
+set { [ no | inv ] variable | variable=value } [...]
+toggle variable [ variable ...]
+unset variable [ variable ...]
+reset variable [ variable ...]

 
 This command is used to set (and unset) configuration variables. There are four
 basic types of variables: boolean, number, string and quadoption. boolean
 variables can be set (true) or unset (false). number variables can be assigned
 
 This command is used to set (and unset) configuration variables. There are four
 basic types of variables: boolean, number, string and quadoption. boolean
 variables can be set (true) or unset (false). number variables can be assigned

-a positive integer value.
-
-string variables consist of any number of printable characters. strings must be
-enclosed in quotes if they contain spaces or tabs. You may also use the ``C''
-escape sequences \n and \t for newline and tab, respectively.
-
-quadoption variables are used to control whether or not to be prompted for
-certain actions, or to specify a default action. A value of yes will cause the
-action to be carried out automatically as if you had answered yes to the
-question. Similarly, a value of no will cause the action to be carried out as
-if you had answered ``no.'' A value of ask-yes will cause a prompt with a
-default answer of ``yes'' and ask-no will provide a default answer of ``no.''
-
-Prefixing a variable with ``no'' will unset it. Example: set noaskbcc.
+a positive integer value. string variables consist of any number of printable
+characters and must be enclosed in quotes if they contain spaces or tabs. You
+may also use the escape sequences ?\n? and ?\t? for newline and tab,
+respectively. quadoption variables are used to control whether or not to be
+prompted for certain actions, or to specify a default action. A value of yes
+will cause the action to be carried out automatically as if you had answered
+yes to the question. Similarly, a value of no will cause the action to be
+carried out as if you had answered ?no.? A value of ask-yes will cause a prompt
+with a default answer of ?yes? and ask-no will provide a default answer of
+?no.?
+
+Prefixing a variable with ?no? will unset it. Example: set noaskbcc.

 
 For boolean variables, you may optionally prefix the variable name with inv to
 toggle the value (on or off). This is useful when writing macros. Example: set
 
 For boolean variables, you may optionally prefix the variable name with inv to
 toggle the value (on or off). This is useful when writing macros. Example: set


@@ -2505,8 +3032,8 @@ variables.
 The unset command automatically prepends the no prefix to all specified
 variables.
 
 The unset command automatically prepends the no prefix to all specified
 variables.
 

-Using the enter-command function in the index menu, you can query the value of
-a variable by prefixing the name of the variable with a question mark:
+Using the <enter-command> function in the index menu, you can query the value
+of a variable by prefixing the name of the variable with a question mark:

 
 set ?allow_8bit
 
 
 set ?allow_8bit
 


@@ -2515,49 +3042,56 @@ variables.
 
 The reset command resets all given variables to the compile time defaults
 (hopefully mentioned in this manual). If you use the command set and prefix the
 
 The reset command resets all given variables to the compile time defaults
 (hopefully mentioned in this manual). If you use the command set and prefix the

-variable with ``&'' this has the same behavior as the reset command.
+variable with ?&? this has the same behavior as the reset command.

 
 

-With the reset command there exists the special variable ``all'', which allows
+With the reset command there exists the special variable ?all?, which allows

 you to reset all variables to their system defaults.
 
 you to reset all variables to their system defaults.
 

-26.2. User-defined variables
+26.3. User-Defined Variables

 
 

-26.2.1. Introduction
+26.3.1. Introduction

 
 

-Along with the variables listed in the Configuration variables section, mutt
+Along with the variables listed in the Configuration variables section, Mutt

 supports user-defined variables with names starting with my_ as in, for
 example, my_cfgdir.
 
 supports user-defined variables with names starting with my_ as in, for
 example, my_cfgdir.
 

-The set command creates a custom $my_ variable and changes its value. The unset
-and reset commands remove the variable entirely.
+The set command either creates a custom my_ variable or changes its value if it
+does exist already. The unset and reset commands remove the variable entirely.

 
 Since user-defined variables are expanded in the same way that environment
 
 Since user-defined variables are expanded in the same way that environment

-variables are (except for the shell-escape command), this feature can be used
-to make configuration files more readable.
+variables are (except for the shell-escape command and backtick expansion),
+this feature can be used to make configuration files more readable.

 
 

-26.2.2. Examples
+26.3.2. Examples

 
 The following example defines and uses the variable my_cfgdir to abbreviate the
 calls of the source command:
 
 
 The following example defines and uses the variable my_cfgdir to abbreviate the
 calls of the source command:
 

+Example 3.15. Using user-defined variables for config file readability
+

 set my_cfgdir = $HOME/mutt/config
 
 source $my_cfgdir/hooks
 source $my_cfgdir/macros
 # more source commands...
 
 set my_cfgdir = $HOME/mutt/config
 
 source $my_cfgdir/hooks
 source $my_cfgdir/macros
 # more source commands...
 

+

 A custom variable can also be used in macros to backup the current value of
 another variable. In the following example, the value of the $delete is changed
 temporarily while its original value is saved as my_delete. After the macro has
 executed all commands, the original value of $delete is restored.
 
 A custom variable can also be used in macros to backup the current value of
 another variable. In the following example, the value of the $delete is changed
 temporarily while its original value is saved as my_delete. After the macro has
 executed all commands, the original value of $delete is restored.
 

+Example 3.16. Using user-defined variables for backing up other config option
+values
+

 macro pager ,x '\
 <enter-command>set my_delete=$delete<enter>\
 <enter-command>set delete=yes<enter>\
 ...\
 <enter-command>set delete=$my_delete<enter>'
 
 macro pager ,x '\
 <enter-command>set my_delete=$delete<enter>\
 <enter-command>set delete=yes<enter>\
 ...\
 <enter-command>set delete=$my_delete<enter>'
 

-Since mutt expands such values already when parsing the configuration file(s),
+
+Since Mutt expands such values already when parsing the configuration file(s),

 the value of $my_delete in the last example would be the value of $delete
 exactly as it was at that point during parsing the configuration file. If
 another statement would change the value for $delete later in the same or
 the value of $my_delete in the last example would be the value of $delete
 exactly as it was at that point during parsing the configuration file. If
 another statement would change the value for $delete later in the same or


@@ -2565,102 +3099,174 @@ another file, it would have no effect on $my_delete. However, the expansion can
 be deferred to runtime, as shown in the next example, when escaping the dollar
 sign.
 
 be deferred to runtime, as shown in the next example, when escaping the dollar
 sign.
 

+Example 3.17. Deferring user-defined variable expansion to runtime
+

 macro pager <PageDown> "\
 <enter-command> set my_old_pager_stop=\$pager_stop pager_stop<Enter>\
 <next-page>\
 <enter-command> set pager_stop=\$my_old_pager_stop<Enter>\
 <enter-command> unset my_old_pager_stop<Enter>"
 
 macro pager <PageDown> "\
 <enter-command> set my_old_pager_stop=\$pager_stop pager_stop<Enter>\
 <next-page>\
 <enter-command> set pager_stop=\$my_old_pager_stop<Enter>\
 <enter-command> unset my_old_pager_stop<Enter>"
 

+

 Note that there is a space between <enter-command> and the set configuration
 Note that there is a space between <enter-command> and the set configuration

-command, preventing mutt from recording the macro's commands into its history.
+command, preventing Mutt from recording the macro's commands into its history.

 
 

-27. Reading initialization commands from another file
+27. Reading Initialization Commands From Another File

 
 

-Usage: sourcefilename
+Usage:
+
+source filename

 
 This command allows the inclusion of initialization commands from other files.
 
 This command allows the inclusion of initialization commands from other files.

-For example, I place all of my aliases in ~/.mail_aliases so that I can make my
-~/.muttrc readable and keep my aliases private.
+For example, I place all of my aliases in ?/.mail_aliases so that I can make my
+?/.muttrc readable and keep my aliases private.

 
 

-If the filename begins with a tilde (``~''), it will be expanded to the path of
+If the filename begins with a tilde (???), it will be expanded to the path of

 your home directory.
 
 your home directory.
 

-If the filename ends with a vertical bar (|), then filename is considered to be
-an executable program from which to read input (eg. source ~/bin/myscript|).
+If the filename ends with a vertical bar (?|?), then filename is considered to
+be an executable program from which to read input (eg. source ?/bin/myscript|).
+
+28. Removing Hooks

 
 

-28. Removing hooks
+Usage:

 
 

-Usage: unhook [ * | hook-type ]
+unhook { * | hook-type }

 
 This command permits you to flush hooks you have previously defined. You can
 
 This command permits you to flush hooks you have previously defined. You can

-either remove all hooks by giving the ``*'' character as an argument, or you
-can remove all hooks of a specific type by saying something like unhook
-send-hook.
+either remove all hooks by giving the ?*? character as an argument, or you can
+remove all hooks of a specific type by saying something like unhook send-hook.

 
 29. Format Strings
 
 29.1. Basic usage
 
 Format strings are a general concept you'll find in several locations through
 
 29. Format Strings
 
 29.1. Basic usage
 
 Format strings are a general concept you'll find in several locations through

-the mutt configuration, especially in the $index_format", $pager_format",
-$status_format", and other ``*_format'' variables. These can be very
-straightforward, and it's quite possible you already know how to use them.
+the Mutt configuration, especially in the $index_format, $pager_format,
+$status_format, and other related variables. These can be very straightforward,
+and it's quite possible you already know how to use them.

 
 The most basic format string element is a percent symbol followed by another
 character. For example, %s represents a message's Subject: header in the
 
 The most basic format string element is a percent symbol followed by another
 character. For example, %s represents a message's Subject: header in the

-$index_format" variable. The ``expandos'' available are documented with each
+$index_format variable. The ?expandos? available are documented with each

 format variable, but there are general modifiers available with all formatting
 expandos, too. Those are our concern here.
 
 format variable, but there are general modifiers available with all formatting
 expandos, too. Those are our concern here.
 

-Some of the modifers are borrowed right out of C (though you might know them
-from Perl, Python, shell, or another langugage). These are the [-]m.n
-modifiers, as in %-12.12s. As with such programming languages, these modifiers
-allow you to specify the minumum and maximum size of the resulting string, as
-well as its justification. If the ``-'' sign follows the percent, the string
-will be left-justified instead of right-justified. If there's a number
-immediately following that, it's the minimum amount of space the formatted
-string will occupy -- if it's naturally smaller than that, it will be padded
-out with spaces. If a decimal point and another number follow, that's the
-maximum space allowable -- the string will not be permitted to exceed that
-width, no matter its natural size. Each of these three elements is optional, so
-that all these are legal format strings: %-12s%4c%.15F%-12.15L
+Some of the modifiers are borrowed right out of C (though you might know them
+from Perl, Python, shell, or another language). These are the [-]m.n modifiers,
+as in %-12.12s. As with such programming languages, these modifiers allow you
+to specify the minimum and maximum size of the resulting string, as well as its
+justification. If the ?-? sign follows the percent, the string will be
+left-justified instead of right-justified. If there's a number immediately
+following that, it's the minimum amount of space the formatted string will
+occupy ? if it's naturally smaller than that, it will be padded out with
+spaces. If a decimal point and another number follow, that's the maximum space
+allowable ? the string will not be permitted to exceed that width, no matter
+its natural size. Each of these three elements is optional, so that all these
+are legal format strings: %-12s, %4c, %.15F and %-12.15L.

 
 Mutt adds some other modifiers to format strings. If you use an equals symbol
 (=) as a numeric prefix (like the minus above), it will force the string to be
 centered within its minimum space range. For example, %=14y will reserve 14
 
 Mutt adds some other modifiers to format strings. If you use an equals symbol
 (=) as a numeric prefix (like the minus above), it will force the string to be
 centered within its minimum space range. For example, %=14y will reserve 14

-characters for the %y expansion -- that's the X-Label: header, in
-$index_format. If the expansion results in a string less than 14 characters, it
-will be centered in a 14-character space. If the X-Label for a message were
-"test", that expansion would look like `` test ''.
+characters for the %y expansion ? that's the X-Label: header, in $index_format.
+If the expansion results in a string less than 14 characters, it will be
+centered in a 14-character space. If the X-Label for a message were ?test?,
+that expansion would look like ?     test     ?.

 
 There are two very little-known modifiers that affect the way that an expando
 
 There are two very little-known modifiers that affect the way that an expando

-is replaced. If there is an underline (``_'') character between any format
+is replaced. If there is an underline (?_?) character between any format

 modifiers (as above) and the expando letter, it will expands in all lower case.
 modifiers (as above) and the expando letter, it will expands in all lower case.

-And if you use a colon (``:''), it will replace all decimal points with
+And if you use a colon (?:?), it will replace all decimal points with

 underlines.
 
 underlines.
 

-29.2. Filters
+29.2. Conditionals

 
 

-Any format string ending in a vertical bar (``|'') will be expanded and piped
-through the first word in the string, using spaces as separator. The string
-returned will be used for display. If the returned string ends in %, it will be
-passed through the formatter a second time. This allows the filter to generate
-a replacement format string including % expandos.
+Depending on the format string variable, some of its sequences can be used to
+optionally print a string if their value is nonzero. For example, you may only
+want to see the number of flagged messages if such messages exist, since zero
+is not particularly meaningful. To optionally print a string based upon one of
+the above sequences, the following construct is used:

 
 

-All % expandos in a format string are expanded before the script is called so
-that:
+%?<sequence_char>?<optional_string>?

 
 

-set status_format="script.sh '%r %f (%L)'|"
+where sequence_char is an expando, and optional_string is the string you would
+like printed if sequence_char is nonzero. optional_string may contain other
+sequences as well as normal text, but you may not nest optional strings.

 
 

-will make mutt expand %r, %f and %L before calling the script. The example also
-shows that arguments can be quoted: the script will receive the expanded string
-between the single quotes as the only argument.
+Here is an example illustrating how to optionally print the number of new
+messages in a mailbox in $status_format:

 
 

-A practical example is the mutt_xtitle script installed in the samples
-subdirectory of the mutt documentation: it can be used as filter for
-$status_format to set the current terminal's title, if supported.
+%?n?%n new messages.?

 
 

-Chapter 4. Advanced Usage
+You can also switch between two strings using the following construct:
+
+%?<sequence_char>?<if_string>&<else_string>?
+
+If the value of sequence_char is non-zero, if_string will be expanded,
+otherwise else_string will be expanded.
+
+29.3. Filters
+
+Any format string ending in a vertical bar (?|?) will be expanded and piped
+through the first word in the string, using spaces as separator. The string
+returned will be used for display. If the returned string ends in %, it will be
+passed through the formatter a second time. This allows the filter to generate
+a replacement format string including % expandos.
+
+All % expandos in a format string are expanded before the script is called so
+that:
+
+Example 3.18. Using external filters in format strings
+
+set status_format="script.sh '%r %f (%L)'|"
+
+
+will make Mutt expand %r, %f and %L before calling the script. The example also
+shows that arguments can be quoted: the script will receive the expanded string
+between the single quotes as the only argument.
+
+A practical example is the mutt_xtitle script installed in the samples
+subdirectory of the Mutt documentation: it can be used as filter for
+$status_format to set the current terminal's title, if supported.
+
+29.4. Padding
+
+In most format strings, Mutt supports different types of padding using special
+%-expandos:
+
+%|X
+
+    When this occurs, Mutt will fill the rest of the line with the character X.
+    For example, filling the rest of the line with dashes is done by setting:
+
+    set status_format = "%v on %h: %B: %?n?%n&no? new messages %|-"
+
+%>X
+
+    Since the previous expando stops at the end of line, there must be a way to
+    fill the gap between two items via the %>X expando: it puts as many
+    characters X in between two items so that the rest of the line will be
+    right-justified. For example, to not put the version string and hostname
+    the above example on the left but on the right and fill the gap with
+    spaces, one might use (note the space after %>):
+
+    set status_format = "%B: %?n?%n&no? new messages %> (%v on %h)"
+
+%*X
+
+    Normal right-justification will print everything to the left of the %>,
+    displaying padding and whatever lies to the right only if there's room. By
+    contrast, ?soft-fill? gives priority to the right-hand side, guaranteeing
+    space to display it and showing padding only if there's still room. If
+    necessary, soft-fill will eat text leftwards to make room for rightward
+    text. For example, to right-justify the subject making sure as much as
+    possible of it fits on screen, one might use (note two spaces after %* :
+    the second ensures there's a space between the truncated right-hand side
+    and the subject):
+
+    set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?)%*  %s"
+
+Chapter 4. Advanced Usage

 
 Table of Contents
 
 
 Table of Contents
 


@@ -2668,8 +3274,8 @@ Table of Contents
 2. Patterns: Searching, Limiting and Tagging
 
     2.1. Pattern Modifier
 2. Patterns: Searching, Limiting and Tagging
 
     2.1. Pattern Modifier

-    2.2. Simple Patterns
-    2.3. Complex Patterns
+    2.2. Simple Searches
+    2.3. Nesting and Boolean Operators

     2.4. Searching by Date
 
 3. Using Tags
     2.4. Searching by Date
 
 3. Using Tags


@@ -2681,111 +3287,107 @@ Table of Contents
 6. Mailbox Formats
 7. Mailbox Shortcuts
 8. Handling Mailing Lists
 6. Mailbox Formats
 7. Mailbox Shortcuts
 8. Handling Mailing Lists

-9. Editing threads
+9. Handling multiple folders
+10. Editing Threads

 
 

-    9.1. Linking threads
-    9.2. Breaking threads
+    10.1. Linking Threads
+    10.2. Breaking Threads

 
 

-10. Delivery Status Notification (DSN) Support
-11. Start a WWW Browser on URLs (EXTERNAL)
+11. Delivery Status Notification (DSN) Support
+12. Start a WWW Browser on URLs
+13. Miscellany

 
 1. Regular Expressions
 
 All string patterns in Mutt including those in more complex patterns must be
 
 1. Regular Expressions
 
 All string patterns in Mutt including those in more complex patterns must be

-specified using regular expressions (regexp) in the ``POSIX extended'' syntax
+specified using regular expressions (regexp) in the ?POSIX extended? syntax

 (which is more or less the syntax used by egrep and GNU awk). For your
 convenience, we have included below a brief description of this syntax.
 
 The search is case sensitive if the pattern contains at least one upper case
 (which is more or less the syntax used by egrep and GNU awk). For your
 convenience, we have included below a brief description of this syntax.
 
 The search is case sensitive if the pattern contains at least one upper case

-letter, and case insensitive otherwise. Note that ``\'' must be quoted if used
-for a regular expression in an initialization command: ``\\''.
+letter, and case insensitive otherwise.
+
+Note
+
+?\? must be quoted if used for a regular expression in an initialization
+command: ?\\?.

 
 A regular expression is a pattern that describes a set of strings. Regular
 expressions are constructed analogously to arithmetic expressions, by using
 various operators to combine smaller expressions.
 
 
 A regular expression is a pattern that describes a set of strings. Regular
 expressions are constructed analogously to arithmetic expressions, by using
 various operators to combine smaller expressions.
 

-Note that the regular expression can be enclosed/delimited by either " or '
-which is useful if the regular expression includes a white-space character. See
-Syntax of Initialization Files for more information on " and ' delimiter
-processing. To match a literal " or ' you must preface it with \ (backslash).
+Note
+
+The regular expression can be enclosed/delimited by either " or ' which is
+useful if the regular expression includes a white-space character. See Syntax
+of Initialization Files for more information on " and ' delimiter processing.
+To match a literal " or ' you must preface it with \ (backslash).

 
 The fundamental building blocks are the regular expressions that match a single
 character. Most characters, including all letters and digits, are regular
 expressions that match themselves. Any metacharacter with special meaning may
 be quoted by preceding it with a backslash.
 
 
 The fundamental building blocks are the regular expressions that match a single
 character. Most characters, including all letters and digits, are regular
 expressions that match themselves. Any metacharacter with special meaning may
 be quoted by preceding it with a backslash.
 

-The period ``.'' matches any single character. The caret ``^'' and the dollar
-sign ``$'' are metacharacters that respectively match the empty string at the
+The period ?.? matches any single character. The caret ?^? and the dollar sign
+?$? are metacharacters that respectively match the empty string at the

 beginning and end of a line.
 
 beginning and end of a line.
 

-A list of characters enclosed by ``['' and ``]'' matches any single character
-in that list; if the first character of the list is a caret ``^'' then it
-matches any character not in the list. For example, the regular expression
-[0123456789] matches any single digit. A range of ASCII characters may be
-specified by giving the first and last characters, separated by a hyphen ``-''.
-Most metacharacters lose their special meaning inside lists. To include a
-literal ``]'' place it first in the list. Similarly, to include a literal ``^''
-place it anywhere but first. Finally, to include a literal hyphen ``-'' place
-it last.
+A list of characters enclosed by ?[? and ?]? matches any single character in
+that list; if the first character of the list is a caret ?^? then it matches
+any character not in the list. For example, the regular expression [0123456789]
+matches any single digit. A range of ASCII characters may be specified by
+giving the first and last characters, separated by a hyphen ?-?. Most
+metacharacters lose their special meaning inside lists. To include a literal ?]
+? place it first in the list. Similarly, to include a literal ?^? place it
+anywhere but first. Finally, to include a literal hyphen ?-? place it last.

 
 Certain named classes of characters are predefined. Character classes consist
 
 Certain named classes of characters are predefined. Character classes consist

-of ``[:'', a keyword denoting the class, and ``:]''. The following classes are
-defined by the POSIX standard:
-
-[:alnum:]
-
-    Alphanumeric characters.
-
-[:alpha:]
-
-    Alphabetic characters.
-
-[:blank:]
-
-    Space or tab characters.
-
-[:cntrl:]
-
-    Control characters.
-
-[:digit:]
-
-    Numeric characters.
-
-[:graph:]
-
-    Characters that are both printable and visible. (A space is printable, but
-    not visible, while an ``a'' is both.)
-
-[:lower:]
-
-    Lower-case alphabetic characters.
-
-[:print:]
-
-    Printable characters (characters that are not control characters.)
-
-[:punct:]
-
-    Punctuation characters (characters that are not letter, digits, control
-    characters, or space characters).
-
-[:space:]
-
-    Space characters (such as space, tab and formfeed, to name a few).
+of ?[:?, a keyword denoting the class, and ?:]?. The following classes are
+defined by the POSIX standard in Table 4.1, ?POSIX regular expression character
+classes?
+
+Table 4.1. POSIX regular expression character classes
+
++-----------------------------------------------------------------------------+
+|Character |                           Description                            |
+|  class   |                                                                  |
+|----------+------------------------------------------------------------------|
+|[:alnum:] |Alphanumeric characters                                           |
+|----------+------------------------------------------------------------------|
+|[:alpha:] |Alphabetic characters                                             |
+|----------+------------------------------------------------------------------|
+|[:blank:] |Space or tab characters                                           |
+|----------+------------------------------------------------------------------|
+|[:cntrl:] |Control characters                                                |
+|----------+------------------------------------------------------------------|
+|[:digit:] |Numeric characters                                                |
+|----------+------------------------------------------------------------------|
+|[:graph:] |Characters that are both printable and visible. (A space is       |
+|          |printable, but not visible, while an ?a? is both)                 |
+|----------+------------------------------------------------------------------|
+|[:lower:] |Lower-case alphabetic characters                                  |
+|----------+------------------------------------------------------------------|
+|[:print:] |Printable characters (characters that are not control characters) |
+|----------+------------------------------------------------------------------|
+|[:punct:] |Punctuation characters (characters that are not letter, digits,   |
+|          |control characters, or space characters)                          |
+|----------+------------------------------------------------------------------|
+|[:space:] |Space characters (such as space, tab and formfeed, to name a few) |
+|----------+------------------------------------------------------------------|
+|[:upper:] |Upper-case alphabetic characters                                  |
+|----------+------------------------------------------------------------------|
+|[:xdigit:]|Characters that are hexadecimal digits                            |
++-----------------------------------------------------------------------------+

 
 

-[:upper:]

 
 

-    Upper-case alphabetic characters.
-
-[:xdigit:]
+A character class is only valid in a regular expression inside the brackets of
+a character list.

 
 

-    Characters that are hexadecimal digits.
+Note

 
 

-A character class is only valid in a regular expression inside the brackets of
-a character list. Note that the brackets in these class names are part of the
-symbolic names, and must be included in addition to the brackets delimiting the
-bracket list. For example, [[:digit:]] is equivalent to [0-9].
+Note that the brackets in these class names are part of the symbolic names, and
+must be included in addition to the brackets delimiting the bracket list. For
+example, [[:digit:]] is equivalent to [0-9].

 
 Two additional special sequences can appear in character lists. These apply to
 non-ASCII character sets, which can have single symbols (called collating
 
 Two additional special sequences can appear in character lists. These apply to
 non-ASCII character sets, which can have single symbols (called collating


@@ -2794,455 +3396,477 @@ characters that are equivalent for collating or sorting purposes:
 
 Collating Symbols
 
 
 Collating Symbols
 

-    A collating symbol is a multi-character collating element enclosed in
-    ``[.'' and ``.]''. For example, if ``ch'' is a collating element, then
-    [[.ch.]] is a regexp that matches this collating element, while [ch] is a
-    regexp that matches either ``c'' or ``h''.
+    A collating symbol is a multi-character collating element enclosed in ?[.?
+    and ?.]?. For example, if ?ch? is a collating element, then [[.ch.]] is a
+    regexp that matches this collating element, while [ch] is a regexp that
+    matches either ?c? or ?h?.

 
 Equivalence Classes
 
     An equivalence class is a locale-specific name for a list of characters
 
 Equivalence Classes
 
     An equivalence class is a locale-specific name for a list of characters

-    that are equivalent. The name is enclosed in ``[='' and ``=]''. For
-    example, the name ``e'' might be used to represent all of ``è'' ``é'' and
-    ``e''. In this case, [[=e=]] is a regexp that matches any of ``è'', ``é''
-    and ``e''.
+    that are equivalent. The name is enclosed in ?[=? and ?=]?. For example,
+    the name ?e? might be used to represent all of ??? ??? and ?e?. In this
+    case, [[=e=]] is a regexp that matches any of ???, ??? and ?e?.

 
 A regular expression matching a single character may be followed by one of
 
 A regular expression matching a single character may be followed by one of

-several repetition operators:
-
-?
-
-    The preceding item is optional and matched at most once.
-
-*
-
-    The preceding item will be matched zero or more times.
-
-+
-
-    The preceding item will be matched one or more times.
-
-{n}
-
-    The preceding item is matched exactly n times.
-
-{n,}
-
-    The preceding item is matched n or more times.
-
-{,m}
-
-    The preceding item is matched at most m times.
-
-{n,m}
+several repetition operators described in Table 4.2, ?Regular expression
+repetition operators?.
+
+Table 4.2. Regular expression repetition operators
+
++-----------------------------------------------------------------------------+
+|Operator|                            Description                             |
+|--------+--------------------------------------------------------------------|
+|?       |The preceding item is optional and matched at most once             |
+|--------+--------------------------------------------------------------------|
+|*       |The preceding item will be matched zero or more times               |
+|--------+--------------------------------------------------------------------|
+|+       |The preceding item will be matched one or more times                |
+|--------+--------------------------------------------------------------------|
+|{n}     |The preceding item is matched exactly n times                       |
+|--------+--------------------------------------------------------------------|
+|{n,}    |The preceding item is matched n or more times                       |
+|--------+--------------------------------------------------------------------|
+|{,m}    |The preceding item is matched at most m times                       |
+|--------+--------------------------------------------------------------------|
+|{n,m}   |The preceding item is matched at least n times, but no more than m  |
+|        |times                                                               |
++-----------------------------------------------------------------------------+

 
 

-    The preceding item is matched at least n times, but no more than m times.

 
 Two regular expressions may be concatenated; the resulting regular expression
 matches any string formed by concatenating two substrings that respectively
 match the concatenated subexpressions.
 
 
 Two regular expressions may be concatenated; the resulting regular expression
 matches any string formed by concatenating two substrings that respectively
 match the concatenated subexpressions.
 

-Two regular expressions may be joined by the infix operator ``|''; the
-resulting regular expression matches any string matching either subexpression.
+Two regular expressions may be joined by the infix operator ?|?; the resulting
+regular expression matches any string matching either subexpression.

 
 Repetition takes precedence over concatenation, which in turn takes precedence
 over alternation. A whole subexpression may be enclosed in parentheses to
 override these precedence rules.
 
 
 Repetition takes precedence over concatenation, which in turn takes precedence
 over alternation. A whole subexpression may be enclosed in parentheses to
 override these precedence rules.
 

-Note: If you compile Mutt with the GNU rx package, the following operators may
-also be used in regular expressions:
+Note
+
+If you compile Mutt with the included regular expression engine, the following
+operators may also be used in regular expressions as described in Table 4.3,
+?GNU regular expression extensions?.
+
+Table 4.3. GNU regular expression extensions
+
++-----------------------------------------------------------------------------+
+|Expression|                           Description                            |
+|----------+------------------------------------------------------------------|
+|\\y       |Matches the empty string at either the beginning or the end of a  |
+|          |word                                                              |
+|----------+------------------------------------------------------------------|
+|\\B       |Matches the empty string within a word                            |
+|----------+------------------------------------------------------------------|
+|\\<       |Matches the empty string at the beginning of a word               |
+|----------+------------------------------------------------------------------|
+|\\>       |Matches the empty string at the end of a word                     |
+|----------+------------------------------------------------------------------|
+|\\w       |Matches any word-constituent character (letter, digit, or         |
+|          |underscore)                                                       |
+|----------+------------------------------------------------------------------|
+|\\W       |Matches any character that is not word-constituent                |
+|----------+------------------------------------------------------------------|
+|\\`       |Matches the empty string at the beginning of a buffer (string)    |
+|----------+------------------------------------------------------------------|
+|\\'       |Matches the empty string at the end of a buffer                   |
++-----------------------------------------------------------------------------+

 
 

-\\y
-
-    Matches the empty string at either the beginning or the end of a word.
-
-\\B
-
-    Matches the empty string within a word.
-
-\\<
-
-    Matches the empty string at the beginning of a word.
-
-\\>
-
-    Matches the empty string at the end of a word.
-
-\\w
-
-    Matches any word-constituent character (letter, digit, or underscore).
-
-\\W
-
-    Matches any character that is not word-constituent.
-
-\\`
-
-    Matches the empty string at the beginning of a buffer (string).
-
-\\'
-
-    Matches the empty string at the end of a buffer.

 
 Please note however that these operators are not defined by POSIX, so they may
 or may not be available in stock libraries on various systems.
 
 2. Patterns: Searching, Limiting and Tagging
 
 
 Please note however that these operators are not defined by POSIX, so they may
 or may not be available in stock libraries on various systems.
 
 2. Patterns: Searching, Limiting and Tagging
 

+2.1. Pattern Modifier
+

 Many of Mutt's commands allow you to specify a pattern to match (limit,
 Many of Mutt's commands allow you to specify a pattern to match (limit,

-tag-pattern, delete-pattern, etc.). Table 4.1, "Pattern modifiers" shows
+tag-pattern, delete-pattern, etc.). Table 4.4, ?Pattern modifiers? shows

 several ways to select messages.
 
 several ways to select messages.
 

-Table 4.1. Pattern modifiers
-
-┌─────────┬───────────────────────────────────────────────────────────────────┐
-│ Pattern │                            Description                            │
-│modifier │                                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~A       │all messages                                                       │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~b EXPR  │messages which contain EXPR in the message body                    │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│         │messages which contain STRING in the message body. If IMAP is      │
-│=b STRING│enabled, searches for STRING on the server, rather than downloading│
-│         │each message and searching it locally.                             │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~B EXPR  │messages which contain EXPR in the whole message                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~c EXPR  │messages carbon-copied to EXPR                                     │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│%c GROUP │messages carbon-copied to any member of GROUP                      │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~C EXPR  │message is either to: or cc: EXPR                                  │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│%C GROUP │message is either to: or cc: to any member of GROUP                │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~d [MIN]-│messages with ``date-sent'' in a Date range                        │
-│[MAX]    │                                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~D       │deleted messages                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~e EXPR  │message which contains EXPR in the ``Sender'' field                │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│%e GROUP │message which contain a member of GROUP in the ``Sender'' field    │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~E       │expired messages                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~F       │flagged messages                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~f EXPR  │messages originating from EXPR                                     │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│%f GROUP │messages originating from any member of GROUP                      │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~g       │cryptographically signed messages                                  │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~G       │cryptographically encrypted messages                               │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~h EXPR  │messages which contain EXPR in the message header                  │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~H EXPR  │messages with a spam attribute matching EXPR                       │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~i EXPR  │message which match EXPR in the ``Message-ID'' field               │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~k       │message contains PGP key material                                  │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~L EXPR  │message is either originated or received by EXPR                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│%L GROUP │message is either originated or received by any member of GROUP    │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~l       │message is addressed to a known mailing list                       │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~m [MIN]-│message in the range MIN to MAX *)                                 │
-│[MAX]    │                                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~n [MIN]-│messages with a score in the range MIN to MAX *)                   │
-│[MAX]    │                                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~N       │new messages                                                       │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~O       │old messages                                                       │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~p       │message is addressed to you (consults alternates)                  │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~P       │message is from you (consults alternates)                          │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~Q       │messages which have been replied to                                │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~r [MIN]-│messages with ``date-received'' in a Date range                    │
-│[MAX]    │                                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~R       │read messages                                                      │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~s EXPR  │messages having EXPR in the ``Subject'' field.                     │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~S       │superseded messages                                                │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~t EXPR  │messages addressed to EXPR                                         │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~T       │tagged messages                                                    │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~u       │message is addressed to a subscribed mailing list                  │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~U       │unread messages                                                    │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~v       │message is part of a collapsed thread.                             │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~V       │cryptographically verified messages                                │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~x EXPR  │messages which contain EXPR in the `References' field              │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~X [MIN]-│messages with MIN to MAX attachments *)                            │
-│[MAX]    │                                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~y EXPR  │messages which contain EXPR in the `X-Label' field                 │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~z [MIN]-│messages with a size in the range MIN to MAX *)                    │
-│[MAX]    │                                                                   │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~=       │duplicated messages (see $duplicate_threads)                       │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~$       │unreferenced messages (requires threaded view)                     │
-├─────────┼───────────────────────────────────────────────────────────────────┤
-│~        │messages in threads containing messages matching a certain pattern,│
-│(PATTERN)│e.g. all threads containing messages from you: ~(~P)               │
-└─────────┴───────────────────────────────────────────────────────────────────┘
-
-
-Where EXPR is a regular expression. Special attention has to be made when using
-regular expressions inside of patterns. Specifically, Mutt's parser for these
-patterns will strip one level of backslash (\), which is normally used for
-quoting. If it is your intention to use a backslash in the regular expression,
-you will need to use two backslashes instead (\\). You can force mutt to treat
-EXPR as a simple string instead of a regular expression by using = instead of ~
-in the pattern name. For example, =b *.* will find all messages that contain
-the literal string '*.*'. Simple string matches are less powerful than regular
-expressions but can be considerably faster. This is especially true for IMAP
-folders, because string matches can be performed on the server instead of by
-fetching every message. IMAP treats =h specially: it must be of the form
-"header: substring" and will not partially match header names. The substring
-part may be omitted if you simply wish to find messages containing a particular
-header without regard to its value.
-
-*) The forms <[MAX], >[MIN], [MIN]- and -[MAX] are allowed, too.
-
-2.1. Pattern Modifier
+Table 4.4. Pattern modifiers
+
++-----------------------------------------------------------------------------+
+| Pattern |                            Description                            |
+|modifier |                                                                   |
+|---------+-------------------------------------------------------------------|
+|~A       |all messages                                                       |
+|---------+-------------------------------------------------------------------|
+|~b EXPR  |messages which contain EXPR in the message body                    |
+|---------+-------------------------------------------------------------------|
+|         |messages which contain STRING in the message body. If IMAP is      |
+|=b STRING|enabled, searches for STRING on the server, rather than downloading|
+|         |each message and searching it locally.                             |
+|---------+-------------------------------------------------------------------|
+|~B EXPR  |messages which contain EXPR in the whole message                   |
+|---------+-------------------------------------------------------------------|
+|~c EXPR  |messages carbon-copied to EXPR                                     |
+|---------+-------------------------------------------------------------------|
+|%c GROUP |messages carbon-copied to any member of GROUP                      |
+|---------+-------------------------------------------------------------------|
+|~C EXPR  |messages either to: or cc: EXPR                                    |
+|---------+-------------------------------------------------------------------|
+|%C GROUP |messages either to: or cc: to any member of GROUP                  |
+|---------+-------------------------------------------------------------------|
+|~d [MIN]-|messages with ?date-sent? in a Date range                          |
+|[MAX]    |                                                                   |
+|---------+-------------------------------------------------------------------|
+|~D       |deleted messages                                                   |
+|---------+-------------------------------------------------------------------|
+|~e EXPR  |messages which contains EXPR in the ?Sender? field                 |
+|---------+-------------------------------------------------------------------|
+|%e GROUP |messages which contain a member of GROUP in the ?Sender? field     |
+|---------+-------------------------------------------------------------------|
+|~E       |expired messages                                                   |
+|---------+-------------------------------------------------------------------|
+|~F       |flagged messages                                                   |
+|---------+-------------------------------------------------------------------|
+|~f EXPR  |messages originating from EXPR                                     |
+|---------+-------------------------------------------------------------------|
+|%f GROUP |messages originating from any member of GROUP                      |
+|---------+-------------------------------------------------------------------|
+|~g       |cryptographically signed messages                                  |
+|---------+-------------------------------------------------------------------|
+|~G       |cryptographically encrypted messages                               |
+|---------+-------------------------------------------------------------------|
+|~h EXPR  |messages which contain EXPR in the message header                  |
+|---------+-------------------------------------------------------------------|
+|~H EXPR  |messages with a spam attribute matching EXPR                       |
+|---------+-------------------------------------------------------------------|
+|~i EXPR  |messages which match EXPR in the ?Message-ID? field                |
+|---------+-------------------------------------------------------------------|
+|~k       |messages which contain PGP key material                            |
+|---------+-------------------------------------------------------------------|
+|~L EXPR  |messages either originated or received by EXPR                     |
+|---------+-------------------------------------------------------------------|
+|%L GROUP |message either originated or received by any member of GROUP       |
+|---------+-------------------------------------------------------------------|
+|~l       |messages addressed to a known mailing list                         |
+|---------+-------------------------------------------------------------------|
+|~m [MIN]-|messages in the range MIN to MAX *)                                |
+|[MAX]    |                                                                   |
+|---------+-------------------------------------------------------------------|
+|~n [MIN]-|messages with a score in the range MIN to MAX *)                   |
+|[MAX]    |                                                                   |
+|---------+-------------------------------------------------------------------|
+|~N       |new messages                                                       |
+|---------+-------------------------------------------------------------------|
+|~O       |old messages                                                       |
+|---------+-------------------------------------------------------------------|
+|~p       |messages addressed to you (consults alternates)                    |
+|---------+-------------------------------------------------------------------|
+|~P       |messages from you (consults alternates)                            |
+|---------+-------------------------------------------------------------------|
+|~Q       |messages which have been replied to                                |
+|---------+-------------------------------------------------------------------|
+|~r [MIN]-|messages with ?date-received? in a Date range                      |
+|[MAX]    |                                                                   |
+|---------+-------------------------------------------------------------------|
+|~R       |read messages                                                      |
+|---------+-------------------------------------------------------------------|
+|~s EXPR  |messages having EXPR in the ?Subject? field.                       |
+|---------+-------------------------------------------------------------------|
+|~S       |superseded messages                                                |
+|---------+-------------------------------------------------------------------|
+|~t EXPR  |messages addressed to EXPR                                         |
+|---------+-------------------------------------------------------------------|
+|~T       |tagged messages                                                    |
+|---------+-------------------------------------------------------------------|
+|~u       |messages addressed to a subscribed mailing list                    |
+|---------+-------------------------------------------------------------------|
+|~U       |unread messages                                                    |
+|---------+-------------------------------------------------------------------|
+|~v       |messages part of a collapsed thread.                               |
+|---------+-------------------------------------------------------------------|
+|~V       |cryptographically verified messages                                |
+|---------+-------------------------------------------------------------------|
+|~x EXPR  |messages which contain EXPR in the ?References? or ?In-Reply-To?   |
+|         |field                                                              |
+|---------+-------------------------------------------------------------------|
+|~X [MIN]-|messages with MIN to MAX attachments *)                            |
+|[MAX]    |                                                                   |
+|---------+-------------------------------------------------------------------|
+|~y EXPR  |messages which contain EXPR in the ?X-Label? field                 |
+|---------+-------------------------------------------------------------------|
+|~z [MIN]-|messages with a size in the range MIN to MAX *) **)                |
+|[MAX]    |                                                                   |
+|---------+-------------------------------------------------------------------|
+|~=       |duplicated messages (see $duplicate_threads)                       |
+|---------+-------------------------------------------------------------------|
+|~$       |unreferenced messages (requires threaded view)                     |
+|---------+-------------------------------------------------------------------|
+|~(PATTERN|messages in threads containing messages matching PATTERN, e.g. all |
+|)        |threads containing messages from you: ~(~P)                        |
++-----------------------------------------------------------------------------+
+
+
+Where EXPR is a regular expression.
+
+*) The forms ?<[MAX]?, ?>[MIN]?, ?[MIN]-? and ?-[MAX]? are allowed, too.
+
+**) The suffixes ?K? and ?M? are allowed to specify kilobyte and megabyte
+respectively.

 
 

-Note that patterns matching 'lists' of addresses (notably c,C,p,P and t) match
-if there is at least one match in the whole list. If you want to make sure that
-all elements of that list match, you need to prefix your pattern with ^. This
+Special attention has to be payed when using regular expressions inside of
+patterns. Specifically, Mutt's parser for these patterns will strip one level
+of backslash (?\?), which is normally used for quoting. If it is your intention
+to use a backslash in the regular expression, you will need to use two
+backslashes instead (?\\?). You can force Mutt to treat EXPR as a simple string
+instead of a regular expression by using = instead of ? in the pattern name.
+For example, =b *.* will find all messages that contain the literal string
+?*.*?. Simple string matches are less powerful than regular expressions but can
+be considerably faster. This is especially true for IMAP folders, because
+string matches can be performed on the server instead of by fetching every
+message. IMAP treats =h specially: it must be of the form ?header: substring?
+and will not partially match header names. The substring part may be omitted if
+you simply wish to find messages containing a particular header without regard
+to its value.
+
+Patterns matching lists of addresses (notably c, C, p, P and t) match if there
+is at least one match in the whole list. If you want to make sure that all
+elements of that list match, you need to prefix your pattern with ?^?. This

 example matches all mails which only has recipients from Germany.
 
 example matches all mails which only has recipients from Germany.
 

+Example 4.1. Matching all addresses in address lists
+

 ^~C \.de$
 
 ^~C \.de$
 

-2.2. Simple Patterns

 
 

-Mutt supports two versions of so called ``simple searches'' which are issued if
+2.2. Simple Searches
+
+Mutt supports two versions of so called ?simple searches?. These are issued if

 the query entered for searching, limiting and similar operations does not seem
 the query entered for searching, limiting and similar operations does not seem

-to be a valid pattern (i.e. it does not contain one of these characters: ``~'',
-``='' or ``%''). If the query is supposed to contain one of these special
-characters, they must be escaped by prepending a backslash (``\'').
+to contain a valid pattern modifier (i.e. it does not contain one of these
+characters: ???, ?=? or ?%?). If the query is supposed to contain one of these
+special characters, they must be escaped by prepending a backslash (?\?).

 
 The first type is by checking whether the query string equals a keyword
 
 The first type is by checking whether the query string equals a keyword

-case-insensitively from Table 4.2, "Simple search keywords": If that is the
+case-insensitively from Table 4.5, ?Simple search keywords?: If that is the

 case, Mutt will use the shown pattern modifier instead. If a keyword would
 conflict with your search keyword, you need to turn it into a regular
 expression to avoid matching the keyword table. For example, if you want to
 case, Mutt will use the shown pattern modifier instead. If a keyword would
 conflict with your search keyword, you need to turn it into a regular
 expression to avoid matching the keyword table. For example, if you want to

-find all messages matching ``flag'' (using $simple_search, see below but not
-meaning flagged messages) simply search for ``[f]lag''.
-
-Table 4.2. Simple search keywords
-
-┌───────┬─────────────────┐
-│Keyword│Pattern modifier │
-├───────┼─────────────────┤
-│all    │~A               │
-├───────┼─────────────────┤
-│.      │~A               │
-├───────┼─────────────────┤
-│^      │~A               │
-├───────┼─────────────────┤
-│del    │~D               │
-├───────┼─────────────────┤
-│flag   │~F               │
-├───────┼─────────────────┤
-│new    │~N               │
-├───────┼─────────────────┤
-│old    │~O               │
-├───────┼─────────────────┤
-│repl   │~Q               │
-├───────┼─────────────────┤
-│read   │~R               │
-├───────┼─────────────────┤
-│tag    │~T               │
-├───────┼─────────────────┤
-│unread │~U               │
-└───────┴─────────────────┘
+find all messages matching ?flag? (using $simple_search) but don't want to
+match flagged messages, simply search for ?[f]lag?.
+
+Table 4.5. Simple search keywords
+
++-------------------------+
+|Keyword|Pattern modifier |
+|-------+-----------------|
+|all    |~A               |
+|-------+-----------------|
+|.      |~A               |
+|-------+-----------------|
+|^      |~A               |
+|-------+-----------------|
+|del    |~D               |
+|-------+-----------------|
+|flag   |~F               |
+|-------+-----------------|
+|new    |~N               |
+|-------+-----------------|
+|old    |~O               |
+|-------+-----------------|
+|repl   |~Q               |
+|-------+-----------------|
+|read   |~R               |
+|-------+-----------------|
+|tag    |~T               |
+|-------+-----------------|
+|unread |~U               |
++-------------------------+

 
 
 The second type of simple search is to build a complex search pattern using
 $simple_search as a template. Mutt will insert your query properly quoted and
 search for the composed complex query.
 
 
 
 The second type of simple search is to build a complex search pattern using
 $simple_search as a template. Mutt will insert your query properly quoted and
 search for the composed complex query.
 

-2.3. Complex Patterns
+2.3. Nesting and Boolean Operators

 
 Logical AND is performed by specifying more than one criterion. For example:
 
 ~t mutt ~f elkins
 
 
 Logical AND is performed by specifying more than one criterion. For example:
 
 ~t mutt ~f elkins
 

-would select messages which contain the word ``mutt'' in the list of recipients
-and that have the word ``elkins'' in the ``From'' header field.
+would select messages which contain the word ?mutt? in the list of recipients
+and that have the word ?elkins? in the ?From? header field.

 
 Mutt also recognizes the following operators to create more complex search
 patterns:
 
 
 Mutt also recognizes the following operators to create more complex search
 patterns:
 

-  ● ! -- logical NOT operator
+  * ! ? logical NOT operator

 
 

-  ● | -- logical OR operator
+  * | ? logical OR operator

 
 

-  ● () -- logical grouping operator
+  * () ? logical grouping operator

 
 Here is an example illustrating a complex search pattern. This pattern will
 
 Here is an example illustrating a complex search pattern. This pattern will

-select all messages which do not contain ``mutt'' in the ``To'' or ``Cc'' field
-and which are from ``elkins''.
+select all messages which do not contain ?mutt? in the ?To? or ?Cc? field and
+which are from ?elkins?.
+
+Example 4.2. Using boolean operators in patterns

 
 !(~t mutt|~c mutt) ~f elkins
 
 
 !(~t mutt|~c mutt) ~f elkins
 

+

 Here is an example using white space in the regular expression (note the ' and
 Here is an example using white space in the regular expression (note the ' and

-" delimiters). For this to match, the mail's subject must match the ``^Junk
-+From +Me$'' and it must be from either ``Jim +Somebody'' or ``Ed
-+SomeoneElse'':
+" delimiters). For this to match, the mail's subject must match the ?^Junk
++From +Me$? and it must be from either ?Jim +Somebody? or ?Ed +SomeoneElse?:

 
  '~s "^Junk +From +Me$" ~f ("Jim +Somebody"|"Ed +SomeoneElse")'
 
 
  '~s "^Junk +From +Me$" ~f ("Jim +Somebody"|"Ed +SomeoneElse")'
 

-Note that if a regular expression contains parenthesis, or a vertical bar ("|
-"), you must enclose the expression in double or single quotes since those
-characters are also used to separate different parts of Mutt's pattern
-language. For example,
+Note

 
 

-~f "me@(mutt\.org|cs\.hmc\.edu)"
-
-Without the quotes, the parenthesis wouldn't end. This would be seperated to
-two OR'd patterns: ~f me@(mutt\.org and cs\.hmc\.edu). They are never what you
-want.
+If a regular expression contains parenthesis, or a vertical bar ("|"), you must
+enclose the expression in double or single quotes since those characters are
+also used to separate different parts of Mutt's pattern language. For example:
+~f "me@(mutt\.org|cs\.hmc\.edu)" Without the quotes, the parenthesis wouldn't
+end. This would be separated to two OR'd patterns: ?f me@(mutt\.org and cs\.hmc
+\.edu). They are never what you want.

 
 2.4. Searching by Date
 
 Mutt supports two types of dates, absolute and relative.
 
 
 2.4. Searching by Date
 
 Mutt supports two types of dates, absolute and relative.
 

-Absolute. Dates must be in DD/MM/YY format (month and year are optional,
-defaulting to the current month and year). An example of a valid range of dates
-is:
+2.4.1. Absolute Dates
+
+Dates must be in DD/MM/YY format (month and year are optional, defaulting to
+the current month and year). An example of a valid range of dates is:

 
 Limit to messages matching: ~d 20/1/95-31/10
 
 
 Limit to messages matching: ~d 20/1/95-31/10
 

-If you omit the minimum (first) date, and just specify ``-DD/MM/YY'', all
+If you omit the minimum (first) date, and just specify ?-DD/MM/YY?, all

 messages before the given date will be selected. If you omit the maximum
 messages before the given date will be selected. If you omit the maximum

-(second) date, and specify ``DD/MM/YY-'', all messages after the given date
-will be selected. If you specify a single date with no dash (``-''), only
-messages sent on the given date will be selected.
-
-Error Margins. You can add error margins to absolute dates. An error margin is
-a sign (+ or -), followed by a digit, followed by one of the units in Table
-4.3, "Date units". As a special case, you can replace the sign by a ``*''
-character, which is equivalent to giving identical plus and minus error
-margins.
-
-Table 4.3. Date units
-
-┌────┬────────────┐
-│Unit│Description │
-├────┼────────────┤
-│y   │Years       │
-├────┼────────────┤
-│m   │Months      │
-├────┼────────────┤
-│w   │Weeks       │
-├────┼────────────┤
-│d   │Days        │
-└────┴────────────┘
+(second) date, and specify ?DD/MM/YY-?, all messages after the given date will
+be selected. If you specify a single date with no dash (?-?), only messages
+sent on the given date will be selected.
+
+You can add error margins to absolute dates. An error margin is a sign (+ or
+-), followed by a digit, followed by one of the units in Table 4.6, ?Date
+units?. As a special case, you can replace the sign by a ?*? character, which
+is equivalent to giving identical plus and minus error margins.
+
+Table 4.6. Date units
+
++-----------------+
+|Unit|Description |
+|----+------------|
+|y   |Years       |
+|----+------------|
+|m   |Months      |
+|----+------------|
+|w   |Weeks       |
+|----+------------|
+|d   |Days        |
++-----------------+

 
 
 Example: To select any messages two weeks around January 15, 2001, you'd use
 the following pattern:
 
 
 
 Example: To select any messages two weeks around January 15, 2001, you'd use
 the following pattern:
 

-

 Limit to messages matching: ~d 15/1/2001*2w
 
 Limit to messages matching: ~d 15/1/2001*2w
 

-Relative. This type of date is relative to the current date, and may be
-specified as:
+2.4.2. Relative Dates
+
+This type of date is relative to the current date, and may be specified as:

 
 

-  ● >offset (messages older than offset units)
+  * >offset for messages older than offset units

 
 

-  ● <offset (messages newer than offset units)
+  * <offset for messages newer than offset units

 
 

-  ● =offset (messages exactly offset units old)
+  * =offset for messages exactly offset units old

 
 

-offset is specified as a positive number with one of the units from Table 4.3,
-"Date units".
+offset is specified as a positive number with one of the units from Table 4.6,
+?Date units?.

 
 Example: to select messages less than 1 month old, you would use
 
 Limit to messages matching: ~d <1m
 
 
 Example: to select messages less than 1 month old, you would use
 
 Limit to messages matching: ~d <1m
 

-Note: all dates used when searching are relative to the local time zone, so
-unless you change the setting of your $index_format to include a %[...] format,
-these are not the dates shown in the main index.
+Note
+
+All dates used when searching are relative to the local time zone, so unless
+you change the setting of your $index_format to include a %[...] format, these
+are not the dates shown in the main index.

 
 3. Using Tags
 
 Sometimes it is desirable to perform an operation on a group of messages all at
 once rather than one at a time. An example might be to save messages to a
 mailing list to a separate folder, or to delete all messages with a given
 
 3. Using Tags
 
 Sometimes it is desirable to perform an operation on a group of messages all at
 once rather than one at a time. An example might be to save messages to a
 mailing list to a separate folder, or to delete all messages with a given

-subject. To tag all messages matching a pattern, use the tag-pattern function,
-which is bound to ``shift-T'' by default. Or you can select individual messages
-by hand using the ``tag-message'' function, which is bound to ``t'' by default.
-See patterns for Mutt's pattern matching syntax.
-
-Once you have tagged the desired messages, you can use the ``tag-prefix''
-operator, which is the ``;'' (semicolon) key by default. When the
-``tag-prefix'' operator is used, the next operation will be applied to all
-tagged messages if that operation can be used in that manner. If the $auto_tag
-variable is set, the next operation applies to the tagged messages
-automatically, without requiring the ``tag-prefix''.
-
-In macros or push commands, you can use the ``tag-prefix-cond'' operator. If
-there are no tagged messages, mutt will "eat" the rest of the macro to abort
-it's execution. Mutt will stop "eating" the macro when it encounters the
-``end-cond'' operator; after this operator the rest of the macro will be
-executed as normal.
+subject. To tag all messages matching a pattern, use the <tag-pattern>
+function, which is bound to ?shift-T? by default. Or you can select individual
+messages by hand using the <tag-message> function, which is bound to ?t? by
+default. See patterns for Mutt's pattern matching syntax.
+
+Once you have tagged the desired messages, you can use the ?tag-prefix?
+operator, which is the ?;? (semicolon) key by default. When the ?tag-prefix?
+operator is used, the next operation will be applied to all tagged messages if
+that operation can be used in that manner. If the $auto_tag variable is set,
+the next operation applies to the tagged messages automatically, without
+requiring the ?tag-prefix?.
+
+In macros or push commands, you can use the <tag-prefix-cond> operator. If
+there are no tagged messages, Mutt will ?eat? the rest of the macro to abort
+it's execution. Mutt will stop ?eating? the macro when it encounters the
+<end-cond> operator; after this operator the rest of the macro will be executed
+as normal.

 
 4. Using Hooks
 
 
 4. Using Hooks
 

-A hook is a concept borrowed from the EMACS editor which allows you to execute
+A hook is a concept found in many other programs which allows you to execute

 arbitrary commands before performing some operation. For example, you may wish
 to tailor your configuration based upon which mailbox you are reading, or to
 whom you are sending mail. In the Mutt world, a hook consists of a regular
 arbitrary commands before performing some operation. For example, you may wish
 to tailor your configuration based upon which mailbox you are reading, or to
 whom you are sending mail. In the Mutt world, a hook consists of a regular

-expression or pattern along with a configuration option/command. See
+expression or pattern along with a configuration option/command. See:
+
+  * account-hook
+
+  * charset-hook
+
+  * crypt-hook

 
 

-  ● folder-hook
+  * fcc-hook

 
 

-  ● send-hook
+  * fcc-save-hook

 
 

-  ● message-hook
+  * folder-hook

 
 

-  ● save-hook
+  * iconv-hook

 
 

-  ● mbox-hook
+  * mbox-hook

 
 

-  ● fcc-hook
+  * message-hook

 
 

-  ● fcc-save-hook
+  * reply-hook
+
+  * save-hook
+
+  * send-hook
+
+  * send2-hook

 
 for specific details on each type of hook available.
 
 
 for specific details on each type of hook available.
 

-Note: if a hook changes configuration settings, these changes remain effective
-until the end of the current mutt session. As this is generally not desired, a
-default hook needs to be added before all other hooks to restore configuration
-defaults. Here is an example with send-hook and the my_hdr directive:
+Note
+
+If a hook changes configuration settings, these changes remain effective until
+the end of the current Mutt session. As this is generally not desired, a
+?default? hook needs to be added before all other hooks of that type to restore
+configuration defaults.
+
+Example 4.3. Specifying a ?default? hook

 
 send-hook . 'unmy_hdr From:'
 send-hook ~C'^b@b\.b$' my_hdr from: c@c.c
 
 
 send-hook . 'unmy_hdr From:'
 send-hook ~C'^b@b\.b$' my_hdr from: c@c.c
 

+
+In Example 4.3, ?Specifying a default hook?, by default the value of $from and
+$realname is not overridden. When sending messages either To: or Cc: to
+<b@b.b>, the From: header is changed to <c@c.c>.
+

 4.1. Message Matching in Hooks
 
 Hooks that act upon messages (message-hook, reply-hook, send-hook, send2-hook,
 4.1. Message Matching in Hooks
 
 Hooks that act upon messages (message-hook, reply-hook, send-hook, send2-hook,


@@ -3254,7 +3878,7 @@ purposes you want to match different criteria.
 Mutt allows the use of the search pattern language for matching messages in
 hook commands. This works in exactly the same way as it would when limiting or
 searching the mailbox, except that you are restricted to those operators which
 Mutt allows the use of the search pattern language for matching messages in
 hook commands. This works in exactly the same way as it would when limiting or
 searching the mailbox, except that you are restricted to those operators which

-match information mutt extracts from the header of the message (i.e., from, to,
+match information Mutt extracts from the header of the message (i.e., from, to,

 cc, date, subject, etc.).
 
 For example, if you wanted to set your return address based upon sending mail
 cc, date, subject, etc.).
 
 For example, if you wanted to set your return address based upon sending mail


@@ -3274,7 +3898,7 @@ $default_hook that is in effect at that time will be used.
 5. External Address Queries
 
 Mutt supports connecting to external directory databases such as LDAP, ph/qi,
 5. External Address Queries
 
 Mutt supports connecting to external directory databases such as LDAP, ph/qi,

-bbdb, or NIS through a wrapper script which connects to mutt using a simple
+bbdb, or NIS through a wrapper script which connects to Mutt using a simple

 interface. Using the $query_command variable, you specify the wrapper command
 to use. For example:
 
 interface. Using the $query_command variable, you specify the wrapper command
 to use. For example:
 


@@ -3293,8 +3917,8 @@ me@cs.hmc.edu           Michael Elkins  mutt dude
 blong@fiction.net       Brandon Long    mutt and more
 roessler@does-not-exist.org        Thomas Roessler mutt pgp
 
 blong@fiction.net       Brandon Long    mutt and more
 roessler@does-not-exist.org        Thomas Roessler mutt pgp
 

-There are two mechanisms for accessing the query function of mutt. One is to do
-a query from the index menu using the query function (default: Q). This will
+There are two mechanisms for accessing the query function of Mutt. One is to do
+a query from the index menu using the <query> function (default: Q). This will

 prompt for a query, then bring up the query menu which will list the matching
 responses. From the query menu, you can select addresses to create aliases, or
 to mail. You can tag multiple addresses to mail, start a new query, or have a
 prompt for a query, then bring up the query menu which will list the matching
 responses. From the query menu, you can select addresses to create aliases, or
 to mail. You can tag multiple addresses to mail, start a new query, or have a


@@ -3302,68 +3926,90 @@ new query appended to the current responses.
 
 The other mechanism for accessing the query function is for address completion,
 similar to the alias completion. In any prompt for address entry, you can use
 
 The other mechanism for accessing the query function is for address completion,
 similar to the alias completion. In any prompt for address entry, you can use

-the complete-query function (default: ^T) to run a query based on the current
-address you have typed. Like aliases, mutt will look for what you have typed
+the <complete-query> function (default: ^T) to run a query based on the current
+address you have typed. Like aliases, Mutt will look for what you have typed

 back to the last space or comma. If there is a single response for that query,
 back to the last space or comma. If there is a single response for that query,

-mutt will expand the address in place. If there are multiple responses, mutt
+Mutt will expand the address in place. If there are multiple responses, Mutt

 will activate the query menu. At the query menu, you can select one or more
 addresses to be added to the prompt.
 
 6. Mailbox Formats
 
 will activate the query menu. At the query menu, you can select one or more
 addresses to be added to the prompt.
 
 6. Mailbox Formats
 

-Mutt supports reading and writing of four different mailbox formats: mbox,
-MMDF, MH and Maildir. The mailbox type is autodetected, so there is no need to
-use a flag for different mailbox types. When creating new mailboxes, Mutt uses
-the default specified with the $mbox_type variable.
+Mutt supports reading and writing of four different local mailbox formats:
+mbox, MMDF, MH and Maildir. The mailbox type is autodetected, so there is no
+need to use a flag for different mailbox types. When creating new mailboxes,
+Mutt uses the default specified with the $mbox_type variable. A short
+description of the formats follows.

 
 

-mbox. This is the most widely used mailbox format for UNIX. All messages are
-stored in a single file. Each message has a line of the form:
+mbox. This is a widely used mailbox format for UNIX. All messages are stored in
+a single file. Each message has a line of the form:

 
 From me@cs.hmc.edu Fri, 11 Apr 1997 11:44:56 PST
 
 
 From me@cs.hmc.edu Fri, 11 Apr 1997 11:44:56 PST
 

-to denote the start of a new message (this is often referred to as the
-``From_'' line).
+to denote the start of a new message (this is often referred to as the ?From_?
+line). The mbox format requires mailbox locking, is prone to mailbox corruption
+with concurrently writing clients or misinterpreted From_ lines. Depending on
+the environment, new mail detection can be unreliable. Mbox folders are fast to
+open and easy to archive.

 
 MMDF. This is a variant of the mbox format. Each message is surrounded by lines
 
 MMDF. This is a variant of the mbox format. Each message is surrounded by lines

-containing ``^A^A^A^A'' (four control-A's).
+containing ?^A^A^A^A? (four control-A's). The same problems as for mbox apply
+(also with finding the right message separator as four control-A's may appear
+in message bodies).

 
 MH. A radical departure from mbox and MMDF, a mailbox consists of a directory
 and each message is stored in a separate file. The filename indicates the
 message number (however, this is may not correspond to the message number Mutt
 
 MH. A radical departure from mbox and MMDF, a mailbox consists of a directory
 and each message is stored in a separate file. The filename indicates the
 message number (however, this is may not correspond to the message number Mutt

-displays). Deleted messages are renamed with a comma (,) prepended to the
-filename. Note: Mutt detects this type of mailbox by looking for either
-.mh_sequences or .xmhcache (needed to distinguish normal directories from MH
-mailboxes).
+displays). Deleted messages are renamed with a comma (?,?) prepended to the
+filename. Mutt detects this type of mailbox by looking for either .mh_sequences
+or .xmhcache files (needed to distinguish normal directories from MH
+mailboxes). MH is more robust with concurrent clients writing the mailbox, but
+still may suffer from lost flags; message corruption is less likely to occur
+than with mbox/mmdf. It's usually slower to open compared to mbox/mmdf since
+many small files have to be read (Mutt provides Section 7.1, ?Header Caching?
+to greatly speed this process up). Depending on the environment, MH is not very
+disk-space efficient.

 
 Maildir. The newest of the mailbox formats, used by the Qmail MTA (a
 replacement for sendmail). Similar to MH, except that it adds three
 subdirectories of the mailbox: tmp, new and cur. Filenames for the messages are
 chosen in such a way they are unique, even when two programs are writing the
 
 Maildir. The newest of the mailbox formats, used by the Qmail MTA (a
 replacement for sendmail). Similar to MH, except that it adds three
 subdirectories of the mailbox: tmp, new and cur. Filenames for the messages are
 chosen in such a way they are unique, even when two programs are writing the

-mailbox over NFS, which means that no file locking is needed.
+mailbox over NFS, which means that no file locking is needed and corruption is
+very unlikely. Maildir maybe slower to open without caching in Mutt, it too is
+not very disk-space efficient depending on the environment. Since no additional
+files are used for metadata (which is embedded in the message filenames) and
+Maildir is locking-free, it's easy to sync across different machines using
+file-level synchronization tools.

 
 7. Mailbox Shortcuts
 
 There are a number of built in shortcuts which refer to specific mailboxes.
 These shortcuts can be used anywhere you are prompted for a file or mailbox
 
 7. Mailbox Shortcuts
 
 There are a number of built in shortcuts which refer to specific mailboxes.
 These shortcuts can be used anywhere you are prompted for a file or mailbox

-path.
+path or in path-related configuration variables. Note that these only work at
+the beginning of a string.

 
 

-  ● ! -- refers to your $spoolfile (incoming) mailbox
+  * ! ? refers to your $spoolfile (incoming) mailbox

 
 

-  ● > -- refers to your $mbox file
+  * > ? refers to your $mbox file

 
 

-  ● < -- refers to your $record file
+  * < ? refers to your $record file

 
 

-  ● ^ -- refers to the current mailbox
+  * ^ ? refers to the current mailbox

 
 

-  ● - or !! -- refers to the file you've last visited
+  * - or !! ? refers to the file you've last visited

 
 

-  ● ~ -- refers to your home directory
+  * ? ? refers to your home directory

 
 

-  ● = or + -- refers to your $folder directory
+  * = or + ? refers to your $folder directory

 
 

-  ● @alias -- refers to the default save folder as determined by the address of
+  * @alias ? refers to the default save folder as determined by the address of

     the alias
 
     the alias
 

+For example, to store a copy of outgoing messages in the folder they were
+composed in, a folder-hook can be used to set $record:
+
+folder-hook . 'set record=^'
+

 8. Handling Mailing Lists
 
 Mutt has a few configuration options that make dealing with large amounts of
 8. Handling Mailing Lists
 
 Mutt has a few configuration options that make dealing with large amounts of


@@ -3371,60 +4017,62 @@ mail easier. The first thing you must do is to let Mutt know what addresses you
 consider to be mailing lists (technically this does not have to be a mailing
 list, but that is what it is most often used for), and what lists you are
 subscribed to. This is accomplished through the use of the lists and subscribe
 consider to be mailing lists (technically this does not have to be a mailing
 list, but that is what it is most often used for), and what lists you are
 subscribed to. This is accomplished through the use of the lists and subscribe

-commands in your muttrc.
+commands in your .muttrc.

 
 Now that Mutt knows what your mailing lists are, it can do several things, the
 first of which is the ability to show the name of a list through which you
 received a message (i.e., of a subscribed list) in the index menu display. This
 is useful to distinguish between personal and list mail in the same mailbox. In
 
 Now that Mutt knows what your mailing lists are, it can do several things, the
 first of which is the ability to show the name of a list through which you
 received a message (i.e., of a subscribed list) in the index menu display. This
 is useful to distinguish between personal and list mail in the same mailbox. In

-the $index_format variable, the escape ``%L'' will return the string ``To
-<list>'' when ``list'' appears in the ``To'' field, and ``Cc <list>'' when it
-appears in the ``Cc'' field (otherwise it returns the name of the author).
-
-Often times the ``To'' and ``Cc'' fields in mailing list messages tend to get
-quite large. Most people do not bother to remove the author of the message they
-are reply to from the list, resulting in two or more copies being sent to that
-person. The ``list-reply'' function, which by default is bound to ``L'' in the
-index menu and pager, helps reduce the clutter by only replying to the known
-mailing list addresses instead of all recipients (except as specified by
-Mail-Followup-To, see below).
+the $index_format variable, the expando ?%L? will print the string ?To <list>?
+when ?list? appears in the ?To? field, and ?Cc <list>? when it appears in the
+?Cc? field (otherwise it prints the name of the author).
+
+Often times the ?To? and ?Cc? fields in mailing list messages tend to get quite
+large. Most people do not bother to remove the author of the message they reply
+to from the list, resulting in two or more copies being sent to that person.
+The <list-reply> function, which by default is bound to ?L? in the index menu
+and pager, helps reduce the clutter by only replying to the known mailing list
+addresses instead of all recipients (except as specified by Mail-Followup-To,
+see below).

 
 Mutt also supports the Mail-Followup-To header. When you send a message to a
 list of recipients which includes one or several subscribed mailing lists, and
 
 Mutt also supports the Mail-Followup-To header. When you send a message to a
 list of recipients which includes one or several subscribed mailing lists, and

-if the $followup_to option is set, mutt will generate a Mail-Followup-To header
+if the $followup_to option is set, Mutt will generate a Mail-Followup-To header

 which contains all the recipients to whom you send this message, but not your
 address. This indicates that group-replies or list-replies (also known as
 which contains all the recipients to whom you send this message, but not your
 address. This indicates that group-replies or list-replies (also known as

-``followups'') to this message should only be sent to the original recipients
-of the message, and not separately to you - you'll receive your copy through
-one of the mailing lists you are subscribed to.
+?followups?) to this message should only be sent to the original recipients of
+the message, and not separately to you - you'll receive your copy through one
+of the mailing lists you are subscribed to.

 
 Conversely, when group-replying or list-replying to a message which has a
 
 Conversely, when group-replying or list-replying to a message which has a

-Mail-Followup-To header, mutt will respect this header if the
+Mail-Followup-To header, Mutt will respect this header if the

 $honor_followup_to configuration variable is set. Using list-reply will in this
 case also make sure that the reply goes to the mailing list, even if it's not
 specified in the list of recipients in the Mail-Followup-To.
 
 $honor_followup_to configuration variable is set. Using list-reply will in this
 case also make sure that the reply goes to the mailing list, even if it's not
 specified in the list of recipients in the Mail-Followup-To.
 

-Note that, when header editing is enabled, you can create a Mail-Followup-To
-header manually. Mutt will only auto-generate this header if it doesn't exist
-when you send the message.
-
-The other method some mailing list admins use is to generate a ``Reply-To''
-field which points back to the mailing list address rather than the author of
-the message. This can create problems when trying to reply directly to the
-author in private, since most mail clients will automatically reply to the
-address given in the ``Reply-To'' field. Mutt uses the $reply_to variable to
-help decide which address to use. If set to ask-yes or ask-no, you will be
-prompted as to whether or not you would like to use the address given in the
-``Reply-To'' field, or reply directly to the address given in the ``From''
-field. When set to yes, the ``Reply-To'' field will be used when present.
-
-The ``X-Label:'' header field can be used to further identify mailing lists or
+Note
+
+When header editing is enabled, you can create a Mail-Followup-To header
+manually. Mutt will only auto-generate this header if it doesn't exist when you
+send the message.
+
+The other method some mailing list admins use is to generate a ?Reply-To? field
+which points back to the mailing list address rather than the author of the
+message. This can create problems when trying to reply directly to the author
+in private, since most mail clients will automatically reply to the address
+given in the ?Reply-To? field. Mutt uses the $reply_to variable to help decide
+which address to use. If set to ask-yes or ask-no, you will be prompted as to
+whether or not you would like to use the address given in the ?Reply-To? field,
+or reply directly to the address given in the ?From? field. When set to yes,
+the ?Reply-To? field will be used when present.
+
+The ?X-Label:? header field can be used to further identify mailing lists or

 list subject matter (or just to annotate messages individually). The
 list subject matter (or just to annotate messages individually). The

-$index_format variable's ``%y'' and ``%Y'' escapes can be used to expand
-``X-Label:'' fields in the index, and Mutt's pattern-matcher can match regular
-expressions to ``X-Label:'' fields with the ``~y'' selector. ``X-Label:'' is
-not a standard message header field, but it can easily be inserted by procmail
-and other mail filtering agents.
+$index_format variable's ?%y? and ?%Y? expandos can be used to expand
+?X-Label:? fields in the index, and Mutt's pattern-matcher can match regular
+expressions to ?X-Label:? fields with the ??y? selector. ?X-Label:? is not a
+standard message header field, but it can easily be inserted by procmail and
+other mail filtering agents.

 
 Lastly, Mutt has the ability to sort the mailbox into threads. A thread is a
 group of messages which all relate to the same subject. This is usually
 
 Lastly, Mutt has the ability to sort the mailbox into threads. A thread is a
 group of messages which all relate to the same subject. This is usually


@@ -3434,38 +4082,66 @@ the same concept. It makes dealing with large volume mailing lists easier
 because you can easily delete uninteresting threads and quickly find topics of
 value.
 
 because you can easily delete uninteresting threads and quickly find topics of
 value.
 

-9. Editing threads
+9. Handling multiple folders
+
+Mutt supports setups with multiple folders, allowing all of them to be
+monitored for new mail (see Section 14, ?Monitoring Incoming Mail? for
+details).
+
+When in the index menu and being idle (also see $timeout), Mutt periodically
+checks for new mail in all folders which have been configured via the mailboxes
+command. The interval depends on the folder type: for local/IMAP folders it
+consults $mail_check and $pop_checkinterval for POP folders.
+
+Outside the index menu the directory browser supports checking for new mail
+using the <check-new> function which is unbound by default. Pressing TAB will
+bring up a menu showing the files specified by the mailboxes command, and
+indicate which contain new messages. Mutt will automatically enter this mode
+when invoked from the command line with the -y option.
+
+For the pager, index and directory browser menus, Mutt contains the
+<buffy-list> function (bound to ?.? by default) which will print a list of
+folders with new mail in the command line at the bottom of the screen.
+
+For the index, by default Mutt displays the number of mailboxes with new mail
+in the status bar, please refer to the $status_format variable for details.
+
+When changing folders, Mutt fills the prompt with the first folder from the
+mailboxes list containing new mail (if any), pressing space will cycle through
+folders with new mail.
+
+10. Editing Threads

 
 Mutt has the ability to dynamically restructure threads that are broken either
 by misconfigured software or bad behavior from some correspondents. This allows
 
 Mutt has the ability to dynamically restructure threads that are broken either
 by misconfigured software or bad behavior from some correspondents. This allows

-to clean your mailboxes formats) from these annoyances which make it hard to
-follow a discussion.
+to clean your mailboxes from these annoyances which make it hard to follow a
+discussion.

 
 

-9.1. Linking threads
+10.1. Linking Threads

 
 

-Some mailers tend to "forget" to correctly set the "In-Reply-To:" and
-"References:" headers when replying to a message. This results in broken
+Some mailers tend to ?forget? to correctly set the ?In-Reply-To:? and
+?References:? headers when replying to a message. This results in broken

 discussions because Mutt has not enough information to guess the correct
 threading. You can fix this by tagging the reply, then moving to the parent
 discussions because Mutt has not enough information to guess the correct
 threading. You can fix this by tagging the reply, then moving to the parent

-message and using the ``link-threads'' function (bound to & by default). The
-reply will then be connected to this "parent" message.
+message and using the <link-threads> function (bound to & by default). The
+reply will then be connected to this parent message.

 
 You can also connect multiple children at once, tagging them and using the
 
 You can also connect multiple children at once, tagging them and using the

-tag-prefix command (';') or the auto_tag option.
+<tag-prefix> command (';') or the $auto_tag option.

 
 

-9.2. Breaking threads
+10.2. Breaking Threads

 
 On mailing lists, some people are in the bad habit of starting a new discussion
 
 On mailing lists, some people are in the bad habit of starting a new discussion

-by hitting "reply" to any message from the list and changing the subject to a
-totally unrelated one. You can fix such threads by using the ``break-thread''
+by hitting ?reply? to any message from the list and changing the subject to a
+totally unrelated one. You can fix such threads by using the <break-thread>

 function (bound by default to #), which will turn the subthread starting from
 the current message into a whole different thread.
 
 function (bound by default to #), which will turn the subthread starting from
 the current message into a whole different thread.
 

-10. Delivery Status Notification (DSN) Support
+11. Delivery Status Notification (DSN) Support

 
 RFC1894 defines a set of MIME content types for relaying information about the
 
 RFC1894 defines a set of MIME content types for relaying information about the

-status of electronic mail messages. These can be thought of as ``return
-receipts.''
+status of electronic mail messages. These can be thought of as ?return
+receipts.?

 
 To support DSN, there are two variables. $dsn_notify is used to request
 receipts for different results (such as failed message, message delivered,
 
 To support DSN, there are two variables. $dsn_notify is used to request
 receipts for different results (such as failed message, message delivered,


@@ -3479,12 +4155,11 @@ make requests as to what type of status messages should be returned. Please
 consider your MTA documentation whether DSN is supported.
 
 For SMTP delivery using $smtp_url, it depends on the capabilities announced by
 consider your MTA documentation whether DSN is supported.
 
 For SMTP delivery using $smtp_url, it depends on the capabilities announced by

-the server whether mutt will attempt to request DSN or not.
+the server whether Mutt will attempt to request DSN or not.

 
 

-11. Start a WWW Browser on URLs (EXTERNAL)
+12. Start a WWW Browser on URLs

 
 

-If a message contains URLs (unified resource locator = address in the WWW space
-like http://www.mutt.org/), it is efficient to get a menu with all the URLs and
+If a message contains URLs, it is efficient to get a menu with all the URLs and

 start a WWW browser on one of them. This functionality is provided by the
 external urlview program which can be retrieved at ftp://ftp.mutt.org/mutt/
 contrib/ and the configuration commands:
 start a WWW browser on one of them. This functionality is provided by the
 external urlview program which can be retrieved at ftp://ftp.mutt.org/mutt/
 contrib/ and the configuration commands:


@@ -3492,23 +4167,46 @@ contrib/ and the configuration commands:
 macro index \cb |urlview\n
 macro pager \cb |urlview\n
 
 macro index \cb |urlview\n
 macro pager \cb |urlview\n
 

+13. Miscellany
+
+This section documents various features that fit nowhere else.
+
+Address normalization
+
+    Mutt normalizes all e-mail addresses to the simplest form possible. If an
+    address contains a realname, the form Joe User <joe@example.com> is used
+    and the pure e-mail address without angle brackets otherwise, i.e. just
+    joe@example.com.
+
+    This normalization affects all headers Mutt generates including aliases.
+
+Initial folder selection
+
+    The folder Mutt opens at startup is determined as follows: the folder
+    specified in the $MAIL environment variable if present. Otherwise, the
+    value of $MAILDIR is taken into account. If that isn't present either, Mutt
+    takes the user's mailbox in the mailspool as determined at compile-time
+    (which may also reside in the home directory). The $spoolfile setting
+    overrides this selection. Highest priority has the mailbox given with the
+    -f command line option.
+

 Chapter 5. Mutt's MIME Support
 
 Table of Contents
 
 1. Using MIME in Mutt
 
 Chapter 5. Mutt's MIME Support
 
 Table of Contents
 
 1. Using MIME in Mutt
 

-    1.1. Viewing MIME messages in the pager
+    1.1. Viewing MIME Messages in the Pager

     1.2. The Attachment Menu
     1.3. The Compose Menu
 
     1.2. The Attachment Menu
     1.3. The Compose Menu
 

-2. MIME Type configuration with mime.types
-3. MIME Viewer configuration with mailcap
+2. MIME Type Configuration with mime.types
+3. MIME Viewer Configuration with Mailcap

 
 

-    3.1. The Basics of the mailcap file
-    3.2. Secure use of mailcap
-    3.3. Advanced mailcap Usage
-    3.4. Example mailcap files
+    3.1. The Basics of the Mailcap File
+    3.2. Secure Use of Mailcap
+    3.3. Advanced Mailcap Usage
+    3.4. Example Mailcap Files

 
 4. MIME Autoview
 5. MIME Multipart/Alternative
 
 4. MIME Autoview
 5. MIME Multipart/Alternative


@@ -3529,7 +4227,7 @@ types.
 There are three areas/menus in Mutt which deal with MIME, they are the pager
 (while viewing a message), the attachment menu and the compose menu.
 
 There are three areas/menus in Mutt which deal with MIME, they are the pager
 (while viewing a message), the attachment menu and the compose menu.
 

-1.1. Viewing MIME messages in the pager
+1.1. Viewing MIME Messages in the Pager

 
 When you select a message from the index and view it in the pager, Mutt decodes
 the message to a text representation. Mutt internally supports a number of MIME
 
 When you select a message from the index and view it in the pager, Mutt decodes
 the message to a text representation. Mutt internally supports a number of MIME


@@ -3552,17 +4250,19 @@ If Mutt cannot deal with a MIME type, it will display a message like:
 
 1.2. The Attachment Menu
 
 
 1.2. The Attachment Menu
 

-The default binding for view-attachments is `v', which displays the attachment
-menu for a message. The attachment menu displays a list of the attachments in a
-message. From the attachment menu, you can save, print, pipe, delete, and view
-attachments. You can apply these operations to a group of attachments at once,
-by tagging the attachments and by using the ``tag-prefix'' operator. You can
-also reply to the current message from this menu, and only the current
-attachment (or the attachments tagged) will be quoted in your reply. You can
-view attachments as text, or view them using the mailcap viewer definition.
+The default binding for <view-attachments> is ?v?, which displays the
+attachment menu for a message. The attachment menu displays a list of the
+attachments in a message. From the attachment menu, you can save, print, pipe,
+delete, and view attachments. You can apply these operations to a group of
+attachments at once, by tagging the attachments and by using the <tag-prefix>
+operator. You can also reply to the current message from this menu, and only
+the current attachment (or the attachments tagged) will be quoted in your
+reply. You can view attachments as text, or view them using the mailcap viewer
+definition.

 
 

-Finally, you can apply the usual message-related functions (like resend-message
-, and the reply and forward functions) to attachments of type message/rfc822.
+Finally, you can apply the usual message-related functions (like
+<resend-message>, and the <reply> and <forward> functions) to attachments of
+type message/rfc822.

 
 See the help on the attachment menu for more information.
 
 
 See the help on the attachment menu for more information.
 


@@ -3582,17 +4282,18 @@ Attachments appear as follows:
   2 [applica/x-gunzip, base64, 422K] ~/src/mutt-0.85.tar.gz <no description>
 
 The '-' denotes that Mutt will delete the file after sending (or postponing, or
   2 [applica/x-gunzip, base64, 422K] ~/src/mutt-0.85.tar.gz <no description>
 
 The '-' denotes that Mutt will delete the file after sending (or postponing, or

-canceling) the message. It can be toggled with the toggle-unlink command
+canceling) the message. It can be toggled with the <toggle-unlink> command

 (default: u). The next field is the MIME content-type, and can be changed with
 (default: u). The next field is the MIME content-type, and can be changed with

-the edit-type command (default: ^T). The next field is the encoding for the
+the <edit-type> command (default: ^T). The next field is the encoding for the

 attachment, which allows a binary message to be encoded for transmission on
 attachment, which allows a binary message to be encoded for transmission on

-7bit links. It can be changed with the edit-encoding command (default: ^E). The
-next field is the size of the attachment, rounded to kilobytes or megabytes.
-The next field is the filename, which can be changed with the rename-file
-command (default: R). The final field is the description of the attachment, and
-can be changed with the edit-description command (default: d).
+7bit links. It can be changed with the <edit-encoding> command (default: ^E).
+The next field is the size of the attachment, rounded to kilobytes or
+megabytes. The next field is the filename, which can be changed with the
+<rename-file> command (default: R). The final field is the description of the
+attachment, and can be changed with the <edit-description> command (default:
+d).

 
 

-2. MIME Type configuration with mime.types
+2. MIME Type Configuration with mime.types

 
 When you add an attachment to your mail message, Mutt searches your personal
 mime.types file at ${HOME}/.mime.types, and then the system mime.types file at
 
 When you add an attachment to your mail message, Mutt searches your personal
 mime.types file at ${HOME}/.mime.types, and then the system mime.types file at


@@ -3613,7 +4314,7 @@ attach, it will look at the file. If the file is free of binary information,
 Mutt will assume that the file is plain text, and mark it as text/plain. If the
 file contains binary information, then Mutt will mark it as application/
 octet-stream. You can change the MIME type that Mutt assigns to an attachment
 Mutt will assume that the file is plain text, and mark it as text/plain. If the
 file contains binary information, then Mutt will mark it as application/
 octet-stream. You can change the MIME type that Mutt assigns to an attachment

-by using the edit-type command from the compose menu (default: ^T). The MIME
+by using the <edit-type> command from the compose menu (default: ^T). The MIME

 type is actually a major mime type followed by the sub-type, separated by a '/
 '. 6 major types: application, text, image, video, audio, and model have been
 approved after various internet discussions. Mutt recognizes all of these if
 type is actually a major mime type followed by the sub-type, separated by a '/
 '. 6 major types: application, text, image, video, audio, and model have been
 approved after various internet discussions. Mutt recognizes all of these if


@@ -3623,14 +4324,14 @@ molecular modeling community to pass molecular data in various forms to various
 molecular viewers. Non-recognized mime types should only be used if the
 recipient of the message is likely to be expecting such attachments.
 
 molecular viewers. Non-recognized mime types should only be used if the
 recipient of the message is likely to be expecting such attachments.
 

-3. MIME Viewer configuration with mailcap
+3. MIME Viewer Configuration with Mailcap

 
 Mutt supports RFC 1524 MIME Configuration, in particular the Unix specific
 format specified in Appendix A of RFC 1524. This file format is commonly
 referred to as the mailcap format. Many MIME compliant programs utilize the
 mailcap format, allowing you to specify handling for all MIME types in one
 
 Mutt supports RFC 1524 MIME Configuration, in particular the Unix specific
 format specified in Appendix A of RFC 1524. This file format is commonly
 referred to as the mailcap format. Many MIME compliant programs utilize the
 mailcap format, allowing you to specify handling for all MIME types in one

-place for all programs. Programs known to use this format include Netscape,
-XMosaic, lynx and metamail.
+place for all programs. Programs known to use this format include Firefox, lynx
+and metamail.

 
 In order to handle various MIME types that Mutt can not handle internally, Mutt
 parses a series of external configuration files to find an external handler.
 
 In order to handle various MIME types that Mutt can not handle internally, Mutt
 parses a series of external configuration files to find an external handler.


@@ -3650,7 +4351,7 @@ the following files:
  6. /usr/local/etc/mailcap
 
 where $HOME is your home directory. The $PKGDATADIR and the $SYSCONFDIR
  6. /usr/local/etc/mailcap
 
 where $HOME is your home directory. The $PKGDATADIR and the $SYSCONFDIR

-directories depend on where mutt is installed: the former is the default for
+directories depend on where Mutt is installed: the former is the default for

 shared data, the latter for system configuration files.
 
 The default search path can be obtained by running the following command:
 shared data, the latter for system configuration files.
 
 The default search path can be obtained by running the following command:


@@ -3660,7 +4361,7 @@ mutt -nF /dev/null -Q mailcap_path
 In particular, the metamail distribution will install a mailcap file, usually
 as /usr/local/etc/mailcap, which contains some baseline entries.
 
 In particular, the metamail distribution will install a mailcap file, usually
 as /usr/local/etc/mailcap, which contains some baseline entries.
 

-3.1. The Basics of the mailcap file
+3.1. The Basics of the Mailcap File

 
 A mailcap file consists of a series of lines which are comments, blank, or
 definitions.
 
 A mailcap file consists of a series of lines which are comments, blank, or
 definitions.


@@ -3702,10 +4403,13 @@ Perhaps you would like to use lynx to interactively view a text/html message:
 text/html; lynx %s
 
 In this case, lynx does not support viewing a file from stdin, so you must use
 text/html; lynx %s
 
 In this case, lynx does not support viewing a file from stdin, so you must use

-the %s syntax. Note:Some older versions of lynx contain a bug where they will
-check the mailcap file for a viewer for text/html. They will find the line
-which calls lynx, and run it. This causes lynx to continuously spawn itself to
-view the object.
+the %s syntax.
+
+Note
+
+Some older versions of lynx contain a bug where they will check the mailcap
+file for a viewer for text/html. They will find the line which calls lynx, and
+run it. This causes lynx to continuously spawn itself to view the object.

 
 On the other hand, maybe you don't want to use lynx interactively, you just
 want to have it convert the text/html to text/plain, then you can use:
 
 On the other hand, maybe you don't want to use lynx interactively, you just
 want to have it convert the text/html to text/plain, then you can use:


@@ -3720,14 +4424,14 @@ text/*; more
 
 This is the simplest form of a mailcap file.
 
 
 This is the simplest form of a mailcap file.
 

-3.2. Secure use of mailcap
+3.2. Secure Use of Mailcap

 
 The interpretation of shell meta-characters embedded in MIME parameters can
 lead to security problems in general. Mutt tries to quote parameters in
 expansion of %s syntaxes properly, and avoids risky characters by substituting
 them, see the $mailcap_sanitize variable.
 
 
 The interpretation of shell meta-characters embedded in MIME parameters can
 lead to security problems in general. Mutt tries to quote parameters in
 expansion of %s syntaxes properly, and avoids risky characters by substituting
 them, see the $mailcap_sanitize variable.
 

-Although mutt's procedures to invoke programs with mailcap seem to be safe,
+Although Mutt's procedures to invoke programs with mailcap seem to be safe,

 there are other applications parsing mailcap, maybe taking less care of it.
 Therefore you should pay attention to the following rules:
 
 there are other applications parsing mailcap, maybe taking less care of it.
 Therefore you should pay attention to the following rules:
 


@@ -3747,7 +4451,7 @@ further expansion):
 text/test-mailcap-bug; cat %s; copiousoutput; test=charset=%{charset} \
         && test "`echo $charset | tr '[A-Z]' '[a-z]'`" != iso-8859-1
 
 text/test-mailcap-bug; cat %s; copiousoutput; test=charset=%{charset} \
         && test "`echo $charset | tr '[A-Z]' '[a-z]'`" != iso-8859-1
 

-3.3. Advanced mailcap Usage
+3.3. Advanced Mailcap Usage

 
 3.3.1. Optional Fields
 
 
 3.3.1. Optional Fields
 


@@ -3788,7 +4492,7 @@ composetyped=<command>
 
     This flag specifies the command to use to create a new attachment of a
     specific MIME type. This command differs from the compose command in that
 
     This flag specifies the command to use to create a new attachment of a
     specific MIME type. This command differs from the compose command in that

-    mutt will expect standard MIME headers on the data. This can be used to
+    Mutt will expect standard MIME headers on the data. This can be used to

     specify parameters, filename, description, etc. for a new attachment. Mutt
     supports this from the compose menu.
 
     specify parameters, filename, description, etc. for a new attachment. Mutt
     supports this from the compose menu.
 


@@ -3819,15 +4523,15 @@ test=<command>
     should be used. The command is defined with the command expansion rules
     defined in the next section. If the command returns 0, then the test
     passed, and Mutt uses this entry. If the command returns non-zero, then the
     should be used. The command is defined with the command expansion rules
     defined in the next section. If the command returns 0, then the test
     passed, and Mutt uses this entry. If the command returns non-zero, then the

-    test failed, and Mutt continues searching for the right entry. Note:the
-    content-type must match before Mutt performs the test. For example:
+    test failed, and Mutt continues searching for the right entry. Note that
+    the content-type must match before Mutt performs the test. For example:

 
 

-    text/html; netscape -remote 'openURL(%s)' ; test=RunningX
+    text/html; firefox -remote 'openURL(%s)' ; test=RunningX

     text/html; lynx %s
 
     In this example, Mutt will run the program RunningX which will return 0 if
     the X Window manager is running, and non-zero if it isn't. If RunningX
     text/html; lynx %s
 
     In this example, Mutt will run the program RunningX which will return 0 if
     the X Window manager is running, and non-zero if it isn't. If RunningX

-    returns 0, then Mutt will call netscape to display the text/html object. If
+    returns 0, then Mutt will call firefox to display the text/html object. If

     RunningX doesn't return 0, then Mutt will go on to the next entry and use
     lynx to display the text/html object.
 
     RunningX doesn't return 0, then Mutt will go on to the next entry and use
     lynx to display the text/html object.
 


@@ -3851,7 +4555,7 @@ interactively from the attachment menu. In addition, you can then use the test
 feature to determine which viewer to use interactively depending on your
 environment.
 
 feature to determine which viewer to use interactively depending on your
 environment.
 

-text/html;      netscape -remote 'openURL(%s)' ; test=RunningX
+text/html;      firefox -remote 'openURL(%s)' ; test=RunningX

 text/html;      lynx %s; nametemplate=%s.html
 text/html;      lynx -dump %s; nametemplate=%s.html; copiousoutput
 
 text/html;      lynx %s; nametemplate=%s.html
 text/html;      lynx -dump %s; nametemplate=%s.html; copiousoutput
 


@@ -3863,7 +4567,7 @@ use the second entry for interactive viewing.
 3.3.3. Command Expansion
 
 The various commands defined in the mailcap files are passed to the /bin/sh
 3.3.3. Command Expansion
 
 The various commands defined in the mailcap files are passed to the /bin/sh

-shell using the system() function. Before the command is passed to /bin/sh -c,
+shell using the system(3) function. Before the command is passed to /bin/sh -c,

 it is parsed to expand various special parameters with information from Mutt.
 The keywords Mutt expands are:
 
 it is parsed to expand various special parameters with information from Mutt.
 The keywords Mutt expands are:
 


@@ -3902,7 +4606,7 @@ Mutt does not currently support the %F and %n keywords specified in RFC 1524.
 The main purpose of these parameters is for multipart messages, which is
 handled internally by Mutt.
 
 The main purpose of these parameters is for multipart messages, which is
 handled internally by Mutt.
 

-3.4. Example mailcap files
+3.4. Example Mailcap Files

 
 This mailcap file is fairly simple and standard:
 
 
 This mailcap file is fairly simple and standard:
 


@@ -3910,8 +4614,8 @@ This mailcap file is fairly simple and standard:
 video/*;        xanim %s > /dev/null
 image/*;        xv %s > /dev/null
 
 video/*;        xanim %s > /dev/null
 image/*;        xv %s > /dev/null
 

-# I'm always running netscape (if my computer had more memory, maybe)
-text/html;      netscape -remote 'openURL(%s)'
+# I'm always running firefox (if my computer had more memory, maybe)
+text/html;      firefox -remote 'openURL(%s)'

 
 This mailcap file shows quite a number of examples:
 
 
 This mailcap file shows quite a number of examples:
 


@@ -3919,12 +4623,12 @@ This mailcap file shows quite a number of examples:
 # send that to /dev/null so I don't see it
 video/*;        xanim %s > /dev/null
 
 # send that to /dev/null so I don't see it
 video/*;        xanim %s > /dev/null
 

-# Send html to a running netscape by remote
-text/html;      netscape -remote 'openURL(%s)'; test=RunningNetscape
+# Send html to a running firefox by remote
+text/html;      firefox -remote 'openURL(%s)'; test=RunningFirefox

 
 

-# If I'm not running netscape but I am running X, start netscape on the
+# If I'm not running firefox but I am running X, start firefox on the

 # object
 # object

-text/html;      netscape %s; test=RunningX
+text/html;      firefox %s; test=RunningX

 
 # Else use lynx to view it as text
 text/html;      lynx %s
 
 # Else use lynx to view it as text
 text/html;      lynx %s


@@ -3935,7 +4639,7 @@ text/html;      lynx -dump %s; copiousoutput
 # I use enscript to print text in two columns to a page
 text/*;         more %s; print=enscript -2Gr %s
 
 # I use enscript to print text in two columns to a page
 text/*;         more %s; print=enscript -2Gr %s
 

-# Netscape adds a flag to tell itself to view jpegs internally
+# Firefox adds a flag to tell itself to view jpegs internally

 image/jpeg;xv %s; x-mozilla-flags=internal
 
 # Use xv to view images if I'm running X
 image/jpeg;xv %s; x-mozilla-flags=internal
 
 # Use xv to view images if I'm running X


@@ -3953,6 +4657,11 @@ application/ms-excel; open.pl %s
 
 4. MIME Autoview
 
 
 4. MIME Autoview
 

+Usage:
+
+auto-view mimetype [ mimetype ...]
+unauto-view { * | mimetype ... }
+

 In addition to explicitly telling Mutt to view an attachment with the MIME
 viewer defined in the mailcap file, Mutt has support for automatically viewing
 MIME attachments while in the pager.
 In addition to explicitly telling Mutt to view an attachment with the MIME
 viewer defined in the mailcap file, Mutt has support for automatically viewing
 MIME attachments while in the pager.


@@ -3962,10 +4671,8 @@ copiousoutput option to denote that it is non-interactive. Usually, you also
 use the entry to convert the attachment to a text representation which you can
 view in the pager.
 
 use the entry to convert the attachment to a text representation which you can
 view in the pager.
 

-You then use the auto_view muttrc command to list the content-types that you
-wish to view automatically.
-
-For instance, if you set auto_view to:
+You then use the auto_view .muttrc command to list the content-types that you
+wish to view automatically. For instance, if you set it to:

 
 auto_view text/html application/x-gunzip \
   application/postscript image/gif application/x-tar-gz
 
 auto_view text/html application/x-gunzip \
   application/postscript image/gif application/x-tar-gz


@@ -3980,22 +4687,22 @@ application/x-gunzip;   gzcat; copiousoutput
 application/x-tar-gz; gunzip -c %s | tar -tf - ; copiousoutput
 application/postscript; ps2ascii %s; copiousoutput
 
 application/x-tar-gz; gunzip -c %s | tar -tf - ; copiousoutput
 application/postscript; ps2ascii %s; copiousoutput
 

-``unauto_view'' can be used to remove previous entries from the autoview list.
-This can be used with message-hook to autoview messages based on size, etc.
-``unauto_view *'' will remove all previous entries.
+unauto_view can be used to remove previous entries from the autoview list. This
+can be used with message-hook to autoview messages based on size, etc. ?
+unauto_view *? will remove all previous entries.

 
 5. MIME Multipart/Alternative
 
 Mutt has some heuristics for determining which attachment of a multipart/
 
 5. MIME Multipart/Alternative
 
 Mutt has some heuristics for determining which attachment of a multipart/

-alternative type to display. First, mutt will check the alternative_order list
-to determine if one of the available types is preferred. The alternative_order
-list consists of a number of mimetypes in order, including support for implicit
-and explicit wildcards, for example:
+alternative type to display. First, Mutt will check the alternative_order list
+to determine if one of the available types is preferred. It consists of a
+number of mimetypes in order, including support for implicit and explicit
+wildcards, for example:

 
 alternative_order text/enriched text/plain text application/postscript image/*
 
 
 alternative_order text/enriched text/plain text application/postscript image/*
 

-Next, mutt will check if any of the types have a defined auto_view, and use
-that. Failing that, Mutt will look for any text type. As a last attempt, mutt
+Next, Mutt will check if any of the types have a defined auto_view, and use
+that. Failing that, Mutt will look for any text type. As a last attempt, Mutt

 will look for any type it knows how to handle.
 
 To remove a MIME type from the alternative_order list, use the
 will look for any type it knows how to handle.
 
 To remove a MIME type from the alternative_order list, use the


@@ -4010,42 +4717,44 @@ search for messages by attachment count. You also can configure what kinds of
 attachments qualify for this feature with the attachments and unattachments
 commands.
 
 attachments qualify for this feature with the attachments and unattachments
 commands.
 

-In order to provide this information, mutt needs to fully MIME-parse all
+In order to provide this information, Mutt needs to fully MIME-parse all

 messages affected first. This can slow down operation especially for remote
 mail folders such as IMAP because all messages have to be downloaded first
 regardless whether the user really wants to view them or not.
 
 The syntax is:
 
 messages affected first. This can slow down operation especially for remote
 mail folders such as IMAP because all messages have to be downloaded first
 regardless whether the user really wants to view them or not.
 
 The syntax is:
 

-attachments   {+|-}disposition mime-type
-unattachments {+|-}disposition mime-type
-attachments   ?
+attachments { + | - }disposition mime-type
+unattachments { + | - }disposition mime-type
+attachments ?

 
 

-Disposition is the attachment's Content-disposition type -- either "inline" or
-"attachment". You can abbreviate this to I or A.
+disposition is the attachment's Content-Disposition type ? either inline or
+attachment. You can abbreviate this to I or A.

 
 

-Disposition is prefixed by either a + symbolor a - symbol. If it's a +, you're
+Disposition is prefixed by either a + symbol or a - symbol. If it's a +, you're

 saying that you want to allow this disposition and MIME type to qualify. If
 it's a -, you're saying that this disposition and MIME type is an exception to
 previous + rules. There are examples below of how this is useful.
 
 saying that you want to allow this disposition and MIME type to qualify. If
 it's a -, you're saying that this disposition and MIME type is an exception to
 previous + rules. There are examples below of how this is useful.
 

-Mime-type is, unsurprisingly, the MIME type of the attachment you want to
-affect. A MIME type is always of the format "major/minor", where "major"
-describes the broad category of document you're looking at, and "minor"
-describes the specific type within that category. The major part of mim-type
-must be literal text (or the special token "*"), but the minor part may be a
-regular expression. (Therefore, "*/.*" matches any MIME type.)
+mime-type is, unsurprisingly, the MIME type of the attachment you want to
+affect. A MIME type is always of the format major/minor, where major describes
+the broad category of document you're looking at, and minor describes the
+specific type within that category. The major part of mime-type must be literal
+text (or the special token ?*?), but the minor part may be a regular
+expression. (Therefore, ?*/.*? matches any MIME type.)

 
 The MIME types you give to the attachments directive are a kind of pattern.
 When you use the attachments directive, the patterns you specify are added to a
 list. When you use unattachments, the pattern is removed from the list. The
 
 The MIME types you give to the attachments directive are a kind of pattern.
 When you use the attachments directive, the patterns you specify are added to a
 list. When you use unattachments, the pattern is removed from the list. The

-patterns are not expanded and matched to specific MIME types at this time --
+patterns are not expanded and matched to specific MIME types at this time ?

 they're just text in a list. They're only matched when actually evaluating a
 message.
 
 Some examples might help to illustrate. The examples that are not commented out
 define the default configuration of the lists.
 
 they're just text in a list. They're only matched when actually evaluating a
 message.
 
 Some examples might help to illustrate. The examples that are not commented out
 define the default configuration of the lists.
 

+Example 5.1. Attachment counting
+

 ## Removing a pattern from a list removes that pattern literally. It
 ## does not remove any type matching the pattern.
 ##
 ## Removing a pattern from a list removes that pattern literally. It
 ## does not remove any type matching the pattern.
 ##


@@ -4093,11 +4802,17 @@ attachments   +I text/plain
 attachments   -A message/external-body
 attachments   -I message/external-body
 
 attachments   -A message/external-body
 attachments   -I message/external-body
 

-"attachments ?" will list your current settings in Muttrc format, so that it
-can be pasted elsewhere.
+
+Entering the command ?attachments ?? as a command will list your current
+settings in Muttrc format, so that it can be pasted elsewhere.

 
 7. MIME Lookup
 
 
 7. MIME Lookup
 

+Usage:
+
+mime-lookup mimetype [ mimetype ...]
+unmime-lookup { * | mimetype ... }
+

 Mutt's mime_lookup list specifies a list of mime-types that should not be
 treated according to their mailcap entry. This option is designed to deal with
 binary types such as application/octet-stream. When an attachment's mime-type
 Mutt's mime_lookup list specifies a list of mime-types that should not be
 treated according to their mailcap entry. This option is designed to deal with
 binary types such as application/octet-stream. When an attachment's mime-type


@@ -4110,106 +4825,120 @@ rules in the mailcap file and according to any other configuration options
 mime_lookup application/octet-stream application/X-Lotus-Manuscript
 
 In addition, the unmime_lookup command may be used to disable this feature for
 mime_lookup application/octet-stream application/X-Lotus-Manuscript
 
 In addition, the unmime_lookup command may be used to disable this feature for

-any particular mime-type if it had been set, for example, in a global muttrc.
+any particular mime-type if it had been set, for example, in a global .muttrc.

 
 

-Chapter 6. Optional features
+Chapter 6. Optional Features

 
 Table of Contents
 
 
 Table of Contents
 

-1. General notes
+1. General Notes

 
 

-    1.1. Enabling/disabling features
-    1.2. URL syntax
+    1.1. Enabling/Disabling Features
+    1.2. URL Syntax

 
 2. SSL/TLS Support
 3. POP3 Support
 4. IMAP Support
 
 
 2. SSL/TLS Support
 3. POP3 Support
 4. IMAP Support
 

-    4.1. The Folder Browser
+    4.1. The IMAP Folder Browser

     4.2. Authentication
 
 5. SMTP Support
     4.2. Authentication
 
 5. SMTP Support

-6. Managing multiple accounts
-7. Local caching
+6. Managing Multiple Accounts
+7. Local Caching

 
 

-    7.1. Header caching
-    7.2. Body caching
+    7.1. Header Caching
+    7.2. Body Caching

     7.3. Maintenance
 
     7.3. Maintenance
 

-8. Exact address generation
+8. Exact Address Generation
+9. Sending Anonymous Messages via Mixmaster

 
 

-1. General notes
+1. General Notes

 
 

-1.1. Enabling/disabling features
+1.1. Enabling/Disabling Features

 
 Mutt supports several of optional features which can be enabled or disabled at
 compile-time by giving the configure script certain arguments. These are listed
 
 Mutt supports several of optional features which can be enabled or disabled at
 compile-time by giving the configure script certain arguments. These are listed

-in the ``Optional features'' section of the configure --help output.
+in the ?Optional features? section of the configure --help output.

 
 Which features are enabled or disabled can later be determined from the output
 
 Which features are enabled or disabled can later be determined from the output

-of mutt -v. If a compile option starts with ``+'' it is enabled and disabled if
-prefixed with ``-''. For example, if mutt was compiled using GnuTLS for
-encrypted communication instead of OpenSSL, mutt -v would contain:
+of mutt -v. If a compile option starts with ?+? it is enabled and disabled if
+prefixed with ?-?. For example, if Mutt was compiled using GnuTLS for encrypted
+communication instead of OpenSSL, mutt -v would contain:

 
 -USE_SSL_OPENSSL +USE_SSL_GNUTLS
 
 
 -USE_SSL_OPENSSL +USE_SSL_GNUTLS
 

-1.2. URL syntax
+1.2. URL Syntax

 
 Mutt optionally supports the IMAP, POP3 and SMTP protocols which require to
 
 Mutt optionally supports the IMAP, POP3 and SMTP protocols which require to

-access servers using URLs. The canonical syntax for specifying URLs in mutt is
+access servers using URLs. The canonical syntax for specifying URLs in Mutt is

 (an item enclosed in [] means it is optional and may be omitted):
 
 proto[s]://[username[:password]@]server[:port]/[path]
 
 proto is the communication protocol: imap for IMAP, pop for POP3 and smtp for
 (an item enclosed in [] means it is optional and may be omitted):
 
 proto[s]://[username[:password]@]server[:port]/[path]
 
 proto is the communication protocol: imap for IMAP, pop for POP3 and smtp for

-SMTP. If ``s'' for ``secure communication'' is appended, mutt will attempt to
-establish an encrypted communication using SSL or TLS. If no explicit port is
-given, mutt will use the system's default for the given protocol.
+SMTP. If ?s? for ?secure communication? is appended, Mutt will attempt to
+establish an encrypted communication using SSL or TLS.
+
+Since all protocols supported by Mutt support/require authentication, login
+credentials may be specified in the URL. This has the advantage that multiple
+IMAP, POP3 or SMTP servers may be specified (which isn't possible using, for
+example, $imap_user). The username may contain the ?@? symbol being used by
+many mail systems as part of the login name. A password can be given, too but
+is not recommended if the URL is specified in a configuration file on disk.

 
 

-Since all protocols by mutt support authentication, the username may be given
-directly in the URL instead of using the pop_user or imap_user variables. A
-password can be given, too but is not recommended if the URL is specified in a
-configuration file on disk.
+If no port number is given, Mutt will use the system's default for the given
+protocol (usually consulting /etc/services).

 
 The optional path is only relevant for IMAP.
 
 
 The optional path is only relevant for IMAP.
 

-For IMAP for example, you can select an alternative port by specifying it with
-the server: imap://imapserver:port/INBOX. You can also specify different
-username for each folder: imap://username@imapserver[:port]/INBOX or imap://
-username2@imapserver[:port]/path/to/folder. Replacing imap:// by imaps:// would
-make mutt attempt to conect using SSL or TLS on a different port to encrypt the
-communication.
+Example 6.1. URLs
+
+pops://host/
+imaps://user@host/INBOX/Sent
+smtp://user@host:587/
+

 
 2. SSL/TLS Support
 
 
 2. SSL/TLS Support
 

-If mutt is compiled with IMAP, POP3 and/or SMTP support, it can also be
+If Mutt is compiled with IMAP, POP3 and/or SMTP support, it can also be

 compiled with support for SSL or TLS using either OpenSSL or GnuTLS ( by
 running the configure script with the --enable-ssl=... option for OpenSSL or
 --enable-gnutls=... for GnuTLS). Mutt can then attempt to encrypt communication
 compiled with support for SSL or TLS using either OpenSSL or GnuTLS ( by
 running the configure script with the --enable-ssl=... option for OpenSSL or
 --enable-gnutls=... for GnuTLS). Mutt can then attempt to encrypt communication

-with remote servers if these protocols are suffixed with ``s'' for ``secure
-communication''.
+with remote servers if these protocols are suffixed with ?s? for ?secure
+communication?.

 
 3. POP3 Support
 
 
 3. POP3 Support
 

-If Mutt was compiled with POP3 support (by running the configure script with
-the --enable-pop flag), it has the ability to work with mailboxes located on a
+If Mutt is compiled with POP3 support (by running the configure script with the
+--enable-pop flag), it has the ability to work with mailboxes located on a

 remote POP3 server and fetch mail for local browsing.
 
 Remote POP3 servers can be accessed using URLs with the pop protocol for
 remote POP3 server and fetch mail for local browsing.
 
 Remote POP3 servers can be accessed using URLs with the pop protocol for

-unencrypted and pops for encrypted communication, see Section 1.2, "URL syntax"
+unencrypted and pops for encrypted communication, see Section 1.2, ?URL Syntax?

 for details.
 
 Polling for new mail is more expensive over POP3 than locally. For this reason
 the frequency at which Mutt will check for mail remotely can be controlled by
 the $pop_checkinterval variable, which defaults to every 60 seconds.
 
 for details.
 
 Polling for new mail is more expensive over POP3 than locally. For this reason
 the frequency at which Mutt will check for mail remotely can be controlled by
 the $pop_checkinterval variable, which defaults to every 60 seconds.
 

-Another way to access your POP3 mail is the fetch-mail function (default: G).
+POP is read-only which doesn't allow for some features like editing messages or
+changing flags. However, using Section 7.1, ?Header Caching? and Section 7.2,
+?Body Caching? Mutt simulates the new/old/read flags as well as flagged and
+replied. Mutt applies some logic on top of remote messages but cannot change
+them so that modifications of flags are lost when messages are downloaded from
+the POP server (either by Mutt or other tools).
+
+Another way to access your POP3 mail is the <fetch-mail> function (default: G).

 It allows to connect to $pop_host, fetch all your new mail and place it in the
 local $spoolfile. After this point, Mutt runs exactly as if the mail had always
 been local.
 
 It allows to connect to $pop_host, fetch all your new mail and place it in the
 local $spoolfile. After this point, Mutt runs exactly as if the mail had always
 been local.
 

-Note: If you only need to fetch all messages to a local mailbox you should
-consider using a specialized program, such as fetchmail, getmail or similar.
+Note
+
+If you only need to fetch all messages to a local mailbox you should consider
+using a specialized program, such as fetchmail(1), getmail(1) or similar.

 
 4. IMAP Support
 
 
 4. IMAP Support
 


@@ -4217,12 +4946,12 @@ If Mutt was compiled with IMAP support (by running the configure script with
 the --enable-imap flag), it has the ability to work with folders located on a
 remote IMAP server.
 
 the --enable-imap flag), it has the ability to work with folders located on a
 remote IMAP server.
 

-You can access the remote inbox by selecting the folder by its URL (see Section
-1.2, "URL syntax" for details) using the imap or imaps protocol. Alternatively,
-a pine-compatible notation is also supported, ie {[username@]imapserver[:port]
-[/ssl]}path/to/folder
+You can access the remote inbox by selecting the folder by its URL (see
+Section 1.2, ?URL Syntax? for details) using the imap or imaps protocol.
+Alternatively, a pine-compatible notation is also supported, ie {[username@]
+imapserver[:port][/ssl]}path/to/folder

 
 

-Note that not all servers use ``/'' as the hierarchy separator. Mutt should
+Note that not all servers use ?/? as the hierarchy separator. Mutt should

 correctly notice which separator is being used by the server and convert paths
 accordingly.
 
 correctly notice which separator is being used by the server and convert paths
 accordingly.
 


@@ -4231,35 +4960,38 @@ the folders you are subscribed to, or all folders with the toggle-subscribed
 command. See also the $imap_list_subscribed variable.
 
 Polling for new mail on an IMAP server can cause noticeable delays. So, you'll
 command. See also the $imap_list_subscribed variable.
 
 Polling for new mail on an IMAP server can cause noticeable delays. So, you'll

-want to carefully tune the $mail_check and $timeout variables. Personally I use
+want to carefully tune the $mail_check and $timeout variables. Reasonable
+values are:

 
 set mail_check=90
 set timeout=15
 
 
 set mail_check=90
 set timeout=15
 

-with relatively good results over my slow modem line.
+with relatively good results even over slow modem lines.
+
+Note

 
 Note that if you are using mbox as the mail store on UW servers prior to
 v12.250, the server has been reported to disconnect a client if another client
 selects the same folder.
 
 
 Note that if you are using mbox as the mail store on UW servers prior to
 v12.250, the server has been reported to disconnect a client if another client
 selects the same folder.
 

-4.1. The Folder Browser
+4.1. The IMAP Folder Browser

 
 

-As of version 1.2, mutt supports browsing mailboxes on an IMAP server. This is
+As of version 1.2, Mutt supports browsing mailboxes on an IMAP server. This is

 mostly the same as the local file browser, with the following differences:
 
 mostly the same as the local file browser, with the following differences:
 

-  ● In lieu of file permissions, mutt displays the string "IMAP", possibly
-    followed by the symbol "+", indicating that the entry contains both
+  * In lieu of file permissions, Mutt displays the string ?IMAP?, possibly
+    followed by the symbol ?+?, indicating that the entry contains both

     messages and subfolders. On Cyrus-like servers folders will often contain
     both messages and subfolders.
 
     messages and subfolders. On Cyrus-like servers folders will often contain
     both messages and subfolders.
 

-  ● For the case where an entry can contain both messages and subfolders, the
+  * For the case where an entry can contain both messages and subfolders, the

     selection key (bound to enter by default) will choose to descend into the
     subfolder view. If you wish to view the messages in that folder, you must
     use view-file instead (bound to space by default).
 
     selection key (bound to enter by default) will choose to descend into the
     subfolder view. If you wish to view the messages in that folder, you must
     use view-file instead (bound to space by default).
 

-  ● You can create, delete and rename mailboxes with the create-mailbox,
-    delete-mailbox, and rename-mailbox commands (default bindings: C, d and r,
-    respectively). You may also subscribe and unsubscribe to mailboxes
+  * You can create, delete and rename mailboxes with the <create-mailbox>,
+    <delete-mailbox>, and <rename-mailbox> commands (default bindings: C, d and
+    r, respectively). You may also <subscribe> and <unsubscribe> to mailboxes

     (normally these are bound to s and u, respectively).
 
 4.2. Authentication
     (normally these are bound to s and u, respectively).
 
 4.2. Authentication


@@ -4269,7 +5001,7 @@ CRAM-MD5, and LOGIN (there is a patch by Grant Edwards to add NTLM
 authentication for you poor exchange users out there, but it has yet to be
 integrated into the main tree). There is also support for the pseudo-protocol
 ANONYMOUS, which allows you to log in to a public IMAP server without having an
 authentication for you poor exchange users out there, but it has yet to be
 integrated into the main tree). There is also support for the pseudo-protocol
 ANONYMOUS, which allows you to log in to a public IMAP server without having an

-account. To use ANONYMOUS, simply make your username blank or "anonymous".
+account. To use ANONYMOUS, simply make your username blank or ?anonymous?.

 
 SASL is a special super-authenticator, which selects among several protocols
 (including GSSAPI, CRAM-MD5, ANONYMOUS, and DIGEST-MD5) the most secure method
 
 SASL is a special super-authenticator, which selects among several protocols
 (including GSSAPI, CRAM-MD5, ANONYMOUS, and DIGEST-MD5) the most secure method


@@ -4277,49 +5009,58 @@ available on your host and the server. Using some of these methods (including
 DIGEST-MD5 and possibly GSSAPI), your entire session will be encrypted and
 invisible to those teeming network snoops. It is the best option if you have
 it. To use it, you must have the Cyrus SASL library installed on your system
 DIGEST-MD5 and possibly GSSAPI), your entire session will be encrypted and
 invisible to those teeming network snoops. It is the best option if you have
 it. To use it, you must have the Cyrus SASL library installed on your system

-and compile mutt with the --with-sasl flag.
+and compile Mutt with the --with-sasl flag.

 
 Mutt will try whichever methods are compiled in and available on the server, in
 the following order: SASL, ANONYMOUS, GSSAPI, CRAM-MD5, LOGIN.
 
 There are a few variables which control authentication:
 
 
 Mutt will try whichever methods are compiled in and available on the server, in
 the following order: SASL, ANONYMOUS, GSSAPI, CRAM-MD5, LOGIN.
 
 There are a few variables which control authentication:
 

-  ● $imap_user - controls the username under which you request authentication
+  * $imap_user - controls the username under which you request authentication

     on the IMAP server, for all authenticators. This is overridden by an
     explicit username in the mailbox path (ie by using a mailbox name of the
     form {user@host}).
 
     on the IMAP server, for all authenticators. This is overridden by an
     explicit username in the mailbox path (ie by using a mailbox name of the
     form {user@host}).
 

-  ● $imap_pass - a password which you may preset, used by all authentication
+  * $imap_pass - a password which you may preset, used by all authentication

     methods where a password is needed.
 
     methods where a password is needed.
 

-  ● $imap_authenticators - a colon-delimited list of IMAP authentication
+  * $imap_authenticators - a colon-delimited list of IMAP authentication

     methods to try, in the order you wish to try them. If specified, this
     methods to try, in the order you wish to try them. If specified, this

-    overrides mutt's default (attempt everything, in the order listed above).
+    overrides Mutt's default (attempt everything, in the order listed above).

 
 5. SMTP Support
 
 Besides supporting traditional mail delivery through a sendmail-compatible
 
 5. SMTP Support
 
 Besides supporting traditional mail delivery through a sendmail-compatible

-program, mutt supports delivery through SMTP if it was configured and built
+program, Mutt supports delivery through SMTP if it was configured and built

 with --enable-smtp.
 
 with --enable-smtp.
 

-If the configuration variable $smtp_url is set, mutt will contact the given
-SMTP server to deliver messages; if it is unset, mutt will use the program
+If the configuration variable $smtp_url is set, Mutt will contact the given
+SMTP server to deliver messages; if it is unset, Mutt will use the program

 specified by $sendmail.
 
 specified by $sendmail.
 

-For details on the URL syntax, please see Section 1.2, "URL syntax".
+For details on the URL syntax, please see Section 1.2, ?URL Syntax?.

 
 The built-in SMTP support supports encryption (the smtps protocol using SSL or
 TLS) as well as SMTP authentication using SASL. The authentication mechanisms
 for SASL are specified in $smtp_authenticators defaulting to an empty list
 
 The built-in SMTP support supports encryption (the smtps protocol using SSL or
 TLS) as well as SMTP authentication using SASL. The authentication mechanisms
 for SASL are specified in $smtp_authenticators defaulting to an empty list

-which makes mutt try all available methods from most-secure to least-secure.
+which makes Mutt try all available methods from most-secure to least-secure.
+
+6. Managing Multiple Accounts

 
 

-6. Managing multiple accounts
+Usage:
+
+account-hook pattern command

 
 If you happen to have accounts on multiple IMAP, POP and/or SMTP servers, you
 may find managing all the authentication settings inconvenient and error-prone.
 The account-hook command may help. This hook works like folder-hook but is
 
 If you happen to have accounts on multiple IMAP, POP and/or SMTP servers, you
 may find managing all the authentication settings inconvenient and error-prone.
 The account-hook command may help. This hook works like folder-hook but is

-invoked whenever you access a remote mailbox (including inside the folder
-browser), not just when you open the mailbox.
+invoked whenever Mutt needs to access a remote mailbox (including inside the
+folder browser), not just when you open the mailbox. This includes (for
+example) polling for new mail, storing Fcc messages and saving messages to a
+folder. As a consequence, account-hook should only be used to set
+connection-related settings such as passwords or tunnel commands but not
+settings such as sender address or name (because in general it should be
+considered unpredictable which account-hook was last used).

 
 Some examples:
 
 
 Some examples:
 


@@ -4328,17 +5069,38 @@ account-hook imap://host1/ 'set imap_user=me1 imap_pass=foo'
 account-hook imap://host2/ 'set tunnel="ssh host2 /usr/libexec/imapd"'
 account-hook smtp://user@host3/ 'set tunnel="ssh host3 /usr/libexec/smtpd"'
 
 account-hook imap://host2/ 'set tunnel="ssh host2 /usr/libexec/imapd"'
 account-hook smtp://user@host3/ 'set tunnel="ssh host3 /usr/libexec/smtpd"'
 

-7. Local caching
+To manage multiple accounts with, for example, different values of $record or
+sender addresses, folder-hook has to be be used together with the mailboxes
+command.
+
+Example 6.2. Managing multiple accounts
+
+mailboxes imap://user@host1/INBOX
+folder-hook imap://user@host1/ 'set folder=imap://host1/ ; set record=+INBOX/Sent'
+
+mailboxes imap://user@host2/INBOX
+folder-hook imap://user@host2/ 'set folder=imap://host2/ ; set record=+INBOX/Sent'
+

 
 

-Mutt contains two types of local caching: (1) the so-called ``header caching''
-and (2) the so-called ``body caching'' which are both described in this
-section.
+In example Example 6.2, ?Managing multiple accounts? the folders are defined
+using mailboxes so Mutt polls them for new mail. Each folder-hook triggers when
+one mailbox below each IMAP account is opened and sets $folder to the account's
+root folder. Next, it sets $record to the INBOX/Sent folder below the newly set
+$folder. Please notice that the value the ?+? mailbox shortcut refers to
+depends on the current value of $folder and therefore has to be set separatedly
+per account. Setting other values like $from or $signature is analogous to
+setting $record.
+
+7. Local Caching
+
+Mutt contains two types of local caching: (1) the so-called ?header caching?
+and (2) the so-called ?body caching? which are both described in this section.

 
 Header caching is optional as it depends on external libraries, body caching is
 
 Header caching is optional as it depends on external libraries, body caching is

-always enabled if mutt is compiled with POP and/or IMAP support as these use it
+always enabled if Mutt is compiled with POP and/or IMAP support as these use it

 (body caching requires no external library).
 
 (body caching requires no external library).
 

-7.1. Header caching
+7.1. Header Caching

 
 Mutt provides optional support for caching message headers for the following
 types of folders: IMAP, POP, Maildir and MH. Header caching greatly improves
 
 Mutt provides optional support for caching message headers for the following
 types of folders: IMAP, POP, Maildir and MH. Header caching greatly improves


@@ -4349,42 +5111,29 @@ one file per message.)
 
 Header caching can be enabled via the configure script and the --enable-hcache
 option. It's not turned on by default because external database libraries are
 
 Header caching can be enabled via the configure script and the --enable-hcache
 option. It's not turned on by default because external database libraries are

-required: one of qdbm, gdbm or bdb must be present.
+required: one of tokyocabinet, qdbm, gdbm or bdb must be present.

 
 If enabled, $header_cache can be used to either point to a file or a directory.
 If set to point to a file, one database file for all folders will be used
 (which may result in lower performance), but one file per folder if it points
 to a directory.
 
 
 If enabled, $header_cache can be used to either point to a file or a directory.
 If set to point to a file, one database file for all folders will be used
 (which may result in lower performance), but one file per folder if it points
 to a directory.
 

-For the one-file-per-folder case, database files for remote folders will be
-named according to their URL while database files for local folders will be
-named by the MD5 checksums of their path. These database files may be safely
-removed if a system is short on space. You can compute the name of the header
-cache file for a particular local folder through a command like the following:
-
-$ printf '%s' '/path/to/folder' | md5sum
-
-The md5sum command may also be named md5, depending on your operating system.
-
-7.2. Body caching
+7.2. Body Caching

 
 Both cache methods can be combined using the same directory for storage (and
 for IMAP/POP even provide meaningful file names) which simplifies manual
 maintenance tasks.
 
 
 Both cache methods can be combined using the same directory for storage (and
 for IMAP/POP even provide meaningful file names) which simplifies manual
 maintenance tasks.
 

-In addition to caching message headers only, mutt can also cache whole message
+In addition to caching message headers only, Mutt can also cache whole message

 bodies. This results in faster display of messages for POP and IMAP folders
 because messages usually have to be downloaded only once.
 
 For configuration, the variable $message_cachedir must point to a directory.
 bodies. This results in faster display of messages for POP and IMAP folders
 because messages usually have to be downloaded only once.
 
 For configuration, the variable $message_cachedir must point to a directory.

-There, mutt will create a hierarchy of subdirectories named like:
-proto:user@hostname where proto is either ``pop'' or ``imap.'' Within there for
-each folder, mutt stores messages in single files (just like Maildir) so that
-with manual symlink creation these cache directories can be examined with mutt
-as read-only Maildir folders.
-
-All files can be removed as needed if the consumed disk space becomes an issue
-as mutt will silently fetch missing items again.
+There, Mutt will create a hierarchy of subdirectories named like:
+proto:user@hostname where proto is either ?pop? or ?imap.? Within there for
+each folder, Mutt stores messages in single files. All files can be removed as
+needed if the consumed disk space becomes an issue as Mutt will silently fetch
+missing items again.

 
 7.3. Maintenance
 
 
 7.3. Maintenance
 


@@ -4393,41 +5142,152 @@ files so that files have to be removed in case they grow too big. It depends on
 the database library used for header caching whether disk space freed by
 removing messages is re-used.
 
 the database library used for header caching whether disk space freed by
 removing messages is re-used.
 

-For body caches, mutt can keep the local cache in sync with the remote mailbox
+For body caches, Mutt can keep the local cache in sync with the remote mailbox

 if the $message_cache_clean variable is set. Cleaning means to remove messages
 from the cache which are no longer present in the mailbox which only happens
 if the $message_cache_clean variable is set. Cleaning means to remove messages
 from the cache which are no longer present in the mailbox which only happens

-when other mail clients or instances of mutt using a different body cache
+when other mail clients or instances of Mutt using a different body cache

 location delete messages (Mutt itself removes deleted messages from the cache
 when syncing a mailbox). As cleaning can take a noticeable amount of time, it
 should not be set in general but only occasionally.
 
 location delete messages (Mutt itself removes deleted messages from the cache
 when syncing a mailbox). As cleaning can take a noticeable amount of time, it
 should not be set in general but only occasionally.
 

-8. Exact address generation
+8. Exact Address Generation

 
 

-Mutt supports the ``Name <user@host>'' address syntax for reading and writing
-messages, the older ``user@host (Name)'' syntax is only supported when reading
+Mutt supports the ?Name <user@host>? address syntax for reading and writing
+messages, the older ?user@host (Name)? syntax is only supported when reading

 messages. The --enable-exact-address switch can be given to configure to build
 it with write-support for the latter syntax. EXACT_ADDRESS in the output of
 mutt -v indicates whether it's supported.
 
 messages. The --enable-exact-address switch can be given to configure to build
 it with write-support for the latter syntax. EXACT_ADDRESS in the output of
 mutt -v indicates whether it's supported.
 

-Chapter 7. Performance tuning
+9. Sending Anonymous Messages via Mixmaster
+
+You may also have compiled Mutt to co-operate with Mixmaster, an anonymous
+remailer. Mixmaster permits you to send your messages anonymously using a chain
+of remailers. Mixmaster support in Mutt is for mixmaster version 2.04 (beta 45
+appears to be the latest) and 2.03. It does not support earlier versions or the
+later so-called version 3 betas, of which the latest appears to be called
+2.9b23.
+
+To use it, you'll have to obey certain restrictions. Most important, you cannot
+use the Cc and Bcc headers. To tell Mutt to use mixmaster, you have to select a
+remailer chain, using the mix function on the compose menu.
+
+The chain selection screen is divided into two parts. In the (larger) upper
+part, you get a list of remailers you may use. In the lower part, you see the
+currently selected chain of remailers.
+
+You can navigate in the chain using the <chain-prev> and <chain-next>
+functions, which are by default bound to the left and right arrows and to the h
+and l keys (think vi keyboard bindings). To insert a remailer at the current
+chain position, use the <insert> function. To append a remailer behind the
+current chain position, use <select-entry> or <append>. You can also delete
+entries from the chain, using the corresponding function. Finally, to abandon
+your changes, leave the menu, or <accept> them pressing (by default) the Return
+key.
+
+Note that different remailers do have different capabilities, indicated in the
+%c entry of the remailer menu lines (see $mix_entry_format). Most important is
+the ?middleman? capability, indicated by a capital ?M?: This means that the
+remailer in question cannot be used as the final element of a chain, but will
+only forward messages to other mixmaster remailers. For details on the other
+capabilities, please have a look at the mixmaster documentation.
+
+Chapter 7. Security Considerations
+
+Table of Contents
+
+1. Passwords
+2. Temporary Files
+3. Information Leaks
+
+    3.1. Message-Id: headers
+    3.2. mailto:-style Links
+
+4. External Applications
+
+First of all, Mutt contains no security holes included by intention but may
+contain unknown security holes. As a consequence, please run Mutt only with as
+few permissions as possible. Especially, do not run Mutt as the super user.
+
+When configuring Mutt, there're some points to note about secure setups so
+please read this chapter carefully.
+
+1. Passwords
+
+Although Mutt can be told the various passwords for accounts, please never
+store passwords in configuration files. Besides the fact that the system's
+operator can always read them, you could forget to mask it out when reporting a
+bug or asking for help via a mailing list. Even worse, your mail including your
+password could be archived by internet search engines, mail-to-news gateways
+etc. It may already be too late before you notice your mistake.
+
+2. Temporary Files
+
+Mutt uses many temporary files for viewing messages, verifying digital
+signatures, etc. As long as being used, these files are visible by other users
+and maybe even readable in case of misconfiguration. Also, a different location
+for these files may be desired which can be changed via the $tmpdir variable.
+
+3. Information Leaks
+
+3.1. Message-Id: headers
+
+Message-Id: headers contain a local part that is to be created in a unique
+fashion. In order to do so, Mutt will ?leak? some information to the outside
+world when sending messages: the generation of this header includes a step
+counter which is increased (and rotated) with every message sent. In a longer
+running mutt session, others can make assumptions about your mailing habbits
+depending on the number of messages sent. If this is not desired, the header
+can be manually provided using $edit_headers (though not recommended).
+
+3.2. mailto:-style Links
+
+As Mutt be can be set up to be the mail client to handle mailto: style links in
+websites, there're security considerations, too. Arbitrary header fields can be
+embedded in these links which could override existing header fields or attach
+arbitrary files using the Attach: psuedoheader. This may be problematic if the
+$edit-headers variable is unset, i.e. the user doesn't want to see header
+fields while editing the message and doesn't pay enough attention to the
+compose menu's listing of attachments.
+
+For example, following a link like
+
+mailto:joe@host?Attach=~/.gnupg/secring.gpg
+
+will send out the user's private gnupg keyring to joe@host if the user doesn't
+follow the information on screen carefully enough.
+
+4. External Applications
+
+Mutt in many places has to rely on external applications or for convenience
+supports mechanisms involving external applications.
+
+One of these is the mailcap mechanism as defined by RfC1524. Details about a
+secure use of the mailcap mechanisms is given in Section 3.2, ?Secure Use of
+Mailcap?.
+
+Besides the mailcap mechanism, Mutt uses a number of other external utilities
+for operation, for example to provide crypto support, in backtick expansion in
+configuration files or format string filters. The same security considerations
+apply for these as for tools involved via mailcap.
+
+Chapter 8. Performance Tuning

 
 Table of Contents
 
 
 Table of Contents
 

-1. Reading and writing mailboxes
-2. Reading messages from remote folders
-3. Searching and limiting
+1. Reading and Writing Mailboxes
+2. Reading Messages from Remote Folders
+3. Searching and Limiting

 
 

-1. Reading and writing mailboxes
+1. Reading and Writing Mailboxes

 
 Mutt's performance when reading mailboxes can be improved in two ways:
 
  1. For remote folders (IMAP and POP) as well as folders using one-file-per
 
 Mutt's performance when reading mailboxes can be improved in two ways:
 
  1. For remote folders (IMAP and POP) as well as folders using one-file-per

-    message storage (Maildir and MH), mutt's performance can be greatly
-    improved using header caching. Using a single database per folder may
-    further increase performance.
+    message storage (Maildir and MH), Mutt's performance can be greatly
+    improved using header caching. using a single database per folder.

 
  2. Mutt provides the $read_inc and $write_inc variables to specify at which
 
  2. Mutt provides the $read_inc and $write_inc variables to specify at which

-    rate to update progress counters. If these values are too low, mutt may
+    rate to update progress counters. If these values are too low, Mutt may

     spend more time on updating the progress counter than it spends on actually
     reading/writing folders.
 
     spend more time on updating the progress counter than it spends on actually
     reading/writing folders.
 


@@ -4449,44 +5309,44 @@ produce either too few or too much progress updates. Thus, Mutt allows to limit
 the number of progress updates per second it'll actually send to the terminal
 using the $time_inc variable.
 
 the number of progress updates per second it'll actually send to the terminal
 using the $time_inc variable.
 

-2. Reading messages from remote folders
+2. Reading Messages from Remote Folders

 
 Reading messages from remote folders such as IMAP an POP can be slow especially
 
 Reading messages from remote folders such as IMAP an POP can be slow especially

-for large mailboxes since mutt only caches a very limited number of recently
+for large mailboxes since Mutt only caches a very limited number of recently

 viewed messages (usually 10) per session (so that it will be gone for the next
 session.)
 
 To improve performance and permanently cache whole messages, please refer to
 viewed messages (usually 10) per session (so that it will be gone for the next
 session.)
 
 To improve performance and permanently cache whole messages, please refer to

-mutt's so-called body caching for details.
+Mutt's so-called body caching for details.

 
 

-3. Searching and limiting
+3. Searching and Limiting

 
 When searching mailboxes either via a search or a limit action, for some
 
 When searching mailboxes either via a search or a limit action, for some

-patterns mutt distinguishes between regular expression and string searches. For
-regular expressions, patterns are prefixed with ``~'' and with ``='' for string
+patterns Mutt distinguishes between regular expression and string searches. For
+regular expressions, patterns are prefixed with ??? and with ?=? for string

 searches.
 
 Even though a regular expression search is fast, it's several times slower than
 searches.
 
 Even though a regular expression search is fast, it's several times slower than

-a pure string search which is noticable especially on large folders. As a
+a pure string search which is noticeable especially on large folders. As a

 consequence, a string search should be used instead of a regular expression
 search if the user already knows enough about the search pattern.
 
 For example, when limiting a large folder to all messages sent to or by an
 author, it's much faster to search for the initial part of an e-mail address
 consequence, a string search should be used instead of a regular expression
 search if the user already knows enough about the search pattern.
 
 For example, when limiting a large folder to all messages sent to or by an
 author, it's much faster to search for the initial part of an e-mail address

-via =Luser@ instead of ~Luser@. This is especially true for searching message
+via =Luser@ instead of ?Luser@. This is especially true for searching message

 bodies since a larger amount of input has to be searched.
 
 bodies since a larger amount of input has to be searched.
 

-Please note that string search is an exact case-sensitive search while a
-regular expression search with only lower-case letters performs a
-case-insensitive search.
+As for regular expressions, a lower case string search pattern makes Mutt
+perform a case-insensitive search except for IMAP (because for IMAP Mutt
+performs server-side searches which don't support case-insensivity).

 
 

-Chapter 8. Reference
+Chapter 9. Reference

 
 Table of Contents
 
 
 Table of Contents
 

-1. Command line options
+1. Command-Line Options

 2. Configuration Commands
 2. Configuration Commands

-3. Configuration variables
+3. Configuration Variables

 
     3.1. abort_nosubject
     3.2. abort_unmodified
 
     3.1. abort_nosubject
     3.2. abort_unmodified


@@ -4504,18 +5364,18 @@ Table of Contents
     3.14. attach_sep
     3.15. attach_split
     3.16. attribution
     3.14. attach_sep
     3.15. attach_split
     3.16. attribution

-    3.17. autoedit
-    3.18. auto_tag
+    3.17. auto_tag
+    3.18. autoedit

     3.19. beep
     3.20. beep_new
     3.21. bounce
     3.22. bounce_delivered
     3.23. braille_friendly
     3.19. beep
     3.20. beep_new
     3.21. bounce
     3.22. bounce_delivered
     3.23. braille_friendly

-    3.24. check_mbox_size
+    3.24. certificate_file

     3.25. charset
     3.25. charset

-    3.26. check_new
-    3.27. collapse_unread
-    3.28. uncollapse_jump
+    3.26. check_mbox_size
+    3.27. check_new
+    3.28. collapse_unread

     3.29. compose_format
     3.30. config_charset
     3.31. confirmappend
     3.29. compose_format
     3.30. config_charset
     3.31. confirmappend


@@ -4523,481 +5383,490 @@ Table of Contents
     3.33. connect_timeout
     3.34. content_type
     3.35. copy
     3.33. connect_timeout
     3.34. content_type
     3.35. copy

-    3.36. crypt_use_gpgme
-    3.37. crypt_use_pka
-    3.38. crypt_autopgp
+    3.36. crypt_autoencrypt
+    3.37. crypt_autopgp
+    3.38. crypt_autosign

     3.39. crypt_autosmime
     3.39. crypt_autosmime

-    3.40. date_format
-    3.41. default_hook
-    3.42. delete
-    3.43. delete_untag
-    3.44. digest_collapse
-    3.45. display_filter
-    3.46. dotlock_program
-    3.47. dsn_notify
-    3.48. dsn_return
-    3.49. duplicate_threads
-    3.50. edit_headers
-    3.51. editor
-    3.52. encode_from
-    3.53. envelope_from_address
-    3.54. escape
-    3.55. fast_reply
-    3.56. fcc_attach
-    3.57. fcc_clear
-    3.58. folder
-    3.59. folder_format
-    3.60. followup_to
-    3.61. force_name
-    3.62. forward_decode
-    3.63. forward_edit
-    3.64. forward_format
-    3.65. forward_quote
-    3.66. from
-    3.67. gecos_mask
-    3.68. hdrs
-    3.69. header
-    3.70. help
-    3.71. hidden_host
-    3.72. hide_limited
-    3.73. hide_missing
-    3.74. hide_thread_subject
-    3.75. hide_top_limited
-    3.76. hide_top_missing
-    3.77. history
-    3.78. history_file
-    3.79. honor_followup_to
-    3.80. hostname
-    3.81. ignore_linear_white_space
-    3.82. ignore_list_reply_to
-    3.83. imap_authenticators
-    3.84. imap_check_subscribed
-    3.85. imap_delim_chars
-    3.86. imap_headers
-    3.87. imap_idle
-    3.88. imap_keepalive
-    3.89. imap_list_subscribed
-    3.90. imap_login
-    3.91. imap_pass
-    3.92. imap_passive
-    3.93. imap_peek
-    3.94. imap_servernoise
-    3.95. imap_user
-    3.96. implicit_autoview
-    3.97. include
-    3.98. include_onlyfirst
-    3.99. indent_string
-    3.100. index_format
-    3.101. ispell
-    3.102. keep_flagged
-    3.103. locale
-    3.104. mail_check
-    3.105. mailcap_path
-    3.106. mailcap_sanitize
-    3.107. header_cache
-    3.108. maildir_header_cache_verify
-    3.109. header_cache_pagesize
-    3.110. header_cache_compress
-    3.111. maildir_trash
-    3.112. mark_old
-    3.113. markers
-    3.114. mask
-    3.115. mbox
-    3.116. mbox_type
-    3.117. metoo
-    3.118. menu_context
-    3.119. menu_move_off
-    3.120. menu_scroll
-    3.121. meta_key
-    3.122. mh_purge
-    3.123. mh_seq_flagged
-    3.124. mh_seq_replied
-    3.125. mh_seq_unseen
-    3.126. mime_forward
-    3.127. mime_forward_decode
-    3.128. mime_forward_rest
-    3.129. mix_entry_format
-    3.130. mixmaster
-    3.131. move
+    3.40. crypt_replyencrypt
+    3.41. crypt_replysign
+    3.42. crypt_replysignencrypted
+    3.43. crypt_timestamp
+    3.44. crypt_use_gpgme
+    3.45. crypt_use_pka
+    3.46. crypt_verify_sig
+    3.47. date_format
+    3.48. default_hook
+    3.49. delete
+    3.50. delete_untag
+    3.51. digest_collapse
+    3.52. display_filter
+    3.53. dotlock_program
+    3.54. dsn_notify
+    3.55. dsn_return
+    3.56. duplicate_threads
+    3.57. edit_headers
+    3.58. editor
+    3.59. encode_from
+    3.60. entropy_file
+    3.61. envelope_from_address
+    3.62. escape
+    3.63. fast_reply
+    3.64. fcc_attach
+    3.65. fcc_clear
+    3.66. folder
+    3.67. folder_format
+    3.68. followup_to
+    3.69. force_name
+    3.70. forward_decode
+    3.71. forward_decrypt
+    3.72. forward_edit
+    3.73. forward_format
+    3.74. forward_quote
+    3.75. from
+    3.76. gecos_mask
+    3.77. hdrs
+    3.78. header
+    3.79. header_cache
+    3.80. header_cache_compress
+    3.81. header_cache_pagesize
+    3.82. help
+    3.83. hidden_host
+    3.84. hide_limited
+    3.85. hide_missing
+    3.86. hide_thread_subject
+    3.87. hide_top_limited
+    3.88. hide_top_missing
+    3.89. history
+    3.90. history_file
+    3.91. honor_disposition
+    3.92. honor_followup_to
+    3.93. hostname
+    3.94. ignore_linear_white_space
+    3.95. ignore_list_reply_to
+    3.96. imap_authenticators
+    3.97. imap_check_subscribed
+    3.98. imap_delim_chars
+    3.99. imap_headers
+    3.100. imap_idle
+    3.101. imap_keepalive
+    3.102. imap_list_subscribed
+    3.103. imap_login
+    3.104. imap_pass
+    3.105. imap_passive
+    3.106. imap_peek
+    3.107. imap_pipeline_depth
+    3.108. imap_servernoise
+    3.109. imap_user
+    3.110. implicit_autoview
+    3.111. include
+    3.112. include_onlyfirst
+    3.113. indent_string
+    3.114. index_format
+    3.115. ispell
+    3.116. keep_flagged
+    3.117. locale
+    3.118. mail_check
+    3.119. mailcap_path
+    3.120. mailcap_sanitize
+    3.121. maildir_header_cache_verify
+    3.122. maildir_trash
+    3.123. mark_old
+    3.124. markers
+    3.125. mask
+    3.126. mbox
+    3.127. mbox_type
+    3.128. menu_context
+    3.129. menu_move_off
+    3.130. menu_scroll
+    3.131. message_cache_clean

     3.132. message_cachedir
     3.132. message_cachedir

-    3.133. message_cache_clean
-    3.134. message_format
-    3.135. narrow_tree
-    3.136. net_inc
-    3.137. pager
-    3.138. pager_context
-    3.139. pager_format
-    3.140. pager_index_lines
-    3.141. pager_stop
-    3.142. crypt_autosign
-    3.143. crypt_autoencrypt
-    3.144. pgp_ignore_subkeys
-    3.145. crypt_replyencrypt
-    3.146. crypt_replysign
-    3.147. crypt_replysignencrypted
-    3.148. crypt_timestamp
-    3.149. pgp_use_gpg_agent
-    3.150. crypt_verify_sig
-    3.151. smime_is_default
-    3.152. smime_ask_cert_label
-    3.153. smime_decrypt_use_default_key
-    3.154. pgp_entry_format
-    3.155. pgp_good_sign
-    3.156. pgp_check_exit
-    3.157. pgp_long_ids
-    3.158. pgp_retainable_sigs
-    3.159. pgp_autoinline
-    3.160. pgp_replyinline
-    3.161. pgp_show_unusable
-    3.162. pgp_sign_as
-    3.163. pgp_strict_enc
-    3.164. pgp_timeout
-    3.165. pgp_sort_keys
-    3.166. pgp_mime_auto
-    3.167. pgp_auto_decode
-    3.168. pgp_decode_command
-    3.169. pgp_getkeys_command
-    3.170. pgp_verify_command
-    3.171. pgp_decrypt_command
-    3.172. pgp_clearsign_command
-    3.173. pgp_sign_command
-    3.174. pgp_encrypt_sign_command
-    3.175. pgp_encrypt_only_command
-    3.176. pgp_import_command
-    3.177. pgp_export_command
-    3.178. pgp_verify_key_command
-    3.179. pgp_list_secring_command
-    3.180. pgp_list_pubring_command
-    3.181. forward_decrypt
-    3.182. smime_timeout
-    3.183. smime_encrypt_with
-    3.184. smime_keys
-    3.185. smime_ca_location
-    3.186. smime_certificates
-    3.187. smime_decrypt_command
-    3.188. smime_verify_command
-    3.189. smime_verify_opaque_command
-    3.190. smime_sign_command
-    3.191. smime_sign_opaque_command
-    3.192. smime_encrypt_command
-    3.193. smime_pk7out_command
-    3.194. smime_get_cert_command
-    3.195. smime_get_signer_cert_command
-    3.196. smime_import_cert_command
-    3.197. smime_get_cert_email_command
-    3.198. smime_default_key
-    3.199. ssl_client_cert
-    3.200. ssl_force_tls
-    3.201. ssl_starttls
-    3.202. certificate_file
-    3.203. ssl_usesystemcerts
-    3.204. entropy_file
-    3.205. ssl_use_sslv2
-    3.206. ssl_use_sslv3
-    3.207. ssl_use_tlsv1
-    3.208. ssl_min_dh_prime_bits
-    3.209. ssl_ca_certificates_file
-    3.210. pipe_split
-    3.211. pipe_decode
-    3.212. pipe_sep
-    3.213. pop_authenticators
-    3.214. pop_auth_try_all
-    3.215. pop_checkinterval
-    3.216. pop_delete
-    3.217. pop_host
-    3.218. pop_last
-    3.219. pop_reconnect
-    3.220. pop_user
-    3.221. pop_pass
-    3.222. post_indent_string
-    3.223. postpone
-    3.224. postponed
-    3.225. preconnect
-    3.226. print
-    3.227. print_command
-    3.228. print_decode
-    3.229. print_split
-    3.230. prompt_after
-    3.231. query_command
-    3.232. query_format
-    3.233. quit
-    3.234. quote_regexp
-    3.235. read_inc
-    3.236. read_only
-    3.237. realname
-    3.238. recall
-    3.239. record
-    3.240. reply_regexp
-    3.241. reply_self
-    3.242. reply_to
-    3.243. resolve
-    3.244. reverse_alias
-    3.245. reverse_name
-    3.246. reverse_realname
-    3.247. rfc2047_parameters
-    3.248. save_address
-    3.249. save_empty
-    3.250. save_history
-    3.251. save_name
-    3.252. score
-    3.253. score_threshold_delete
-    3.254. score_threshold_flag
-    3.255. score_threshold_read
-    3.256. send_charset
-    3.257. sendmail
-    3.258. sendmail_wait
-    3.259. shell
-    3.260. sig_dashes
-    3.261. sig_on_top
-    3.262. signature
-    3.263. simple_search
-    3.264. smart_wrap
-    3.265. smileys
-    3.266. sleep_time
-    3.267. smtp_authenticators
-    3.268. smtp_pass
-    3.269. smtp_url
-    3.270. sort
-    3.271. sort_alias
-    3.272. sort_aux
-    3.273. sort_browser
-    3.274. sort_re
-    3.275. spam_separator
-    3.276. spoolfile
-    3.277. status_chars
-    3.278. status_format
-    3.279. status_on_top
-    3.280. strict_threads
-    3.281. suspend
-    3.282. text_flowed
-    3.283. thread_received
-    3.284. thorough_search
-    3.285. tilde
-    3.286. time_inc
-    3.287. timeout
-    3.288. tmpdir
-    3.289. to_chars
-    3.290. tunnel
-    3.291. use_8bitmime
-    3.292. use_domain
-    3.293. use_envelope_from
-    3.294. use_from
-    3.295. use_idn
-    3.296. use_ipv6
-    3.297. user_agent
-    3.298. visual
-    3.299. wait_key
-    3.300. weed
-    3.301. wrap
-    3.302. wrap_search
-    3.303. wrapmargin
-    3.304. write_inc
-    3.305. write_bcc
+    3.133. message_format
+    3.134. meta_key
+    3.135. metoo
+    3.136. mh_purge
+    3.137. mh_seq_flagged
+    3.138. mh_seq_replied
+    3.139. mh_seq_unseen
+    3.140. mime_forward
+    3.141. mime_forward_decode
+    3.142. mime_forward_rest
+    3.143. mix_entry_format
+    3.144. mixmaster
+    3.145. move
+    3.146. narrow_tree
+    3.147. net_inc
+    3.148. pager
+    3.149. pager_context
+    3.150. pager_format
+    3.151. pager_index_lines
+    3.152. pager_stop
+    3.153. pgp_auto_decode
+    3.154. pgp_autoinline
+    3.155. pgp_check_exit
+    3.156. pgp_clearsign_command
+    3.157. pgp_decode_command
+    3.158. pgp_decrypt_command
+    3.159. pgp_encrypt_only_command
+    3.160. pgp_encrypt_sign_command
+    3.161. pgp_entry_format
+    3.162. pgp_export_command
+    3.163. pgp_getkeys_command
+    3.164. pgp_good_sign
+    3.165. pgp_ignore_subkeys
+    3.166. pgp_import_command
+    3.167. pgp_list_pubring_command
+    3.168. pgp_list_secring_command
+    3.169. pgp_long_ids
+    3.170. pgp_mime_auto
+    3.171. pgp_replyinline
+    3.172. pgp_retainable_sigs
+    3.173. pgp_show_unusable
+    3.174. pgp_sign_as
+    3.175. pgp_sign_command
+    3.176. pgp_sort_keys
+    3.177. pgp_strict_enc
+    3.178. pgp_timeout
+    3.179. pgp_use_gpg_agent
+    3.180. pgp_verify_command
+    3.181. pgp_verify_key_command
+    3.182. pipe_decode
+    3.183. pipe_sep
+    3.184. pipe_split
+    3.185. pop_auth_try_all
+    3.186. pop_authenticators
+    3.187. pop_checkinterval
+    3.188. pop_delete
+    3.189. pop_host
+    3.190. pop_last
+    3.191. pop_pass
+    3.192. pop_reconnect
+    3.193. pop_user
+    3.194. post_indent_string
+    3.195. postpone
+    3.196. postponed
+    3.197. preconnect
+    3.198. print
+    3.199. print_command
+    3.200. print_decode
+    3.201. print_split
+    3.202. prompt_after
+    3.203. query_command
+    3.204. query_format
+    3.205. quit
+    3.206. quote_regexp
+    3.207. read_inc
+    3.208. read_only
+    3.209. realname
+    3.210. recall
+    3.211. record
+    3.212. reply_regexp
+    3.213. reply_self
+    3.214. reply_to
+    3.215. resolve
+    3.216. reverse_alias
+    3.217. reverse_name
+    3.218. reverse_realname
+    3.219. rfc2047_parameters
+    3.220. save_address
+    3.221. save_empty
+    3.222. save_history
+    3.223. save_name
+    3.224. score
+    3.225. score_threshold_delete
+    3.226. score_threshold_flag
+    3.227. score_threshold_read
+    3.228. search_context
+    3.229. send_charset
+    3.230. sendmail
+    3.231. sendmail_wait
+    3.232. shell
+    3.233. sig_dashes
+    3.234. sig_on_top
+    3.235. signature
+    3.236. simple_search
+    3.237. sleep_time
+    3.238. smart_wrap
+    3.239. smileys
+    3.240. smime_ask_cert_label
+    3.241. smime_ca_location
+    3.242. smime_certificates
+    3.243. smime_decrypt_command
+    3.244. smime_decrypt_use_default_key
+    3.245. smime_default_key
+    3.246. smime_encrypt_command
+    3.247. smime_encrypt_with
+    3.248. smime_get_cert_command
+    3.249. smime_get_cert_email_command
+    3.250. smime_get_signer_cert_command
+    3.251. smime_import_cert_command
+    3.252. smime_is_default
+    3.253. smime_keys
+    3.254. smime_pk7out_command
+    3.255. smime_sign_command
+    3.256. smime_sign_opaque_command
+    3.257. smime_timeout
+    3.258. smime_verify_command
+    3.259. smime_verify_opaque_command
+    3.260. smtp_authenticators
+    3.261. smtp_pass
+    3.262. smtp_url
+    3.263. sort
+    3.264. sort_alias
+    3.265. sort_aux
+    3.266. sort_browser
+    3.267. sort_re
+    3.268. spam_separator
+    3.269. spoolfile
+    3.270. ssl_ca_certificates_file
+    3.271. ssl_client_cert
+    3.272. ssl_force_tls
+    3.273. ssl_min_dh_prime_bits
+    3.274. ssl_starttls
+    3.275. ssl_use_sslv2
+    3.276. ssl_use_sslv3
+    3.277. ssl_use_tlsv1
+    3.278. ssl_usesystemcerts
+    3.279. ssl_verify_dates
+    3.280. ssl_verify_host
+    3.281. status_chars
+    3.282. status_format
+    3.283. status_on_top
+    3.284. strict_threads
+    3.285. suspend
+    3.286. text_flowed
+    3.287. thorough_search
+    3.288. thread_received
+    3.289. tilde
+    3.290. time_inc
+    3.291. timeout
+    3.292. tmpdir
+    3.293. to_chars
+    3.294. tunnel
+    3.295. uncollapse_jump
+    3.296. use_8bitmime
+    3.297. use_domain
+    3.298. use_envelope_from
+    3.299. use_from
+    3.300. use_idn
+    3.301. use_ipv6
+    3.302. user_agent
+    3.303. visual
+    3.304. wait_key
+    3.305. weed
+    3.306. wrap
+    3.307. wrap_search
+    3.308. wrapmargin
+    3.309. write_bcc
+    3.310. write_inc

 
 4. Functions
 
 
 4. Functions
 

-    4.1. generic
-    4.2. index
-    4.3. pager
-    4.4. alias
-    4.5. query
-    4.6. attach
-    4.7. compose
-    4.8. postpone
-    4.9. browser
-    4.10. pgp
-    4.11. smime
-    4.12. mix
-    4.13. editor
-
-1. Command line options
+    4.1. Generic Menu
+    4.2. Index Menu
+    4.3. Pager Menu
+    4.4. Alias Menu
+    4.5. Query Menu
+    4.6. Attach Menu
+    4.7. Compose Menu
+    4.8. Postpone Menu
+    4.9. Browser Menu
+    4.10. Pgp Menu
+    4.11. Smime Menu
+    4.12. Mix Menu
+    4.13. Editor Menu
+
+1. Command-Line Options

 
 Running mutt with no arguments will make Mutt attempt to read your spool
 mailbox. However, it is possible to read other mailboxes and to send messages
 from the command line as well.
 
 
 Running mutt with no arguments will make Mutt attempt to read your spool
 mailbox. However, it is possible to read other mailboxes and to send messages
 from the command line as well.
 

-Table 8.1. Command line options
-
-┌──────┬──────────────────────────────────────────────────────────────────────┐
-│Option│                             Description                              │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-A    │expand an alias                                                       │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-a    │attach a file to a message                                            │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-b    │specify a blind carbon-copy (BCC) address                             │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-c    │specify a carbon-copy (Cc) address                                    │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-D    │print the value of all mutt variables to stdout                       │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-e    │specify a config command to be run after initialization files are read│
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-f    │specify a mailbox to load                                             │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-F    │specify an alternate file to read initialization commands             │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-h    │print help on command line options                                    │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-H    │specify a draft file from which to read a header and body             │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-i    │specify a file to include in a message composition                    │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-m    │specify a default mailbox type                                        │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-n    │do not read the system Muttrc                                         │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-p    │recall a postponed message                                            │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-Q    │query a configuration variable                                        │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-R    │open mailbox in read-only mode                                        │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-s    │specify a subject (enclose in quotes if it contains spaces)           │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-v    │show version number and compile-time definitions                      │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-x    │simulate the mailx(1) compose mode                                    │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-y    │show a menu containing the files specified by the mailboxes command   │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-z    │exit immediately if there are no messages in the mailbox              │
-├──────┼──────────────────────────────────────────────────────────────────────┤
-│-Z    │open the first folder with new message,exit immediately if none       │
-└──────┴──────────────────────────────────────────────────────────────────────┘
+Table 9.1. Command line options
+
++-----------------------------------------------------------------------------+
+|Option|                             Description                              |
+|------+----------------------------------------------------------------------|
+|-A    |expand an alias                                                       |
+|------+----------------------------------------------------------------------|
+|-a    |attach a file to a message                                            |
+|------+----------------------------------------------------------------------|
+|-b    |specify a blind carbon-copy (BCC) address                             |
+|------+----------------------------------------------------------------------|
+|-c    |specify a carbon-copy (Cc) address                                    |
+|------+----------------------------------------------------------------------|
+|-D    |print the value of all Mutt variables to stdout                       |
+|------+----------------------------------------------------------------------|
+|-e    |specify a config command to be run after initialization files are read|
+|------+----------------------------------------------------------------------|
+|-f    |specify a mailbox to load                                             |
+|------+----------------------------------------------------------------------|
+|-F    |specify an alternate file to read initialization commands             |
+|------+----------------------------------------------------------------------|
+|-h    |print help on command line options                                    |
+|------+----------------------------------------------------------------------|
+|-H    |specify a draft file from which to read a header and body             |
+|------+----------------------------------------------------------------------|
+|-i    |specify a file to include in a message composition                    |
+|------+----------------------------------------------------------------------|
+|-m    |specify a default mailbox type                                        |
+|------+----------------------------------------------------------------------|
+|-n    |do not read the system Muttrc                                         |
+|------+----------------------------------------------------------------------|
+|-p    |recall a postponed message                                            |
+|------+----------------------------------------------------------------------|
+|-Q    |query a configuration variable                                        |
+|------+----------------------------------------------------------------------|
+|-R    |open mailbox in read-only mode                                        |
+|------+----------------------------------------------------------------------|
+|-s    |specify a subject (enclose in quotes if it contains spaces)           |
+|------+----------------------------------------------------------------------|
+|-v    |show version number and compile-time definitions                      |
+|------+----------------------------------------------------------------------|
+|-x    |simulate the mailx(1) compose mode                                    |
+|------+----------------------------------------------------------------------|
+|-y    |show a menu containing the files specified by the mailboxes command   |
+|------+----------------------------------------------------------------------|
+|-z    |exit immediately if there are no messages in the mailbox              |
+|------+----------------------------------------------------------------------|
+|-Z    |open the first folder with new message, exit immediately if none      |
++-----------------------------------------------------------------------------+

 
 
 To read messages in a mailbox
 
 
 
 To read messages in a mailbox
 

-mutt [ -nz ] [ -F muttrc ] [ -m type ] [ -f mailbox ]
+mutt [-nz] [-F muttrc ] [-m type ] [-f mailbox ]

 
 To compose a new message
 
 
 To compose a new message
 

-mutt [ -n ] [ -F muttrc ] [ -a file ] [ -c address ] [ -i filename ] [ -s
-subject ] [ [ file ... ] -- ] address [ address ... ]
+mutt [-n] [-F muttrc ] [-c address ] [-i filename ] [-s subject ] [ -a file
+[...] -- ] address ...

 
 

-Mutt also supports a ``batch'' mode to send prepared messages. Simply redirect
+Mutt also supports a ?batch? mode to send prepared messages. Simply redirect

 input from the file you wish to send. For example,
 
 input from the file you wish to send. For example,
 

-mutt -s "data set for run #2" professor@bigschool.edu < ~/run2.dat
+mutt -s "data set for run #2" professor@bigschool.edu < ?/run2.dat

 
 

-This command will send a message to ``professor@bigschool.edu'' with a subject
-of ``data set for run #2''. In the body of the message will be the contents of
-the file ``~/run2.dat''.
+will send a message to <professor@bigschool.edu> with a subject of ?data set
+for run #2?. In the body of the message will be the contents of the file ??/
+run2.dat?.

 
 All files passed with -a file will be attached as a MIME part to the message.
 
 All files passed with -a file will be attached as a MIME part to the message.

-To attach several files, use ``--'' to separate files and recipient addresses:
-mutt -a *.png -- some@one.org
-
-2. Configuration Commands
-
-The following are the commands understood by mutt.
-
-  ● account-hookpatterncommand
+To attach a single or several files, use ?--? to separate files and recipient
+addresses:

 
 

-  ● alias [ -groupname [ ... ] ] keyaddress [ , address, ... ]
+mutt -a image.png -- some@one.org

 
 

-  ● unalias [ * | key ... ]
+or

 
 

-  ● alternates [ -groupname [ ... ] ] regexp [ regexp ... ]
-
-  ● unalternates [ * | regexp ... ]
-
-  ● alternative-ordermimetype [ mimetype ... ]
-
-  ● unalternative-ordermimetype [ mimetype ... ]
-
-  ● auto_viewmimetype [ mimetype ... ]
-
-  ● unauto_viewmimetype [ mimetype ... ]
-
-  ● bindmapkeyfunction
-
-  ● charset-hookaliascharset
+mutt -a *.png -- some@one.org

 
 

-  ● iconv-hookcharsetlocal-charset
+Note

 
 

-  ● colorobjectforegroundbackground [ regexp ]
+The -a option must be last in the option list.

 
 

-  ● uncolorindexpattern [ pattern ... ]
+2. Configuration Commands

 
 

-  ● execfunction [ function ... ]
+The following are the commands understood by Mutt:

 
 

-  ● fcc-hookpatternmailbox
+  * account-hook pattern command

 
 

-  ● fcc-save-hookpatternmailbox
+  * alias [ -group name ...] key address [ address ...]
+    unalias [ -group name ...] { * | key ... }

 
 

-  ● folder-hookpatterncommand
+  * alternates [ -group name ...] regexp [ regexp ...]
+    unalternates [ -group name ...] { * | regexp ... }

 
 

-  ● hdr_orderheader [ header ... ]
+  * alternative-order mimetype [ mimetype ...]
+    unalternative-order { * | mimetype ... }

 
 

-  ● unhdr_orderheader [ header ... ]
+  * attachments { + | - }disposition mime-type
+    unattachments { + | - }disposition mime-type

 
 

-  ● ignorepattern [ pattern ... ]
+  * auto-view mimetype [ mimetype ...]
+    unauto-view { * | mimetype ... }

 
 

-  ● unignorepattern [ pattern ... ]
+  * bind map key function

 
 

-  ● lists [ -groupname [ ... ] ] regexp [ regexp ... ]
+  * charset-hook alias charset

 
 

-  ● unlistsregexp [ regexp ... ]
+  * iconv-hook charset local-charset

 
 

-  ● macromenukeysequence [ description ]
+  * color object foreground background
+    color { header | body } foreground background regexp
+    color index foreground background pattern
+    uncolor { index | header | body } { * | pattern ... }

 
 

-  ● mailboxesfilename [ filename ... ]
+  * crypt-hook pattern keyid

 
 

-  ● mbox-hookpatternmailbox
+  * exec function [ function ...]

 
 

-  ● message-hookpatterncommand
+  * fcc-hook [!]pattern mailbox

 
 

-  ● mime_lookupmimetype [ mimetype ... ]
+  * fcc-save-hook [!]pattern mailbox

 
 

-  ● unmime_lookupmimetype [ mimetype ... ]
+  * folder-hook [!]regexp command

 
 

-  ● monoobject attribute [ regexp ]
+  * group [ -group name ...] { -rx expr ... | -addr expr ... }
+    ungroup [ -group name ...] { * | -rx expr ... | -addr expr ... }

 
 

-  ● unmonoindexpattern [ pattern ... ]
+  * hdr_order header [ header ...]
+    unhdr_order { * | header ... }

 
 

-  ● my_hdrstring
+  * ignore pattern [ pattern ...]
+    unignore { * | pattern ... }

 
 

-  ● unmy_hdrfield [ field ... ]
+  * lists [ -group name ] regexp [ regexp ...]
+    unlists [ -group name ...] { * | regexp ... }

 
 

-  ● crypt-hookpatternkey-id
+  * macro menu key sequence [ description ]

 
 

-  ● pushstring
+  * mailboxes mailbox [ mailbox ...]
+    unmailboxes { * | mailbox ... }

 
 

-  ● resetvariable [variable ... ]
+  * mbox-hook [!]pattern mailbox

 
 

-  ● save-hookregexpfilename
+  * message-hook [!]pattern command

 
 

-  ● scorepatternvalue
+  * mime-lookup mimetype [ mimetype ...]
+    unmime-lookup { * | mimetype ... }

 
 

-  ● unscorepattern [ pattern ... ]
+  * mono object attribute
+    mono { header | body } attribute regexp
+    mono index attribute pattern
+    unmono { index | header | body } { * | pattern ... }

 
 

-  ● reply-hookpatterncommand
+  * my_hdr string
+    unmy_hdr { * | field ... }

 
 

-  ● send-hookpatterncommand
+  * push string

 
 

-  ● send2-hookpatterncommand
+  * save-hook [!]pattern mailbox

 
 

-  ● set [no|inv]variable[=value] [ variable ... ]
+  * score pattern value
+    unscore { * | pattern ... }

 
 

-  ● unsetvariable [variable ... ]
+  * reply-hook [!]pattern command

 
 

-  ● sourcefilename
+  * send-hook [!]pattern command

 
 

-  ● spampatternformat
+  * send2-hook [!]pattern command

 
 

-  ● nospampattern
+  * set { [ no | inv ] variable | variable=value } [...]
+    toggle variable [ variable ...]
+    unset variable [ variable ...]
+    reset variable [ variable ...]

 
 

-  ● subscribe [ -groupname [ ... ] ] regexp [ regexp ... ]
+  * source filename

 
 

-  ● unsubscriberegexp [ regexp ... ]
+  * spam pattern format
+    nospam { * | pattern }

 
 

-  ● togglevariable [variable ... ]
+  * subscribe [ -group name ...] regexp [ regexp ...]
+    unsubscribe [ -group name ...] { * | regexp ... }

 
 

-  ● unhookhook-type
+  * unhook { * | hook-type }

 
 

-3. Configuration variables
+3. Configuration Variables

 
 3.1. abort_nosubject
 
 
 3.1. abort_nosubject
 


@@ -5020,44 +5889,38 @@ first edit of the file). When set to no, composition will never be aborted.
 3.3. alias_file
 
 Type: path
 3.3. alias_file
 
 Type: path

-Default: "~/.muttrc"
+Default: ??/.muttrc?

 
 

-The default file in which to save aliases created by the ``create-alias''
-function.
+The default file in which to save aliases created by the <create-alias>
+function. Entries added to this file are encoded in the character set specified
+by $config_charset if it is set or the current character set otherwise.

 
 Note: Mutt will not automatically source this file; you must explicitly use the
 
 Note: Mutt will not automatically source this file; you must explicitly use the

-``source'' command for it to be executed.
+?source? command for it to be executed in case this option points to a
+dedicated alias file.

 
 

-The default for this option is the currently used muttrc file, or ``~/.muttrc''
+The default for this option is the currently used muttrc file, or ??/.muttrc?

 if no user muttrc was found.
 
 3.4. alias_format
 
 Type: string
 if no user muttrc was found.
 
 3.4. alias_format
 
 Type: string

-Default: "%4n %2f %t %-10a %r"
+Default: ?%4n %2f %t %-10a   %r?

 
 

-Specifies the format of the data displayed for the `alias' menu. The following
+Specifies the format of the data displayed for the ?alias? menu. The following

 printf(3)-style sequences are available:
 
 printf(3)-style sequences are available:
 

-%a
-
-    alias name
-
-%f
-
-    flags - currently, a "d" for an alias marked for deletion
-
-%n
-
-    index number
-
-%r
-
-    address which alias expands to
-
-%t
-
-    character which indicates if the alias is tagged for inclusion
++-----------------------------------------------------------------+
+|%a|alias name                                                    |
+|--+--------------------------------------------------------------|
+|%f|flags - currently, a ?d? for an alias marked for deletion     |
+|--+--------------------------------------------------------------|
+|%n|index number                                                  |
+|--+--------------------------------------------------------------|
+|%r|address which alias expands to                                |
+|--+--------------------------------------------------------------|
+|%t|character which indicates if the alias is tagged for inclusion|
++-----------------------------------------------------------------+

 
 3.5. allow_8bit
 
 
 3.5. allow_8bit
 


@@ -5076,15 +5939,19 @@ Controls whether ANSI color codes in messages (and color tags in rich text
 messages) are to be interpreted. Messages containing these codes are rare, but
 if this option is set, their text will be colored accordingly. Note that this
 may override your color choices, and even present a security problem, since a
 messages) are to be interpreted. Messages containing these codes are rare, but
 if this option is set, their text will be colored accordingly. Note that this
 may override your color choices, and even present a security problem, since a

-message could include a line like "[-- PGP output follows ..." and give it the
-same color as your attachment color.
+message could include a line like
+
+[-- PGP output follows ...
+
+and give it the same color as your attachment color (see also $crypt_timestamp
+).

 
 3.7. arrow_cursor
 
 Type: boolean
 Default: no
 
 
 3.7. arrow_cursor
 
 Type: boolean
 Default: no
 

-When set, an arrow (``->'') will be used to indicate the current entry in menus
+When set, an arrow (?->?) will be used to indicate the current entry in menus

 instead of highlighting the whole line. On slow network or modem links this
 will make response faster because there is less that has to be redrawn on the
 screen when moving to the next or previous entries in the menu.
 instead of highlighting the whole line. On slow network or modem links this
 will make response faster because there is less that has to be redrawn on the
 screen when moving to the next or previous entries in the menu.


@@ -5116,13 +5983,13 @@ body of an outgoing message.
 3.11. assumed_charset
 
 Type: string
 3.11. assumed_charset
 
 Type: string

-Default: ""
+Default: (empty)

 
 This variable is a colon-separated list of character encoding schemes for
 messages without character encoding indication. Header field values and message
 body content without character encoding indication would be assumed that they
 are written in one of this list. By default, all the header fields and message
 
 This variable is a colon-separated list of character encoding schemes for
 messages without character encoding indication. Header field values and message
 body content without character encoding indication would be assumed that they
 are written in one of this list. By default, all the header fields and message

-body without any charset indication are assumed to be in "us-ascii".
+body without any charset indication are assumed to be in ?us-ascii?.

 
 For example, Japanese users might prefer this:
 
 
 For example, Japanese users might prefer this:
 


@@ -5133,152 +6000,125 @@ However, only the first content is valid for the message body.
 3.12. attach_charset
 
 Type: string
 3.12. attach_charset
 
 Type: string

-Default: ""
+Default: (empty)

 
 This variable is a colon-separated list of character encoding schemes for text
 
 This variable is a colon-separated list of character encoding schemes for text

-file attachments. If unset, $charset value will be used instead. For example,
-the following configuration would work for Japanese text handling:
+file attachments. Mutt uses this setting to guess which encoding files being
+attached are encoded in to convert them to a proper character set given in
+$send_charset.
+
+If unset, the value of $charset will be used instead. For example, the
+following configuration would work for Japanese text handling:

 
 set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
 
 
 set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
 

-Note: "iso-2022-*" must be put at the head of the value as shown above if
-included.
+Note: for Japanese users, ?iso-2022-*? must be put at the head of the value as
+shown above if included.

 
 3.13. attach_format
 
 Type: string
 
 3.13. attach_format
 
 Type: string

-Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
-
-This variable describes the format of the `attachment' menu. The following
-printf-style sequences are understood:
+Default: ?%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] ?
+
+This variable describes the format of the ?attachment? menu. The following
+printf(3)-style sequences are understood:
+
++-----------------------------------------------------------------------------+
+|%C |charset                                                                  |
+|---+-------------------------------------------------------------------------|
+|%c |requires charset conversion (?n? or ?c?)                                 |
+|---+-------------------------------------------------------------------------|
+|%D |deleted flag                                                             |
+|---+-------------------------------------------------------------------------|
+|%d |description                                                              |
+|---+-------------------------------------------------------------------------|
+|%e |MIME content-transfer-encoding                                           |
+|---+-------------------------------------------------------------------------|
+|%f |filename                                                                 |
+|---+-------------------------------------------------------------------------|
+|%I |disposition (?I? for inline, ?A? for attachment)                         |
+|---+-------------------------------------------------------------------------|
+|%m |major MIME type                                                          |
+|---+-------------------------------------------------------------------------|
+|%M |MIME subtype                                                             |
+|---+-------------------------------------------------------------------------|
+|%n |attachment number                                                        |
+|---+-------------------------------------------------------------------------|
+|%Q |?Q?, if MIME part qualifies for attachment counting                      |
+|---+-------------------------------------------------------------------------|
+|%s |size                                                                     |
+|---+-------------------------------------------------------------------------|
+|%t |tagged flag                                                              |
+|---+-------------------------------------------------------------------------|
+|%T |graphic tree characters                                                  |
+|---+-------------------------------------------------------------------------|
+|%u |unlink (=to delete) flag                                                 |
+|---+-------------------------------------------------------------------------|
+|%X |number of qualifying MIME parts in this part and its children (please see|
+|   |the ?attachments? section for possible speed effects)                    |
+|---+-------------------------------------------------------------------------|
+|%>X|right justify the rest of the string and pad with character ?X?          |
+|---+-------------------------------------------------------------------------|
+|%|X|pad to the end of the line with character ?X?                            |
+|---+-------------------------------------------------------------------------|
+|%*X|soft-fill with character ?X? as pad                                      |
++-----------------------------------------------------------------------------+
+
+For an explanation of ?soft-fill?, see the $index_format documentation.

 
 

-%C
+3.14. attach_sep

 
 

-    charset
+Type: string
+Default: ?\n?

 
 

-%c
+The separator to add between attachments when operating (saving, printing,
+piping, etc) on a list of tagged attachments.

 
 

-    requires charset conversion (n or c)
+3.15. attach_split

 
 

-%D
+Type: boolean
+Default: yes

 
 

-    deleted flag
+If this variable is unset, when operating (saving, printing, piping, etc) on a
+list of tagged attachments, Mutt will concatenate the attachments and will
+operate on them as a single attachment. The $attach_sep separator is added
+after each attachment. When set, Mutt will operate on the attachments one by
+one.

 
 

-%d
+3.16. attribution

 
 

-    description
+Type: string
+Default: ?On %d, %n wrote:?

 
 

-%e
+This is the string that will precede a message which has been included in a
+reply. For a full listing of defined printf(3)-like sequences see the section
+on $index_format.

 
 

-    MIME content-transfer-encoding
+3.17. auto_tag

 
 

-%f
+Type: boolean
+Default: no

 
 

-    filename
-
-%I
-
-    disposition (I=inline, A=attachment)
-
-%m
-
-    major MIME type
-
-%M
-
-    MIME subtype
-
-%n
-
-    attachment number
-
-%Q
-
-    "Q", if MIME part qualifies for attachment counting
-
-%s
-
-    size
-
-%t
-
-    tagged flag
-
-%T
-
-    graphic tree characters
-
-%u
-
-    unlink (=to delete) flag
-
-%X
-
-    number of qualifying MIME parts in this part and its children (please see
-    the ``attachments'' section for possible speed effects)
-
-%>X
-
-    right justify the rest of the string and pad with character "X"
-
-%|X
-
-    pad to the end of the line with character "X"
-
-%*X
-
-    soft-fill with character "X" as pad
-
-For an explanation of `soft-fill', see the ``$index_format'' documentation.
-
-3.14. attach_sep
-
-Type: string
-Default: "\n"
-
-The separator to add between attachments when operating (saving, printing,
-piping, etc) on a list of tagged attachments.
-
-3.15. attach_split
-
-Type: boolean
-Default: yes
-
-If this variable is unset, when operating (saving, printing, piping, etc) on a
-list of tagged attachments, Mutt will concatenate the attachments and will
-operate on them as a single attachment. The ``$attach_sep'' separator is added
-after each attachment. When set, Mutt will operate on the attachments one by
-one.
-
-3.16. attribution
-
-Type: string
-Default: "On %d, %n wrote:"
-
-This is the string that will precede a message which has been included in a
-reply. For a full listing of defined printf()-like sequences see the section on
-``$index_format''.
+When set, functions in the index menu which affect a message will be applied to
+all tagged messages (if there are any). When unset, you must first use the
+<tag-prefix> function (bound to ?;? by default) to make the next function apply
+to all tagged messages.

 
 

-3.17. autoedit
+3.18. autoedit

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-When set along with ``$edit_headers'', Mutt will skip the initial send-menu and
-allow you to immediately begin editing the body of your message. The send-menu
-may still be accessed once you have finished editing the body of your message.
-
-Also see ``$fast_reply''.
+When set along with $edit_headers, Mutt will skip the initial send-menu
+(prompting for subject and recipients) and allow you to immediately begin
+editing the body of your message. The send-menu may still be accessed once you
+have finished editing the body of your message.

 
 

-3.18. auto_tag
-
-Type: boolean
-Default: no
+Note: when this option is set, you cannot use send-hooks that depend on the
+recipients when composing a new (non-reply) message, as the initial list of
+recipients is empty.

 
 

-When set, functions in the index menu which affect a message will be applied to
-all tagged messages (if there are any). When unset, you must first use the
-tag-prefix function (default: ";") to make the next function apply to all
-tagged messages.
+Also see $fast_reply.

 
 3.19. beep
 
 
 3.19. beep
 


@@ -5293,7 +6133,7 @@ Type: boolean
 Default: no
 
 When this variable is set, mutt will beep whenever it prints a message
 Default: no
 
 When this variable is set, mutt will beep whenever it prints a message

-notifying you of new mail. This is independent of the setting of the ``$beep''
+notifying you of new mail. This is independent of the setting of the $beep

 variable.
 
 3.21. bounce
 variable.
 
 3.21. bounce


@@ -5320,28 +6160,61 @@ Type: boolean
 Default: no
 
 When this variable is set, mutt will place the cursor at the beginning of the
 Default: no
 
 When this variable is set, mutt will place the cursor at the beginning of the

-current line in menus, even when the arrow_cursor variable is unset, making it
+current line in menus, even when the $arrow_cursor variable is unset, making it

 easier for blind persons using Braille displays to follow these menus. The
 easier for blind persons using Braille displays to follow these menus. The

-option is disabled by default because many visual terminals don't permit making
+option is unset by default because many visual terminals don't permit making

 the cursor invisible.
 
 the cursor invisible.
 

-3.24. check_mbox_size
+3.24. certificate_file

 
 

-Type: boolean
-Default: no
+Type: path
+Default: ??/.mutt_certificates?

 
 

-When this variable is set, mutt will use file size attribute instead of access
-time when checking for new mail.
+This variable specifies the file where the certificates you trust are saved.
+When an unknown certificate is encountered, you are asked if you accept it or
+not. If you accept it, the certificate can also be saved in this file and
+further connections are automatically accepted.
+
+You can also manually add CA certificates in this file. Any server certificate
+that is signed with one of these CA certificates is also automatically
+accepted.
+
+Example:
+
+set certificate_file=~/.mutt/certificates

 
 3.25. charset
 
 Type: string
 
 3.25. charset
 
 Type: string

-Default: ""
+Default: (empty)

 
 Character set your terminal uses to display and enter textual data. It is also
 the fallback for $send_charset.
 
 
 Character set your terminal uses to display and enter textual data. It is also
 the fallback for $send_charset.
 

-3.26. check_new
+Upon startup Mutt tries to derive this value from environment variables such as
+$LC_CTYPE or $LANG.
+
+Note: It should only be set in case Mutt isn't abled to determine the character
+set used correctly.
+
+3.26. check_mbox_size
+
+Type: boolean
+Default: no
+
+When this variable is set, mutt will use file size attribute instead of access
+time when checking for new mail in mbox and mmdf folders.
+
+This variable is unset by default and should only be enabled when new mail
+detection for these folder types is unreliable or doesn't work.
+
+Note that enabling this variable should happen before any ?mailboxes?
+directives occur in configuration files regarding mbox or mmdf folders because
+mutt needs to determine the initial new mail status of such a mailbox by
+performing a fast mailbox scan when it is defined. Afterwards the new mail
+status is tracked by file size changes.
+
+3.27. check_new

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -5351,58 +6224,53 @@ Note: this option only affects maildir and MH style mailboxes.
 When set, Mutt will check for new mail delivered while the mailbox is open.
 Especially with MH mailboxes, this operation can take quite some time since it
 involves scanning the directory and checking each file to see if it has already
 When set, Mutt will check for new mail delivered while the mailbox is open.
 Especially with MH mailboxes, this operation can take quite some time since it
 involves scanning the directory and checking each file to see if it has already

-been looked at. If check_new is unset, no check for new mail is performed while
-the mailbox is open.
+been looked at. If this variable is unset, no check for new mail is performed
+while the mailbox is open.

 
 

-3.27. collapse_unread
+3.28. collapse_unread

 
 Type: boolean
 Default: yes
 
 When unset, Mutt will not collapse a thread if it contains any unread messages.
 
 
 Type: boolean
 Default: yes
 
 When unset, Mutt will not collapse a thread if it contains any unread messages.
 

-3.28. uncollapse_jump
-
-Type: boolean
-Default: no
-
-When set, Mutt will jump to the next unread message, if any, when the current
-thread is uncollapsed.
-

 3.29. compose_format
 
 Type: string
 3.29. compose_format
 
 Type: string

-Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
+Default: ?-- Mutt: Compose  [Approx. msg size: %l   Atts: %a]%>-?

 
 

-Controls the format of the status line displayed in the Compose menu. This
-string is similar to ``$status_format'', but has its own set of printf()-like
+Controls the format of the status line displayed in the ?compose? menu. This
+string is similar to $status_format, but has its own set of printf(3)-like

 sequences:
 
 sequences:
 

-%a
-
-    total number of attachments
-
-%h
++-----------------------------------------------------+
+|%a|total number of attachments                       |
+|--+--------------------------------------------------|
+|%h|local hostname                                    |
+|--+--------------------------------------------------|
+|%l|approximate size (in bytes) of the current message|
+|--+--------------------------------------------------|
+|%v|Mutt version string                               |
++-----------------------------------------------------+

 
 

-    local hostname
-
-%l
-
-    approximate size (in bytes) of the current message
-
-%v
-
-    Mutt version string
-
-See the text describing the ``$status_format'' option for more information on
-how to set ``$compose_format''.
+See the text describing the $status_format option for more information on how
+to set $compose_format.

 
 3.30. config_charset
 
 Type: string
 
 3.30. config_charset
 
 Type: string

-Default: ""
+Default: (empty)
+
+When defined, Mutt will recode commands in rc files from this encoding to the
+current character set as specified by $charset and aliases written to
+$alias_file from the current character set.

 
 

-When defined, Mutt will recode commands in rc files from this encoding.
+Please note that if setting $charset it must be done before setting
+$config_charset.
+
+Recoding should be avoided as it may render unconvertable characters as
+question marks which can lead to undesired side effects (for example in regular
+expressions).

 
 3.31. confirmappend
 
 
 3.31. confirmappend
 


@@ -5425,14 +6293,14 @@ which does not yet exist before creating it.
 Type: number
 Default: 30
 
 Type: number
 Default: 30
 

-Causes Mutt to timeout a network connection (for IMAP or POP) after this many
-seconds if the connection is not able to be established. A negative value
-causes Mutt to wait indefinitely for the connection to succeed.
+Causes Mutt to timeout a network connection (for IMAP, POP or SMTP) after this
+many seconds if the connection is not able to be established. A negative value
+causes Mutt to wait indefinitely for the connection attempt to succeed.

 
 3.34. content_type
 
 Type: string
 
 3.34. content_type
 
 Type: string

-Default: "text/plain"
+Default: ?text/plain?

 
 Sets the default Content-Type for the body of newly composed messages.
 
 
 Sets the default Content-Type for the body of newly composed messages.
 


@@ -5442,36 +6310,41 @@ Type: quadoption
 Default: yes
 
 This variable controls whether or not copies of your outgoing messages will be
 Default: yes
 
 This variable controls whether or not copies of your outgoing messages will be

-saved for later references. Also see ``$record'', ``$save_name'', ``$force_name
-'' and ``fcc-hook''.
+saved for later references. Also see $record, $save_name, $force_name and ?
+fcc-hook?.

 
 

-3.36. crypt_use_gpgme
+3.36. crypt_autoencrypt

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-This variable controls the use of the GPGME-enabled crypto backends. If it is
-set and Mutt was built with gpgme support, the gpgme code for S/MIME and PGP
-will be used instead of the classic code. Note that you need to set this option
-in .muttrc; it won't have any effect when used interactively.
+Setting this variable will cause Mutt to always attempt to PGP encrypt outgoing
+messages. This is probably only useful in connection to the ?send-hook?
+command. It can be overridden by use of the pgp menu, when encryption is not
+required or signing is requested as well. If $smime_is_default is set, then
+OpenSSL is used instead to create S/MIME messages and settings can be
+overridden by use of the smime menu instead. (Crypto only)

 
 

-3.37. crypt_use_pka
+3.37. crypt_autopgp

 
 Type: boolean
 
 Type: boolean

-Default: no
+Default: yes

 
 

-(http://www.g10code.de/docs/pka-intro.de.pdf) during signature verification
-(only supported by the GPGME backend).
+This variable controls whether or not mutt may automatically enable PGP
+encryption/signing for messages. See also $crypt_autoencrypt,
+$crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default.

 
 

-3.38. crypt_autopgp
+3.38. crypt_autosign

 
 Type: boolean
 
 Type: boolean

-Default: yes
+Default: no

 
 

-This variable controls whether or not mutt may automatically enable PGP
-encryption/signing for messages. See also ``$crypt_autoencrypt'', ``
-$crypt_replyencrypt'', ``$crypt_autosign'', ``$crypt_replysign'' and ``
-$smime_is_default''.
+Setting this variable will cause Mutt to always attempt to cryptographically
+sign outgoing messages. This can be overridden by use of the pgp menu, when
+signing is not required or encryption is requested as well. If
+$smime_is_default is set, then OpenSSL is used instead to create S/MIME
+messages and settings can be overridden by use of the smime menu instead of the
+pgp menu. (Crypto only)

 
 3.39. crypt_autosmime
 
 
 3.39. crypt_autosmime
 


@@ -5479,40 +6352,107 @@ Type: boolean
 Default: yes
 
 This variable controls whether or not mutt may automatically enable S/MIME
 Default: yes
 
 This variable controls whether or not mutt may automatically enable S/MIME

-encryption/signing for messages. See also ``$crypt_autoencrypt'', ``
-$crypt_replyencrypt'', ``$crypt_autosign'', ``$crypt_replysign'' and ``
-$smime_is_default''.
+encryption/signing for messages. See also $crypt_autoencrypt,
+$crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default.
+
+3.40. crypt_replyencrypt
+
+Type: boolean
+Default: yes
+
+If set, automatically PGP or OpenSSL encrypt replies to messages which are
+encrypted. (Crypto only)
+
+3.41. crypt_replysign
+
+Type: boolean
+Default: no
+
+If set, automatically PGP or OpenSSL sign replies to messages which are signed.

 
 

-3.40. date_format
+Note: this does not work on messages that are encrypted and signed! (Crypto
+only)
+
+3.42. crypt_replysignencrypted
+
+Type: boolean
+Default: no
+
+If set, automatically PGP or OpenSSL sign replies to messages which are
+encrypted. This makes sense in combination with $crypt_replyencrypt, because it
+allows you to sign all messages which are automatically encrypted. This works
+around the problem noted in $crypt_replysign, that mutt is not able to find out
+whether an encrypted message is also signed. (Crypto only)
+
+3.43. crypt_timestamp
+
+Type: boolean
+Default: yes
+
+If set, mutt will include a time stamp in the lines surrounding PGP or S/MIME
+output, so spoofing such lines is more difficult. If you are using colors to
+mark these lines, and rely on these, you may unset this setting. (Crypto only)
+
+3.44. crypt_use_gpgme
+
+Type: boolean
+Default: no
+
+This variable controls the use of the GPGME-enabled crypto backends. If it is
+set and Mutt was built with gpgme support, the gpgme code for S/MIME and PGP
+will be used instead of the classic code. Note that you need to set this option
+in .muttrc; it won't have any effect when used interactively.
+
+3.45. crypt_use_pka
+
+Type: boolean
+Default: no
+
+Controls whether mutt uses PKA (see http://www.g10code.de/docs/
+pka-intro.de.pdf) during signature verification (only supported by the GPGME
+backend).
+
+3.46. crypt_verify_sig
+
+Type: quadoption
+Default: yes
+
+If ?yes?, always attempt to verify PGP or S/MIME signatures. If ?ask-*?, ask
+whether or not to verify the signature. If \Fi?no?, never attempt to verify
+cryptographic signatures. (Crypto only)
+
+3.47. date_format

 
 Type: string
 
 Type: string

-Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
+Default: ?!%a, %b %d, %Y at %I:%M:%S%p %Z?

 
 

-This variable controls the format of the date printed by the ``%d'' sequence in
-``$index_format''. This is passed to the strftime call to process the date. See
-the man page for strftime(3) for the proper syntax.
+This variable controls the format of the date printed by the ?%d? sequence in
+$index_format. This is passed to the strftime(3) function to process the date,
+see the man page for the proper syntax.

 
 

-Unless the first character in the string is a bang (``!''), the month and week
-day names are expanded according to the locale specified in the variable ``
-$locale''. If the first character in the string is a bang, the bang is
-discarded, and the month and week day names in the rest of the string are
-expanded in the C locale (that is in US English).
+Unless the first character in the string is a bang (?!?), the month and week
+day names are expanded according to the locale specified in the variable
+$locale. If the first character in the string is a bang, the bang is discarded,
+and the month and week day names in the rest of the string are expanded in the
+C locale (that is in US English).

 
 

-3.41. default_hook
+3.48. default_hook

 
 Type: string
 
 Type: string

-Default: "~f %s !~P | (~P ~C %s)"
+Default: ??f %s !?P | (?P ?C %s)?
+
+This variable controls how ?message-hook?, ?reply-hook?, ?send-hook?, ?
+send2-hook?, ?save-hook?, and ?fcc-hook? will be interpreted if they are
+specified with only a simple regexp, instead of a matching pattern. The hooks
+are expanded when they are declared, so a hook will be interpreted according to
+the value of this variable at the time the hook is declared.

 
 

-This variable controls how message-hooks, reply-hooks, send-hooks, send2-hooks,
-save-hooks, and fcc-hooks will be interpreted if they are specified with only a
-simple regexp, instead of a matching pattern. The hooks are expanded when they
-are declared, so a hook will be interpreted according to the value of this
-variable at the time the hook is declared. The default value matches if the
-message is either from a user matching the regular expression given, or if it
-is from you (if the from address matches ``alternates'') and is to or cc'ed to
-a user matching the given regular expression.
+The default value matches if the message is either from a user matching the
+regular expression given, or if it is from you (if the from address matches ?
+alternates?) and is to or cc'ed to a user matching the given regular
+expression.

 
 

-3.42. delete
+3.49. delete

 
 Type: quadoption
 Default: ask-yes
 
 Type: quadoption
 Default: ask-yes


@@ -5522,7 +6462,7 @@ synchronizing a mailbox. If set to yes, messages marked for deleting will
 automatically be purged without prompting. If set to no, messages marked for
 deletion will be kept in the mailbox.
 
 automatically be purged without prompting. If set to no, messages marked for
 deletion will be kept in the mailbox.
 

-3.43. delete_untag
+3.50. delete_untag

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -5531,35 +6471,35 @@ If this option is set, mutt will untag messages when marking them for deletion.
 This applies when you either explicitly delete a message, or when you save it
 to another folder.
 
 This applies when you either explicitly delete a message, or when you save it
 to another folder.
 

-3.44. digest_collapse
+3.51. digest_collapse

 
 Type: boolean
 Default: yes
 
 If this option is set, mutt's received-attachments menu will not show the
 subparts of individual messages in a multipart/digest. To see these subparts,
 
 Type: boolean
 Default: yes
 
 If this option is set, mutt's received-attachments menu will not show the
 subparts of individual messages in a multipart/digest. To see these subparts,

-press 'v' on that menu.
+press ?v? on that menu.

 
 

-3.45. display_filter
+3.52. display_filter

 
 Type: path
 
 Type: path

-Default: ""
+Default: (empty)

 
 When set, specifies a command used to filter messages. When a message is viewed
 it is passed as standard input to $display_filter, and the filtered message is
 read from the standard output.
 
 
 When set, specifies a command used to filter messages. When a message is viewed
 it is passed as standard input to $display_filter, and the filtered message is
 read from the standard output.
 

-3.46. dotlock_program
+3.53. dotlock_program

 
 Type: path
 
 Type: path

-Default: "/usr/local/bin/mutt_dotlock"
+Default: ?/usr/local/bin/mutt_dotlock?

 
 

-Contains the path of the mutt_dotlock (8) binary to be used by mutt.
+Contains the path of the mutt_dotlock(8) binary to be used by mutt.

 
 

-3.47. dsn_notify
+3.54. dsn_notify

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 This variable sets the request for when notification is returned. The string
 consists of a comma separated list (no spaces!) of one or more of the
 
 This variable sets the request for when notification is returned. The string
 consists of a comma separated list (no spaces!) of one or more of the


@@ -5567,40 +6507,46 @@ following: never, to never request notification, failure, to request
 notification on transmission failure, delay, to be notified of message delays,
 success, to be notified of successful transmission.
 
 notification on transmission failure, delay, to be notified of message delays,
 success, to be notified of successful transmission.
 

-Example: set dsn_notify="failure,delay"
+Example:
+
+set dsn_notify="failure,delay"

 
 Note: when using $sendmail for delivery, you should not enable this unless you
 are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)
 
 Note: when using $sendmail for delivery, you should not enable this unless you
 are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)

--compatible interface supporting the -N option for DSN. For SMTP delivery, it
-depends on the server whether DSN is supported or not.
+-compatible interface supporting the -N option for DSN. For SMTP delivery, DSN
+support is autodetected so that it depends on the server whether DSN will be
+used or not.

 
 

-3.48. dsn_return
+3.55. dsn_return

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 This variable controls how much of your message is returned in DSN messages. It
 may be set to either hdrs to return just the message header, or full to return
 the full message.
 
 
 This variable controls how much of your message is returned in DSN messages. It
 may be set to either hdrs to return just the message header, or full to return
 the full message.
 

-Example: set dsn_return=hdrs
+Example:
+
+set dsn_return=hdrs

 
 Note: when using $sendmail for delivery, you should not enable this unless you
 are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)
 
 Note: when using $sendmail for delivery, you should not enable this unless you
 are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)

--compatible interface supporting the -R option for DSN. For SMTP delivery, it
-depends on the server whether DSN is supported or not.
+-compatible interface supporting the -R option for DSN. For SMTP delivery, DSN
+support is autodetected so that it depends on the server whether DSN will be
+used or not.

 
 

-3.49. duplicate_threads
+3.56. duplicate_threads

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-This variable controls whether mutt, when sorting by threads, threads messages
-with the same message-id together. If it is set, it will indicate that it
-thinks they are duplicates of each other with an equals sign in the thread
-diagram.
+This variable controls whether mutt, when $sort is set to threads, threads
+messages with the same Message-Id together. If it is set, it will indicate that
+it thinks they are duplicates of each other with an equals sign in the thread
+tree.

 
 

-3.50. edit_headers
+3.57. edit_headers

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -5611,40 +6557,50 @@ the body of your message.
 Note that changes made to the References: and Date: headers are ignored for
 interoperability reasons.
 
 Note that changes made to the References: and Date: headers are ignored for
 interoperability reasons.
 

-3.51. editor
+3.58. editor

 
 Type: path
 
 Type: path

-Default: ""
+Default: (empty)

 
 This variable specifies which editor is used by mutt. It defaults to the value
 
 This variable specifies which editor is used by mutt. It defaults to the value

-of the VISUAL, or EDITOR, environment variable, or to the string "vi" if
+of the $VISUAL, or $EDITOR, environment variable, or to the string ?vi? if

 neither of those are set.
 
 neither of those are set.
 

-3.52. encode_from
+3.59. encode_from

 
 Type: boolean
 Default: no
 
 When set, mutt will quoted-printable encode messages when they contain the
 
 Type: boolean
 Default: no
 
 When set, mutt will quoted-printable encode messages when they contain the

-string "From " in the beginning of a line. Useful to avoid the tampering
-certain mail delivery and transport agents tend to do with messages.
+string ?From ? (note the trailing space) in the beginning of a line. This is
+useful to avoid the tampering certain mail delivery and transport agents tend
+to do with messages (in order to prevent tools from misinterpreting the line as
+a mbox message separator).
+
+3.60. entropy_file
+
+Type: path
+Default: (empty)
+
+The file which includes random data that is used to initialize SSL library
+functions.

 
 

-3.53. envelope_from_address
+3.61. envelope_from_address

 
 Type: e-mail address
 
 Type: e-mail address

-Default: ""
+Default: (empty)

 
 Manually sets the envelope sender for outgoing messages. This value is ignored
 
 Manually sets the envelope sender for outgoing messages. This value is ignored

-if ``$use_envelope_from'' is unset.
+if $use_envelope_from is unset.

 
 

-3.54. escape
+3.62. escape

 
 Type: string
 
 Type: string

-Default: "~"
+Default: ???

 
 Escape character to use for functions in the builtin editor.
 
 
 Escape character to use for functions in the builtin editor.
 

-3.55. fast_reply
+3.63. fast_reply

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -5653,17 +6609,17 @@ When set, the initial prompt for recipients and subject are skipped when
 replying to messages, and the initial prompt for subject is skipped when
 forwarding messages.
 
 replying to messages, and the initial prompt for subject is skipped when
 forwarding messages.
 

-Note: this variable has no effect when the ``$autoedit'' variable is set.
+Note: this variable has no effect when the $autoedit variable is set.

 
 

-3.56. fcc_attach
+3.64. fcc_attach

 
 

-Type: boolean
+Type: quadoption

 Default: yes
 
 This variable controls whether or not attachments on outgoing messages are
 saved along with the main body of your message.
 
 Default: yes
 
 This variable controls whether or not attachments on outgoing messages are
 saved along with the main body of your message.
 

-3.57. fcc_clear
+3.65. fcc_clear

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -5671,191 +6627,212 @@ Default: no
 When this variable is set, FCCs will be stored unencrypted and unsigned, even
 when the actual message is encrypted and/or signed. (PGP only)
 
 When this variable is set, FCCs will be stored unencrypted and unsigned, even
 when the actual message is encrypted and/or signed. (PGP only)
 

-3.58. folder
+3.66. folder

 
 Type: path
 
 Type: path

-Default: "~/Mail"
+Default: ??/Mail?

 
 

-Specifies the default location of your mailboxes. A `+' or `=' at the beginning
+Specifies the default location of your mailboxes. A ?+? or ?=? at the beginning

 of a pathname will be expanded to the value of this variable. Note that if you
 of a pathname will be expanded to the value of this variable. Note that if you

-change this variable from the default value you need to make sure that the
-assignment occurs before you use `+' or `=' for any other variables since
-expansion takes place during the `set' command.
+change this variable (from the default) value you need to make sure that the
+assignment occurs before you use ?+? or ?=? for any other variables since
+expansion takes place when handling the ?mailboxes? command.

 
 

-3.59. folder_format
+3.67. folder_format

 
 Type: string
 
 Type: string

-Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
+Default: ?%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f?

 
 This variable allows you to customize the file browser display to your personal
 
 This variable allows you to customize the file browser display to your personal

-taste. This string is similar to ``$index_format'', but has its own set of
-printf()-like sequences:
-
-%C
-
-    current file number
-
-%d
-
-    date/time folder was last modified
-
-%f
-
-    filename
-
-%F
-
-    file permissions
-
-%g
-
-    group name (or numeric gid, if missing)
-
-%l
-
-    number of hard links
-
-%N
-
-    N if folder has new mail, blank otherwise
-
-%s
-
-    size in bytes
-
-%t
-
-    * if the file is tagged, blank otherwise
-
-%u
-
-    owner name (or numeric uid, if missing)
-
-%>X
-
-    right justify the rest of the string and pad with character "X"
-
-%|X
-
-    pad to the end of the line with character "X"
-
-%*X
-
-    soft-fill with character "X" as pad
-
-For an explanation of `soft-fill', see the ``$index_format'' documentation.
-
-3.60. followup_to
+taste. This string is similar to $index_format, but has its own set of printf
+(3)-like sequences:
+
++-----------------------------------------------------------------------------+
+|%C |current file number                                                      |
+|---+-------------------------------------------------------------------------|
+|%d |date/time folder was last modified                                       |
+|---+-------------------------------------------------------------------------|
+|%f |filename (?/? is appended to directory names, ?@? to symbolic links and  |
+|   |?*? to executable files)                                                 |
+|---+-------------------------------------------------------------------------|
+|%F |file permissions                                                         |
+|---+-------------------------------------------------------------------------|
+|%g |group name (or numeric gid, if missing)                                  |
+|---+-------------------------------------------------------------------------|
+|%l |number of hard links                                                     |
+|---+-------------------------------------------------------------------------|
+|%N |N if folder has new mail, blank otherwise                                |
+|---+-------------------------------------------------------------------------|
+|%s |size in bytes                                                            |
+|---+-------------------------------------------------------------------------|
+|%t |?*? if the file is tagged, blank otherwise                               |
+|---+-------------------------------------------------------------------------|
+|%u |owner name (or numeric uid, if missing)                                  |
+|---+-------------------------------------------------------------------------|
+|%>X|right justify the rest of the string and pad with character ?X?          |
+|---+-------------------------------------------------------------------------|
+|%|X|pad to the end of the line with character ?X?                            |
+|---+-------------------------------------------------------------------------|
+|%*X|soft-fill with character ?X? as pad                                      |
++-----------------------------------------------------------------------------+
+
+For an explanation of ?soft-fill?, see the $index_format documentation.
+
+3.68. followup_to

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-Controls whether or not the Mail-Followup-To header field is generated when
+Controls whether or not the ?Mail-Followup-To:? header field is generated when

 sending mail. When set, Mutt will generate this field when you are replying to
 sending mail. When set, Mutt will generate this field when you are replying to

-a known mailing list, specified with the ``subscribe'' or ``lists'' commands.
+a known mailing list, specified with the ?subscribe? or ?lists? commands.

 
 This field has two purposes. First, preventing you from receiving duplicate
 copies of replies to messages which you send to mailing lists, and second,
 ensuring that you do get a reply separately for any messages sent to known
 
 This field has two purposes. First, preventing you from receiving duplicate
 copies of replies to messages which you send to mailing lists, and second,
 ensuring that you do get a reply separately for any messages sent to known

-lists to which you are not subscribed. The header will contain only the list's
-address for subscribed lists, and both the list address and your own email
-address for unsubscribed lists. Without this header, a group reply to your
-message sent to a subscribed list will be sent to both the list and your
-address, resulting in two copies of the same email for you.
+lists to which you are not subscribed.

 
 

-3.61. force_name
+The header will contain only the list's address for subscribed lists, and both
+the list address and your own email address for unsubscribed lists. Without
+this header, a group reply to your message sent to a subscribed list will be
+sent to both the list and your address, resulting in two copies of the same
+email for you.
+
+3.69. force_name

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-This variable is similar to ``$save_name'', except that Mutt will store a copy
-of your outgoing message by the username of the address you are sending to even
-if that mailbox does not exist.
+This variable is similar to $save_name, except that Mutt will store a copy of
+your outgoing message by the username of the address you are sending to even if
+that mailbox does not exist.

 
 

-Also see the ``$record'' variable.
+Also see the $record variable.

 
 

-3.62. forward_decode
+3.70. forward_decode

 
 Type: boolean
 Default: yes
 
 Controls the decoding of complex MIME messages into text/plain when forwarding
 a message. The message header is also RFC2047 decoded. This variable is only
 
 Type: boolean
 Default: yes
 
 Controls the decoding of complex MIME messages into text/plain when forwarding
 a message. The message header is also RFC2047 decoded. This variable is only

-used, if ``$mime_forward'' is unset, otherwise ``$mime_forward_decode'' is used
+used, if $mime_forward is unset, otherwise $mime_forward_decode is used

 instead.
 
 instead.
 

-3.63. forward_edit
+3.71. forward_decrypt
+
+Type: boolean
+Default: yes
+
+Controls the handling of encrypted messages when forwarding a message. When set
+, the outer layer of encryption is stripped off. This variable is only used if
+$mime_forward is set and $mime_forward_decode is unset. (PGP only)
+
+3.72. forward_edit

 
 Type: quadoption
 Default: yes
 
 This quadoption controls whether or not the user is automatically placed in the
 editor when forwarding messages. For those who always want to forward with no
 
 Type: quadoption
 Default: yes
 
 This quadoption controls whether or not the user is automatically placed in the
 editor when forwarding messages. For those who always want to forward with no

-modification, use a setting of ``no''.
+modification, use a setting of ?no?.

 
 

-3.64. forward_format
+3.73. forward_format

 
 Type: string
 
 Type: string

-Default: "[%a: %s]"
+Default: ?[%a: %s]?

 
 This variable controls the default subject when forwarding a message. It uses
 
 This variable controls the default subject when forwarding a message. It uses

-the same format sequences as the ``$index_format'' variable.
+the same format sequences as the $index_format variable.

 
 

-3.65. forward_quote
+3.74. forward_quote

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-When set forwarded messages included in the main body of the message (when ``
-$mime_forward'' is unset) will be quoted using ``$indent_string''.
+When set, forwarded messages included in the main body of the message (when
+$mime_forward is unset) will be quoted using $indent_string.

 
 

-3.66. from
+3.75. from

 
 Type: e-mail address
 
 Type: e-mail address

-Default: ""
+Default: (empty)

 
 When set, this variable contains a default from address. It can be overridden
 
 When set, this variable contains a default from address. It can be overridden

-using my_hdr (including from send-hooks) and ``$reverse_name''. This variable
-is ignored if ``$use_from'' is unset.
+using ?my_hdr? (including from a ?send-hook?) and $reverse_name. This variable
+is ignored if $use_from is unset.

 
 

-Defaults to the contents of the environment variable EMAIL.
+This setting defaults to the contents of the environment variable $EMAIL.

 
 

-3.67. gecos_mask
+3.76. gecos_mask

 
 Type: regular expression
 
 Type: regular expression

-Default: "^[^,]*"
+Default: ?^[^,]*?

 
 A regular expression used by mutt to parse the GECOS field of a password entry
 
 A regular expression used by mutt to parse the GECOS field of a password entry

-when expanding the alias. By default the regular expression is set to "^[^,]*"
-which will return the string up to the first "," encountered. If the GECOS
-field contains a string like "lastname, firstname" then you should set the
-gecos_mask=".*".
+when expanding the alias. The default value will return the string up to the
+first ?,? encountered. If the GECOS field contains a string like ?lastname,
+firstname? then you should set it to ?.*?.

 
 

-This can be useful if you see the following behavior: you address a e-mail to
-user ID stevef whose full name is Steve Franklin. If mutt expands stevef to
-"Franklin" stevef@foo.bar then you should set the gecos_mask to a regular
-expression that will match the whole name so mutt will expand "Franklin" to
-"Franklin, Steve".
+This can be useful if you see the following behavior: you address an e-mail to
+user ID ?stevef? whose full name is ?Steve Franklin?. If mutt expands ?stevef?
+to ?"Franklin" stevef@foo.bar? then you should set the $gecos_mask to a regular
+expression that will match the whole name so mutt will expand ?Franklin? to
+?Franklin, Steve?.

 
 

-3.68. hdrs
+3.77. hdrs

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-When unset, the header fields normally added by the ``my_hdr'' command are not
+When unset, the header fields normally added by the ?my_hdr? command are not

 created. This variable must be unset before composing a new message or replying
 in order to take effect. If set, the user defined header fields are added to
 every new message.
 
 created. This variable must be unset before composing a new message or replying
 in order to take effect. If set, the user defined header fields are added to
 every new message.
 

-3.69. header
+3.78. header

 
 Type: boolean
 Default: no
 
 When set, this variable causes Mutt to include the header of the message you
 
 Type: boolean
 Default: no
 
 When set, this variable causes Mutt to include the header of the message you

-are replying to into the edit buffer. The ``$weed'' setting applies.
+are replying to into the edit buffer. The $weed setting applies.
+
+3.79. header_cache
+
+Type: path
+Default: (empty)
+
+This variable points to the header cache database. If pointing to a directory
+Mutt will contain a header cache database file per folder, if pointing to a
+file that file will be a single global header cache. By default it is unset so
+no header caching will be used.
+
+Header caching can greatly improve speed when opening POP, IMAP MH or Maildir
+folders, see ?caching? for details.
+
+3.80. header_cache_compress

 
 

-3.70. help
+Type: boolean
+Default: yes
+
+When mutt is compiled with qdbm or tokyocabinet as header cache backend, this
+option determines whether the database will be compressed. Compression results
+in database files roughly being one fifth of the usual diskspace, but the
+uncompression can result in a slower opening of cached folder(s) which in
+general is still much faster than opening non header cached folders.
+
+3.81. header_cache_pagesize
+
+Type: string
+Default: ?16384?
+
+When mutt is compiled with either gdbm or bdb4 as the header cache backend,
+this option changes the database page size. Too large or too small values can
+waste space, memory, or CPU time. The default should be more or less optimal
+for most use cases.
+
+3.82. help

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -5868,17 +6845,16 @@ sequence rather than a single keystroke. Also, the help line may not be updated
 if a binding is changed while Mutt is running. Since this variable is primarily
 aimed at new users, neither of these should present a major problem.
 
 if a binding is changed while Mutt is running. Since this variable is primarily
 aimed at new users, neither of these should present a major problem.
 

-3.71. hidden_host
+3.83. hidden_host

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-When set, mutt will skip the host name part of ``$hostname'' variable when
-adding the domain part to addresses. This variable does not affect the
-generation of Message-IDs, and it will not lead to the cut-off of first-level
-domains.
+When set, mutt will skip the host name part of $hostname variable when adding
+the domain part to addresses. This variable does not affect the generation of
+Message-IDs, and it will not lead to the cut-off of first-level domains.

 
 

-3.72. hide_limited
+3.84. hide_limited

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -5886,7 +6862,7 @@ Default: no
 When set, mutt will not show the presence of messages that are hidden by
 limiting, in the thread tree.
 
 When set, mutt will not show the presence of messages that are hidden by
 limiting, in the thread tree.
 

-3.73. hide_missing
+3.85. hide_missing

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -5894,7 +6870,7 @@ Default: yes
 When set, mutt will not show the presence of missing messages in the thread
 tree.
 
 When set, mutt will not show the presence of missing messages in the thread
 tree.
 

-3.74. hide_thread_subject
+3.86. hide_thread_subject

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -5902,7 +6878,7 @@ Default: yes
 When set, mutt will not show the subject of messages in the thread tree that
 have the same subject as their parent or closest previously displayed sibling.
 
 When set, mutt will not show the subject of messages in the thread tree that
 have the same subject as their parent or closest previously displayed sibling.
 

-3.75. hide_top_limited
+3.87. hide_top_limited

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -5911,7 +6887,7 @@ When set, mutt will not show the presence of messages that are hidden by
 limiting, at the top of threads in the thread tree. Note that when
 $hide_limited is set, this option will have no effect.
 
 limiting, at the top of threads in the thread tree. Note that when
 $hide_limited is set, this option will have no effect.
 

-3.76. hide_top_missing
+3.88. hide_top_missing

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -5920,22 +6896,35 @@ When set, mutt will not show the presence of missing messages at the top of
 threads in the thread tree. Note that when $hide_missing is set, this option
 will have no effect.
 
 threads in the thread tree. Note that when $hide_missing is set, this option
 will have no effect.
 

-3.77. history
+3.89. history

 
 Type: number
 Default: 10
 
 This variable controls the size (in number of strings remembered) of the string
 
 Type: number
 Default: 10
 
 This variable controls the size (in number of strings remembered) of the string

-history buffer. The buffer is cleared each time the variable is set.
+history buffer per category. The buffer is cleared each time the variable is
+set.

 
 

-3.78. history_file
+3.90. history_file

 
 Type: path
 
 Type: path

-Default: "~/.mutthistory"
+Default: ??/.mutthistory?

 
 The file in which Mutt will save its history.
 
 
 The file in which Mutt will save its history.
 

-3.79. honor_followup_to
+3.91. honor_disposition
+
+Type: boolean
+Default: no
+
+When set, Mutt will not display attachments with a disposition of ?attachment?
+inline even if it could render the part to plain text. These MIME parts can
+only be viewed from the attachment menu.
+
+If unset, Mutt will render all MIME parts it can properly transform to plain
+text.
+
+3.92. honor_followup_to

 
 Type: quadoption
 Default: yes
 
 Type: quadoption
 Default: yes


@@ -5943,95 +6932,101 @@ Default: yes
 This variable controls whether or not a Mail-Followup-To header is honored when
 group-replying to a message.
 
 This variable controls whether or not a Mail-Followup-To header is honored when
 group-replying to a message.
 

-3.80. hostname
+3.93. hostname

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 Specifies the fully-qualified hostname of the system mutt is running on
 containing the host's name and the DNS domain it belongs to. It is used as the
 
 Specifies the fully-qualified hostname of the system mutt is running on
 containing the host's name and the DNS domain it belongs to. It is used as the

-domain part (after ``@'') for local email addresses as well as Message-Id
+domain part (after ?@?) for local email addresses as well as Message-Id

 headers.
 
 Its value is determined at startup as follows: If the node's name as returned
 by the uname(3) function contains the hostname and the domain, these are used
 to construct $hostname. If there is no domain part returned, Mutt will look for
 headers.
 
 Its value is determined at startup as follows: If the node's name as returned
 by the uname(3) function contains the hostname and the domain, these are used
 to construct $hostname. If there is no domain part returned, Mutt will look for

-a ``domain'' or ``search'' line in /etc/resolv.conf to determine the domain.
+a ?domain? or ?search? line in /etc/resolv.conf to determine the domain.

 Optionally, Mutt can be compiled with a fixed domain name in which case a
 detected one is not used.
 
 Optionally, Mutt can be compiled with a fixed domain name in which case a
 detected one is not used.
 

-Also see ``$use_domain'' and ``$hidden_host''.
+Also see $use_domain and $hidden_host.

 
 

-3.81. ignore_linear_white_space
+3.94. ignore_linear_white_space

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-This option replaces linear-white-space between encoded-word and *text to a
-single space to prevent the display of MIME-encoded ``Subject'' field from
-being divided into multiple lines.
+This option replaces linear-white-space between encoded-word and text to a
+single space to prevent the display of MIME-encoded ?Subject:? field from being
+divided into multiple lines.

 
 

-3.82. ignore_list_reply_to
+3.95. ignore_list_reply_to

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-Affects the behaviour of the reply function when replying to messages from
-mailing lists (as defined by the ``subscribe'' or ``lists'' commands). When
-set, if the ``Reply-To:'' field is set to the same value as the ``To:'' field,
-Mutt assumes that the ``Reply-To:'' field was set by the mailing list to
-automate responses to the list, and will ignore this field. To direct a
-response to the mailing list when this option is set, use the list-reply
-function; group-reply will reply to both the sender and the list.
+Affects the behaviour of the <reply> function when replying to messages from
+mailing lists (as defined by the ?subscribe? or ?lists? commands). When set, if
+the ?Reply-To:? field is set to the same value as the ?To:? field, Mutt assumes
+that the ?Reply-To:? field was set by the mailing list to automate responses to
+the list, and will ignore this field. To direct a response to the mailing list
+when this option is set, use the <list-reply> function; <group-reply> will
+reply to both the sender and the list.

 
 

-3.83. imap_authenticators
+3.96. imap_authenticators

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 This is a colon-delimited list of authentication methods mutt may attempt to
 use to log in to an IMAP server, in the order mutt should try them.
 
 This is a colon-delimited list of authentication methods mutt may attempt to
 use to log in to an IMAP server, in the order mutt should try them.

-Authentication methods are either 'login' or the right side of an IMAP 'AUTH=
-xxx' capability string, eg 'digest-md5', 'gssapi' or 'cram-md5'. This parameter
-is case-insensitive. If this parameter is unset (the default) mutt will try all
-available methods, in order from most-secure to least-secure.
+Authentication methods are either ?login? or the right side of an IMAP ?AUTH=
+xxx? capability string, eg ?digest-md5?, ?gssapi? or ?cram-md5?. This option is
+case-insensitive. If it's unset (the default) mutt will try all available
+methods, in order from most-secure to least-secure.
+
+Example:

 
 

-Example: set imap_authenticators="gssapi:cram-md5:login"
+set imap_authenticators="gssapi:cram-md5:login"

 
 Note: Mutt will only fall back to other authentication methods if the previous
 methods are unavailable. If a method is available but authentication fails,
 mutt will not connect to the IMAP server.
 
 
 Note: Mutt will only fall back to other authentication methods if the previous
 methods are unavailable. If a method is available but authentication fails,
 mutt will not connect to the IMAP server.
 

-3.84. imap_check_subscribed
+3.97. imap_check_subscribed

 
 Type: boolean
 Default: no
 
 When set, mutt will fetch the set of subscribed folders from your server on
 
 Type: boolean
 Default: no
 
 When set, mutt will fetch the set of subscribed folders from your server on

-connection, and add them to the set of mailboxes it polls for new mail. See
-also the ``mailboxes'' command.
+connection, and add them to the set of mailboxes it polls for new mail just as
+if you had issued individual ?mailboxes? commands.

 
 

-3.85. imap_delim_chars
+3.98. imap_delim_chars

 
 Type: string
 
 Type: string

-Default: "/."
+Default: ?/.?

 
 This contains the list of characters which you would like to treat as folder
 
 This contains the list of characters which you would like to treat as folder

-separators for displaying IMAP paths. In particular it helps in using the '='
+separators for displaying IMAP paths. In particular it helps in using the ?=?

 shortcut for your folder variable.
 
 shortcut for your folder variable.
 

-3.86. imap_headers
+3.99. imap_headers

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 

-Mutt requests these header fields in addition to the default headers ("DATE
-FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE CONTENT-DESCRIPTION
-IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP servers before displaying the
-index menu. You may want to add more headers for spam detection. Note: This is
-a space separated list.
+Mutt requests these header fields in addition to the default headers (?Date:?,
+?From:?, ?Subject:?, ?To:?, ?Cc:?, ?Message-Id:?, ?References:?,
+?Content-Type:?, ?Content-Description:?, ?In-Reply-To:?, ?Reply-To:?, ?Lines:?,
+?List-Post:?, ?X-Label:?) from IMAP servers before displaying the index menu.
+You may want to add more headers for spam detection.

 
 

-3.87. imap_idle
+Note: This is a space separated list, items should be uppercase and not contain
+the colon, e.g. ?X-BOGOSITY X-SPAM-STATUS? for the ?X-Bogosity:? and
+?X-Spam-Status:? header fields.
+
+3.100. imap_idle

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -6041,7 +7036,7 @@ mail in the current mailbox. Some servers (dovecot was the inspiration for this
 option) react badly to mutt's implementation. If your connection seems to
 freeze up periodically, try unsetting this.
 
 option) react badly to mutt's implementation. If your connection seems to
 freeze up periodically, try unsetting this.
 

-3.88. imap_keepalive
+3.101. imap_keepalive

 
 Type: number
 Default: 900
 
 Type: number
 Default: 900


@@ -6054,36 +7049,38 @@ do this, but in practice the RFC does get violated every now and then. Reduce
 this number if you find yourself getting disconnected from your IMAP server due
 to inactivity.
 
 this number if you find yourself getting disconnected from your IMAP server due
 to inactivity.
 

-3.89. imap_list_subscribed
+3.102. imap_list_subscribed

 
 Type: boolean
 Default: no
 
 This variable configures whether IMAP folder browsing will look for only
 subscribed folders or all folders. This can be toggled in the IMAP browser with
 
 Type: boolean
 Default: no
 
 This variable configures whether IMAP folder browsing will look for only
 subscribed folders or all folders. This can be toggled in the IMAP browser with

-the toggle-subscribed function.
+the <toggle-subscribed> function.

 
 

-3.90. imap_login
+3.103. imap_login

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 Your login name on the IMAP server.
 
 
 Your login name on the IMAP server.
 

-This variable defaults to the value of imap_user.
+This variable defaults to the value of $imap_user.

 
 

-3.91. imap_pass
+3.104. imap_pass

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 Specifies the password for your IMAP account. If unset, Mutt will prompt you
 
 Specifies the password for your IMAP account. If unset, Mutt will prompt you

-for your password when you invoke the fetch-mail function. Warning: you should
-only use this option when you are on a fairly secure machine, because the
-superuser can read your muttrc even if you are the only one who can read the
-file.
+for your password when you invoke the <imap-fetch-mail> function or try to open
+an IMAP folder.
+
+Warning: you should only use this option when you are on a fairly secure
+machine, because the superuser can read your muttrc even if you are the only
+one who can read the file.

 
 

-3.92. imap_passive
+3.105. imap_passive

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -6093,7 +7090,7 @@ will only check for new mail over existing IMAP connections. This is useful if
 you don't want to be prompted to user/password pairs on mutt invocation, or if
 opening the connection is slow.
 
 you don't want to be prompted to user/password pairs on mutt invocation, or if
 opening the connection is slow.
 

-3.93. imap_peek
+3.106. imap_peek

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -6103,7 +7100,20 @@ fetch a message from the server. This is generally a good thing, but can make
 closing an IMAP folder somewhat slower. This option exists to appease speed
 freaks.
 
 closing an IMAP folder somewhat slower. This option exists to appease speed
 freaks.
 

-3.94. imap_servernoise
+3.107. imap_pipeline_depth
+
+Type: number
+Default: 15
+
+Controls the number of IMAP commands that may be queued up before they are sent
+to the server. A deeper pipeline reduces the amount of time mutt must wait for
+the server, and can make IMAP servers feel much more responsive. But not all
+servers correctly handle pipelined commands, so if you have problems you might
+want to try setting this variable to 0.
+
+Note: Changes to this variable have no effect on open connections.
+
+3.108. imap_servernoise

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -6113,26 +7123,26 @@ messages. Since these messages are often harmless, or generated due to
 configuration problems on the server which are out of the users' hands, you may
 wish to suppress them at some point.
 
 configuration problems on the server which are out of the users' hands, you may
 wish to suppress them at some point.
 

-3.95. imap_user
+3.109. imap_user

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 The name of the user whose mail you intend to access on the IMAP server.
 
 This variable defaults to your user name on the local machine.
 
 
 The name of the user whose mail you intend to access on the IMAP server.
 
 This variable defaults to your user name on the local machine.
 

-3.96. implicit_autoview
+3.110. implicit_autoview

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-If set to ``yes'', mutt will look for a mailcap entry with the copiousoutput
+If set to ?yes?, mutt will look for a mailcap entry with the ?copiousoutput?

 flag set for every MIME attachment it doesn't have an internal viewer defined
 for. If such an entry is found, mutt will use the viewer defined in that entry
 to convert the body part to text form.
 
 flag set for every MIME attachment it doesn't have an internal viewer defined
 for. If such an entry is found, mutt will use the viewer defined in that entry
 to convert the body part to text form.
 

-3.97. include
+3.111. include

 
 Type: quadoption
 Default: ask-yes
 
 Type: quadoption
 Default: ask-yes


@@ -6140,7 +7150,7 @@ Default: ask-yes
 Controls whether or not a copy of the message(s) you are replying to is
 included in your reply.
 
 Controls whether or not a copy of the message(s) you are replying to is
 included in your reply.
 

-3.98. include_onlyfirst
+3.112. include_onlyfirst

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -6148,254 +7158,180 @@ Default: no
 Controls whether or not Mutt includes only the first attachment of the message
 you are replying.
 
 Controls whether or not Mutt includes only the first attachment of the message
 you are replying.
 

-3.99. indent_string
+3.113. indent_string

 
 Type: string
 
 Type: string

-Default: "> "
+Default: ?> ?

 
 Specifies the string to prepend to each line of text quoted in a message to
 which you are replying. You are strongly encouraged not to change this value,
 as it tends to agitate the more fanatical netizens.
 
 
 Specifies the string to prepend to each line of text quoted in a message to
 which you are replying. You are strongly encouraged not to change this value,
 as it tends to agitate the more fanatical netizens.
 

-This option is a format string, please see the description of ``$index_format''
-for supported printf()-style sequences.
+The value of this option is ignored if $text_flowed is set, too because the
+quoting mechanism is strictly defined for format=flowed.
+
+This option is a format string, please see the description of $index_format for
+supported printf(3)-style sequences.

 
 

-3.100. index_format
+3.114. index_format

 
 Type: string
 
 Type: string

-Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
+Default: ?%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s?

 
 This variable allows you to customize the message index display to your
 personal taste.
 
 
 This variable allows you to customize the message index display to your
 personal taste.
 

-``Format strings'' are similar to the strings used in the ``C'' function printf
-to format output (see the man page for more detail). The following sequences
-are defined in Mutt:
+?Format strings? are similar to the strings used in the C function printf(3) to
+format output (see the man page for more details). The following sequences are
+defined in Mutt:
+
++-----------------------------------------------------------------------------+
+|%a   |address of the author                                                  |
+|-----+-----------------------------------------------------------------------|
+|%A   |reply-to address (if present; otherwise: address of author)            |
+|-----+-----------------------------------------------------------------------|
+|%b   |filename of the original message folder (think mailbox)                |
+|-----+-----------------------------------------------------------------------|
+|%B   |the list to which the letter was sent, or else the folder name (%b).   |
+|-----+-----------------------------------------------------------------------|
+|%c   |number of characters (bytes) in the message                            |
+|-----+-----------------------------------------------------------------------|
+|%C   |current message number                                                 |
+|-----+-----------------------------------------------------------------------|
+|%d   |date and time of the message in the format specified by $date_format   |
+|     |converted to sender's time zone                                        |
+|-----+-----------------------------------------------------------------------|
+|%D   |date and time of the message in the format specified by $date_format   |
+|     |converted to the local time zone                                       |
+|-----+-----------------------------------------------------------------------|
+|%e   |current message number in thread                                       |
+|-----+-----------------------------------------------------------------------|
+|%E   |number of messages in current thread                                   |
+|-----+-----------------------------------------------------------------------|
+|%f   |sender (address + real name), either From: or Return-Path:             |
+|-----+-----------------------------------------------------------------------|
+|%F   |author name, or recipient name if the message is from you              |
+|-----+-----------------------------------------------------------------------|
+|%H   |spam attribute(s) of this message                                      |
+|-----+-----------------------------------------------------------------------|
+|%i   |message-id of the current message                                      |
+|-----+-----------------------------------------------------------------------|
+|%l   |number of lines in the message (does not work with maildir, mh, and    |
+|     |possibly IMAP folders)                                                 |
+|-----+-----------------------------------------------------------------------|
+|     |If an address in the ?To:? or ?Cc:? header field matches an address    |
+|%L   |defined by the users ?subscribe? command, this displays "To <list-name>|
+|     |", otherwise the same as %F.                                           |
+|-----+-----------------------------------------------------------------------|
+|%m   |total number of message in the mailbox                                 |
+|-----+-----------------------------------------------------------------------|
+|%M   |number of hidden messages if the thread is collapsed.                  |
+|-----+-----------------------------------------------------------------------|
+|%N   |message score                                                          |
+|-----+-----------------------------------------------------------------------|
+|%n   |author's real name (or address if missing)                             |
+|-----+-----------------------------------------------------------------------|
+|%O   |original save folder where mutt would formerly have stashed the        |
+|     |message: list name or recipient name if not sent to a list             |
+|-----+-----------------------------------------------------------------------|
+|%P   |progress indicator for the builtin pager (how much of the file has been|
+|     |displayed)                                                             |
+|-----+-----------------------------------------------------------------------|
+|%s   |subject of the message                                                 |
+|-----+-----------------------------------------------------------------------|
+|%S   |status of the message (?N?/?D?/?d?/?!?/?r?/*)                          |
+|-----+-----------------------------------------------------------------------|
+|%t   |?To:? field (recipients)                                               |
+|-----+-----------------------------------------------------------------------|
+|%T   |the appropriate character from the $to_chars string                    |
+|-----+-----------------------------------------------------------------------|
+|%u   |user (login) name of the author                                        |
+|-----+-----------------------------------------------------------------------|
+|%v   |first name of the author, or the recipient if the message is from you  |
+|-----+-----------------------------------------------------------------------|
+|%X   |number of attachments (please see the ?attachments? section for        |
+|     |possible speed effects)                                                |
+|-----+-----------------------------------------------------------------------|
+|%y   |?X-Label:? field, if present                                           |
+|-----+-----------------------------------------------------------------------|
+|     |?X-Label:? field, if present, and (1) not at part of a thread tree, (2)|
+|%Y   |at the top of a thread, or (3) ?X-Label:? is different from preceding  |
+|     |message's ?X-Label:?.                                                  |
+|-----+-----------------------------------------------------------------------|
+|%Z   |message status flags                                                   |
+|-----+-----------------------------------------------------------------------|
+|%    |the date and time of the message is converted to sender's time zone,   |
+|{fmt}|and ?fmt? is expanded by the library function strftime(3); a leading   |
+|     |bang disables locales                                                  |
+|-----+-----------------------------------------------------------------------|
+|%    |the date and time of the message is converted to the local time zone,  |
+|[fmt]|and ?fmt? is expanded by the library function strftime(3); a leading   |
+|     |bang disables locales                                                  |
+|-----+-----------------------------------------------------------------------|
+|%    |the local date and time when the message was received. ?fmt? is        |
+|(fmt)|expanded by the library function strftime(3); a leading bang disables  |
+|     |locales                                                                |
+|-----+-----------------------------------------------------------------------|
+|%    |the current local time. ?fmt? is expanded by the library function      |
+|<fmt>|strftime(3); a leading bang disables locales.                          |
+|-----+-----------------------------------------------------------------------|
+|%>X  |right justify the rest of the string and pad with character ?X?        |
+|-----+-----------------------------------------------------------------------|
+|%|X  |pad to the end of the line with character ?X?                          |
+|-----+-----------------------------------------------------------------------|
+|%*X  |soft-fill with character ?X? as pad                                    |
++-----------------------------------------------------------------------------+
+
+?Soft-fill? deserves some explanation: Normal right-justification will print
+everything to the left of the ?%>?, displaying padding and whatever lies to the
+right only if there's room. By contrast, soft-fill gives priority to the
+right-hand side, guaranteeing space to display it and showing padding only if
+there's still room. If necessary, soft-fill will eat text leftwards to make
+room for rightward text.

 
 

-%a
+Note that these expandos are supported in ?save-hook?, ?fcc-hook? and ?
+fcc-save-hook?, too.

 
 

-    address of the author
+3.115. ispell

 
 

-%A
-
-    reply-to address (if present; otherwise: address of author)
-
-%b
-
-    filename of the original message folder (think mailBox)
-
-%B
-
-    the list to which the letter was sent, or else the folder name (%b).
-
-%c
-
-    number of characters (bytes) in the message
-
-%C
-
-    current message number
-
-%d
-
-    date and time of the message in the format specified by ``date_format''
-    converted to sender's time zone
-
-%D
-
-    date and time of the message in the format specified by ``date_format''
-    converted to the local time zone
-
-%e
-
-    current message number in thread
-
-%E
-
-    number of messages in current thread
-
-%f
-
-    sender (address + real name), either From: or Return-Path:
-
-%F
-
-    author name, or recipient name if the message is from you
-
-%H
-
-    spam attribute(s) of this message
-
-%i
-
-    message-id of the current message
-
-%l
-
-    number of lines in the message (does not work with maildir, mh, and
-    possibly IMAP folders)
-
-%L
-
-    If an address in the To or CC header field matches an address defined by
-    the users ``subscribe'' command, this displays "To <list-name>", otherwise
-    the same as %F.
-
-%m
-
-    total number of message in the mailbox
-
-%M
-
-    number of hidden messages if the thread is collapsed.
-
-%N
-
-    message score
-
-%n
-
-    author's real name (or address if missing)
-
-%O
-
-    (_O_riginal save folder) Where mutt would formerly have stashed the
-    message: list name or recipient name if no list
-
-%P
-
-    progress indicator for the builtin pager (how much of the file has been
-    displayed)
-
-%s
-
-    subject of the message
-
-%S
-
-    status of the message (N/D/d/!/r/*)
-
-%t
-
-    `to:' field (recipients)
-
-%T
-
-    the appropriate character from the $to_chars string
-
-%u
-
-    user (login) name of the author
-
-%v
-
-    first name of the author, or the recipient if the message is from you
-
-%X
-
-    number of attachments (please see the ``attachments'' section for possible
-    speed effects)
-
-%y
-
-    `x-label:' field, if present
-
-%Y
-
-    `x-label' field, if present, and (1) not at part of a thread tree, (2) at
-    the top of a thread, or (3) `x-label' is different from preceding message's
-    `x-label'.
-
-%Z
-
-    message status flags
-
-%{fmt}
-
-    the date and time of the message is converted to sender's time zone, and
-    ``fmt'' is expanded by the library function ``strftime''; a leading bang
-    disables locales
-
-%[fmt]
-
-    the date and time of the message is converted to the local time zone, and
-    ``fmt'' is expanded by the library function ``strftime''; a leading bang
-    disables locales
-
-%(fmt)
-
-    the local date and time when the message was received. ``fmt'' is expanded
-    by the library function ``strftime''; a leading bang disables locales
-
-%<fmt>
-
-    the current local time. ``fmt'' is expanded by the library function
-    ``strftime''; a leading bang disables locales.
-
-%>X
-
-    right justify the rest of the string and pad with character "X"
-
-%|X
-
-    pad to the end of the line with character "X"
-
-%*X
-
-    soft-fill with character "X" as pad
-
-`Soft-fill' deserves some explanation. Normal right-justification will print
-everything to the left of the %>, displaying padding and the whatever lies to
-the right only if there's room. By contrast, soft-fill gives priority to the
-right-hand side, guaranteeing space to display it and showing padding only if
-there's still room. If necessary, soft-fill will eat text leftwards to make
-room for rightward text.
-
-Note that these expandos are supported in ``save-hook'', ``fcc-hook'' and ``
-fcc-save-hook'', too.
-
-See also: ``$to_chars''.
-
-3.101. ispell
-
-Type: path
-Default: "ispell"
+Type: path
+Default: ?ispell?

 
 How to invoke ispell (GNU's spell-checking software).
 
 
 How to invoke ispell (GNU's spell-checking software).
 

-3.102. keep_flagged
+3.116. keep_flagged

 
 Type: boolean
 Default: no
 
 If set, read messages marked as flagged will not be moved from your spool
 
 Type: boolean
 Default: no
 
 If set, read messages marked as flagged will not be moved from your spool

-mailbox to your ``$mbox'' mailbox, or as a result of a ``mbox-hook'' command.
+mailbox to your $mbox mailbox, or as a result of a ?mbox-hook? command.

 
 

-3.103. locale
+3.117. locale

 
 Type: string
 
 Type: string

-Default: "C"
+Default: ?C?

 
 The locale used by strftime(3) to format dates. Legal values are the strings
 
 The locale used by strftime(3) to format dates. Legal values are the strings

-your system accepts for the locale variable LC_TIME.
+your system accepts for the locale environment variable $LC_TIME.

 
 

-3.104. mail_check
+3.118. mail_check

 
 Type: number
 Default: 5
 
 This variable configures how often (in seconds) mutt should look for new mail.
 
 Type: number
 Default: 5
 
 This variable configures how often (in seconds) mutt should look for new mail.

-Also see the ``$timeout'' variable.
+Also see the $timeout variable.

 
 

-3.105. mailcap_path
+3.119. mailcap_path

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 This variable specifies which files to consult when attempting to display MIME
 bodies not directly supported by Mutt.
 
 
 This variable specifies which files to consult when attempting to display MIME
 bodies not directly supported by Mutt.
 

-3.106. mailcap_sanitize
+3.120. mailcap_sanitize

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -6406,115 +7342,80 @@ sure it doesn't break some more advanced MIME stuff.
 
 DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING!
 
 
 DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING!
 

-3.107. header_cache
-
-Type: path
-Default: ""
-
-The header_cache variable points to the header cache database. If header_cache
-points to a directory it will contain a header cache database per folder. If
-header_cache points to a file that file will be a single global header cache.
-By default it is unset so no header caching will be used.
-
-3.108. maildir_header_cache_verify
+3.121. maildir_header_cache_verify

 
 Type: boolean
 Default: yes
 
 Check for Maildir unaware programs other than mutt having modified maildir
 files when the header cache is in use. This incurs one stat(2) per message
 
 Type: boolean
 Default: yes
 
 Check for Maildir unaware programs other than mutt having modified maildir
 files when the header cache is in use. This incurs one stat(2) per message

-every time the folder is opened.
-
-3.109. header_cache_pagesize
-
-Type: string
-Default: "16384"
+every time the folder is opened (which can be very slow for NFS folders).

 
 

-When mutt is compiled with either gdbm or bdb4 as the header cache backend,
-this option changes the database page size. Too large or too small values can
-waste space, memory, or CPU time. The default should be more or less optimal
-for most use cases.
-
-3.110. header_cache_compress
-
-Type: boolean
-Default: yes
-
-When mutt is compiled with qdbm as header cache backend, this option determines
-whether the database will be compressed. Compression results in database files
-roughly being one fifth of the usual diskspace, but the uncompression can
-result in a slower opening of cached folder(s).
-
-3.111. maildir_trash
+3.122. maildir_trash

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-If set, messages marked as deleted will be saved with the maildir (T)rashed
-flag instead of unlinked. NOTE: this only applies to maildir-style mailboxes.
+If set, messages marked as deleted will be saved with the maildir trashed flag
+instead of unlinked. Note: this only applies to maildir-style mailboxes.

 Setting it will have no effect on other mailbox types.
 
 Setting it will have no effect on other mailbox types.
 

-3.112. mark_old
+3.123. mark_old

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-Controls whether or not mutt marks newunread messages as old if you exit a
+Controls whether or not mutt marks new unread messages as old if you exit a

 mailbox without reading them. With this option set, the next time you start
 mailbox without reading them. With this option set, the next time you start

-mutt, the messages will show up with an "O" next to them in the index menu,
+mutt, the messages will show up with an ?O? next to them in the index menu,

 indicating that they are old.
 
 indicating that they are old.
 

-3.113. markers
+3.124. markers

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-Controls the display of wrapped lines in the internal pager. If set, a ``+''
-marker is displayed at the beginning of wrapped lines. Also see the ``
-$smart_wrap'' variable.
+Controls the display of wrapped lines in the internal pager. If set, a ?+?
+marker is displayed at the beginning of wrapped lines.

 
 

-3.114. mask
+Also see the $smart_wrap variable.
+
+3.125. mask

 
 Type: regular expression
 
 Type: regular expression

-Default: "!^\.[^.]"
+Default: ?!^\.[^.]?

 
 A regular expression used in the file browser, optionally preceded by the not
 
 A regular expression used in the file browser, optionally preceded by the not

-operator ``!''. Only files whose names match this mask will be shown. The match
+operator ?!?. Only files whose names match this mask will be shown. The match

 is always case-sensitive.
 
 is always case-sensitive.
 

-3.115. mbox
+3.126. mbox

 
 Type: path
 
 Type: path

-Default: "~/mbox"
+Default: ??/mbox?
+
+This specifies the folder into which read mail in your $spoolfile folder will
+be appended.

 
 

-This specifies the folder into which read mail in your ``$spoolfile'' folder
-will be appended.
+Also see the $move variable.

 
 

-3.116. mbox_type
+3.127. mbox_type

 
 Type: folder magic
 Default: mbox
 
 
 Type: folder magic
 Default: mbox
 

-The default mailbox type used when creating new folders. May be any of mbox,
-MMDF, MH and Maildir.
-
-3.117. metoo
-
-Type: boolean
-Default: no
-
-If unset, Mutt will remove your address (see the ``alternates'' command) from
-the list of recipients when replying to a message.
+The default mailbox type used when creating new folders. May be any of ?mbox?,
+?MMDF?, ?MH? and ?Maildir?. This is overriden by the -m command-line option.

 
 

-3.118. menu_context
+3.128. menu_context

 
 Type: number
 Default: 0
 
 This variable controls the number of lines of context that are given when
 
 Type: number
 Default: 0
 
 This variable controls the number of lines of context that are given when

-scrolling through menus. (Similar to ``$pager_context''.)
+scrolling through menus. (Similar to $pager_context.)

 
 

-3.119. menu_move_off
+3.129. menu_move_off

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -6523,7 +7424,7 @@ When unset, the bottom entry of menus will never scroll up past the bottom of
 the screen, unless there are less entries than lines. When set, the bottom
 entry may move off the bottom.
 
 the screen, unless there are less entries than lines. When set, the bottom
 entry may move off the bottom.
 

-3.120. menu_scroll
+3.130. menu_scroll

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -6533,149 +7434,158 @@ across a screen boundary. If unset, the screen is cleared and the next or
 previous page of the menu is displayed (useful for slow links to avoid many
 redraws).
 
 previous page of the menu is displayed (useful for slow links to avoid many
 redraws).
 

-3.121. meta_key
+3.131. message_cache_clean
+
+Type: boolean
+Default: no
+
+If set, mutt will clean out obsolete entries from the message cache when the
+mailbox is synchronized. You probably only want to set it every once in a
+while, since it can be a little slow (especially for large folders).
+
+3.132. message_cachedir
+
+Type: path
+Default: (empty)
+
+Set this to a directory and mutt will cache copies of messages from your IMAP
+and POP servers here. You are free to remove entries at any time.
+
+When setting this variable to a directory, mutt needs to fetch every remote
+message only once and can perform regular expression searches as fast as for
+local folders.
+
+Also see the $message_cache_clean variable.
+
+3.133. message_format
+
+Type: string
+Default: ?%s?
+
+This is the string displayed in the ?attachment? menu for attachments of type
+message/rfc822. For a full listing of defined printf(3)-like sequences see the
+section on $index_format.
+
+3.134. meta_key

 
 Type: boolean
 Default: no
 
 If set, forces Mutt to interpret keystrokes with the high bit (bit 8) set as if
 
 Type: boolean
 Default: no
 
 If set, forces Mutt to interpret keystrokes with the high bit (bit 8) set as if

-the user had pressed the ESC key and whatever key remains after having the high
+the user had pressed the Esc key and whatever key remains after having the high

 bit removed. For example, if the key pressed has an ASCII value of 0xf8, then
 bit removed. For example, if the key pressed has an ASCII value of 0xf8, then

-this is treated as if the user had pressed ESC then ``x''. This is because the
-result of removing the high bit from ``0xf8'' is ``0x78'', which is the ASCII
-character ``x''.
+this is treated as if the user had pressed Esc then ?x?. This is because the
+result of removing the high bit from 0xf8 is 0x78, which is the ASCII character
+?x?.
+
+3.135. metoo
+
+Type: boolean
+Default: no

 
 

-3.122. mh_purge
+If unset, Mutt will remove your address (see the ?alternates? command) from the
+list of recipients when replying to a message.
+
+3.136. mh_purge

 
 Type: boolean
 Default: no
 
 When unset, mutt will mimic mh's behaviour and rename deleted messages to ,<old
 
 Type: boolean
 Default: no
 
 When unset, mutt will mimic mh's behaviour and rename deleted messages to ,<old

-file name> in mh folders instead of really deleting them. If the variable is
-set, the message files will simply be deleted.
+file name> in mh folders instead of really deleting them. This leaves the
+message on disk but makes programs reading the folder ignore it. If the
+variable is set, the message files will simply be deleted.
+
+This option is similar to $maildir_trash for Maildir folders.

 
 

-3.123. mh_seq_flagged
+3.137. mh_seq_flagged

 
 Type: string
 
 Type: string

-Default: "flagged"
+Default: ?flagged?

 
 The name of the MH sequence used for flagged messages.
 
 
 The name of the MH sequence used for flagged messages.
 

-3.124. mh_seq_replied
+3.138. mh_seq_replied

 
 Type: string
 
 Type: string

-Default: "replied"
+Default: ?replied?

 
 The name of the MH sequence used to tag replied messages.
 
 
 The name of the MH sequence used to tag replied messages.
 

-3.125. mh_seq_unseen
+3.139. mh_seq_unseen

 
 Type: string
 
 Type: string

-Default: "unseen"
+Default: ?unseen?

 
 The name of the MH sequence used for unseen messages.
 
 
 The name of the MH sequence used for unseen messages.
 

-3.126. mime_forward
+3.140. mime_forward

 
 Type: quadoption
 Default: no
 
 
 Type: quadoption
 Default: no
 

-When set, the message you are forwarding will be attached as a separate MIME
-part instead of included in the main body of the message. This is useful for
-forwarding MIME messages so the receiver can properly view the message as it
-was delivered to you. If you like to switch between MIME and not MIME from mail
-to mail, set this variable to ask-no or ask-yes.
+When set, the message you are forwarding will be attached as a separate message
+/rfc822 MIME part instead of included in the main body of the message. This is
+useful for forwarding MIME messages so the receiver can properly view the
+message as it was delivered to you. If you like to switch between MIME and not
+MIME from mail to mail, set this variable to ?ask-no? or ?ask-yes?.

 
 

-Also see ``$forward_decode'' and ``$mime_forward_decode''.
+Also see $forward_decode and $mime_forward_decode.

 
 

-3.127. mime_forward_decode
+3.141. mime_forward_decode

 
 Type: boolean
 Default: no
 
 Controls the decoding of complex MIME messages into text/plain when forwarding
 
 Type: boolean
 Default: no
 
 Controls the decoding of complex MIME messages into text/plain when forwarding

-a message while ``$mime_forward'' is set. Otherwise ``$forward_decode'' is used
+a message while $mime_forward is set. Otherwise $forward_decode is used

 instead.
 
 instead.
 

-3.128. mime_forward_rest
+3.142. mime_forward_rest

 
 Type: quadoption
 Default: yes
 
 
 Type: quadoption
 Default: yes
 

-When forwarding multiple attachments of a MIME message from the recvattach
+When forwarding multiple attachments of a MIME message from the attachment

 menu, attachments which cannot be decoded in a reasonable manner will be
 attached to the newly composed message if this option is set.
 
 menu, attachments which cannot be decoded in a reasonable manner will be
 attached to the newly composed message if this option is set.
 

-3.129. mix_entry_format
+3.143. mix_entry_format

 
 Type: string
 
 Type: string

-Default: "%4n %c %-16s %a"
+Default: ?%4n %c %-16s %a?

 
 This variable describes the format of a remailer line on the mixmaster chain
 
 This variable describes the format of a remailer line on the mixmaster chain

-selection screen. The following printf-like sequences are supported:
-
-%n
-
-    The running number on the menu.
-
-%c
-
-    Remailer capabilities.
-
-%s
-
-    The remailer's short name.
-
-%a
+selection screen. The following printf(3)-like sequences are supported:

 
 

-    The remailer's e-mail address.
++----------------------------------+
+|%n|The running number on the menu.|
+|--+-------------------------------|
+|%c|Remailer capabilities.         |
+|--+-------------------------------|
+|%s|The remailer's short name.     |
+|--+-------------------------------|
+|%a|The remailer's e-mail address. |
++----------------------------------+

 
 

-3.130. mixmaster
+3.144. mixmaster

 
 Type: path
 
 Type: path

-Default: "mixmaster"
+Default: ?mixmaster?

 
 This variable contains the path to the Mixmaster binary on your system. It is
 used with various sets of parameters to gather the list of known remailers, and
 to finally send a message through the mixmaster chain.
 
 
 This variable contains the path to the Mixmaster binary on your system. It is
 used with various sets of parameters to gather the list of known remailers, and
 to finally send a message through the mixmaster chain.
 

-3.131. move
+3.145. move

 
 Type: quadoption
 
 Type: quadoption

-Default: ask-no
-
-Controls whether or not Mutt will move read messages from your spool mailbox to
-your ``$mbox'' mailbox, or as a result of a ``mbox-hook'' command.
-
-3.132. message_cachedir
-
-Type: path
-Default: ""
-
-Set this to a directory and mutt will cache copies of messages from your IMAP
-and POP servers here. You are free to remove entries at any time, for instance
-if stale entries accumulate because you have deleted messages with another mail
-client.
-
-3.133. message_cache_clean
-
-Type: boolean

 Default: no
 
 Default: no
 

-If set, mutt will clean out obsolete entries from the cache when the mailbox is
-synchronized. You probably only want to set it every once in a while, since it
-can be a little slow.
-
-3.134. message_format
-
-Type: string
-Default: "%s"
-
-This is the string displayed in the ``attachment'' menu for attachments of type
-message/rfc822. For a full listing of defined printf()-like sequences see the
-section on ``$index_format''.
+Controls whether or not Mutt will move read messages from your spool mailbox to
+your $mbox mailbox, or as a result of a ?mbox-hook? command.

 
 

-3.135. narrow_tree
+3.146. narrow_tree

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -6683,32 +7593,32 @@ Default: no
 This variable, when set, makes the thread tree narrower, allowing deeper
 threads to fit on the screen.
 
 This variable, when set, makes the thread tree narrower, allowing deeper
 threads to fit on the screen.
 

-3.136. net_inc
+3.147. net_inc

 
 Type: number
 Default: 10
 
 Operations that expect to transfer a large amount of data over the network will
 
 Type: number
 Default: 10
 
 Operations that expect to transfer a large amount of data over the network will

-update their progress every net_inc kilobytes. If set to 0, no progress
+update their progress every $net_inc kilobytes. If set to 0, no progress

 messages will be displayed.
 
 messages will be displayed.
 

-See also ``$read_inc'' and ``$write_inc''.
+See also $read_inc, $write_inc and $net_inc.

 
 

-3.137. pager
+3.148. pager

 
 Type: path
 
 Type: path

-Default: "builtin"
+Default: ?builtin?

 
 

-This variable specifies which pager you would like to use to view messages.
-builtin means to use the builtin pager, otherwise this variable should specify
-the pathname of the external pager you would like to use.
+This variable specifies which pager you would like to use to view messages. The
+value ?builtin? means to use the builtin pager, otherwise this variable should
+specify the pathname of the external pager you would like to use.

 
 Using an external pager may have some disadvantages: Additional keystrokes are
 necessary because you can't call mutt functions directly from the pager, and
 screen resizes cause lines longer than the screen width to be badly formatted
 in the help menu.
 
 
 Using an external pager may have some disadvantages: Additional keystrokes are
 necessary because you can't call mutt functions directly from the pager, and
 screen resizes cause lines longer than the screen width to be badly formatted
 in the help menu.
 

-3.138. pager_context
+3.149. pager_context

 
 Type: number
 Default: 0
 
 Type: number
 Default: 0


@@ -6718,16 +7628,20 @@ displaying the next or previous page in the internal pager. By default, Mutt
 will display the line after the last one on the screen at the top of the next
 page (0 lines of context).
 
 will display the line after the last one on the screen at the top of the next
 page (0 lines of context).
 

-3.139. pager_format
+This variable also specifies the amount of context given for search results. If
+positive, this many lines will be given before a match, if 0, the match will be
+top-aligned.
+
+3.150. pager_format

 
 Type: string
 
 Type: string

-Default: "-%Z- %C/%m: %-20.20n %s%* -- (%P)"
+Default: ?-%Z- %C/%m: %-20.20n   %s%*  -- (%P)?

 
 

-This variable controls the format of the one-line message ``status'' displayed
+This variable controls the format of the one-line message ?status? displayed

 before each message in either the internal or an external pager. The valid
 before each message in either the internal or an external pager. The valid

-sequences are listed in the ``$index_format'' section.
+sequences are listed in the $index_format section.

 
 

-3.140. pager_index_lines
+3.151. pager_index_lines

 
 Type: number
 Default: 0
 
 Type: number
 Default: 0


@@ -6738,824 +7652,440 @@ be roughly one third of the way down this mini-index, giving the reader the
 context of a few messages before and after the message. This is useful, for
 example, to determine how many messages remain to be read in the current
 thread. One of the lines is reserved for the status bar from the index, so a
 context of a few messages before and after the message. This is useful, for
 example, to determine how many messages remain to be read in the current
 thread. One of the lines is reserved for the status bar from the index, so a

-pager_index_lines of 6 will only show 5 lines of the actual index. A value of 0
-results in no index being shown. If the number of messages in the current
-folder is less than pager_index_lines, then the index will only use as many
-lines as it needs.
+setting of 6 will only show 5 lines of the actual index. A value of 0 results
+in no index being shown. If the number of messages in the current folder is
+less than $pager_index_lines, then the index will only use as many lines as it
+needs.

 
 

-3.141. pager_stop
+3.152. pager_stop

 
 Type: boolean
 Default: no
 
 When set, the internal-pager will not move to the next message when you are at
 
 Type: boolean
 Default: no
 
 When set, the internal-pager will not move to the next message when you are at

-the end of a message and invoke the next-page function.
+the end of a message and invoke the <next-page> function.

 
 

-3.142. crypt_autosign
+3.153. pgp_auto_decode

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-Setting this variable will cause Mutt to always attempt to cryptographically
-sign outgoing messages. This can be overridden by use of the pgp-menu, when
-signing is not required or encryption is requested as well. If ``
-$smime_is_default'' is set, then OpenSSL is used instead to create S/MIME
-messages and settings can be overridden by use of the smime-menu. (Crypto only)
+If set, mutt will automatically attempt to decrypt traditional PGP messages
+whenever the user performs an operation which ordinarily would result in the
+contents of the message being operated on. For example, if the user displays a
+pgp-traditional message which has not been manually checked with the
+<check-traditional-pgp> function, mutt will automatically check the message for
+traditional pgp.

 
 

-3.143. crypt_autoencrypt
+3.154. pgp_autoinline

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-Setting this variable will cause Mutt to always attempt to PGP encrypt outgoing
-messages. This is probably only useful in connection to the send-hook command.
-It can be overridden by use of the pgp-menu, when encryption is not required or
-signing is requested as well. IF ``$smime_is_default'' is set, then OpenSSL is
-used instead to create S/MIME messages and settings can be overridden by use of
-the smime-menu. (Crypto only)
+This option controls whether Mutt generates old-style inline (traditional) PGP
+encrypted or signed messages under certain circumstances. This can be
+overridden by use of the pgp menu, when inline is not required.

 
 

-3.144. pgp_ignore_subkeys
+Note that Mutt might automatically use PGP/MIME for messages which consist of
+more than a single MIME part. Mutt can be configured to ask before sending PGP/
+MIME messages when inline (traditional) would not work.

 
 

-Type: boolean
-Default: yes
+Also see the $pgp_mime_auto variable.

 
 

-Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, the
-principal key will inherit the subkeys' capabilities. Unset this if you want to
-play interesting key selection games. (PGP only)
+Also note that using the old-style PGP message format is strongly deprecated.
+(PGP only)

 
 

-3.145. crypt_replyencrypt
+3.155. pgp_check_exit

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-If set, automatically PGP or OpenSSL encrypt replies to messages which are
-encrypted. (Crypto only)
+If set, mutt will check the exit code of the PGP subprocess when signing or
+encrypting. A non-zero exit code means that the subprocess failed. (PGP only)

 
 

-3.146. crypt_replysign
+3.156. pgp_clearsign_command

 
 

-Type: boolean
-Default: no
+Type: string
+Default: (empty)

 
 

-If set, automatically PGP or OpenSSL sign replies to messages which are signed.
+This format is used to create an old-style ?clearsigned? PGP message. Note that
+the use of this format is strongly deprecated.

 
 

-Note: this does not work on messages that are encrypted and signed! (Crypto
-only)
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)

 
 

-3.147. crypt_replysignencrypted
+3.157. pgp_decode_command

 
 

-Type: boolean
-Default: no
+Type: string
+Default: (empty)

 
 

-If set, automatically PGP or OpenSSL sign replies to messages which are
-encrypted. This makes sense in combination with ``$crypt_replyencrypt'',
-because it allows you to sign all messages which are automatically encrypted.
-This works around the problem noted in ``$crypt_replysign'', that mutt is not
-able to find out whether an encrypted message is also signed. (Crypto only)
+This format strings specifies a command which is used to decode application/pgp
+attachments.

 
 

-3.148. crypt_timestamp
+The PGP command formats have their own set of printf(3)-like sequences:
+
++-----------------------------------------------------------------------------+
+|%p|Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty string   |
+|  |otherwise. Note: This may be used with a %? construct.                    |
+|--+--------------------------------------------------------------------------|
+|%f|Expands to the name of a file containing a message.                       |
+|--+--------------------------------------------------------------------------|
+|%s|Expands to the name of a file containing the signature part of a multipart|
+|  |/signed attachment when verifying it.                                     |
+|--+--------------------------------------------------------------------------|
+|%a|The value of $pgp_sign_as.                                                |
+|--+--------------------------------------------------------------------------|
+|%r|One or more key IDs.                                                      |
++-----------------------------------------------------------------------------+

 
 

-Type: boolean
-Default: yes
+For examples on how to configure these formats for the various versions of PGP
+which are floating around, see the pgp and gpg sample configuration files in
+the samples/ subdirectory which has been installed on your system alongside the
+documentation. (PGP only)

 
 

-If set, mutt will include a time stamp in the lines surrounding PGP or S/MIME
-output, so spoofing such lines is more difficult. If you are using colors to
-mark these lines, and rely on these, you may unset this setting. (Crypto only)
+3.158. pgp_decrypt_command

 
 

-3.149. pgp_use_gpg_agent
+Type: string
+Default: (empty)

 
 

-Type: boolean
-Default: no
+This command is used to decrypt a PGP encrypted message.

 
 

-If set, mutt will use a possibly-running gpg-agent process. (PGP only)
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)

 
 

-3.150. crypt_verify_sig
+3.159. pgp_encrypt_only_command

 
 

-Type: quadoption
-Default: yes
+Type: string
+Default: (empty)

 
 

-If ``yes'', always attempt to verify PGP or S/MIME signatures. If ``ask'', ask
-whether or not to verify the signature. If ``no'', never attempt to verify
-cryptographic signatures. (Crypto only)
+This command is used to encrypt a body part without signing it.

 
 

-3.151. smime_is_default
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)

 
 

-Type: boolean
-Default: no
+3.160. pgp_encrypt_sign_command

 
 

-The default behaviour of mutt is to use PGP on all auto-sign/encryption
-operations. To override and to use OpenSSL instead this must be set. However,
-this has no effect while replying, since mutt will automatically select the
-same application that was used to sign/encrypt the original message. (Note that
-this variable can be overridden by unsetting $crypt_autosmime.) (S/MIME only)
+Type: string
+Default: (empty)

 
 

-3.152. smime_ask_cert_label
+This command is used to both sign and encrypt a body part.

 
 

-Type: boolean
-Default: yes
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)

 
 

-This flag controls whether you want to be asked to enter a label for a
-certificate about to be added to the database or not. It is set by default. (S/
-MIME only)
+3.161. pgp_entry_format

 
 

-3.153. smime_decrypt_use_default_key
+Type: string
+Default: ?%4n %t%f %4l/0x%k %-4a %2c %u?

 
 

-Type: boolean
-Default: yes
+This variable allows you to customize the PGP key selection menu to your
+personal taste. This string is similar to $index_format, but has its own set of
+printf(3)-like sequences:
+
++-------------------------------------------------------------+
+|%n    |number                                                |
+|------+------------------------------------------------------|
+|%k    |key id                                                |
+|------+------------------------------------------------------|
+|%u    |user id                                               |
+|------+------------------------------------------------------|
+|%a    |algorithm                                             |
+|------+------------------------------------------------------|
+|%l    |key length                                            |
+|------+------------------------------------------------------|
+|%f    |flags                                                 |
+|------+------------------------------------------------------|
+|%c    |capabilities                                          |
+|------+------------------------------------------------------|
+|%t    |trust/validity of the key-uid association             |
+|------+------------------------------------------------------|
+|%[<s>]|date of the key where <s> is an strftime(3) expression|
++-------------------------------------------------------------+

 
 

-If set (default) this tells mutt to use the default key for decryption.
-Otherwise, if manage multiple certificate-key-pairs, mutt will try to use the
-mailbox-address to determine the key to use. It will ask you to supply a key,
-if it can't find one. (S/MIME only)
+(PGP only)

 
 

-3.154. pgp_entry_format
+3.162. pgp_export_command

 
 Type: string
 
 Type: string

-Default: "%4n %t%f %4l/0x%k %-4a %2c %u"
+Default: (empty)

 
 

-This variable allows you to customize the PGP key selection menu to your
-personal taste. This string is similar to ``$index_format'', but has its own
-set of printf()-like sequences:
+This command is used to export a public key from the user's key ring.

 
 

-%n
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)

 
 

-    number
+3.163. pgp_getkeys_command

 
 

-%k
+Type: string
+Default: (empty)

 
 

-    key id
+This command is invoked whenever mutt will need public key information. Of the
+sequences supported by $pgp_decode_command, %r is the only printf(3)-like
+sequence used with this format. (PGP only)

 
 

-%u
+3.164. pgp_good_sign

 
 

-    user id
+Type: regular expression
+Default: (empty)

 
 

-%a
+If you assign a text to this variable, then a PGP signature is only considered
+verified if the output from $pgp_verify_command contains the text. Use this
+variable if the exit code from the command is 0 even for bad signatures. (PGP
+only)

 
 

-    algorithm
+3.165. pgp_ignore_subkeys

 
 

-%l
+Type: boolean
+Default: yes

 
 

-    key length
+Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, the
+principal key will inherit the subkeys' capabilities. Unset this if you want to
+play interesting key selection games. (PGP only)

 
 

-%f
+3.166. pgp_import_command

 
 

-    flags
+Type: string
+Default: (empty)

 
 

-%c
+This command is used to import a key from a message into the user's public key
+ring.

 
 

-    capabilities
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)

 
 

-%t
+3.167. pgp_list_pubring_command

 
 

-    trust/validity of the key-uid association
+Type: string
+Default: (empty)

 
 

-%[<s>]
+This command is used to list the public key ring's contents. The output format
+must be analogous to the one used by

 
 

-    date of the key where <s> is an strftime(3) expression
+gpg --list-keys --with-colons.

 
 

-(PGP only)
+This format is also generated by the pgpring utility which comes with mutt.

 
 

-3.155. pgp_good_sign
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)

 
 

-Type: regular expression
-Default: ""
+3.168. pgp_list_secring_command

 
 

-If you assign a text to this variable, then a PGP signature is only considered
-verified if the output from $pgp_verify_command contains the text. Use this
-variable if the exit code from the command is 0 even for bad signatures. (PGP
-only)
+Type: string
+Default: (empty)

 
 

-3.156. pgp_check_exit
+This command is used to list the secret key ring's contents. The output format
+must be analogous to the one used by:

 
 

-Type: boolean
-Default: yes
-
-If set, mutt will check the exit code of the PGP subprocess when signing or
-encrypting. A non-zero exit code means that the subprocess failed. (PGP only)
-
-3.157. pgp_long_ids
+gpg --list-keys --with-colons.

 
 

-Type: boolean
-Default: no
+This format is also generated by the pgpring utility which comes with mutt.

 
 

-If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs. (PGP
-only)
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)

 
 

-3.158. pgp_retainable_sigs
+3.169. pgp_long_ids

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-If set, signed and encrypted messages will consist of nested multipart/signed
-and multipart/encrypted body parts.
-
-This is useful for applications like encrypted and signed mailing lists, where
-the outer layer (multipart/encrypted) can be easily removed, while the inner
-multipart/signed part is retained. (PGP only)
+If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs. (PGP
+only)

 
 

-3.159. pgp_autoinline
+3.170. pgp_mime_auto

 
 

-Type: boolean
-Default: no
-
-This option controls whether Mutt generates old-style inline (traditional) PGP
-encrypted or signed messages under certain circumstances. This can be
-overridden by use of the pgp-menu, when inline is not required.
+Type: quadoption
+Default: ask-yes

 
 

-Note that Mutt might automatically use PGP/MIME for messages which consist of
-more than a single MIME part. Mutt can be configured to ask before sending PGP/
-MIME messages when inline (traditional) would not work. See also: ``
-$pgp_mime_auto''.
+This option controls whether Mutt will prompt you for automatically sending a
+(signed/encrypted) message using PGP/MIME when inline (traditional) fails (for
+any reason).

 
 

-Also note that using the old-style PGP message format is stronglydeprecated.
+Also note that using the old-style PGP message format is strongly deprecated.

 (PGP only)
 
 (PGP only)
 

-3.160. pgp_replyinline
+3.171. pgp_replyinline

 
 Type: boolean
 Default: no
 
 Setting this variable will cause Mutt to always attempt to create an inline
 (traditional) message when replying to a message which is PGP encrypted/signed
 
 Type: boolean
 Default: no
 
 Setting this variable will cause Mutt to always attempt to create an inline
 (traditional) message when replying to a message which is PGP encrypted/signed

-inline. This can be overridden by use of the pgp-menu, when inline is not
+inline. This can be overridden by use of the pgp menu, when inline is not

 required. This option does not automatically detect if the (replied-to) message
 is inline; instead it relies on Mutt internals for previously checked/flagged
 messages.
 
 Note that Mutt might automatically use PGP/MIME for messages which consist of
 more than a single MIME part. Mutt can be configured to ask before sending PGP/
 required. This option does not automatically detect if the (replied-to) message
 is inline; instead it relies on Mutt internals for previously checked/flagged
 messages.
 
 Note that Mutt might automatically use PGP/MIME for messages which consist of
 more than a single MIME part. Mutt can be configured to ask before sending PGP/

-MIME messages when inline (traditional) would not work. See also: ``
-$pgp_mime_auto''.
-
-Also note that using the old-style PGP message format is stronglydeprecated.
-(PGP only)
+MIME messages when inline (traditional) would not work.

 
 

-3.161. pgp_show_unusable
+Also see the $pgp_mime_auto variable.

 
 

-Type: boolean
-Default: yes
-
-If set, mutt will display non-usable keys on the PGP key selection menu. This
-includes keys which have been revoked, have expired, or have been marked as
-``disabled'' by the user. (PGP only)
-
-3.162. pgp_sign_as
-
-Type: string
-Default: ""
-
-If you have more than one key pair, this option allows you to specify which of
-your private keys to use. It is recommended that you use the keyid form to
-specify your key (e.g., ``0x00112233''). (PGP only)
-
-3.163. pgp_strict_enc
-
-Type: boolean
-Default: yes
-
-If set, Mutt will automatically encode PGP/MIME signed messages as
-quoted-printable. Please note that unsetting this variable may lead to problems
-with non-verifyable PGP signatures, so only change this if you know what you
-are doing. (PGP only)
-
-3.164. pgp_timeout
-
-Type: number
-Default: 300
-
-The number of seconds after which a cached passphrase will expire if not used.
-(PGP only)
-
-3.165. pgp_sort_keys
-
-Type: sort order
-Default: address
-
-Specifies how the entries in the `pgp keys' menu are sorted. The following are
-legal values:
-
-address
-
-    sort alphabetically by user id
-
-keyid
-
-    sort alphabetically by key id
-
-date
-
-    sort by key creation date
-
-trust
-
-    sort by the trust of the key
-
-If you prefer reverse order of the above values, prefix it with `reverse-'.
+Also note that using the old-style PGP message format is strongly deprecated.

 (PGP only)
 
 (PGP only)
 

-3.166. pgp_mime_auto
-
-Type: quadoption
-Default: ask-yes
-
-This option controls whether Mutt will prompt you for automatically sending a
-(signed/encrypted) message using PGP/MIME when inline (traditional) fails (for
-any reason).
-
-Also note that using the old-style PGP message format is stronglydeprecated.
-(PGP only)
-
-3.167. pgp_auto_decode
+3.172. pgp_retainable_sigs

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-If set, mutt will automatically attempt to decrypt traditional PGP messages
-whenever the user performs an operation which ordinarily would result in the
-contents of the message being operated on. For example, if the user displays a
-pgp-traditional message which has not been manually checked with the
-check-traditional-pgp function, mutt will automatically check the message for
-traditional pgp.
-
-3.168. pgp_decode_command
-
-Type: string
-Default: ""
-
-This format strings specifies a command which is used to decode application/pgp
-attachments.
-
-The PGP command formats have their own set of printf-like sequences:
-
-%p
-
-    Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty string
-    otherwise. Note: This may be used with a %? construct.
-
-%f
-
-    Expands to the name of a file containing a message.
-
-%s
-
-    Expands to the name of a file containing the signature part of a multipart/
-    signed attachment when verifying it.
-
-%a
-
-    The value of $pgp_sign_as.
-
-%r
-
-    One or more key IDs.
-
-For examples on how to configure these formats for the various versions of PGP
-which are floating around, see the pgp*.rc and gpg.rc files in the samples/
-subdirectory which has been installed on your system alongside the
-documentation. (PGP only)
-
-3.169. pgp_getkeys_command
-
-Type: string
-Default: ""
-
-This command is invoked whenever mutt will need public key information. %r is
-the only printf-like sequence used with this format. (PGP only)
-
-3.170. pgp_verify_command
-
-Type: string
-Default: ""
-
-This command is used to verify PGP signatures. (PGP only)
-
-3.171. pgp_decrypt_command
-
-Type: string
-Default: ""
-
-This command is used to decrypt a PGP encrypted message. (PGP only)
-
-3.172. pgp_clearsign_command
-
-Type: string
-Default: ""
-
-This format is used to create a old-style "clearsigned" PGP message. Note that
-the use of this format is stronglydeprecated. (PGP only)
-
-3.173. pgp_sign_command
-
-Type: string
-Default: ""
-
-This command is used to create the detached PGP signature for a multipart/
-signed PGP/MIME body part. (PGP only)
-
-3.174. pgp_encrypt_sign_command
-
-Type: string
-Default: ""
-
-This command is used to both sign and encrypt a body part. (PGP only)
-
-3.175. pgp_encrypt_only_command
-
-Type: string
-Default: ""
-
-This command is used to encrypt a body part without signing it. (PGP only)
-
-3.176. pgp_import_command
-
-Type: string
-Default: ""
-
-This command is used to import a key from a message into the user's public key
-ring. (PGP only)
-
-3.177. pgp_export_command
-
-Type: string
-Default: ""
-
-This command is used to export a public key from the user's key ring. (PGP
-only)
-
-3.178. pgp_verify_key_command
-
-Type: string
-Default: ""
-
-This command is used to verify key information from the key selection menu.
-(PGP only)
-
-3.179. pgp_list_secring_command
-
-Type: string
-Default: ""
-
-This command is used to list the secret key ring's contents. The output format
-must be analogous to the one used by gpg --list-keys --with-colons.
-
-This format is also generated by the pgpring utility which comes with mutt.
-(PGP only)
-
-3.180. pgp_list_pubring_command
-
-Type: string
-Default: ""
-
-This command is used to list the public key ring's contents. The output format
-must be analogous to the one used by gpg --list-keys --with-colons.
-
-This format is also generated by the pgpring utility which comes with mutt.
-(PGP only)
-
-3.181. forward_decrypt
-
-Type: boolean
-Default: yes
-
-Controls the handling of encrypted messages when forwarding a message. When
-set, the outer layer of encryption is stripped off. This variable is only used
-if ``$mime_forward'' is set and ``$mime_forward_decode'' is unset. (PGP only)
-
-3.182. smime_timeout
-
-Type: number
-Default: 300
-
-The number of seconds after which a cached passphrase will expire if not used.
-(S/MIME only)
-
-3.183. smime_encrypt_with
-
-Type: string
-Default: ""
-
-This sets the algorithm that should be used for encryption. Valid choices are
-"des", "des3", "rc2-40", "rc2-64", "rc2-128". If unset "3des" (TripleDES) is
-used. (S/MIME only)
-
-3.184. smime_keys
-
-Type: path
-Default: ""
-
-Since there is no pubring/secring as with PGP, mutt has to handle storage ad
-retrieval of keys/certs by itself. This is very basic right now, and stores
-keys and certificates in two different directories, both named as the
-hash-value retrieved from OpenSSL. There is an index file which contains
-mailbox-address keyid pair, and which can be manually edited. This one points
-to the location of the private keys. (S/MIME only)
-
-3.185. smime_ca_location
-
-Type: path
-Default: ""
-
-This variable contains the name of either a directory, or a file which contains
-trusted certificates for use with OpenSSL. (S/MIME only)
-
-3.186. smime_certificates
-
-Type: path
-Default: ""
-
-Since there is no pubring/secring as with PGP, mutt has to handle storage and
-retrieval of keys by itself. This is very basic right now, and keys and
-certificates are stored in two different directories, both named as the
-hash-value retrieved from OpenSSL. There is an index file which contains
-mailbox-address keyid pairs, and which can be manually edited. This one points
-to the location of the certificates. (S/MIME only)
-
-3.187. smime_decrypt_command
-
-Type: string
-Default: ""
-
-This format string specifies a command which is used to decrypt application/
-x-pkcs7-mime attachments.
-
-The OpenSSL command formats have their own set of printf-like sequences similar
-to PGP's:
-
-%f
-
-    Expands to the name of a file containing a message.
-
-%s
-
-    Expands to the name of a file containing the signature part of a multipart/
-    signed attachment when verifying it.
-
-%k
-
-    The key-pair specified with $smime_default_key
-
-%c
-
-    One or more certificate IDs.
-
-%a
-
-    The algorithm used for encryption.
-
-%C
-
-    CA location: Depending on whether $smime_ca_location points to a directory
-    or file, this expands to "-CApath $smime_ca_location" or "-CAfile
-    $smime_ca_location".
-
-For examples on how to configure these formats, see the smime.rc in the samples
-/ subdirectory which has been installed on your system alongside the
-documentation. (S/MIME only)
-
-3.188. smime_verify_command
-
-Type: string
-Default: ""
-
-This command is used to verify S/MIME signatures of type multipart/signed. (S/
-MIME only)
-
-3.189. smime_verify_opaque_command
-
-Type: string
-Default: ""
-
-This command is used to verify S/MIME signatures of type application/
-x-pkcs7-mime. (S/MIME only)
-
-3.190. smime_sign_command
-
-Type: string
-Default: ""
-
-This command is used to created S/MIME signatures of type multipart/signed,
-which can be read by all mail clients. (S/MIME only)
-
-3.191. smime_sign_opaque_command
-
-Type: string
-Default: ""
-
-This command is used to created S/MIME signatures of type application/
-x-pkcs7-signature, which can only be handled by mail clients supporting the S/
-MIME extension. (S/MIME only)
-
-3.192. smime_encrypt_command
-
-Type: string
-Default: ""
-
-This command is used to create encrypted S/MIME messages. (S/MIME only)
-
-3.193. smime_pk7out_command
-
-Type: string
-Default: ""
-
-This command is used to extract PKCS7 structures of S/MIME signatures, in order
-to extract the public X509 certificate(s). (S/MIME only)
-
-3.194. smime_get_cert_command
-
-Type: string
-Default: ""
-
-This command is used to extract X509 certificates from a PKCS7 structure. (S/
-MIME only)
-
-3.195. smime_get_signer_cert_command
-
-Type: string
-Default: ""
-
-This command is used to extract only the signers X509 certificate from a S/MIME
-signature, so that the certificate's owner may get compared to the email's
-'From'-field. (S/MIME only)
-
-3.196. smime_import_cert_command
-
-Type: string
-Default: ""
-
-This command is used to import a certificate via smime_keys. (S/MIME only)
-
-3.197. smime_get_cert_email_command
-
-Type: string
-Default: ""
-
-This command is used to extract the mail address(es) used for storing X509
-certificates, and for verification purposes (to check whether the certificate
-was issued for the sender's mailbox). (S/MIME only)
-
-3.198. smime_default_key
-
-Type: string
-Default: ""
-
-This is the default key-pair to use for signing. This must be set to the keyid
-(the hash-value that OpenSSL generates) to work properly (S/MIME only)
-
-3.199. ssl_client_cert
-
-Type: path
-Default: ""
-
-The file containing a client certificate and its associated private key.
-
-3.200. ssl_force_tls
-
-Type: boolean
-Default: no
-
-If this variable is set, Mutt will require that all connections to remote
-servers be encrypted. Furthermore it will attempt to negotiate TLS even if the
-server does not advertise the capability, since it would otherwise have to
-abort the connection anyway. This option supersedes ``$ssl_starttls''.
-
-3.201. ssl_starttls
-
-Type: quadoption
-Default: yes
-
-If set (the default), mutt will attempt to use STARTTLS on servers advertising
-the capability. When unset, mutt will not attempt to use STARTTLS regardless of
-the server's capabilities.
-
-3.202. certificate_file
-
-Type: path
-Default: "~/.mutt_certificates"
-
-This variable specifies the file where the certificates you trust are saved.
-When an unknown certificate is encountered, you are asked if you accept it or
-not. If you accept it, the certificate can also be saved in this file and
-further connections are automatically accepted.
-
-You can also manually add CA certificates in this file. Any server certificate
-that is signed with one of these CA certificates are also automatically
-accepted.
+If set, signed and encrypted messages will consist of nested multipart/signed
+and multipart/encrypted body parts.

 
 

-Example: set certificate_file=~/.mutt/certificates
+This is useful for applications like encrypted and signed mailing lists, where
+the outer layer (multipart/encrypted) can be easily removed, while the inner
+multipart/signed part is retained. (PGP only)

 
 

-3.203. ssl_usesystemcerts
+3.173. pgp_show_unusable

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-If set to yes, mutt will use CA certificates in the system-wide certificate
-store when checking if server certificate is signed by a trusted CA.
+If set, mutt will display non-usable keys on the PGP key selection menu. This
+includes keys which have been revoked, have expired, or have been marked as
+?disabled? by the user. (PGP only)

 
 

-3.204. entropy_file
+3.174. pgp_sign_as

 
 

-Type: path
-Default: ""
+Type: string
+Default: (empty)

 
 

-The file which includes random data that is used to initialize SSL library
-functions.
+If you have more than one key pair, this option allows you to specify which of
+your private keys to use. It is recommended that you use the keyid form to
+specify your key (e.g. 0x00112233). (PGP only)

 
 

-3.205. ssl_use_sslv2
+3.175. pgp_sign_command

 
 

-Type: boolean
-Default: yes
+Type: string
+Default: (empty)

 
 

-This variables specifies whether to attempt to use SSLv2 in the SSL
-authentication process.
+This command is used to create the detached PGP signature for a multipart/
+signed PGP/MIME body part.

 
 

-3.206. ssl_use_sslv3
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)

 
 

-Type: boolean
-Default: yes
+3.176. pgp_sort_keys

 
 

-This variables specifies whether to attempt to use SSLv3 in the SSL
-authentication process.
+Type: sort order
+Default: address
+
+Specifies how the entries in the pgp menu are sorted. The following are legal
+values:
+
++--------------------------------------+
+|address|sort alphabetically by user id|
+|-------+------------------------------|
+|keyid  |sort alphabetically by key id |
+|-------+------------------------------|
+|date   |sort by key creation date     |
+|-------+------------------------------|
+|trust  |sort by the trust of the key  |
++--------------------------------------+
+
+If you prefer reverse order of the above values, prefix it with ?reverse-?.
+(PGP only)

 
 

-3.207. ssl_use_tlsv1
+3.177. pgp_strict_enc

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-This variables specifies whether to attempt to use TLSv1 in the SSL
-authentication process.
+If set, Mutt will automatically encode PGP/MIME signed messages as
+quoted-printable. Please note that unsetting this variable may lead to problems
+with non-verifyable PGP signatures, so only change this if you know what you
+are doing. (PGP only)

 
 

-3.208. ssl_min_dh_prime_bits
+3.178. pgp_timeout

 
 Type: number
 
 Type: number

-Default: 0
+Default: 300

 
 

-This variable specifies the minimum acceptable prime size (in bits) for use in
-any Diffie-Hellman key exchange. A value of 0 will use the default from the
-GNUTLS library.
+The number of seconds after which a cached passphrase will expire if not used.
+(PGP only)

 
 

-3.209. ssl_ca_certificates_file
+3.179. pgp_use_gpg_agent

 
 

-Type: path
-Default: ""
+Type: boolean
+Default: no

 
 

-This variable specifies a file containing trusted CA certificates. Any server
-certificate that is signed with one of these CA certificates are also
-automatically accepted.
+If set, mutt will use a possibly-running gpg-agent(1) process. (PGP only)

 
 

-Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
+3.180. pgp_verify_command

 
 

-3.210. pipe_split
+Type: string
+Default: (empty)

 
 

-Type: boolean
-Default: no
+This command is used to verify PGP signatures.

 
 

-Used in connection with the pipe-message command and the ``tag- prefix''
-operator. If this variable is unset, when piping a list of tagged messages Mutt
-will concatenate the messages and will pipe them as a single folder. When set,
-Mutt will pipe the messages one by one. In both cases the messages are piped in
-the current sorted order, and the ``$pipe_sep'' separator is added after each
-message.
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)
+
+3.181. pgp_verify_key_command
+
+Type: string
+Default: (empty)

 
 

-3.211. pipe_decode
+This command is used to verify key information from the key selection menu.
+
+This is a format string, see the $pgp_decode_command command for possible
+printf(3)-like sequences. (PGP only)
+
+3.182. pipe_decode

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-Used in connection with the pipe-message command. When unset, Mutt will pipe
+Used in connection with the <pipe-message> command. When unset, Mutt will pipe

 the messages without any preprocessing. When set, Mutt will weed headers and
 the messages without any preprocessing. When set, Mutt will weed headers and

-will attempt to PGP/MIME decode the messages first.
+will attempt to decode the messages first.

 
 

-3.212. pipe_sep
+3.183. pipe_sep

 
 Type: string
 
 Type: string

-Default: "\n"
+Default: ?\n?

 
 The separator to add between messages when piping a list of tagged messages to
 an external Unix command.
 
 
 The separator to add between messages when piping a list of tagged messages to
 an external Unix command.
 

-3.213. pop_authenticators
-
-Type: string
-Default: ""
+3.184. pipe_split

 
 

-This is a colon-delimited list of authentication methods mutt may attempt to
-use to log in to an POP server, in the order mutt should try them.
-Authentication methods are either 'user', 'apop' or any SASL mechanism, eg
-'digest-md5', 'gssapi' or 'cram-md5'. This parameter is case-insensitive. If
-this parameter is unset (the default) mutt will try all available methods, in
-order from most-secure to least-secure.
+Type: boolean
+Default: no

 
 

-Example: set pop_authenticators="digest-md5:apop:user"
+Used in connection with the <pipe-message> function following <tag-prefix>. If
+this variable is unset, when piping a list of tagged messages Mutt will
+concatenate the messages and will pipe them all concatenated. When set, Mutt
+will pipe the messages one by one. In both cases the messages are piped in the
+current sorted order, and the $pipe_sep separator is added after each message.

 
 

-3.214. pop_auth_try_all
+3.185. pop_auth_try_all

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-If set, Mutt will try all available methods. When unset, Mutt will only fall
-back to other authentication methods if the previous methods are unavailable.
-If a method is available but authentication fails, Mutt will not connect to the
-POP server.
+If set, Mutt will try all available authentication methods. When unset, Mutt
+will only fall back to other authentication methods if the previous methods are
+unavailable. If a method is available but authentication fails, Mutt will not
+connect to the POP server.
+
+3.186. pop_authenticators
+
+Type: string
+Default: (empty)
+
+This is a colon-delimited list of authentication methods mutt may attempt to
+use to log in to an POP server, in the order mutt should try them.
+Authentication methods are either ?user?, ?apop? or any SASL mechanism, eg
+?digest-md5?, ?gssapi? or ?cram-md5?. This option is case-insensitive. If this
+option is unset (the default) mutt will try all available methods, in order
+from most-secure to least-secure.
+
+Example:
+
+set pop_authenticators="digest-md5:apop:user"

 
 

-3.215. pop_checkinterval
+3.187. pop_checkinterval

 
 Type: number
 Default: 60
 
 Type: number
 Default: 60


@@ -7563,137 +8093,145 @@ Default: 60
 This variable configures how often (in seconds) mutt should look for new mail
 in the currently selected mailbox if it is a POP mailbox.
 
 This variable configures how often (in seconds) mutt should look for new mail
 in the currently selected mailbox if it is a POP mailbox.
 

-3.216. pop_delete
+3.188. pop_delete

 
 Type: quadoption
 Default: ask-no
 
 If set, Mutt will delete successfully downloaded messages from the POP server
 
 Type: quadoption
 Default: ask-no
 
 If set, Mutt will delete successfully downloaded messages from the POP server

-when using the fetch-mail function. When unset, Mutt will download messages but
-also leave them on the POP server.
+when using the <fetch-mail> function. When unset, Mutt will download messages
+but also leave them on the POP server.

 
 

-3.217. pop_host
+3.189. pop_host

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 

-The name of your POP server for the fetch-mail function. You can also specify
+The name of your POP server for the <fetch-mail> function. You can also specify

 an alternative port, username and password, ie:
 
 [pop[s]://][username[:password]@]popserver[:port]
 
 an alternative port, username and password, ie:
 
 [pop[s]://][username[:password]@]popserver[:port]
 

-3.218. pop_last
+where ?[...]? denotes an optional part.
+
+3.190. pop_last

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-If this variable is set, mutt will try to use the "LAST" POP command for
-retrieving only unread messages from the POP server when using the fetch-mail
+If this variable is set, mutt will try to use the ?LAST? POP command for
+retrieving only unread messages from the POP server when using the <fetch-mail>

 function.
 
 function.
 

-3.219. pop_reconnect
+3.191. pop_pass
+
+Type: string
+Default: (empty)
+
+Specifies the password for your POP account. If unset, Mutt will prompt you for
+your password when you open a POP mailbox.
+
+Warning: you should only use this option when you are on a fairly secure
+machine, because the superuser can read your muttrc even if you are the only
+one who can read the file.
+
+3.192. pop_reconnect

 
 Type: quadoption
 Default: ask-yes
 
 
 Type: quadoption
 Default: ask-yes
 

-Controls whether or not Mutt will try to reconnect to POP server if the
+Controls whether or not Mutt will try to reconnect to the POP server if the

 connection is lost.
 
 connection is lost.
 

-3.220. pop_user
+3.193. pop_user

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 Your login name on the POP server.
 
 This variable defaults to your user name on the local machine.
 
 
 Your login name on the POP server.
 
 This variable defaults to your user name on the local machine.
 

-3.221. pop_pass
-
-Type: string
-Default: ""
-
-Specifies the password for your POP account. If unset, Mutt will prompt you for
-your password when you open POP mailbox. Warning: you should only use this
-option when you are on a fairly secure machine, because the superuser can read
-your muttrc even if you are the only one who can read the file.
-
-3.222. post_indent_string
+3.194. post_indent_string

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 

-Similar to the ``$attribution'' variable, Mutt will append this string after
-the inclusion of a message which is being replied to.
+Similar to the $attribution variable, Mutt will append this string after the
+inclusion of a message which is being replied to.

 
 

-3.223. postpone
+3.195. postpone

 
 Type: quadoption
 Default: ask-yes
 
 
 Type: quadoption
 Default: ask-yes
 

-Controls whether or not messages are saved in the ``$postponed'' mailbox when
-you elect not to send immediately. Also see the ``$recall'' variable.
+Controls whether or not messages are saved in the $postponed mailbox when you
+elect not to send immediately.

 
 

-3.224. postponed
+Also see the $recall variable.
+
+3.196. postponed

 
 Type: path
 
 Type: path

-Default: "~/postponed"
+Default: ??/postponed?

 
 

-Mutt allows you to indefinitely ``postpone sending a message'' which you are
+Mutt allows you to indefinitely ?postpone sending a message? which you are

 editing. When you choose to postpone a message, Mutt saves it in the mailbox
 editing. When you choose to postpone a message, Mutt saves it in the mailbox

-specified by this variable. Also see the ``$postpone'' variable.
+specified by this variable.
+
+Also see the $postpone variable.

 
 

-3.225. preconnect
+3.197. preconnect

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 If set, a shell command to be executed if mutt fails to establish a connection
 to the server. This is useful for setting up secure connections, e.g. with ssh
 (1). If the command returns a nonzero status, mutt gives up opening the server.
 Example:
 
 
 If set, a shell command to be executed if mutt fails to establish a connection
 to the server. This is useful for setting up secure connections, e.g. with ssh
 (1). If the command returns a nonzero status, mutt gives up opening the server.
 Example:
 

-preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net sleep 20 < /dev/
-null > /dev/null"
+set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net \
+sleep 20 < /dev/null > /dev/null"

 
 

-Mailbox 'foo' on mailhost.net can now be reached as '{localhost:1234}foo'.
+Mailbox ?foo? on ?mailhost.net? can now be reached as ?{localhost:1234}foo?.

 
 

-NOTE: For this example to work, you must be able to log in to the remote
+Note: For this example to work, you must be able to log in to the remote

 machine without having to enter a password.
 
 machine without having to enter a password.
 

-3.226. print
+3.198. print

 
 Type: quadoption
 Default: ask-no
 
 
 Type: quadoption
 Default: ask-no
 

-Controls whether or not Mutt really prints messages. This is set to ask-no by
-default, because some people accidentally hit ``p'' often (like me).
+Controls whether or not Mutt really prints messages. This is set to ?ask-no? by
+default, because some people accidentally hit ?p? often.

 
 

-3.227. print_command
+3.199. print_command

 
 Type: path
 
 Type: path

-Default: "lpr"
+Default: ?lpr?

 
 This specifies the command pipe that should be used to print messages.
 
 
 This specifies the command pipe that should be used to print messages.
 

-3.228. print_decode
+3.200. print_decode

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-Used in connection with the print-message command. If this option is set, the
+Used in connection with the <print-message> command. If this option is set, the

 message is decoded before it is passed to the external command specified by
 $print_command. If this option is unset, no processing will be applied to the
 message when printing it. The latter setting may be useful if you are using
 some advanced printer filter which is able to properly format e-mail messages
 for printing.
 
 message is decoded before it is passed to the external command specified by
 $print_command. If this option is unset, no processing will be applied to the
 message when printing it. The latter setting may be useful if you are using
 some advanced printer filter which is able to properly format e-mail messages
 for printing.
 

-3.229. print_split
+3.201. print_split

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-Used in connection with the print-message command. If this option is set, the
+Used in connection with the <print-message> command. If this option is set, the

 command specified by $print_command is executed once for each message which is
 to be printed. If this option is unset, the command specified by $print_command
 is executed only once, and all the messages are concatenated, with a form feed
 command specified by $print_command is executed once for each message which is
 to be printed. If this option is unset, the command specified by $print_command
 is executed only once, and all the messages are concatenated, with a form feed


@@ -7702,161 +8240,151 @@ as the message separator.
 Those who use the enscript(1) program's mail-printing mode will most likely
 want to set this option.
 
 Those who use the enscript(1) program's mail-printing mode will most likely
 want to set this option.
 

-3.230. prompt_after
+3.202. prompt_after

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-If you use an external ``$pager'', setting this variable will cause Mutt to
-prompt you for a command when the pager exits rather than returning to the
-index menu. If unset, Mutt will return to the index menu when the external
-pager exits.
+If you use an external $pager, setting this variable will cause Mutt to prompt
+you for a command when the pager exits rather than returning to the index menu.
+If unset, Mutt will return to the index menu when the external pager exits.

 
 

-3.231. query_command
+3.203. query_command

 
 Type: path
 
 Type: path

-Default: ""
+Default: (empty)

 
 This specifies the command that mutt will use to make external address queries.
 
 This specifies the command that mutt will use to make external address queries.

-The string should contain a %s, which will be substituted with the query string
-the user types. See ``query'' for more information.
+The string should contain a ?%s?, which will be substituted with the query
+string the user types. See ?query? for more information.

 
 

-3.232. query_format
+3.204. query_format

 
 Type: string
 
 Type: string

-Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?"
-
-This variable describes the format of the `query' menu. The following
-printf-style sequences are understood:
-
-%a
-
-    destination address
-
-%c
-
-    current entry number
-
-%e
-
-    extra information *
-
-%n
-
-    destination name
-
-%t
-
-    ``*'' if current entry is tagged, a space otherwise
-
-%>X
-
-    right justify the rest of the string and pad with "X"
-
-%|X
-
-    pad to the end of the line with "X"
-
-%*X
-
-    soft-fill with character "X" as pad
-
-For an explanation of `soft-fill', see the ``$index_format'' documentation.
-
-* = can be optionally printed if nonzero, see the ``$status_format''
-documentation.
-
-3.233. quit
+Default: ?%4c %t %-25.25a %-25.25n %?e?(%e)??
+
+This variable describes the format of the ?query? menu. The following printf(3)
+-style sequences are understood:
+
++---------------------------------------------------------+
+|%a |destination address                                  |
+|---+-----------------------------------------------------|
+|%c |current entry number                                 |
+|---+-----------------------------------------------------|
+|%e |extra information *                                  |
+|---+-----------------------------------------------------|
+|%n |destination name                                     |
+|---+-----------------------------------------------------|
+|%t |?*? if current entry is tagged, a space otherwise    |
+|---+-----------------------------------------------------|
+|%>X|right justify the rest of the string and pad with ?X?|
+|---+-----------------------------------------------------|
+|%|X|pad to the end of the line with ?X?                  |
+|---+-----------------------------------------------------|
+|%*X|soft-fill with character ?X? as pad                  |
++---------------------------------------------------------+
+
+For an explanation of ?soft-fill?, see the $index_format documentation.
+
+* = can be optionally printed if nonzero, see the $status_format documentation.
+
+3.205. quit

 
 Type: quadoption
 Default: yes
 
 
 Type: quadoption
 Default: yes
 

-This variable controls whether ``quit'' and ``exit'' actually quit from mutt.
-If it set to yes, they do quit, if it is set to no, they have no effect, and if
+This variable controls whether ?quit? and ?exit? actually quit from mutt. If
+this option is set, they do quit, if it is unset, they have no effect, and if

 it is set to ask-yes or ask-no, you are prompted for confirmation when you try
 to quit.
 
 it is set to ask-yes or ask-no, you are prompted for confirmation when you try
 to quit.
 

-3.234. quote_regexp
+3.206. quote_regexp

 
 Type: regular expression
 
 Type: regular expression

-Default: "^([ \t]*[|>:}#])+"
+Default: ?^([ \t]*[|>:}#])+?

 
 

-A regular expression used in the internal-pager to determine quoted sections of
-text in the body of a message.
+A regular expression used in the internal pager to determine quoted sections of
+text in the body of a message. Quoted text may be filtered out using the
+<toggle-quoted> command, or colored according to the ?color quoted? family of
+directives.

 
 

-Note: In order to use the quotedx patterns in the internal pager, you need to
-set this to a regular expression that matches exactly the quote characters at
-the beginning of quoted lines.
+Higher levels of quoting may be colored differently (?color quoted1?, ?color
+quoted2?, etc.). The quoting level is determined by removing the last character
+from the matched text and recursively reapplying the regular expression until
+it fails to produce a match.

 
 

-3.235. read_inc
+Match detection may be overridden by the $smileys regular expression.
+
+3.207. read_inc

 
 Type: number
 Default: 10
 
 If set to a value greater than 0, Mutt will display which message it is
 currently on when reading a mailbox or when performing search actions such as
 
 Type: number
 Default: 10
 
 If set to a value greater than 0, Mutt will display which message it is
 currently on when reading a mailbox or when performing search actions such as

-search and limit. The message is printed after read_inc messages have been read
-or searched (e.g., if set to 25, Mutt will print a message when it is at
+search and limit. The message is printed after this many messages have been
+read or searched (e.g., if set to 25, Mutt will print a message when it is at

 message 25, and then again when it gets to message 50). This variable is meant
 to indicate progress when reading or searching large mailboxes which may take
 some time. When set to 0, only a single message will appear before the reading
 the mailbox.
 
 message 25, and then again when it gets to message 50). This variable is meant
 to indicate progress when reading or searching large mailboxes which may take
 some time. When set to 0, only a single message will appear before the reading
 the mailbox.
 

-Also see the ``$write_inc'' variable and the ``Tuning'' section of the manual
-for performance considerations.
+Also see the $write_inc, $net_inc and $time_inc variables and the ?tuning?
+section of the manual for performance considerations.

 
 

-3.236. read_only
+3.208. read_only

 
 Type: boolean
 Default: no
 
 If set, all folders are opened in read-only mode.
 
 
 Type: boolean
 Default: no
 
 If set, all folders are opened in read-only mode.
 

-3.237. realname
+3.209. realname

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 

-This variable specifies what "real" or "personal" name should be used when
+This variable specifies what ?real? or ?personal? name should be used when

 sending messages.
 
 By default, this is the GECOS field from /etc/passwd. Note that this variable
 will not be used when the user has set a real name in the $from variable.
 
 sending messages.
 
 By default, this is the GECOS field from /etc/passwd. Note that this variable
 will not be used when the user has set a real name in the $from variable.
 

-3.238. recall
+3.210. recall

 
 Type: quadoption
 Default: ask-yes
 
 Controls whether or not Mutt recalls postponed messages when composing a new
 
 Type: quadoption
 Default: ask-yes
 
 Controls whether or not Mutt recalls postponed messages when composing a new

-message. Also see ``$postponed''.
+message.

 
 

-Setting this variable to ``yes'' is not generally useful, and thus not
-recommended.
+Setting this variable to is not generally useful, and thus not recommended.

 
 

-3.239. record
+Also see $postponed variable.
+
+3.211. record

 
 Type: path
 
 Type: path

-Default: "~/sent"
+Default: ??/sent?

 
 This specifies the file into which your outgoing messages should be appended.
 (This is meant as the primary method for saving a copy of your messages, but
 
 This specifies the file into which your outgoing messages should be appended.
 (This is meant as the primary method for saving a copy of your messages, but

-another way to do this is using the ``my_hdr'' command to create a Bcc: field
+another way to do this is using the ?my_hdr? command to create a ?Bcc:? field

 with your email address in it.)
 
 with your email address in it.)
 

-The value of $record is overridden by the ``$force_name'' and ``$save_name''
-variables, and the ``fcc-hook'' command.
+The value of $record is overridden by the $force_name and $save_name variables,
+and the ?fcc-hook? command.

 
 

-3.240. reply_regexp
+3.212. reply_regexp

 
 Type: regular expression
 
 Type: regular expression

-Default: "^(re([\[0-9\]+])*|aw):[ \t]*"
+Default: ?^(re([\[0-9\]+])*|aw):[ \t]*?

 
 A regular expression used to recognize reply messages when threading and
 replying. The default value corresponds to the English "Re:" and the German
 "Aw:".
 
 
 A regular expression used to recognize reply messages when threading and
 replying. The default value corresponds to the English "Re:" and the German
 "Aw:".
 

-3.241. reply_self
+3.213. reply_self

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -7864,7 +8392,9 @@ Default: no
 If unset and you are replying to a message sent by you, Mutt will assume that
 you want to reply to the recipients of that message rather than to yourself.
 
 If unset and you are replying to a message sent by you, Mutt will assume that
 you want to reply to the recipients of that message rather than to yourself.
 

-3.242. reply_to
+Also see the ?alternates? command.
+
+3.214. reply_to

 
 Type: quadoption
 Default: ask-yes
 
 Type: quadoption
 Default: ask-yes


@@ -7875,7 +8405,7 @@ address in the From: header field instead. This option is useful for reading a
 mailing list that sets the Reply-To: header field to the list address and you
 want to send a private message to the author of a message.
 
 mailing list that sets the Reply-To: header field to the list address and you
 want to send a private message to the author of a message.
 

-3.243. resolve
+3.215. resolve

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -7884,28 +8414,26 @@ When set, the cursor will be automatically advanced to the next (possibly
 undeleted) message whenever a command that modifies the current message is
 executed.
 
 undeleted) message whenever a command that modifies the current message is
 executed.
 

-3.244. reverse_alias
+3.216. reverse_alias

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-This variable controls whether or not Mutt will display the "personal" name
+This variable controls whether or not Mutt will display the ?personal? name

 from your aliases in the index menu if it finds an alias that matches the
 message's sender. For example, if you have the following alias:
 
 alias juser abd30425@somewhere.net (Joe User)
 
 from your aliases in the index menu if it finds an alias that matches the
 message's sender. For example, if you have the following alias:
 
 alias juser abd30425@somewhere.net (Joe User)
 

-

 and then you receive mail which contains the following header:
 
 From: abd30425@somewhere.net
 
 and then you receive mail which contains the following header:
 
 From: abd30425@somewhere.net
 

+It would be displayed in the index menu as ?Joe User? instead of
+?abd30425@somewhere.net.? This is useful when the person's e-mail address is
+not human friendly.

 
 

-It would be displayed in the index menu as ``Joe User'' instead of
-``abd30425@somewhere.net.'' This is useful when the person's e-mail address is
-not human friendly (like CompuServe addresses).
-
-3.245. reverse_name
+3.217. reverse_name

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -7914,339 +8442,593 @@ It may sometimes arrive that you receive mail to a certain machine, move the
 messages to another machine, and reply to some the messages from there. If this
 variable is set, the default From: line of the reply messages is built using
 the address where you received the messages you are replying to if that address
 messages to another machine, and reply to some the messages from there. If this
 variable is set, the default From: line of the reply messages is built using
 the address where you received the messages you are replying to if that address

-matches your alternates. If the variable is unset, or the address that would be
-used doesn't match your alternates, the From: line will use your address on the
-current machine.
+matches your ?alternates?. If the variable is unset, or the address that would
+be used doesn't match your ?alternates?, the From: line will use your address
+on the current machine.

 
 

-3.246. reverse_realname
+Also see the ?alternates? command.
+
+3.218. reverse_realname

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-This variable fine-tunes the behaviour of the reverse_name feature. When it is
+This variable fine-tunes the behaviour of the $reverse_name feature. When it is

 set, mutt will use the address from incoming messages as-is, possibly including
 eventual real names. When it is unset, mutt will override any such real names
 set, mutt will use the address from incoming messages as-is, possibly including
 eventual real names. When it is unset, mutt will override any such real names

-with the setting of the realname variable.
+with the setting of the $realname variable.

 
 

-3.247. rfc2047_parameters
+3.219. rfc2047_parameters

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-When this variable is set, Mutt will decode RFC-2047-encoded MIME parameters.
+When this variable is set, Mutt will decode RFC2047-encoded MIME parameters.

 You want to set this variable when mutt suggests you to save attachments to
 You want to set this variable when mutt suggests you to save attachments to

-files named like this: =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
+files named like:
+
+=?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=

 
 

-When this variable is set interactively, the change doesn't have the desired
-effect before you have changed folders.
+When this variable is set interactively, the change won't be active until you
+change folders.

 
 

-Note that this use of RFC 2047's encoding is explicitly, prohibited by the
-standard, but nevertheless encountered in the wild. Also note that setting this
-parameter will not have the effect that mutt generates this kind of encoding.
-Instead, mutt will unconditionally use the encoding specified in RFC 2231.
+Note that this use of RFC2047's encoding is explicitly prohibited by the
+standard, but nevertheless encountered in the wild.

 
 

-3.248. save_address
+Also note that setting this parameter will not have the effect that mutt
+generates this kind of encoding. Instead, mutt will unconditionally use the
+encoding specified in RFC2231.
+
+3.220. save_address

 
 Type: boolean
 Default: no
 
 If set, mutt will take the sender's full address when choosing a default folder
 
 Type: boolean
 Default: no
 
 If set, mutt will take the sender's full address when choosing a default folder

-for saving a mail. If ``$save_name'' or ``$force_name'' is set too, the
-selection of the fcc folder will be changed as well.
+for saving a mail. If $save_name or $force_name is set too, the selection of
+the Fcc folder will be changed as well.

 
 

-3.249. save_empty
+3.221. save_empty

 
 Type: boolean
 Default: yes
 
 When unset, mailboxes which contain no saved messages will be removed when
 
 Type: boolean
 Default: yes
 
 When unset, mailboxes which contain no saved messages will be removed when

-closed (the exception is ``$spoolfile'' which is never removed). If set,
-mailboxes are never removed.
+closed (the exception is $spoolfile which is never removed). If set, mailboxes
+are never removed.

 
 Note: This only applies to mbox and MMDF folders, Mutt does not delete MH and
 Maildir directories.
 
 
 Note: This only applies to mbox and MMDF folders, Mutt does not delete MH and
 Maildir directories.
 

-3.250. save_history
+3.222. save_history
+
+Type: number
+Default: 0
+
+This variable controls the size of the history (per category) saved in the
+$history_file file.
+
+3.223. save_name
+
+Type: boolean
+Default: no
+
+This variable controls how copies of outgoing messages are saved. When set, a
+check is made to see if a mailbox specified by the recipient address exists
+(this is done by searching for a mailbox in the $folder directory with the
+username part of the recipient address). If the mailbox exists, the outgoing
+message will be saved to that mailbox, otherwise the message is saved to the
+$record mailbox.
+
+Also see the $force_name variable.
+
+3.224. score
+
+Type: boolean
+Default: yes
+
+When this variable is unset, scoring is turned off. This can be useful to
+selectively disable scoring for certain folders when the
+$score_threshold_delete variable and related are used.
+
+3.225. score_threshold_delete
+
+Type: number
+Default: -1
+
+Messages which have been assigned a score equal to or lower than the value of
+this variable are automatically marked for deletion by mutt. Since mutt scores
+are always greater than or equal to zero, the default setting of this variable
+will never mark a message for deletion.
+
+3.226. score_threshold_flag
+
+Type: number
+Default: 9999
+
+Messages which have been assigned a score greater than or equal to this
+variable's value are automatically marked "flagged".
+
+3.227. score_threshold_read
+
+Type: number
+Default: -1
+
+Messages which have been assigned a score equal to or lower than the value of
+this variable are automatically marked as read by mutt. Since mutt scores are
+always greater than or equal to zero, the default setting of this variable will
+never mark a message read.
+
+3.228. search_context
+
+Type: number
+Default: 0
+
+For the pager, this variable specifies the number of lines shown before search
+results. By default, search results will be top-aligned.
+
+3.229. send_charset
+
+Type: string
+Default: ?us-ascii:iso-8859-1:utf-8?
+
+A colon-delimited list of character sets for outgoing messages. Mutt will use
+the first character set into which the text can be converted exactly. If your
+$charset is not ?iso-8859-1? and recipients may not understand ?UTF-8?, it is
+advisable to include in the list an appropriate widely used standard character
+set (such as ?iso-8859-2?, ?koi8-r? or ?iso-2022-jp?) either instead of or
+after ?iso-8859-1?.
+
+In case the text cannot be converted into one of these exactly, mutt uses
+$charset as a fallback.
+
+3.230. sendmail
+
+Type: path
+Default: ?/usr/sbin/sendmail -oem -oi?
+
+Specifies the program and arguments used to deliver mail sent by Mutt. Mutt
+expects that the specified program interprets additional arguments as recipient
+addresses.
+
+3.231. sendmail_wait

 
 Type: number
 Default: 0
 
 
 Type: number
 Default: 0
 

-This variable controls the size of the history saved in the ``$history_file''
-file.
+Specifies the number of seconds to wait for the $sendmail process to finish
+before giving up and putting delivery in the background.
+
+Mutt interprets the value of this variable as follows:
+
++---------------------------------------------------------------------+
+|>0|number of seconds to wait for sendmail to finish before continuing|
+|--+------------------------------------------------------------------|
+|0 |wait forever for sendmail to finish                               |
+|--+------------------------------------------------------------------|
+|<0|always put sendmail in the background without waiting             |
++---------------------------------------------------------------------+
+
+Note that if you specify a value other than 0, the output of the child process
+will be put in a temporary file. If there is some error, you will be informed
+as to where to find the output.
+
+3.232. shell
+
+Type: path
+Default: (empty)
+
+Command to use when spawning a subshell. By default, the user's login shell
+from /etc/passwd is used.
+
+3.233. sig_dashes
+
+Type: boolean
+Default: yes
+
+If set, a line containing ?-- ? (note the trailing space) will be inserted
+before your $signature. It is strongly recommended that you not unset this
+variable unless your signature contains just your name. The reason for this is
+because many software packages use ?-- \n? to detect your signature. For
+example, Mutt has the ability to highlight the signature in a different color
+in the builtin pager.
+
+3.234. sig_on_top
+
+Type: boolean
+Default: no
+
+If set, the signature will be included before any quoted or forwarded text. It
+is strongly recommended that you do not set this variable unless you really
+know what you are doing, and are prepared to take some heat from netiquette
+guardians.
+
+3.235. signature
+
+Type: path
+Default: ??/.signature?
+
+Specifies the filename of your signature, which is appended to all outgoing
+messages. If the filename ends with a pipe (?|?), it is assumed that filename
+is a shell command and input should be read from its standard output.
+
+3.236. simple_search
+
+Type: string
+Default: ??f %s | ?s %s?
+
+Specifies how Mutt should expand a simple search into a real search pattern. A
+simple search is one that does not contain any of the ??? pattern operators.
+See ?patterns? for more information on search patterns.
+
+For example, if you simply type ?joe? at a search or limit prompt, Mutt will
+automatically expand it to the value specified by this variable by replacing
+?%s? with the supplied string. For the default value, ?joe? would be expanded
+to: ??f joe | ?s joe?.
+
+3.237. sleep_time
+
+Type: number
+Default: 1
+
+Specifies time, in seconds, to pause while displaying certain informational
+messages, while moving from folder to folder and after expunging messages from
+the current folder. The default is to pause one second, so a value of zero for
+this option suppresses the pause.
+
+3.238. smart_wrap
+
+Type: boolean
+Default: yes
+
+Controls the display of lines longer than the screen width in the internal
+pager. If set, long lines are wrapped at a word boundary. If unset, lines are
+simply wrapped at the screen edge. Also see the $markers variable.
+
+3.239. smileys
+
+Type: regular expression
+Default: ?(>From )|(:[-^]?[][)(><}{|/DP])?
+
+The pager uses this variable to catch some common false positives of
+$quote_regexp, most notably smileys and not consider a line quoted text if it
+also matches $smileys. This mostly happens at the beginning of a line.
+
+3.240. smime_ask_cert_label
+
+Type: boolean
+Default: yes
+
+This flag controls whether you want to be asked to enter a label for a
+certificate about to be added to the database or not. It is set by default. (S/
+MIME only)
+
+3.241. smime_ca_location
+
+Type: path
+Default: (empty)
+
+This variable contains the name of either a directory, or a file which contains
+trusted certificates for use with OpenSSL. (S/MIME only)
+
+3.242. smime_certificates
+
+Type: path
+Default: (empty)
+
+Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
+storage and retrieval of keys by itself. This is very basic right now, and keys
+and certificates are stored in two different directories, both named as the
+hash-value retrieved from OpenSSL. There is an index file which contains
+mailbox-address keyid pairs, and which can be manually edited. This option
+points to the location of the certificates. (S/MIME only)
+
+3.243. smime_decrypt_command

 
 

-3.251. save_name
+Type: string
+Default: (empty)

 
 

-Type: boolean
-Default: no
+This format string specifies a command which is used to decrypt application/
+x-pkcs7-mime attachments.

 
 

-This variable controls how copies of outgoing messages are saved. When set, a
-check is made to see if a mailbox specified by the recipient address exists
-(this is done by searching for a mailbox in the ``$folder'' directory with the
-username part of the recipient address). If the mailbox exists, the outgoing
-message will be saved to that mailbox, otherwise the message is saved to the ``
-$record'' mailbox.
+The OpenSSL command formats have their own set of printf(3)-like sequences
+similar to PGP's:
+
++-----------------------------------------------------------------------------+
+|%f|Expands to the name of a file containing a message.                       |
+|--+--------------------------------------------------------------------------|
+|%s|Expands to the name of a file containing the signature part of a multipart|
+|  |/signed attachment when verifying it.                                     |
+|--+--------------------------------------------------------------------------|
+|%k|The key-pair specified with $smime_default_key                            |
+|--+--------------------------------------------------------------------------|
+|%c|One or more certificate IDs.                                              |
+|--+--------------------------------------------------------------------------|
+|%a|The algorithm used for encryption.                                        |
+|--+--------------------------------------------------------------------------|
+|  |CA location: Depending on whether $smime_ca_location points to a directory|
+|%C|or file, this expands to ?-CApath $smime_ca_location? or ?-CAfile         |
+|  |$smime_ca_location?.                                                      |
++-----------------------------------------------------------------------------+

 
 

-Also see the ``$force_name'' variable.
+For examples on how to configure these formats, see the smime.rc in the samples
+/ subdirectory which has been installed on your system alongside the
+documentation. (S/MIME only)

 
 

-3.252. score
+3.244. smime_decrypt_use_default_key

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-When this variable is unset, scoring is turned off. This can be useful to
-selectively disable scoring for certain folders when the ``
-$score_threshold_delete'' variable and friends are used.
+If set (default) this tells mutt to use the default key for decryption.
+Otherwise, if managing multiple certificate-key-pairs, mutt will try to use the
+mailbox-address to determine the key to use. It will ask you to supply a key,
+if it can't find one. (S/MIME only)

 
 

-3.253. score_threshold_delete
+3.245. smime_default_key

 
 

-Type: number
-Default: -1
+Type: string
+Default: (empty)

 
 

-Messages which have been assigned a score equal to or lower than the value of
-this variable are automatically marked for deletion by mutt. Since mutt scores
-are always greater than or equal to zero, the default setting of this variable
-will never mark a message for deletion.
+This is the default key-pair to use for signing. This must be set to the keyid
+(the hash-value that OpenSSL generates) to work properly (S/MIME only)

 
 

-3.254. score_threshold_flag
+3.246. smime_encrypt_command

 
 

-Type: number
-Default: 9999
+Type: string
+Default: (empty)

 
 

-Messages which have been assigned a score greater than or equal to this
-variable's value are automatically marked "flagged".
+This command is used to create encrypted S/MIME messages.

 
 

-3.255. score_threshold_read
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-Type: number
-Default: -1
+3.247. smime_encrypt_with

 
 

-Messages which have been assigned a score equal to or lower than the value of
-this variable are automatically marked as read by mutt. Since mutt scores are
-always greater than or equal to zero, the default setting of this variable will
-never mark a message read.
+Type: string
+Default: (empty)
+
+This sets the algorithm that should be used for encryption. Valid choices are
+?des?, ?des3?, ?rc2-40?, ?rc2-64?, ?rc2-128?. If unset, ?3des? (TripleDES) is
+used. (S/MIME only)

 
 

-3.256. send_charset
+3.248. smime_get_cert_command

 
 Type: string
 
 Type: string

-Default: "us-ascii:iso-8859-1:utf-8"
+Default: (empty)

 
 

-A colon-delimited list of character sets for outgoing messages. Mutt will use
-the first character set into which the text can be converted exactly. If your
-``$charset'' is not iso-8859-1 and recipients may not understand UTF-8, it is
-advisable to include in the list an appropriate widely used standard character
-set (such as iso-8859-2, koi8-r or iso-2022-jp) either instead of or after
-"iso-8859-1".
+This command is used to extract X509 certificates from a PKCS7 structure.

 
 

-In case the text cannot be converted into one of these exactly, mutt uses ``
-$charset'' as a fallback.
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-3.257. sendmail
+3.249. smime_get_cert_email_command

 
 

-Type: path
-Default: "/usr/sbin/sendmail -oem -oi"
+Type: string
+Default: (empty)

 
 

-Specifies the program and arguments used to deliver mail sent by Mutt. Mutt
-expects that the specified program interprets additional arguments as recipient
-addresses.
+This command is used to extract the mail address(es) used for storing X509
+certificates, and for verification purposes (to check whether the certificate
+was issued for the sender's mailbox).

 
 

-3.258. sendmail_wait
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-Type: number
-Default: 0
+3.250. smime_get_signer_cert_command

 
 

-Specifies the number of seconds to wait for the ``$sendmail'' process to finish
-before giving up and putting delivery in the background.
+Type: string
+Default: (empty)

 
 

-Mutt interprets the value of this variable as follows:
+This command is used to extract only the signers X509 certificate from a S/MIME
+signature, so that the certificate's owner may get compared to the email's
+?From:? field.

 
 

->0
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-    number of seconds to wait for sendmail to finish before continuing
+3.251. smime_import_cert_command

 
 

-0
+Type: string
+Default: (empty)

 
 

-    wait forever for sendmail to finish
+This command is used to import a certificate via smime_keys.

 
 

-<0
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-    always put sendmail in the background without waiting
+3.252. smime_is_default

 
 

-Note that if you specify a value other than 0, the output of the child process
-will be put in a temporary file. If there is some error, you will be informed
-as to where to find the output.
+Type: boolean
+Default: no
+
+The default behaviour of mutt is to use PGP on all auto-sign/encryption
+operations. To override and to use OpenSSL instead this must be set. However,
+this has no effect while replying, since mutt will automatically select the
+same application that was used to sign/encrypt the original message. (Note that
+this variable can be overridden by unsetting $crypt_autosmime.) (S/MIME only)

 
 

-3.259. shell
+3.253. smime_keys

 
 Type: path
 
 Type: path

-Default: ""
-
-Command to use when spawning a subshell. By default, the user's login shell
-from /etc/passwd is used.
+Default: (empty)

 
 

-3.260. sig_dashes
+Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
+storage and retrieval of keys/certs by itself. This is very basic right now,
+and stores keys and certificates in two different directories, both named as
+the hash-value retrieved from OpenSSL. There is an index file which contains
+mailbox-address keyid pair, and which can be manually edited. This option
+points to the location of the private keys. (S/MIME only)

 
 

-Type: boolean
-Default: yes
+3.254. smime_pk7out_command

 
 

-If set, a line containing ``-- '' will be inserted before your ``$signature''.
-It is strongly recommended that you not unset this variable unless your
-``signature'' contains just your name. The reason for this is because many
-software packages use ``-- \n'' to detect your signature. For example, Mutt has
-the ability to highlight the signature in a different color in the builtin
-pager.
+Type: string
+Default: (empty)

 
 

-3.261. sig_on_top
+This command is used to extract PKCS7 structures of S/MIME signatures, in order
+to extract the public X509 certificate(s).

 
 

-Type: boolean
-Default: no
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-If set, the signature will be included before any quoted or forwarded text. It
-is strongly recommended that you do not set this variable unless you really
-know what you are doing, and are prepared to take some heat from netiquette
-guardians.
+3.255. smime_sign_command

 
 

-3.262. signature
+Type: string
+Default: (empty)

 
 

-Type: path
-Default: "~/.signature"
+This command is used to created S/MIME signatures of type multipart/signed,
+which can be read by all mail clients.

 
 

-Specifies the filename of your signature, which is appended to all outgoing
-messages. If the filename ends with a pipe (``|''), it is assumed that filename
-is a shell command and input should be read from its stdout.
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-3.263. simple_search
+3.256. smime_sign_opaque_command

 
 Type: string
 
 Type: string

-Default: "~f %s | ~s %s"
+Default: (empty)

 
 

-Specifies how Mutt should expand a simple search into a real search pattern. A
-simple search is one that does not contain any of the ~ operators. See ``
-patterns'' for more information on search patterns.
+This command is used to created S/MIME signatures of type application/
+x-pkcs7-signature, which can only be handled by mail clients supporting the S/
+MIME extension.

 
 

-For example, if you simply type joe at a search or limit prompt, Mutt will
-automatically expand it to the value specified by this variable. For the
-default value it would be:
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-~f joe | ~s joe
+3.257. smime_timeout

 
 

-3.264. smart_wrap
+Type: number
+Default: 300

 
 

-Type: boolean
-Default: yes
+The number of seconds after which a cached passphrase will expire if not used.
+(S/MIME only)

 
 

-Controls the display of lines longer than the screen width in the internal
-pager. If set, long lines are wrapped at a word boundary. If unset, lines are
-simply wrapped at the screen edge. Also see the ``$markers'' variable.
+3.258. smime_verify_command

 
 

-3.265. smileys
+Type: string
+Default: (empty)

 
 

-Type: regular expression
-Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
+This command is used to verify S/MIME signatures of type multipart/signed.

 
 

-The pager uses this variable to catch some common false positives of ``
-$quote_regexp'', most notably smileys in the beginning of a line
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-3.266. sleep_time
+3.259. smime_verify_opaque_command

 
 

-Type: number
-Default: 1
+Type: string
+Default: (empty)

 
 

-Specifies time, in seconds, to pause while displaying certain informational
-messages, while moving from folder to folder and after expunging messages from
-the current folder. The default is to pause one second, so a value of zero for
-this option suppresses the pause.
+This command is used to verify S/MIME signatures of type application/
+x-pkcs7-mime.
+
+This is a format string, see the $smime_decrypt_command command for possible
+printf(3)-like sequences. (S/MIME only)

 
 

-3.267. smtp_authenticators
+3.260. smtp_authenticators

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 This is a colon-delimited list of authentication methods mutt may attempt to
 use to log in to an SMTP server, in the order mutt should try them.
 
 This is a colon-delimited list of authentication methods mutt may attempt to
 use to log in to an SMTP server, in the order mutt should try them.

-Authentication methods are any SASL mechanism, eg ``digest-md5'', ``gssapi'' or
-``cram-md5''. This parameter is case-insensitive. If this parameter is unset
-(the default) mutt will try all available methods, in order from most-secure to
-least-secure.
+Authentication methods are any SASL mechanism, eg ?digest-md5?, ?gssapi? or
+?cram-md5?. This option is case-insensitive. If it is ?unset? (the default)
+mutt will try all available methods, in order from most-secure to least-secure.

 
 

-Example: set smtp_authenticators="digest-md5:cram-md5"
+Example:
+
+set smtp_authenticators="digest-md5:cram-md5"

 
 

-3.268. smtp_pass
+3.261. smtp_pass

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 Specifies the password for your SMTP account. If unset, Mutt will prompt you
 
 Specifies the password for your SMTP account. If unset, Mutt will prompt you

-for your password when you first send mail via SMTP. See ``smtp_url'' to
-configure mutt to send mail via SMTP. Warning: you should only use this option
-when you are on a fairly secure machine, because the superuser can read your
-muttrc even if you are the only one who can read the file.
+for your password when you first send mail via SMTP. See $smtp_url to configure
+mutt to send mail via SMTP.

 
 

-3.269. smtp_url
+Warning: you should only use this option when you are on a fairly secure
+machine, because the superuser can read your muttrc even if you are the only
+one who can read the file.
+
+3.262. smtp_url

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 

-Defines the SMTP ``smart'' host where sent messages should relayed for
-delivery. This should take the form of an SMTP URL, eg:
+Defines the SMTP smarthost where sent messages should relayed for delivery.
+This should take the form of an SMTP URL, eg:

 
 smtp[s]://[user[:pass]@]host[:port]/
 
 
 smtp[s]://[user[:pass]@]host[:port]/
 

-Setting this variable overrides the value of the ``$sendmail'' variable.
+where ?[...]? denotes an optional part. Setting this variable overrides the
+value of the $sendmail variable.

 
 

-3.270. sort
+3.263. sort

 
 Type: sort order
 Default: date
 
 
 Type: sort order
 Default: date
 

-Specifies how to sort messages in the index menu. Valid values are:
+Specifies how to sort messages in the ?index? menu. Valid values are:
+
+  * date or date-sent

 
 

-   date or date-sent
-   date-received
-   from
-   mailbox-order (unsorted)
-   score
-   size
-   spam
-   subject
-   threads
-   to
+  * date-received

 
 

+  * from

 
 

-You may optionally use the reverse- prefix to specify reverse sorting order
-(example: set sort=reverse-date-sent).
+  * mailbox-order (unsorted)

 
 

-3.271. sort_alias
+  * score
+
+  * size
+
+  * spam
+
+  * subject
+
+  * threads
+
+  * to
+
+You may optionally use the ?reverse-? prefix to specify reverse sorting order
+(example: ?set sort=reverse-date-sent?).
+
+3.264. sort_alias

 
 Type: sort order
 Default: alias
 
 
 Type: sort order
 Default: alias
 

-Specifies how the entries in the `alias' menu are sorted. The following are
+Specifies how the entries in the ?alias? menu are sorted. The following are

 legal values:
 
 legal values:
 

-   address (sort alphabetically by email address)
-   alias (sort alphabetically by alias name)
-   unsorted (leave in order specified in .muttrc)
+  * address (sort alphabetically by email address)
+
+  * alias (sort alphabetically by alias name)

 
 

+  * unsorted (leave in order specified in .muttrc)

 
 

-3.272. sort_aux
+3.265. sort_aux

 
 Type: sort order
 Default: date
 
 When sorting by threads, this variable controls how threads are sorted in
 relation to other threads, and how the branches of the thread trees are sorted.
 
 Type: sort order
 Default: date
 
 When sorting by threads, this variable controls how threads are sorted in
 relation to other threads, and how the branches of the thread trees are sorted.

-This can be set to any value that ``$sort'' can, except threads (in that case,
-mutt will just use date-sent). You can also specify the last- prefix in
-addition to the reverse- prefix, but last- must come after reverse-. The last-
-prefix causes messages to be sorted against its siblings by which has the last
-descendant, using the rest of sort_aux as an ordering. For instance, set
-sort_aux=last- date-received would mean that if a new message is received in a
-thread, that thread becomes the last one displayed (or the first, if you have
-set sort=reverse-threads.) Note: For reversed ``$sort'' order $sort_aux is
-reversed again (which is not the right thing to do, but kept to not break any
-existing configuration setting).
-
-3.273. sort_browser
+This can be set to any value that $sort can, except ?threads? (in that case,
+mutt will just use ?date-sent?). You can also specify the ?last-? prefix in
+addition to the ?reverse-? prefix, but ?last-? must come after ?reverse-?. The
+?last-? prefix causes messages to be sorted against its siblings by which has
+the last descendant, using the rest of $sort_aux as an ordering. For instance,
+
+set sort_aux=last-date-received
+
+would mean that if a new message is received in a thread, that thread becomes
+the last one displayed (or the first, if you have ?set sort=reverse-threads?.)
+
+Note: For reversed $sort order $sort_aux is reversed again (which is not the
+right thing to do, but kept to not break any existing configuration setting).
+
+3.266. sort_browser

 
 Type: sort order
 Default: alpha
 
 Type: sort order
 Default: alpha


@@ -8254,167 +9036,224 @@ Default: alpha
 Specifies how to sort entries in the file browser. By default, the entries are
 sorted alphabetically. Valid values:
 
 Specifies how to sort entries in the file browser. By default, the entries are
 sorted alphabetically. Valid values:
 

-   alpha (alphabetically)
-   date
-   size
-   unsorted
+  * alpha (alphabetically)

 
 

+  * date

 
 

-You may optionally use the reverse- prefix to specify reverse sorting order
-(example: set sort_browser=reverse-date).
+  * size

 
 

-3.274. sort_re
+  * unsorted
+
+You may optionally use the ?reverse-? prefix to specify reverse sorting order
+(example: ?set sort_browser=reverse-date?).
+
+3.267. sort_re

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-This variable is only useful when sorting by threads with ``$strict_threads''
-unset. In that case, it changes the heuristic mutt uses to thread messages by
-subject. With sort_re set, mutt will only attach a message as the child of
+This variable is only useful when sorting by threads with $strict_threads unset
+. In that case, it changes the heuristic mutt uses to thread messages by
+subject. With $sort_re set, mutt will only attach a message as the child of

 another message by subject if the subject of the child message starts with a
 another message by subject if the subject of the child message starts with a

-substring matching the setting of ``$reply_regexp''. With sort_re unset, mutt
-will attach the message whether or not this is the case, as long as the non-``
-$reply_regexp'' parts of both messages are identical.
+substring matching the setting of $reply_regexp. With $sort_re unset, mutt will
+attach the message whether or not this is the case, as long as the non-
+$reply_regexp parts of both messages are identical.

 
 

-3.275. spam_separator
+3.268. spam_separator

 
 Type: string
 
 Type: string

-Default: ","
+Default: ?,?

 
 

-``spam_separator'' controls what happens when multiple spam headers are
-matched: if unset, each successive header will overwrite any previous matches
-value for the spam label. If set, each successive match will append to the
-previous, using ``spam_separator'' as a separator.
+This variable controls what happens when multiple spam headers are matched: if
+unset, each successive header will overwrite any previous matches value for the
+spam label. If set, each successive match will append to the previous, using
+this variable's value as a separator.

 
 

-3.276. spoolfile
+3.269. spoolfile

 
 Type: path
 
 Type: path

-Default: ""
+Default: (empty)

 
 If your spool mailbox is in a non-default place where Mutt cannot find it, you
 
 If your spool mailbox is in a non-default place where Mutt cannot find it, you

-can specify its location with this variable. Mutt will automatically set this
-variable to the value of the environment variable $MAIL if it is not set.
-
-3.277. status_chars
-
-Type: string
-Default: "-*%A"
-
-Controls the characters used by the "%r" indicator in ``$status_format''. The
-first character is used when the mailbox is unchanged. The second is used when
-the mailbox has been changed, and it needs to be resynchronized. The third is
-used if the mailbox is in read-only mode, or if the mailbox will not be written
-when exiting that mailbox (You can toggle whether to write changes to a mailbox
-with the toggle-write operation, bound by default to "%"). The fourth is used
-to indicate that the current folder has been opened in attach- message mode
-(Certain operations like composing a new mail, replying, forwarding, etc. are
-not permitted in this mode).
-
-3.278. status_format
-
-Type: string
-Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F?
-Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
-
-Controls the format of the status line displayed in the index menu. This string
-is similar to ``$index_format'', but has its own set of printf()-like
-sequences:
+can specify its location with this variable. Mutt will initially set this
+variable to the value of the environment variable $MAIL or $MAILDIR if either
+is defined.

 
 

-%b
+3.270. ssl_ca_certificates_file

 
 

-    number of mailboxes with new mail *
-
-%d
-
-    number of deleted messages *
-
-%f
-
-    the full pathname of the current mailbox
-
-%F
-
-    number of flagged messages *
+Type: path
+Default: (empty)

 
 

-%h
+This variable specifies a file containing trusted CA certificates. Any server
+certificate that is signed with one of these CA certificates is also
+automatically accepted.

 
 

-    local hostname
+Example:

 
 

-%l
+set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt

 
 

-    size (in bytes) of the current mailbox *
+3.271. ssl_client_cert

 
 

-%L
+Type: path
+Default: (empty)

 
 

-    size (in bytes) of the messages shown (i.e., which match the current limit)
-    *
+The file containing a client certificate and its associated private key.

 
 

-%m
+3.272. ssl_force_tls

 
 

-    the number of messages in the mailbox *
+Type: boolean
+Default: no

 
 

-%M
+If this variable is set, Mutt will require that all connections to remote
+servers be encrypted. Furthermore it will attempt to negotiate TLS even if the
+server does not advertise the capability, since it would otherwise have to
+abort the connection anyway. This option supersedes $ssl_starttls.

 
 

-    the number of messages shown (i.e., which match the current limit) *
+3.273. ssl_min_dh_prime_bits

 
 

-%n
+Type: number
+Default: 0

 
 

-    number of new messages in the mailbox *
+This variable specifies the minimum acceptable prime size (in bits) for use in
+any Diffie-Hellman key exchange. A value of 0 will use the default from the
+GNUTLS library.

 
 

-%o
+3.274. ssl_starttls

 
 

-    number of old unread messages *
+Type: quadoption
+Default: yes

 
 

-%p
+If set (the default), mutt will attempt to use STARTTLS on servers advertising
+the capability. When unset, mutt will not attempt to use STARTTLS regardless of
+the server's capabilities.

 
 

-    number of postponed messages *
+3.275. ssl_use_sslv2

 
 

-%P
+Type: boolean
+Default: no

 
 

-    percentage of the way through the index
+This variable specifies whether to attempt to use SSLv2 in the SSL
+authentication process.

 
 

-%r
+3.276. ssl_use_sslv3

 
 

-    modified/read-only/won't-write/attach-message indicator, according to
-    $status_chars
+Type: boolean
+Default: yes

 
 

-%s
+This variable specifies whether to attempt to use SSLv3 in the SSL
+authentication process.

 
 

-    current sorting mode ($sort)
+3.277. ssl_use_tlsv1

 
 

-%S
+Type: boolean
+Default: yes

 
 

-    current aux sorting method ($sort_aux)
+This variable specifies whether to attempt to use TLSv1 in the SSL
+authentication process.

 
 

-%t
+3.278. ssl_usesystemcerts

 
 

-    number of tagged messages *
+Type: boolean
+Default: yes

 
 

-%u
+If set to yes, mutt will use CA certificates in the system-wide certificate
+store when checking if a server certificate is signed by a trusted CA.

 
 

-    number of unread messages *
+3.279. ssl_verify_dates

 
 

-%v
+Type: boolean
+Default: yes

 
 

-    Mutt version string
+If set (the default), mutt will not automatically accept a server certificate
+that is either not yet valid or already expired. You should only unset this for
+particular known hosts, using the <account-hook> function.

 
 

-%V
+3.280. ssl_verify_host

 
 

-    currently active limit pattern, if any *
+Type: boolean
+Default: yes

 
 

-%>X
+If set (the default), mutt will not automatically accept a server certificate
+whose host name does not match the host used in your folder URL. You should
+only unset this for particular known hosts, using the <account-hook> function.

 
 

-    right justify the rest of the string and pad with "X"
+3.281. status_chars

 
 

-%|X
+Type: string
+Default: ?-*%A?
+
+Controls the characters used by the ?%r? indicator in $status_format. The first
+character is used when the mailbox is unchanged. The second is used when the
+mailbox has been changed, and it needs to be resynchronized. The third is used
+if the mailbox is in read-only mode, or if the mailbox will not be written when
+exiting that mailbox (You can toggle whether to write changes to a mailbox with
+the <toggle-write> operation, bound by default to ?%?). The fourth is used to
+indicate that the current folder has been opened in attach- message mode
+(Certain operations like composing a new mail, replying, forwarding, etc. are
+not permitted in this mode).

 
 

-    pad to the end of the line with "X"
+3.282. status_format

 
 

-%*X
+Type: string
+Default: ?-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F?
+ Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---?

 
 

-    soft-fill with character "X" as pad
+Controls the format of the status line displayed in the ?index? menu. This
+string is similar to $index_format, but has its own set of printf(3)-like
+sequences:

 
 

-For an explanation of `soft-fill', see the ``$index_format'' documentation.
++-----------------------------------------------------------------------------+
+|%b |number of mailboxes with new mail *                                      |
+|---+-------------------------------------------------------------------------|
+|%d |number of deleted messages *                                             |
+|---+-------------------------------------------------------------------------|
+|%f |the full pathname of the current mailbox                                 |
+|---+-------------------------------------------------------------------------|
+|%F |number of flagged messages *                                             |
+|---+-------------------------------------------------------------------------|
+|%h |local hostname                                                           |
+|---+-------------------------------------------------------------------------|
+|%l |size (in bytes) of the current mailbox *                                 |
+|---+-------------------------------------------------------------------------|
+|%L |size (in bytes) of the messages shown (i.e., which match the current     |
+|   |limit) *                                                                 |
+|---+-------------------------------------------------------------------------|
+|%m |the number of messages in the mailbox *                                  |
+|---+-------------------------------------------------------------------------|
+|%M |the number of messages shown (i.e., which match the current limit) *     |
+|---+-------------------------------------------------------------------------|
+|%n |number of new messages in the mailbox *                                  |
+|---+-------------------------------------------------------------------------|
+|%o |number of old unread messages *                                          |
+|---+-------------------------------------------------------------------------|
+|%p |number of postponed messages *                                           |
+|---+-------------------------------------------------------------------------|
+|%P |percentage of the way through the index                                  |
+|---+-------------------------------------------------------------------------|
+|%r |modified/read-only/won't-write/attach-message indicator, according to    |
+|   |$status_chars                                                            |
+|---+-------------------------------------------------------------------------|
+|%s |current sorting mode ($sort)                                             |
+|---+-------------------------------------------------------------------------|
+|%S |current aux sorting method ($sort_aux)                                   |
+|---+-------------------------------------------------------------------------|
+|%t |number of tagged messages *                                              |
+|---+-------------------------------------------------------------------------|
+|%u |number of unread messages *                                              |
+|---+-------------------------------------------------------------------------|
+|%v |Mutt version string                                                      |
+|---+-------------------------------------------------------------------------|
+|%V |currently active limit pattern, if any *                                 |
+|---+-------------------------------------------------------------------------|
+|%>X|right justify the rest of the string and pad with ?X?                    |
+|---+-------------------------------------------------------------------------|
+|%|X|pad to the end of the line with ?X?                                      |
+|---+-------------------------------------------------------------------------|
+|%*X|soft-fill with character ?X? as pad                                      |
++-----------------------------------------------------------------------------+
+
+For an explanation of ?soft-fill?, see the $index_format documentation.

 
 * = can be optionally printed if nonzero
 
 
 * = can be optionally printed if nonzero
 


@@ -8432,7 +9271,9 @@ may contain other sequences as well as normal text, but you may not nest
 optional strings.
 
 Here is an example illustrating how to optionally print the number of new
 optional strings.
 
 Here is an example illustrating how to optionally print the number of new

-messages in a mailbox: %?n?%n new messages.?
+messages in a mailbox:
+
+%?n?%n new messages.?

 
 You can also switch between two strings using the following construct:
 
 
 You can also switch between two strings using the following construct:
 


@@ -8441,92 +9282,100 @@ You can also switch between two strings using the following construct:
 If the value of sequence_char is non-zero, if_string will be expanded,
 otherwise else_string will be expanded.
 
 If the value of sequence_char is non-zero, if_string will be expanded,
 otherwise else_string will be expanded.
 

-You can force the result of any printf-like sequence to be lowercase by
-prefixing the sequence character with an underscore (_) sign. For example, if
-you want to display the local hostname in lowercase, you would use: %_h
+You can force the result of any printf(3)-like sequence to be lowercase by
+prefixing the sequence character with an underscore (?_?) sign. For example, if
+you want to display the local hostname in lowercase, you would use: ?%_h?.

 
 

-If you prefix the sequence character with a colon (:) character, mutt will
+If you prefix the sequence character with a colon (?:?) character, mutt will

 replace any dots in the expansion by underscores. This might be helpful with
 IMAP folders that don't like dots in folder names.
 
 replace any dots in the expansion by underscores. This might be helpful with
 IMAP folders that don't like dots in folder names.
 

-3.279. status_on_top
+3.283. status_on_top

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-Setting this variable causes the ``status bar'' to be displayed on the first
-line of the screen rather than near the bottom.
+Setting this variable causes the ?status bar? to be displayed on the first line
+of the screen rather than near the bottom. If $help is set, too it'll be placed
+at the bottom.

 
 

-3.280. strict_threads
+3.284. strict_threads

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-If set, threading will only make use of the ``In-Reply-To'' and ``References''
-fields when you ``$sort'' by message threads. By default, messages with the
-same subject are grouped together in ``pseudo threads.''. This may not always
-be desirable, such as in a personal mailbox where you might have several
-unrelated messages with the subject ``hi'' which will get grouped together. See
-also ``$sort_re'' for a less drastic way of controlling this behaviour.
+If set, threading will only make use of the ?In-Reply-To? and ?References:?
+fields when you $sort by message threads. By default, messages with the same
+subject are grouped together in ?pseudo threads.?. This may not always be
+desirable, such as in a personal mailbox where you might have several unrelated
+messages with the subjects like ?hi? which will get grouped together. See also
+$sort_re for a less drastic way of controlling this behaviour.

 
 

-3.281. suspend
+3.285. suspend

 
 Type: boolean
 Default: yes
 
 When unset, mutt won't stop when the user presses the terminal's susp key,
 
 Type: boolean
 Default: yes
 
 When unset, mutt won't stop when the user presses the terminal's susp key,

-usually ``control-Z''. This is useful if you run mutt inside an xterm using a
-command like xterm -e mutt.
+usually ?^Z?. This is useful if you run mutt inside an xterm using a command
+like ?xterm -e mutt?.

 
 

-3.282. text_flowed
+3.286. text_flowed

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-When set, mutt will generate text/plain; format=flowed attachments. This format
-is easier to handle for some mailing software, and generally just looks like
-ordinary text. To actually make use of this format's features, you'll need
-support in your editor.
+When set, mutt will generate ?format=flowed? bodies with a content type of
+?text/plain; format=flowed?. This format is easier to handle for some mailing
+software, and generally just looks like ordinary text. To actually make use of
+this format's features, you'll need support in your editor.

 
 Note that $indent_string is ignored when this option is set.
 
 
 Note that $indent_string is ignored when this option is set.
 

-3.283. thread_received
+3.287. thorough_search

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-When set, mutt uses the date received rather than the date sent to thread
-messages by subject.
+Affects the ?b and ?h search operations described in section ?patterns?. If set
+, the headers and body/attachments of messages to be searched are decoded
+before searching. If unset, messages are searched as they appear in the folder.

 
 

-3.284. thorough_search
+Users searching attachments or for non-ASCII characters should set this value
+because decoding also includes MIME parsing/decoding and possible character set
+conversions. Otherwise mutt will attempt to match against the raw message
+received (for example quoted-printable encoded or with encoded headers) which
+may lead to incorrect search results.
+
+3.288. thread_received

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-Affects the ~b and ~h search operations described in section ``patterns''
-above. If set, the headers and attachments of messages to be searched are
-decoded before searching. If unset, messages are searched as they appear in the
-folder.
+When set, mutt uses the date received rather than the date sent to thread
+messages by subject.

 
 

-3.285. tilde
+3.289. tilde

 
 Type: boolean
 Default: no
 
 When set, the internal-pager will pad blank lines to the bottom of the screen
 
 Type: boolean
 Default: no
 
 When set, the internal-pager will pad blank lines to the bottom of the screen

-with a tilde (~).
+with a tilde (???).

 
 

-3.286. time_inc
+3.290. time_inc

 
 Type: number
 Default: 0
 
 
 Type: number
 Default: 0
 

-Along with ``read_inc'', ``write_inc'', and ``net_inc'', this variable controls
-the frequency with which progress updates are displayed. It suppresses updates
-less than ``time_inc'' milliseconds apart. This can improve throughput on
-systems with slow terminals, or when running mutt on a remote system.
+Along with $read_inc, $write_inc, and $net_inc, this variable controls the
+frequency with which progress updates are displayed. It suppresses updates less
+than $time_inc milliseconds apart. This can improve throughput on systems with
+slow terminals, or when running mutt on a remote system.
+
+Also see the ?tuning? section of the manual for performance considerations.

 
 

-3.287. timeout
+3.291. timeout

 
 Type: number
 Default: 600
 
 Type: number
 Default: 600


@@ -8541,45 +9390,58 @@ waiting for input, performs these operations and continues to wait for input.
 
 A value of zero or less will cause Mutt to never time out.
 
 
 A value of zero or less will cause Mutt to never time out.
 

-3.288. tmpdir
+3.292. tmpdir

 
 Type: path
 
 Type: path

-Default: ""
+Default: (empty)

 
 This variable allows you to specify where Mutt will place its temporary files
 needed for displaying and composing messages. If this variable is not set, the
 
 This variable allows you to specify where Mutt will place its temporary files
 needed for displaying and composing messages. If this variable is not set, the

-environment variable TMPDIR is used. If TMPDIR is not set then "/tmp" is used.
+environment variable $TMPDIR is used. If $TMPDIR is not set then ?/tmp? is
+used.

 
 

-3.289. to_chars
+3.293. to_chars

 
 Type: string
 
 Type: string

-Default: " +TCFL"
+Default: ? +TCFL?

 
 Controls the character used to indicate mail addressed to you. The first
 
 Controls the character used to indicate mail addressed to you. The first

-character is the one used when the mail is NOT addressed to your address
-(default: space). The second is used when you are the only recipient of the
-message (default: +). The third is when your address appears in the TO header
-field, but you are not the only recipient of the message (default: T). The
-fourth character is used when your address is specified in the CC header field,
-but you are not the only recipient. The fifth character is used to indicate
-mail that was sent by you. The sixth character is used to indicate when a mail
-was sent to a mailing-list you subscribe to (default: L).
+character is the one used when the mail is not addressed to your address. The
+second is used when you are the only recipient of the message. The third is
+when your address appears in the ?To:? header field, but you are not the only
+recipient of the message. The fourth character is used when your address is
+specified in the ?Cc:? header field, but you are not the only recipient. The
+fifth character is used to indicate mail that was sent by you. The sixth
+character is used to indicate when a mail was sent to a mailing-list you
+subscribe to.

 
 

-3.290. tunnel
+3.294. tunnel

 
 Type: string
 
 Type: string

-Default: ""
+Default: (empty)

 
 Setting this variable will cause mutt to open a pipe to a command instead of a
 raw socket. You may be able to use this to set up preauthenticated connections
 
 Setting this variable will cause mutt to open a pipe to a command instead of a
 raw socket. You may be able to use this to set up preauthenticated connections

-to your IMAP/POP3 server. Example:
+to your IMAP/POP3/SMTP server. Example:

 
 

-tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
+set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"

 
 

-NOTE: For this example to work you must be able to log in to the remote machine
+Note: For this example to work you must be able to log in to the remote machine

 without having to enter a password.
 
 without having to enter a password.
 

-3.291. use_8bitmime
+When set, Mutt uses the tunnel for all remote connections. Please see ?
+account-hook? in the manual for how to use different tunnel commands per
+connection.
+
+3.295. uncollapse_jump
+
+Type: boolean
+Default: no
+
+When set, Mutt will jump to the next unread message, if any, when the current
+thread is uncollapsed.
+
+3.296. use_8bitmime

 
 Type: boolean
 Default: no
 
 Type: boolean
 Default: no


@@ -8588,42 +9450,41 @@ Warning: do not set this variable unless you are using a version of sendmail
 which supports the -B8BITMIME flag (such as sendmail 8.8.x) or you may not be
 able to send mail.
 
 which supports the -B8BITMIME flag (such as sendmail 8.8.x) or you may not be
 able to send mail.
 

-When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME flag when sending
+When set, Mutt will invoke $sendmail with the -B8BITMIME flag when sending

 8-bit messages to enable ESMTP negotiation.
 
 8-bit messages to enable ESMTP negotiation.
 

-3.292. use_domain
+3.297. use_domain

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-When set, Mutt will qualify all local addresses (ones without the @host
-portion) with the value of ``$hostname''. If unset, no addresses will be
-qualified.
+When set, Mutt will qualify all local addresses (ones without the ?@host?
+portion) with the value of $hostname. If unset, no addresses will be qualified.

 
 

-3.293. use_envelope_from
+3.298. use_envelope_from

 
 Type: boolean
 Default: no
 
 
 Type: boolean
 Default: no
 

-When set, mutt will set the envelope sender of the message. If ``
-$envelope_from_address'' is set, it will be used as the sender address. If not,
-mutt will attempt to derive the sender from the "From:" header.
+When set, mutt will set the envelope sender of the message. If
+$envelope_from_address is set, it will be used as the sender address. If unset,
+mutt will attempt to derive the sender from the ?From:? header.

 
 

-Note that this information is passed to sendmail command using the "-f" command
-line switch. Therefore setting this option is not useful if the ``$sendmail''
-variable already contains "-f" or if the executable pointed to by $sendmail
-doesn't support the "-f" switch.
+Note that this information is passed to sendmail command using the -f command
+line switch. Therefore setting this option is not useful if the $sendmail
+variable already contains -f or if the executable pointed to by $sendmail
+doesn't support the -f switch.

 
 

-3.294. use_from
+3.299. use_from

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-When set, Mutt will generate the `From:' header field when sending messages. If
-unset, no `From:' header field will be generated unless the user explicitly
-sets one using the ``my_hdr'' command.
+When set, Mutt will generate the ?From:? header field when sending messages. If
+unset, no ?From:? header field will be generated unless the user explicitly
+sets one using the ?my_hdr? command.

 
 

-3.295. use_idn
+3.300. use_idn

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -8632,7 +9493,7 @@ When set, Mutt will show you international domain names decoded. Note: You can
 use IDNs for addresses even if this is unset. This variable only affects
 decoding.
 
 use IDNs for addresses even if this is unset. This variable only affects
 decoding.
 

-3.296. use_ipv6
+3.301. use_ipv6

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -8641,38 +9502,39 @@ When set, Mutt will look for IPv6 addresses of hosts it tries to contact. If
 this option is unset, Mutt will restrict itself to IPv4 addresses. Normally,
 the default should work.
 
 this option is unset, Mutt will restrict itself to IPv4 addresses. Normally,
 the default should work.
 

-3.297. user_agent
+3.302. user_agent

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-When set, mutt will add a "User-Agent" header to outgoing messages, indicating
+When set, mutt will add a ?User-Agent:? header to outgoing messages, indicating

 which version of mutt was used for composing them.
 
 which version of mutt was used for composing them.
 

-3.298. visual
+3.303. visual

 
 Type: path
 
 Type: path

-Default: ""
+Default: (empty)

 
 

-Specifies the visual editor to invoke when the ~v command is given in the
+Specifies the visual editor to invoke when the ??v? command is given in the

 builtin editor.
 
 builtin editor.
 

-3.299. wait_key
+3.304. wait_key

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-Controls whether Mutt will ask you to press a key after shell- escape,
-pipe-message, pipe-entry, print-message, and print-entry commands.
+Controls whether Mutt will ask you to press a key after an external command has
+been invoked by these functions: <shell-escape>, <pipe-message>, <pipe-entry>,
+<print-message>, and <print-entry> commands.

 
 

-It is also used when viewing attachments with ``auto_view'', provided that the
+It is also used when viewing attachments with ?auto_view?, provided that the

 corresponding mailcap entry has a needsterminal flag, and the external program
 is interactive.
 
 When set, Mutt will always ask for a key. When unset, Mutt will wait for a key
 only if the external command returned a non-zero status.
 
 corresponding mailcap entry has a needsterminal flag, and the external program
 is interactive.
 
 When set, Mutt will always ask for a key. When unset, Mutt will wait for a key
 only if the external command returned a non-zero status.
 

-3.300. weed
+3.305. weed

 
 Type: boolean
 Default: yes
 
 Type: boolean
 Default: yes


@@ -8680,7 +9542,7 @@ Default: yes
 When set, mutt will weed headers when displaying, forwarding, printing, or
 replying to messages.
 
 When set, mutt will weed headers when displaying, forwarding, printing, or
 replying to messages.
 

-3.301. wrap
+3.306. wrap

 
 Type: number
 Default: 0
 
 Type: number
 Default: 0


@@ -8689,43 +9551,44 @@ When set to a positive value, mutt will wrap text at $wrap characters. When set
 to a negative value, mutt will wrap text so that there are $wrap characters of
 empty space on the right side of the terminal.
 
 to a negative value, mutt will wrap text so that there are $wrap characters of
 empty space on the right side of the terminal.
 

-3.302. wrap_search
+3.307. wrap_search

 
 Type: boolean
 Default: yes
 
 
 Type: boolean
 Default: yes
 

-Controls whether searches wrap around the end of the mailbox.
+Controls whether searches wrap around the end.

 
 

-When set, searches will wrap around the first (or last) message. When unset,
-searches will not wrap.
+When set, searches will wrap around the first (or last) item. When unset,
+incremental searches will not wrap.

 
 

-3.303. wrapmargin
+3.308. wrapmargin

 
 Type: number
 Default: 0
 
 
 Type: number
 Default: 0
 

-(DEPRECATED) Equivalent to setting wrap with a negative value.
+(DEPRECATED) Equivalent to setting $wrap with a negative value.
+
+3.309. write_bcc
+
+Type: boolean
+Default: yes
+
+Controls whether mutt writes out the ?Bcc:? header when preparing messages to
+be sent. Exim users may wish to unset this. If mutt is set to deliver directly
+via SMTP (see $smtp_url), this option does nothing: mutt will never write out
+the ?Bcc:? header in this case.

 
 

-3.304. write_inc
+3.310. write_inc

 
 Type: number
 Default: 10
 
 
 Type: number
 Default: 10
 

-When writing a mailbox, a message will be printed every write_inc messages to
+When writing a mailbox, a message will be printed every $write_inc messages to

 indicate progress. If set to 0, only a single message will be displayed before
 writing a mailbox.
 
 indicate progress. If set to 0, only a single message will be displayed before
 writing a mailbox.
 

-Also see the ``$read_inc'' variable.
-
-3.305. write_bcc
-
-Type: boolean
-Default: yes
-
-Controls whether mutt writes out the Bcc header when preparing messages to be
-sent. Exim users may wish to unset this. If mutt is set to deliver directly via
-SMTP (see ``$smtp_url''), this option does nothing: mutt will never write out
-the BCC header in this case.
+Also see the $read_inc, $net_inc and $time_inc variables and the ?tuning?
+section of the manual for performance considerations.

 
 4. Functions
 
 
 4. Functions
 


@@ -8734,756 +9597,773 @@ they are available. The default key setting is given, and an explanation of
 what the function does. The key bindings of these functions can be changed with
 the bind command.
 
 what the function does. The key bindings of these functions can be changed with
 the bind command.
 

-4.1. generic
+4.1. Generic Menu

 
 The generic menu is not a real menu, but specifies common functions (such as
 movement) available in all menus except for pager and editor. Changing settings
 for this menu will affect the default bindings for all menus (except as noted).
 
 
 The generic menu is not a real menu, but specifies common functions (such as
 movement) available in all menus except for pager and editor. Changing settings
 for this menu will affect the default bindings for all menus (except as noted).
 

-Table 8.2. Default generic function bindings
-
-┌───────────────┬───────────┬───────────────────────────────────────────┐
-│   Function    │Default key│                Description                │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│top-page       │H          │move to the top of the page                │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│next-entry     │j          │move to the next entry                     │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│previous-entry │k          │move to the previous entry                 │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│bottom-page    │L          │move to the bottom of the page             │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│refresh        │^L         │clear and redraw the screen                │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│middle-page    │M          │move to the middle of the page             │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│search-next    │n          │search for next match                      │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│exit           │q          │exit this menu                             │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│tag-entry      │t          │tag the current entry                      │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│next-page      │z          │move to the next page                      │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│previous-page  │Z          │move to the previous page                  │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│last-entry     │*          │move to the last entry                     │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│first-entry    │=          │move to the first entry                    │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│enter-command  │:          │enter a muttrc command                     │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│next-line      │>          │scroll down one line                       │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│previous-line  │<          │scroll up one line                         │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│half-up        │[          │scroll up 1/2 page                         │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│half-down      │]          │scroll down 1/2 page                       │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│help           │?          │this screen                                │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│tag-prefix     │;          │apply next function to tagged messages     │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│tag-prefix-cond│not bound  │apply next function ONLY to tagged messages│
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│end-cond       │not bound  │end of conditional execution (noop)        │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│shell-escape   │!          │invoke a command in a subshell             │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│select-entry   │RET        │select the current entry                   │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│search         │/          │search for a regular expression            │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│search-reverse │ESC /      │search backwards for a regular expression  │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│search-opposite│not bound  │search for next match in opposite direction│
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│jump           │not bound  │jump to an index number                    │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│current-top    │not bound  │move entry to top of screen                │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│current-middle │not bound  │move entry to middle of screen             │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│current-bottom │not bound  │move entry to bottom of screen             │
-├───────────────┼───────────┼───────────────────────────────────────────┤
-│what-key       │not bound  │display the keycode for a key press        │
-└───────────────┴───────────┴───────────────────────────────────────────┘
-
-
-4.2. index
-
-Table 8.3. Default index function bindings
-
-┌────────────────────────┬─────────┬──────────────────────────────────────────┐
-│        Function        │ Default │               Description                │
-│                        │   key   │                                          │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│create-alias            │a        │create an alias from a message sender     │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│bounce-message          │b        │remail a message to another user          │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│break-thread            │#        │break the thread in two                   │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│change-folder           │c        │open a different folder                   │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│change-folder-readonly  │ESC c    │open a different folder in read only mode │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│next-unread-mailbox     │not bound│open next mailbox with new mail           │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│collapse-thread         │ESC v    │collapse/uncollapse current thread        │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│collapse-all            │ESC V    │collapse/uncollapse all threads           │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│copy-message            │C        │copy a message to a file/mailbox          │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│decode-copy             │ESC C    │make decoded (text/plain) copy            │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│decode-save             │ESC s    │make decoded copy (text/plain) and delete │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│delete-message          │d        │delete the current entry                  │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│delete-pattern          │D        │delete messages matching a pattern        │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│delete-thread           │^D       │delete all messages in thread             │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│delete-subthread        │ESC d    │delete all messages in subthread          │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│edit                    │e        │edit the raw message                      │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│edit-type               │^E       │edit attachment content type              │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│forward-message         │f        │forward a message with comments           │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│flag-message            │F        │toggle a message's 'important' flag       │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│group-reply             │g        │reply to all recipients                   │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│fetch-mail              │G        │retrieve mail from POP server             │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│imap-fetch-mail         │not bound│force retrieval of mail from IMAP server  │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│display-toggle-weed     │h        │display message and toggle header weeding │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│next-undeleted          │j        │move to the next undeleted message        │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│previous-undeleted      │k        │move to the previous undeleted message    │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│limit                   │l        │show only messages matching a pattern     │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│link-threads            │&        │link tagged message to the current one    │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│list-reply              │L        │reply to specified mailing list           │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│mail                    │m        │compose a new mail message                │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│toggle-new              │N        │toggle a message's 'new' flag             │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│toggle-write            │%        │toggle whether the mailbox will be        │
-│                        │         │rewritten                                 │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│next-thread             │^N       │jump to the next thread                   │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│next-subthread          │ESC n    │jump to the next subthread                │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│query                   │Q        │query external program for addresses      │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│quit                    │q        │save changes to mailbox and quit          │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│reply                   │r        │reply to a message                        │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│show-limit              │ESC l    │show currently active limit pattern       │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│sort-mailbox            │o        │sort messages                             │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│sort-reverse            │O        │sort messages in reverse order            │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│print-message           │p        │print the current entry                   │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│previous-thread         │^P       │jump to previous thread                   │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│previous-subthread      │ESC p    │jump to previous subthread                │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│recall-message          │R        │recall a postponed message                │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│read-thread             │^R       │mark the current thread as read           │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│read-subthread          │ESC r    │mark the current subthread as read        │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│resend-message          │ESC e    │use the current message as a template for │
-│                        │         │a new one                                 │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│save-message            │s        │save message/attachment to a file         │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│tag-pattern             │T        │tag messages matching a pattern           │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│tag-subthread           │not bound│tag the current subthread                 │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│tag-thread              │ESC t    │tag the current thread                    │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│untag-pattern           │^T       │untag messages matching a pattern         │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│undelete-message        │u        │undelete the current entry                │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│undelete-pattern        │U        │undelete messages matching a pattern      │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│undelete-subthread      │ESC u    │undelete all messages in subthread        │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│undelete-thread         │^U       │undelete all messages in thread           │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│view-attachments        │v        │show MIME attachments                     │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│show-version            │V        │show the Mutt version number and date     │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│set-flag                │w        │set a status flag on a message            │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│clear-flag              │W        │clear a status flag from a message        │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│display-message         │RET      │display a message                         │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│buffy-list              │.        │list mailboxes with new mail              │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│sync-mailbox            │$        │save changes to mailbox                   │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│display-address         │@        │display full address of sender            │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│pipe-message            │|        │pipe message/attachment to a shell command│
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│next-new                │not bound│jump to the next new message              │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│next-new-then-unread    │TAB      │jump to the next new or unread message    │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│previous-new            │not bound│jump to the previous new message          │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│previous-new-then-unread│ESC TAB  │jump to the previous new or unread message│
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│next-unread             │not bound│jump to the next unread message           │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│previous-unread         │not bound│jump to the previous unread message       │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│parent-message          │P        │jump to parent message in thread          │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│extract-keys            │^K       │extract supported public keys             │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│forget-passphrase       │^F       │wipe passphrase(s) from memory            │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│check-traditional-pgp   │ESC P    │check for classic PGP                     │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│mail-key                │ESC k    │mail a PGP public key                     │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│decrypt-copy            │not bound│make decrypted copy                       │
-├────────────────────────┼─────────┼──────────────────────────────────────────┤
-│decrypt-save            │not bound│make decrypted copy and delete            │
-└────────────────────────┴─────────┴──────────────────────────────────────────┘
-
-
-4.3. pager
-
-Table 8.4. Default pager function bindings
-
-┌──────────────────────┬─────────┬────────────────────────────────────────────┐
-│       Function       │ Default │                Description                 │
-│                      │   key   │                                            │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│break-thread          │#        │break the thread in two                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│create-alias          │a        │create an alias from a message sender       │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│bounce-message        │b        │remail a message to another user            │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│change-folder         │c        │open a different folder                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│change-folder-readonly│ESC c    │open a different folder in read only mode   │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│next-unread-mailbox   │not bound│open next mailbox with new mail             │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│copy-message          │C        │copy a message to a file/mailbox            │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│decode-copy           │ESC C    │make decoded (text/plain) copy              │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│delete-message        │d        │delete the current entry                    │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│delete-thread         │^D       │delete all messages in thread               │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│delete-subthread      │ESC d    │delete all messages in subthread            │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│edit                  │e        │edit the raw message                        │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│edit-type             │^E       │edit attachment content type                │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│forward-message       │f        │forward a message with comments             │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│flag-message          │F        │toggle a message's 'important' flag         │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│group-reply           │g        │reply to all recipients                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│imap-fetch-mail       │not bound│force retrieval of mail from IMAP server    │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│display-toggle-weed   │h        │display message and toggle header weeding   │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│next-undeleted        │j        │move to the next undeleted message          │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│next-entry            │J        │move to the next entry                      │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│previous-undeleted    │k        │move to the previous undeleted message      │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│previous-entry        │K        │move to the previous entry                  │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│link-threads          │&        │link tagged message to the current one      │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│list-reply            │L        │reply to specified mailing list             │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│redraw-screen         │^L       │clear and redraw the screen                 │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│mail                  │m        │compose a new mail message                  │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│mark-as-new           │N        │toggle a message's 'new' flag               │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│search-next           │n        │search for next match                       │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│next-thread           │^N       │jump to the next thread                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│next-subthread        │ESC n    │jump to the next subthread                  │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│print-message         │p        │print the current entry                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│previous-thread       │^P       │jump to previous thread                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│previous-subthread    │ESC p    │jump to previous subthread                  │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│quit                  │Q        │save changes to mailbox and quit            │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│exit                  │q        │exit this menu                              │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│reply                 │r        │reply to a message                          │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│recall-message        │R        │recall a postponed message                  │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│read-thread           │^R       │mark the current thread as read             │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│read-subthread        │ESC r    │mark the current subthread as read          │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│resend-message        │ESC e    │use the current message as a template for a │
-│                      │         │new one                                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│save-message          │s        │save message/attachment to a file           │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│skip-quoted           │S        │skip beyond quoted text                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│decode-save           │ESC s    │make decoded copy (text/plain) and delete   │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│tag-message           │t        │tag the current entry                       │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│toggle-quoted         │T        │toggle display of quoted text               │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│undelete-message      │u        │undelete the current entry                  │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│undelete-subthread    │ESC u    │undelete all messages in subthread          │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│undelete-thread       │^U       │undelete all messages in thread             │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│view-attachments      │v        │show MIME attachments                       │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│show-version          │V        │show the Mutt version number and date       │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│search-toggle         │\\       │toggle search pattern coloring              │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│display-address       │@        │display full address of sender              │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│next-new              │not bound│jump to the next new message                │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│pipe-message          │|        │pipe message/attachment to a shell command  │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│help                  │?        │this screen                                 │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│next-page             │Space    │move to the next page                       │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│previous-page         │-        │move to the previous page                   │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│top                   │^        │jump to the top of the message              │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│sync-mailbox          │$        │save changes to mailbox                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│shell-escape          │!        │invoke a command in a subshell              │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│enter-command         │:        │enter a muttrc command                      │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│buffy-list            │.        │list mailboxes with new mail                │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│search                │/        │search for a regular expression             │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│search-reverse        │ESC /    │search backwards for a regular expression   │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│search-opposite       │not bound│search for next match in opposite direction │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│next-line             │RET      │scroll down one line                        │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│jump                  │not bound│jump to an index number                     │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│next-unread           │not bound│jump to the next unread message             │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│previous-new          │not bound│jump to the previous new message            │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│previous-unread       │not bound│jump to the previous unread message         │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│half-up               │not bound│scroll up 1/2 page                          │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│half-down             │not bound│scroll down 1/2 page                        │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│previous-line         │not bound│scroll up one line                          │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│bottom                │not bound│jump to the bottom of the message           │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│parent-message        │P        │jump to parent message in thread            │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│check-traditional-pgp │ESC P    │check for classic PGP                       │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│mail-key              │ESC k    │mail a PGP public key                       │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│extract-keys          │^K       │extract supported public keys               │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│forget-passphrase     │^F       │wipe passphrase(s) from memory              │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│decrypt-copy          │not bound│make decrypted copy                         │
-├──────────────────────┼─────────┼────────────────────────────────────────────┤
-│decrypt-save          │not bound│make decrypted copy and delete              │
-└──────────────────────┴─────────┴────────────────────────────────────────────┘
-
-
-4.4. alias
-
-Table 8.5. Default alias function bindings
-
-┌──────────────┬───────────┬──────────────────────────┐
-│   Function   │Default key│       Description        │
-├──────────────┼───────────┼──────────────────────────┤
-│delete-entry  │d          │delete the current entry  │
-├──────────────┼───────────┼──────────────────────────┤
-│undelete-entry│u          │undelete the current entry│
-└──────────────┴───────────┴──────────────────────────┘
-
-
-4.5. query
-
-Table 8.6. Default query function bindings
-
-┌────────────┬───────────┬───────────────────────────────────────────┐
-│  Function  │Default key│                Description                │
-├────────────┼───────────┼───────────────────────────────────────────┤
-│create-alias│a          │create an alias from a message sender      │
-├────────────┼───────────┼───────────────────────────────────────────┤
-│mail        │m          │compose a new mail message                 │
-├────────────┼───────────┼───────────────────────────────────────────┤
-│query       │Q          │query external program for addresses       │
-├────────────┼───────────┼───────────────────────────────────────────┤
-│query-append│A          │append new query results to current results│
-└────────────┴───────────┴───────────────────────────────────────────┘
-
-
-4.6. attach
-
-Table 8.7. Default attach function bindings
-
-┌─────────────────────┬──────────┬────────────────────────────────────────────┐
-│      Function       │ Default  │                Description                 │
-│                     │   key    │                                            │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│bounce-message       │b         │remail a message to another user            │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│display-toggle-weed  │h         │display message and toggle header weeding   │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│edit-type            │^E        │edit attachment content type                │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│print-entry          │p         │print the current entry                     │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│save-entry           │s         │save message/attachment to a file           │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│pipe-entry           │|         │pipe message/attachment to a shell command  │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│view-mailcap         │m         │force viewing of attachment using mailcap   │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│reply                │r         │reply to a message                          │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│resend-message       │ESC e     │use the current message as a template for a │
-│                     │          │new one                                     │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│group-reply          │g         │reply to all recipients                     │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│list-reply           │L         │reply to specified mailing list             │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│forward-message      │f         │forward a message with comments             │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│view-text            │T         │view attachment as text                     │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│view-attach          │RET       │view attachment using mailcap entry if      │
-│                     │          │necessary                                   │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│delete-entry         │d         │delete the current entry                    │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│undelete-entry       │u         │undelete the current entry                  │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│collapse-parts       │v         │Toggle display of subparts                  │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│check-traditional-pgp│ESC P     │check for classic PGP                       │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│extract-keys         │^K        │extract supported public keys               │
-├─────────────────────┼──────────┼────────────────────────────────────────────┤
-│forget-passphrase    │^F        │wipe passphrase(s) from memory              │
-└─────────────────────┴──────────┴────────────────────────────────────────────┘
-
-
-4.7. compose
-
-Table 8.8. Default compose function bindings
-
-┌───────────────────┬──────────┬──────────────────────────────────────────────┐
-│     Function      │ Default  │                 Description                  │
-│                   │   key    │                                              │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│attach-file        │a         │attach file(s) to this message                │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│attach-message     │A         │attach message(s) to this message             │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-bcc           │b         │edit the BCC list                             │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-cc            │c         │edit the CC list                              │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│copy-file          │C         │save message/attachment to a file             │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│detach-file        │D         │delete the current entry                      │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│toggle-disposition │^D        │toggle disposition between inline/attachment  │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-description   │d         │edit attachment description                   │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-message       │e         │edit the message                              │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-headers       │E         │edit the message with headers                 │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-file          │^X e      │edit the file to be attached                  │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-encoding      │^E        │edit attachment transfer-encoding             │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-from          │ESC f     │edit the from field                           │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-fcc           │f         │enter a file to save a copy of this message in│
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│filter-entry       │F         │filter attachment through a shell command     │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│get-attachment     │G         │get a temporary copy of an attachment         │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│display-toggle-weed│h         │display message and toggle header weeding     │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│ispell             │i         │run ispell on the message                     │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│print-entry        │l         │print the current entry                       │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-mime          │m         │edit attachment using mailcap entry           │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│new-mime           │n         │compose new attachment using mailcap entry    │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│postpone-message   │P         │save this message to send later               │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-reply-to      │r         │edit the Reply-To field                       │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│rename-file        │R         │rename/move an attached file                  │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-subject       │s         │edit the subject of this message              │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-to            │t         │edit the TO list                              │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│edit-type          │^T        │edit attachment content type                  │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│write-fcc          │w         │write the message to a folder                 │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│toggle-unlink      │u         │toggle whether to delete file after sending it│
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│toggle-recode      │not bound │toggle recoding of this attachment            │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│update-encoding    │U         │update an attachment's encoding info          │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│view-attach        │RET       │view attachment using mailcap entry if        │
-│                   │          │necessary                                     │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│send-message       │y         │send the message                              │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│pipe-entry         │|         │pipe message/attachment to a shell command    │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│attach-key         │ESC k     │attach a PGP public key                       │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│pgp-menu           │p         │show PGP options                              │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│forget-passphrase  │^F        │wipe passphrase(s) from memory                │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│smime-menu         │S         │show S/MIME options                           │
-├───────────────────┼──────────┼──────────────────────────────────────────────┤
-│mix                │M         │send the message through a mixmaster remailer │
-│                   │          │chain                                         │
-└───────────────────┴──────────┴──────────────────────────────────────────────┘
-
-
-4.8. postpone
-
-Table 8.9. Default postpone function bindings
-
-┌──────────────┬───────────┬──────────────────────────┐
-│   Function   │Default key│       Description        │
-├──────────────┼───────────┼──────────────────────────┤
-│delete-entry  │d          │delete the current entry  │
-├──────────────┼───────────┼──────────────────────────┤
-│undelete-entry│u          │undelete the current entry│
-└──────────────┴───────────┴──────────────────────────┘
-
-
-4.9. browser
-
-Table 8.10. Default browser function bindings
-
-┌─────────────────┬───────────┬───────────────────────────────────────────────┐
-│    Function     │Default key│                  Description                  │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│change-dir       │c          │change directories                             │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│display-filename │@          │display the currently selected file's name     │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│enter-mask       │m          │enter a file mask                              │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│sort             │o          │sort messages                                  │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│sort-reverse     │O          │sort messages in reverse order                 │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│select-new       │N          │select a new file in this directory            │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│check-new        │not bound  │check mailboxes for new mail                   │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│toggle-mailboxes │TAB        │toggle whether to browse mailboxes or all files│
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│view-file        │Space      │view file                                      │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│buffy-list       │.          │list mailboxes with new mail                   │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│create-mailbox   │C          │create a new mailbox (IMAP only)               │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│delete-mailbox   │d          │delete the current mailbox (IMAP only)         │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│rename-mailbox   │r          │rename the current mailbox (IMAP only)         │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│subscribe        │s          │subscribe to current mailbox (IMAP only)       │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│unsubscribe      │u          │unsubscribe from current mailbox (IMAP only)   │
-├─────────────────┼───────────┼───────────────────────────────────────────────┤
-│toggle-subscribed│T          │toggle view all/subscribed mailboxes (IMAP     │
-│                 │           │only)                                          │
-└─────────────────┴───────────┴───────────────────────────────────────────────┘
-
-
-4.10. pgp
-
-Table 8.11. Default pgp function bindings
-
-┌──────────┬───────────┬───────────────────────┐
-│ Function │Default key│      Description      │
-├──────────┼───────────┼───────────────────────┤
-│verify-key│c          │verify a PGP public key│
-├──────────┼───────────┼───────────────────────┤
-│view-name │%          │view the key's user id │
-└──────────┴───────────┴───────────────────────┘
-
-
-4.11. smime
-
-Table 8.12. Default smime function bindings
-
-┌──────────┬───────────┬───────────────────────┐
-│ Function │Default key│      Description      │
-├──────────┼───────────┼───────────────────────┤
-│verify-key│c          │verify a PGP public key│
-├──────────┼───────────┼───────────────────────┤
-│view-name │%          │view the key's user id │
-└──────────┴───────────┴───────────────────────┘
-
-
-4.12. mix
-
-Table 8.13. Default mix function bindings
-
-┌──────────┬───────────┬────────────────────────────────────────┐
-│ Function │Default key│              Description               │
-├──────────┼───────────┼────────────────────────────────────────┤
-│accept    │RET        │Accept the chain constructed            │
-├──────────┼───────────┼────────────────────────────────────────┤
-│append    │a          │Append a remailer to the chain          │
-├──────────┼───────────┼────────────────────────────────────────┤
-│insert    │i          │Insert a remailer into the chain        │
-├──────────┼───────────┼────────────────────────────────────────┤
-│delete    │d          │Delete a remailer from the chain        │
-├──────────┼───────────┼────────────────────────────────────────┤
-│chain-prev│left       │Select the previous element of the chain│
-├──────────┼───────────┼────────────────────────────────────────┤
-│chain-next│right      │Select the next element of the chain    │
-└──────────┴───────────┴────────────────────────────────────────┘
-
-
-4.13. editor
-
-Table 8.14. Default editor function bindings
-
-┌───────────────┬───────────┬─────────────────────────────────────────────────┐
-│   Function    │Default key│                   Description                   │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│bol            │^A         │jump to the beginning of the line                │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│backward-char  │^B         │move the cursor one character to the left        │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│backward-word  │ESC b      │move the cursor to the beginning of the word     │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│capitalize-word│ESC c      │capitalize the word                              │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│downcase-word  │ESC l      │convert the word to lower case                   │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│upcase-word    │ESC u      │convert the word to upper case                   │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│delete-char    │^D         │delete the char under the cursor                 │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│eol            │^E         │jump to the end of the line                      │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│forward-char   │^F         │move the cursor one character to the right       │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│forward-word   │ESC f      │move the cursor to the end of the word           │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│backspace      │Backspace  │delete the char in front of the cursor           │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│kill-eol       │^K         │delete chars from cursor to end of line          │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│kill-eow       │ESC d      │delete chars from the cursor to the end of the   │
-│               │           │word                                             │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│kill-line      │^U         │delete all chars on the line                     │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│quote-char     │^V         │quote the next typed key                         │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│kill-word      │^W         │delete the word in front of the cursor           │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│complete       │TAB        │complete filename or alias                       │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│complete-query │^T         │complete address with query                      │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│buffy-cycle    │Space      │cycle among incoming mailboxes                   │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│history-up     │not bound  │scroll up through the history list               │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│history-down   │not bound  │scroll down through the history list             │
-├───────────────┼───────────┼─────────────────────────────────────────────────┤
-│transpose-chars│not bound  │transpose character under cursor with previous   │
-└───────────────┴───────────┴─────────────────────────────────────────────────┘
-
-
-Chapter 9. Miscellany
+Table 9.2. Default generic Function Bindings
+
++-------------------------------------------------------------------------+
+|    Function     |Default key|                Description                |
+|-----------------+-----------+-------------------------------------------|
+|<top-page>       |H          |move to the top of the page                |
+|-----------------+-----------+-------------------------------------------|
+|<next-entry>     |j          |move to the next entry                     |
+|-----------------+-----------+-------------------------------------------|
+|<previous-entry> |k          |move to the previous entry                 |
+|-----------------+-----------+-------------------------------------------|
+|<bottom-page>    |L          |move to the bottom of the page             |
+|-----------------+-----------+-------------------------------------------|
+|<refresh>        |^L         |clear and redraw the screen                |
+|-----------------+-----------+-------------------------------------------|
+|<middle-page>    |M          |move to the middle of the page             |
+|-----------------+-----------+-------------------------------------------|
+|<search-next>    |n          |search for next match                      |
+|-----------------+-----------+-------------------------------------------|
+|<exit>           |q          |exit this menu                             |
+|-----------------+-----------+-------------------------------------------|
+|<tag-entry>      |t          |tag the current entry                      |
+|-----------------+-----------+-------------------------------------------|
+|<next-page>      |z          |move to the next page                      |
+|-----------------+-----------+-------------------------------------------|
+|<previous-page>  |Z          |move to the previous page                  |
+|-----------------+-----------+-------------------------------------------|
+|<last-entry>     |*          |move to the last entry                     |
+|-----------------+-----------+-------------------------------------------|
+|<first-entry>    |=          |move to the first entry                    |
+|-----------------+-----------+-------------------------------------------|
+|<enter-command>  |:          |enter a muttrc command                     |
+|-----------------+-----------+-------------------------------------------|
+|<next-line>      |>          |scroll down one line                       |
+|-----------------+-----------+-------------------------------------------|
+|<previous-line>  |<          |scroll up one line                         |
+|-----------------+-----------+-------------------------------------------|
+|<half-up>        |[          |scroll up 1/2 page                         |
+|-----------------+-----------+-------------------------------------------|
+|<half-down>      |]          |scroll down 1/2 page                       |
+|-----------------+-----------+-------------------------------------------|
+|<help>           |?          |this screen                                |
+|-----------------+-----------+-------------------------------------------|
+|<tag-prefix>     |;          |apply next function to tagged messages     |
+|-----------------+-----------+-------------------------------------------|
+|<tag-prefix-cond>|           |apply next function ONLY to tagged messages|
+|-----------------+-----------+-------------------------------------------|
+|<end-cond>       |           |end of conditional execution (noop)        |
+|-----------------+-----------+-------------------------------------------|
+|<shell-escape>   |!          |invoke a command in a subshell             |
+|-----------------+-----------+-------------------------------------------|
+|<select-entry>   |<Return>   |select the current entry                   |
+|-----------------+-----------+-------------------------------------------|
+|<search>         |/          |search for a regular expression            |
+|-----------------+-----------+-------------------------------------------|
+|<search-reverse> |Esc /      |search backwards for a regular expression  |
+|-----------------+-----------+-------------------------------------------|
+|<search-opposite>|           |search for next match in opposite direction|
+|-----------------+-----------+-------------------------------------------|
+|<jump>           |           |jump to an index number                    |
+|-----------------+-----------+-------------------------------------------|
+|<current-top>    |           |move entry to top of screen                |
+|-----------------+-----------+-------------------------------------------|
+|<current-middle> |           |move entry to middle of screen             |
+|-----------------+-----------+-------------------------------------------|
+|<current-bottom> |           |move entry to bottom of screen             |
+|-----------------+-----------+-------------------------------------------|
+|<what-key>       |           |display the keycode for a key press        |
++-------------------------------------------------------------------------+
+
+
+4.2. Index Menu
+
+Table 9.3. Default index Function Bindings
+
++-----------------------------------------------------------------------------+
+|         Function         | Default |              Description               |
+|                          |   key   |                                        |
+|--------------------------+---------+----------------------------------------|
+|<create-alias>            |a        |create an alias from a message sender   |
+|--------------------------+---------+----------------------------------------|
+|<bounce-message>          |b        |remail a message to another user        |
+|--------------------------+---------+----------------------------------------|
+|<break-thread>            |#        |break the thread in two                 |
+|--------------------------+---------+----------------------------------------|
+|<change-folder>           |c        |open a different folder                 |
+|--------------------------+---------+----------------------------------------|
+|<change-folder-readonly>  |Esc c    |open a different folder in read only    |
+|                          |         |mode                                    |
+|--------------------------+---------+----------------------------------------|
+|<next-unread-mailbox>     |         |open next mailbox with new mail         |
+|--------------------------+---------+----------------------------------------|
+|<collapse-thread>         |Esc v    |collapse/uncollapse current thread      |
+|--------------------------+---------+----------------------------------------|
+|<collapse-all>            |Esc V    |collapse/uncollapse all threads         |
+|--------------------------+---------+----------------------------------------|
+|<copy-message>            |C        |copy a message to a file/mailbox        |
+|--------------------------+---------+----------------------------------------|
+|<decode-copy>             |Esc C    |make decoded (text/plain) copy          |
+|--------------------------+---------+----------------------------------------|
+|<decode-save>             |Esc s    |make decoded copy (text/plain) and      |
+|                          |         |delete                                  |
+|--------------------------+---------+----------------------------------------|
+|<delete-message>          |d        |delete the current entry                |
+|--------------------------+---------+----------------------------------------|
+|<delete-pattern>          |D        |delete messages matching a pattern      |
+|--------------------------+---------+----------------------------------------|
+|<delete-thread>           |^D       |delete all messages in thread           |
+|--------------------------+---------+----------------------------------------|
+|<delete-subthread>        |Esc d    |delete all messages in subthread        |
+|--------------------------+---------+----------------------------------------|
+|<edit>                    |e        |edit the raw message                    |
+|--------------------------+---------+----------------------------------------|
+|<edit-type>               |^E       |edit attachment content type            |
+|--------------------------+---------+----------------------------------------|
+|<forward-message>         |f        |forward a message with comments         |
+|--------------------------+---------+----------------------------------------|
+|<flag-message>            |F        |toggle a message's 'important' flag     |
+|--------------------------+---------+----------------------------------------|
+|<group-reply>             |g        |reply to all recipients                 |
+|--------------------------+---------+----------------------------------------|
+|<fetch-mail>              |G        |retrieve mail from POP server           |
+|--------------------------+---------+----------------------------------------|
+|<imap-fetch-mail>         |         |force retrieval of mail from IMAP server|
+|--------------------------+---------+----------------------------------------|
+|<display-toggle-weed>     |h        |display message and toggle header       |
+|                          |         |weeding                                 |
+|--------------------------+---------+----------------------------------------|
+|<next-undeleted>          |j        |move to the next undeleted message      |
+|--------------------------+---------+----------------------------------------|
+|<previous-undeleted>      |k        |move to the previous undeleted message  |
+|--------------------------+---------+----------------------------------------|
+|<limit>                   |l        |show only messages matching a pattern   |
+|--------------------------+---------+----------------------------------------|
+|<link-threads>            |&        |link tagged message to the current one  |
+|--------------------------+---------+----------------------------------------|
+|<list-reply>              |L        |reply to specified mailing list         |
+|--------------------------+---------+----------------------------------------|
+|<mail>                    |m        |compose a new mail message              |
+|--------------------------+---------+----------------------------------------|
+|<toggle-new>              |N        |toggle a message's 'new' flag           |
+|--------------------------+---------+----------------------------------------|
+|<toggle-write>            |%        |toggle whether the mailbox will be      |
+|                          |         |rewritten                               |
+|--------------------------+---------+----------------------------------------|
+|<next-thread>             |^N       |jump to the next thread                 |
+|--------------------------+---------+----------------------------------------|
+|<next-subthread>          |Esc n    |jump to the next subthread              |
+|--------------------------+---------+----------------------------------------|
+|<query>                   |Q        |query external program for addresses    |
+|--------------------------+---------+----------------------------------------|
+|<quit>                    |q        |save changes to mailbox and quit        |
+|--------------------------+---------+----------------------------------------|
+|<reply>                   |r        |reply to a message                      |
+|--------------------------+---------+----------------------------------------|
+|<show-limit>              |Esc l    |show currently active limit pattern     |
+|--------------------------+---------+----------------------------------------|
+|<sort-mailbox>            |o        |sort messages                           |
+|--------------------------+---------+----------------------------------------|
+|<sort-reverse>            |O        |sort messages in reverse order          |
+|--------------------------+---------+----------------------------------------|
+|<print-message>           |p        |print the current entry                 |
+|--------------------------+---------+----------------------------------------|
+|<previous-thread>         |^P       |jump to previous thread                 |
+|--------------------------+---------+----------------------------------------|
+|<previous-subthread>      |Esc p    |jump to previous subthread              |
+|--------------------------+---------+----------------------------------------|
+|<recall-message>          |R        |recall a postponed message              |
+|--------------------------+---------+----------------------------------------|
+|<read-thread>             |^R       |mark the current thread as read         |
+|--------------------------+---------+----------------------------------------|
+|<read-subthread>          |Esc r    |mark the current subthread as read      |
+|--------------------------+---------+----------------------------------------|
+|<resend-message>          |Esc e    |use the current message as a template   |
+|                          |         |for a new one                           |
+|--------------------------+---------+----------------------------------------|
+|<save-message>            |s        |save message/attachment to a mailbox/   |
+|                          |         |file                                    |
+|--------------------------+---------+----------------------------------------|
+|<tag-pattern>             |T        |tag messages matching a pattern         |
+|--------------------------+---------+----------------------------------------|
+|<tag-subthread>           |         |tag the current subthread               |
+|--------------------------+---------+----------------------------------------|
+|<tag-thread>              |Esc t    |tag the current thread                  |
+|--------------------------+---------+----------------------------------------|
+|<untag-pattern>           |^T       |untag messages matching a pattern       |
+|--------------------------+---------+----------------------------------------|
+|<undelete-message>        |u        |undelete the current entry              |
+|--------------------------+---------+----------------------------------------|
+|<undelete-pattern>        |U        |undelete messages matching a pattern    |
+|--------------------------+---------+----------------------------------------|
+|<undelete-subthread>      |Esc u    |undelete all messages in subthread      |
+|--------------------------+---------+----------------------------------------|
+|<undelete-thread>         |^U       |undelete all messages in thread         |
+|--------------------------+---------+----------------------------------------|
+|<view-attachments>        |v        |show MIME attachments                   |
+|--------------------------+---------+----------------------------------------|
+|<show-version>            |V        |show the Mutt version number and date   |
+|--------------------------+---------+----------------------------------------|
+|<set-flag>                |w        |set a status flag on a message          |
+|--------------------------+---------+----------------------------------------|
+|<clear-flag>              |W        |clear a status flag from a message      |
+|--------------------------+---------+----------------------------------------|
+|<display-message>         |<Return> |display a message                       |
+|--------------------------+---------+----------------------------------------|
+|<buffy-list>              |.        |list mailboxes with new mail            |
+|--------------------------+---------+----------------------------------------|
+|<sync-mailbox>            |$        |save changes to mailbox                 |
+|--------------------------+---------+----------------------------------------|
+|<display-address>         |@        |display full address of sender          |
+|--------------------------+---------+----------------------------------------|
+|<pipe-message>            ||        |pipe message/attachment to a shell      |
+|                          |         |command                                 |
+|--------------------------+---------+----------------------------------------|
+|<next-new>                |         |jump to the next new message            |
+|--------------------------+---------+----------------------------------------|
+|<next-new-then-unread>    |<Tab>    |jump to the next new or unread message  |
+|--------------------------+---------+----------------------------------------|
+|<previous-new>            |         |jump to the previous new message        |
+|--------------------------+---------+----------------------------------------|
+|<previous-new-then-unread>|Esc <Tab>|jump to the previous new or unread      |
+|                          |         |message                                 |
+|--------------------------+---------+----------------------------------------|
+|<next-unread>             |         |jump to the next unread message         |
+|--------------------------+---------+----------------------------------------|
+|<previous-unread>         |         |jump to the previous unread message     |
+|--------------------------+---------+----------------------------------------|
+|<parent-message>          |P        |jump to parent message in thread        |
+|--------------------------+---------+----------------------------------------|
+|<extract-keys>            |^K       |extract supported public keys           |
+|--------------------------+---------+----------------------------------------|
+|<forget-passphrase>       |^F       |wipe passphrase(s) from memory          |
+|--------------------------+---------+----------------------------------------|
+|<check-traditional-pgp>   |Esc P    |check for classic PGP                   |
+|--------------------------+---------+----------------------------------------|
+|<mail-key>                |Esc k    |mail a PGP public key                   |
+|--------------------------+---------+----------------------------------------|
+|<decrypt-copy>            |         |make decrypted copy                     |
+|--------------------------+---------+----------------------------------------|
+|<decrypt-save>            |         |make decrypted copy and delete          |
++-----------------------------------------------------------------------------+
+
+
+4.3. Pager Menu
+
+Table 9.4. Default pager Function Bindings
+
++-----------------------------------------------------------------------------+
+|        Function        | Default |               Description                |
+|                        |   key   |                                          |
+|------------------------+---------+------------------------------------------|
+|<break-thread>          |#        |break the thread in two                   |
+|------------------------+---------+------------------------------------------|
+|<create-alias>          |a        |create an alias from a message sender     |
+|------------------------+---------+------------------------------------------|
+|<bounce-message>        |b        |remail a message to another user          |
+|------------------------+---------+------------------------------------------|
+|<change-folder>         |c        |open a different folder                   |
+|------------------------+---------+------------------------------------------|
+|<change-folder-readonly>|Esc c    |open a different folder in read only mode |
+|------------------------+---------+------------------------------------------|
+|<next-unread-mailbox>   |         |open next mailbox with new mail           |
+|------------------------+---------+------------------------------------------|
+|<copy-message>          |C        |copy a message to a file/mailbox          |
+|------------------------+---------+------------------------------------------|
+|<decode-copy>           |Esc C    |make decoded (text/plain) copy            |
+|------------------------+---------+------------------------------------------|
+|<delete-message>        |d        |delete the current entry                  |
+|------------------------+---------+------------------------------------------|
+|<delete-thread>         |^D       |delete all messages in thread             |
+|------------------------+---------+------------------------------------------|
+|<delete-subthread>      |Esc d    |delete all messages in subthread          |
+|------------------------+---------+------------------------------------------|
+|<set-flag>              |w        |set a status flag on a message            |
+|------------------------+---------+------------------------------------------|
+|<clear-flag>            |W        |clear a status flag from a message        |
+|------------------------+---------+------------------------------------------|
+|<edit>                  |e        |edit the raw message                      |
+|------------------------+---------+------------------------------------------|
+|<edit-type>             |^E       |edit attachment content type              |
+|------------------------+---------+------------------------------------------|
+|<forward-message>       |f        |forward a message with comments           |
+|------------------------+---------+------------------------------------------|
+|<flag-message>          |F        |toggle a message's 'important' flag       |
+|------------------------+---------+------------------------------------------|
+|<group-reply>           |g        |reply to all recipients                   |
+|------------------------+---------+------------------------------------------|
+|<imap-fetch-mail>       |         |force retrieval of mail from IMAP server  |
+|------------------------+---------+------------------------------------------|
+|<display-toggle-weed>   |h        |display message and toggle header weeding |
+|------------------------+---------+------------------------------------------|
+|<next-undeleted>        |j        |move to the next undeleted message        |
+|------------------------+---------+------------------------------------------|
+|<next-entry>            |J        |move to the next entry                    |
+|------------------------+---------+------------------------------------------|
+|<previous-undeleted>    |k        |move to the previous undeleted message    |
+|------------------------+---------+------------------------------------------|
+|<previous-entry>        |K        |move to the previous entry                |
+|------------------------+---------+------------------------------------------|
+|<link-threads>          |&        |link tagged message to the current one    |
+|------------------------+---------+------------------------------------------|
+|<list-reply>            |L        |reply to specified mailing list           |
+|------------------------+---------+------------------------------------------|
+|<redraw-screen>         |^L       |clear and redraw the screen               |
+|------------------------+---------+------------------------------------------|
+|<mail>                  |m        |compose a new mail message                |
+|------------------------+---------+------------------------------------------|
+|<mark-as-new>           |N        |toggle a message's 'new' flag             |
+|------------------------+---------+------------------------------------------|
+|<search-next>           |n        |search for next match                     |
+|------------------------+---------+------------------------------------------|
+|<next-thread>           |^N       |jump to the next thread                   |
+|------------------------+---------+------------------------------------------|
+|<next-subthread>        |Esc n    |jump to the next subthread                |
+|------------------------+---------+------------------------------------------|
+|<print-message>         |p        |print the current entry                   |
+|------------------------+---------+------------------------------------------|
+|<previous-thread>       |^P       |jump to previous thread                   |
+|------------------------+---------+------------------------------------------|
+|<previous-subthread>    |Esc p    |jump to previous subthread                |
+|------------------------+---------+------------------------------------------|
+|<quit>                  |Q        |save changes to mailbox and quit          |
+|------------------------+---------+------------------------------------------|
+|<exit>                  |q        |exit this menu                            |
+|------------------------+---------+------------------------------------------|
+|<reply>                 |r        |reply to a message                        |
+|------------------------+---------+------------------------------------------|
+|<recall-message>        |R        |recall a postponed message                |
+|------------------------+---------+------------------------------------------|
+|<read-thread>           |^R       |mark the current thread as read           |
+|------------------------+---------+------------------------------------------|
+|<read-subthread>        |Esc r    |mark the current subthread as read        |
+|------------------------+---------+------------------------------------------|
+|<resend-message>        |Esc e    |use the current message as a template for |
+|                        |         |a new one                                 |
+|------------------------+---------+------------------------------------------|
+|<save-message>          |s        |save message/attachment to a mailbox/file |
+|------------------------+---------+------------------------------------------|
+|<skip-quoted>           |S        |skip beyond quoted text                   |
+|------------------------+---------+------------------------------------------|
+|<decode-save>           |Esc s    |make decoded copy (text/plain) and delete |
+|------------------------+---------+------------------------------------------|
+|<tag-message>           |t        |tag the current entry                     |
+|------------------------+---------+------------------------------------------|
+|<toggle-quoted>         |T        |toggle display of quoted text             |
+|------------------------+---------+------------------------------------------|
+|<undelete-message>      |u        |undelete the current entry                |
+|------------------------+---------+------------------------------------------|
+|<undelete-subthread>    |Esc u    |undelete all messages in subthread        |
+|------------------------+---------+------------------------------------------|
+|<undelete-thread>       |^U       |undelete all messages in thread           |
+|------------------------+---------+------------------------------------------|
+|<view-attachments>      |v        |show MIME attachments                     |
+|------------------------+---------+------------------------------------------|
+|<show-version>          |V        |show the Mutt version number and date     |
+|------------------------+---------+------------------------------------------|
+|<search-toggle>         |\\       |toggle search pattern coloring            |
+|------------------------+---------+------------------------------------------|
+|<display-address>       |@        |display full address of sender            |
+|------------------------+---------+------------------------------------------|
+|<next-new>              |         |jump to the next new message              |
+|------------------------+---------+------------------------------------------|
+|<pipe-message>          ||        |pipe message/attachment to a shell command|
+|------------------------+---------+------------------------------------------|
+|<help>                  |?        |this screen                               |
+|------------------------+---------+------------------------------------------|
+|<next-page>             |<Space>  |move to the next page                     |
+|------------------------+---------+------------------------------------------|
+|<previous-page>         |-        |move to the previous page                 |
+|------------------------+---------+------------------------------------------|
+|<top>                   |^        |jump to the top of the message            |
+|------------------------+---------+------------------------------------------|
+|<sync-mailbox>          |$        |save changes to mailbox                   |
+|------------------------+---------+------------------------------------------|
+|<shell-escape>          |!        |invoke a command in a subshell            |
+|------------------------+---------+------------------------------------------|
+|<enter-command>         |:        |enter a muttrc command                    |
+|------------------------+---------+------------------------------------------|
+|<buffy-list>            |.        |list mailboxes with new mail              |
+|------------------------+---------+------------------------------------------|
+|<search>                |/        |search for a regular expression           |
+|------------------------+---------+------------------------------------------|
+|<search-reverse>        |Esc /    |search backwards for a regular expression |
+|------------------------+---------+------------------------------------------|
+|<search-opposite>       |         |search for next match in opposite         |
+|                        |         |direction                                 |
+|------------------------+---------+------------------------------------------|
+|<next-line>             |<Return> |scroll down one line                      |
+|------------------------+---------+------------------------------------------|
+|<jump>                  |         |jump to an index number                   |
+|------------------------+---------+------------------------------------------|
+|<next-unread>           |         |jump to the next unread message           |
+|------------------------+---------+------------------------------------------|
+|<previous-new>          |         |jump to the previous new message          |
+|------------------------+---------+------------------------------------------|
+|<previous-unread>       |         |jump to the previous unread message       |
+|------------------------+---------+------------------------------------------|
+|<half-up>               |         |scroll up 1/2 page                        |
+|------------------------+---------+------------------------------------------|
+|<half-down>             |         |scroll down 1/2 page                      |
+|------------------------+---------+------------------------------------------|
+|<previous-line>         |         |scroll up one line                        |
+|------------------------+---------+------------------------------------------|
+|<bottom>                |         |jump to the bottom of the message         |
+|------------------------+---------+------------------------------------------|
+|<parent-message>        |P        |jump to parent message in thread          |
+|------------------------+---------+------------------------------------------|
+|<check-traditional-pgp> |Esc P    |check for classic PGP                     |
+|------------------------+---------+------------------------------------------|
+|<mail-key>              |Esc k    |mail a PGP public key                     |
+|------------------------+---------+------------------------------------------|
+|<extract-keys>          |^K       |extract supported public keys             |
+|------------------------+---------+------------------------------------------|
+|<forget-passphrase>     |^F       |wipe passphrase(s) from memory            |
+|------------------------+---------+------------------------------------------|
+|<decrypt-copy>          |         |make decrypted copy                       |
+|------------------------+---------+------------------------------------------|
+|<decrypt-save>          |         |make decrypted copy and delete            |
+|------------------------+---------+------------------------------------------|
+|<what-key>              |         |display the keycode for a key press       |
++-----------------------------------------------------------------------------+
+
+
+4.4. Alias Menu
+
+Table 9.5. Default alias Function Bindings
+
++-------------------------------------------------------+
+|    Function    |Default key|       Description        |
+|----------------+-----------+--------------------------|
+|<delete-entry>  |d          |delete the current entry  |
+|----------------+-----------+--------------------------|
+|<undelete-entry>|u          |undelete the current entry|
++-------------------------------------------------------+
+
+
+4.5. Query Menu
+
+Table 9.6. Default query Function Bindings
+
++----------------------------------------------------------------------+
+|   Function   |Default key|                Description                |
+|--------------+-----------+-------------------------------------------|
+|<create-alias>|a          |create an alias from a message sender      |
+|--------------+-----------+-------------------------------------------|
+|<mail>        |m          |compose a new mail message                 |
+|--------------+-----------+-------------------------------------------|
+|<query>       |Q          |query external program for addresses       |
+|--------------+-----------+-------------------------------------------|
+|<query-append>|A          |append new query results to current results|
++----------------------------------------------------------------------+
+
+
+4.6. Attach Menu
+
+Table 9.7. Default attach Function Bindings
+
++-----------------------------------------------------------------------------+
+|       Function        | Default |                Description                |
+|                       |   key   |                                           |
+|-----------------------+---------+-------------------------------------------|
+|<bounce-message>       |b        |remail a message to another user           |
+|-----------------------+---------+-------------------------------------------|
+|<display-toggle-weed>  |h        |display message and toggle header weeding  |
+|-----------------------+---------+-------------------------------------------|
+|<edit-type>            |^E       |edit attachment content type               |
+|-----------------------+---------+-------------------------------------------|
+|<print-entry>          |p        |print the current entry                    |
+|-----------------------+---------+-------------------------------------------|
+|<save-entry>           |s        |save message/attachment to a mailbox/file  |
+|-----------------------+---------+-------------------------------------------|
+|<pipe-entry>           ||        |pipe message/attachment to a shell command |
+|-----------------------+---------+-------------------------------------------|
+|<view-mailcap>         |m        |force viewing of attachment using mailcap  |
+|-----------------------+---------+-------------------------------------------|
+|<reply>                |r        |reply to a message                         |
+|-----------------------+---------+-------------------------------------------|
+|<resend-message>       |Esc e    |use the current message as a template for a|
+|                       |         |new one                                    |
+|-----------------------+---------+-------------------------------------------|
+|<group-reply>          |g        |reply to all recipients                    |
+|-----------------------+---------+-------------------------------------------|
+|<list-reply>           |L        |reply to specified mailing list            |
+|-----------------------+---------+-------------------------------------------|
+|<forward-message>      |f        |forward a message with comments            |
+|-----------------------+---------+-------------------------------------------|
+|<view-text>            |T        |view attachment as text                    |
+|-----------------------+---------+-------------------------------------------|
+|<view-attach>          |<Return> |view attachment using mailcap entry if     |
+|                       |         |necessary                                  |
+|-----------------------+---------+-------------------------------------------|
+|<delete-entry>         |d        |delete the current entry                   |
+|-----------------------+---------+-------------------------------------------|
+|<undelete-entry>       |u        |undelete the current entry                 |
+|-----------------------+---------+-------------------------------------------|
+|<collapse-parts>       |v        |Toggle display of subparts                 |
+|-----------------------+---------+-------------------------------------------|
+|<check-traditional-pgp>|Esc P    |check for classic PGP                      |
+|-----------------------+---------+-------------------------------------------|
+|<extract-keys>         |^K       |extract supported public keys              |
+|-----------------------+---------+-------------------------------------------|
+|<forget-passphrase>    |^F       |wipe passphrase(s) from memory             |
++-----------------------------------------------------------------------------+
+
+
+4.7. Compose Menu
+
+Table 9.8. Default compose Function Bindings
+
++-----------------------------------------------------------------------------+
+|      Function       | Default  |                Description                 |
+|                     |   key    |                                            |
+|---------------------+----------+--------------------------------------------|
+|<attach-file>        |a         |attach file(s) to this message              |
+|---------------------+----------+--------------------------------------------|
+|<attach-message>     |A         |attach message(s) to this message           |
+|---------------------+----------+--------------------------------------------|
+|<edit-bcc>           |b         |edit the BCC list                           |
+|---------------------+----------+--------------------------------------------|
+|<edit-cc>            |c         |edit the CC list                            |
+|---------------------+----------+--------------------------------------------|
+|<copy-file>          |C         |save message/attachment to a mailbox/file   |
+|---------------------+----------+--------------------------------------------|
+|<detach-file>        |D         |delete the current entry                    |
+|---------------------+----------+--------------------------------------------|
+|<toggle-disposition> |^D        |toggle disposition between inline/attachment|
+|---------------------+----------+--------------------------------------------|
+|<edit-description>   |d         |edit attachment description                 |
+|---------------------+----------+--------------------------------------------|
+|<edit-message>       |e         |edit the message                            |
+|---------------------+----------+--------------------------------------------|
+|<edit-headers>       |E         |edit the message with headers               |
+|---------------------+----------+--------------------------------------------|
+|<edit-file>          |^X e      |edit the file to be attached                |
+|---------------------+----------+--------------------------------------------|
+|<edit-encoding>      |^E        |edit attachment transfer-encoding           |
+|---------------------+----------+--------------------------------------------|
+|<edit-from>          |Esc f     |edit the from field                         |
+|---------------------+----------+--------------------------------------------|
+|<edit-fcc>           |f         |enter a file to save a copy of this message |
+|                     |          |in                                          |
+|---------------------+----------+--------------------------------------------|
+|<filter-entry>       |F         |filter attachment through a shell command   |
+|---------------------+----------+--------------------------------------------|
+|<get-attachment>     |G         |get a temporary copy of an attachment       |
+|---------------------+----------+--------------------------------------------|
+|<display-toggle-weed>|h         |display message and toggle header weeding   |
+|---------------------+----------+--------------------------------------------|
+|<ispell>             |i         |run ispell on the message                   |
+|---------------------+----------+--------------------------------------------|
+|<print-entry>        |l         |print the current entry                     |
+|---------------------+----------+--------------------------------------------|
+|<edit-mime>          |m         |edit attachment using mailcap entry         |
+|---------------------+----------+--------------------------------------------|
+|<new-mime>           |n         |compose new attachment using mailcap entry  |
+|---------------------+----------+--------------------------------------------|
+|<postpone-message>   |P         |save this message to send later             |
+|---------------------+----------+--------------------------------------------|
+|<edit-reply-to>      |r         |edit the Reply-To field                     |
+|---------------------+----------+--------------------------------------------|
+|<rename-file>        |R         |rename/move an attached file                |
+|---------------------+----------+--------------------------------------------|
+|<edit-subject>       |s         |edit the subject of this message            |
+|---------------------+----------+--------------------------------------------|
+|<edit-to>            |t         |edit the TO list                            |
+|---------------------+----------+--------------------------------------------|
+|<edit-type>          |^T        |edit attachment content type                |
+|---------------------+----------+--------------------------------------------|
+|<write-fcc>          |w         |write the message to a folder               |
+|---------------------+----------+--------------------------------------------|
+|<toggle-unlink>      |u         |toggle whether to delete file after sending |
+|                     |          |it                                          |
+|---------------------+----------+--------------------------------------------|
+|<toggle-recode>      |          |toggle recoding of this attachment          |
+|---------------------+----------+--------------------------------------------|
+|<update-encoding>    |U         |update an attachment's encoding info        |
+|---------------------+----------+--------------------------------------------|
+|<view-attach>        |<Return>  |view attachment using mailcap entry if      |
+|                     |          |necessary                                   |
+|---------------------+----------+--------------------------------------------|
+|<send-message>       |y         |send the message                            |
+|---------------------+----------+--------------------------------------------|
+|<pipe-entry>         ||         |pipe message/attachment to a shell command  |
+|---------------------+----------+--------------------------------------------|
+|<attach-key>         |Esc k     |attach a PGP public key                     |
+|---------------------+----------+--------------------------------------------|
+|<pgp-menu>           |p         |show PGP options                            |
+|---------------------+----------+--------------------------------------------|
+|<forget-passphrase>  |^F        |wipe passphrase(s) from memory              |
+|---------------------+----------+--------------------------------------------|
+|<smime-menu>         |S         |show S/MIME options                         |
+|---------------------+----------+--------------------------------------------|
+|<mix>                |M         |send the message through a mixmaster        |
+|                     |          |remailer chain                              |
++-----------------------------------------------------------------------------+
+
+
+4.8. Postpone Menu
+
+Table 9.9. Default postpone Function Bindings
+
++-------------------------------------------------------+
+|    Function    |Default key|       Description        |
+|----------------+-----------+--------------------------|
+|<delete-entry>  |d          |delete the current entry  |
+|----------------+-----------+--------------------------|
+|<undelete-entry>|u          |undelete the current entry|
++-------------------------------------------------------+
+
+
+4.9. Browser Menu
+
+Table 9.10. Default browser Function Bindings
+
++-----------------------------------------------------------------------------+
+|     Function      | Default  |                 Description                  |
+|                   |   key    |                                              |
+|-------------------+----------+----------------------------------------------|
+|<change-dir>       |c         |change directories                            |
+|-------------------+----------+----------------------------------------------|
+|<display-filename> |@         |display the currently selected file's name    |
+|-------------------+----------+----------------------------------------------|
+|<enter-mask>       |m         |enter a file mask                             |
+|-------------------+----------+----------------------------------------------|
+|<sort>             |o         |sort messages                                 |
+|-------------------+----------+----------------------------------------------|
+|<sort-reverse>     |O         |sort messages in reverse order                |
+|-------------------+----------+----------------------------------------------|
+|<select-new>       |N         |select a new file in this directory           |
+|-------------------+----------+----------------------------------------------|
+|<check-new>        |          |check mailboxes for new mail                  |
+|-------------------+----------+----------------------------------------------|
+|<toggle-mailboxes> |<Tab>     |toggle whether to browse mailboxes or all     |
+|                   |          |files                                         |
+|-------------------+----------+----------------------------------------------|
+|<view-file>        |<Space>   |view file                                     |
+|-------------------+----------+----------------------------------------------|
+|<buffy-list>       |.         |list mailboxes with new mail                  |
+|-------------------+----------+----------------------------------------------|
+|<create-mailbox>   |C         |create a new mailbox (IMAP only)              |
+|-------------------+----------+----------------------------------------------|
+|<delete-mailbox>   |d         |delete the current mailbox (IMAP only)        |
+|-------------------+----------+----------------------------------------------|
+|<rename-mailbox>   |r         |rename the current mailbox (IMAP only)        |
+|-------------------+----------+----------------------------------------------|
+|<subscribe>        |s         |subscribe to current mailbox (IMAP only)      |
+|-------------------+----------+----------------------------------------------|
+|<unsubscribe>      |u         |unsubscribe from current mailbox (IMAP only)  |
+|-------------------+----------+----------------------------------------------|
+|<toggle-subscribed>|T         |toggle view all/subscribed mailboxes (IMAP    |
+|                   |          |only)                                         |
++-----------------------------------------------------------------------------+
+
+
+4.10. Pgp Menu
+
+Table 9.11. Default pgp Function Bindings
+
++------------------------------------------------+
+|  Function  |Default key|      Description      |
+|------------+-----------+-----------------------|
+|<verify-key>|c          |verify a PGP public key|
+|------------+-----------+-----------------------|
+|<view-name> |%          |view the key's user id |
++------------------------------------------------+
+
+
+4.11. Smime Menu
+
+Table 9.12. Default smime Function Bindings
+
++------------------------------------------------+
+|  Function  |Default key|      Description      |
+|------------+-----------+-----------------------|
+|<verify-key>|c          |verify a PGP public key|
+|------------+-----------+-----------------------|
+|<view-name> |%          |view the key's user id |
++------------------------------------------------+
+
+
+4.12. Mix Menu
+
+Table 9.13. Default mix Function Bindings
+
++-----------------------------------------------------------------+
+|  Function  |Default key|              Description               |
+|------------+-----------+----------------------------------------|
+|<accept>    |<Return>   |Accept the chain constructed            |
+|------------+-----------+----------------------------------------|
+|<append>    |a          |Append a remailer to the chain          |
+|------------+-----------+----------------------------------------|
+|<insert>    |i          |Insert a remailer into the chain        |
+|------------+-----------+----------------------------------------|
+|<delete>    |d          |Delete a remailer from the chain        |
+|------------+-----------+----------------------------------------|
+|<chain-prev>|<Left>     |Select the previous element of the chain|
+|------------+-----------+----------------------------------------|
+|<chain-next>|<Right>    |Select the next element of the chain    |
++-----------------------------------------------------------------+
+
+
+4.13. Editor Menu
+
+Table 9.14. Default editor Function Bindings
+
++-----------------------------------------------------------------------------+
+|    Function     |Default key|                  Description                  |
+|-----------------+-----------+-----------------------------------------------|
+|<bol>            |^A         |jump to the beginning of the line              |
+|-----------------+-----------+-----------------------------------------------|
+|<backward-char>  |^B         |move the cursor one character to the left      |
+|-----------------+-----------+-----------------------------------------------|
+|<backward-word>  |Esc b      |move the cursor to the beginning of the word   |
+|-----------------+-----------+-----------------------------------------------|
+|<capitalize-word>|Esc c      |capitalize the word                            |
+|-----------------+-----------+-----------------------------------------------|
+|<downcase-word>  |Esc l      |convert the word to lower case                 |
+|-----------------+-----------+-----------------------------------------------|
+|<upcase-word>    |Esc u      |convert the word to upper case                 |
+|-----------------+-----------+-----------------------------------------------|
+|<delete-char>    |^D         |delete the char under the cursor               |
+|-----------------+-----------+-----------------------------------------------|
+|<eol>            |^E         |jump to the end of the line                    |
+|-----------------+-----------+-----------------------------------------------|
+|<forward-char>   |^F         |move the cursor one character to the right     |
+|-----------------+-----------+-----------------------------------------------|
+|<forward-word>   |Esc f      |move the cursor to the end of the word         |
+|-----------------+-----------+-----------------------------------------------|
+|<backspace>      |<Backspace>|delete the char in front of the cursor         |
+|-----------------+-----------+-----------------------------------------------|
+|<kill-eol>       |^K         |delete chars from cursor to end of line        |
+|-----------------+-----------+-----------------------------------------------|
+|<kill-eow>       |Esc d      |delete chars from the cursor to the end of the |
+|                 |           |word                                           |
+|-----------------+-----------+-----------------------------------------------|
+|<kill-line>      |^U         |delete all chars on the line                   |
+|-----------------+-----------+-----------------------------------------------|
+|<quote-char>     |^V         |quote the next typed key                       |
+|-----------------+-----------+-----------------------------------------------|
+|<kill-word>      |^W         |delete the word in front of the cursor         |
+|-----------------+-----------+-----------------------------------------------|
+|<complete>       |<Tab>      |complete filename or alias                     |
+|-----------------+-----------+-----------------------------------------------|
+|<complete-query> |^T         |complete address with query                    |
+|-----------------+-----------+-----------------------------------------------|
+|<buffy-cycle>    |<Space>    |cycle among incoming mailboxes                 |
+|-----------------+-----------+-----------------------------------------------|
+|<history-up>     |           |scroll up through the history list             |
+|-----------------+-----------+-----------------------------------------------|
+|<history-down>   |           |scroll down through the history list           |
+|-----------------+-----------+-----------------------------------------------|
+|<transpose-chars>|           |transpose character under cursor with previous |
++-----------------------------------------------------------------------------+
+
+
+Chapter 10. Miscellany

 
 Table of Contents
 
 1. Acknowledgements
 
 Table of Contents
 
 1. Acknowledgements

-2. About this document
+2. About This Document

 
 1. Acknowledgements
 
 
 1. Acknowledgements
 


@@ -9492,49 +10372,91 @@ back in the ELM-ME days.
 
 The following people have been very helpful to the development of Mutt:
 
 
 The following people have been very helpful to the development of Mutt:
 

-Vikas Agnihotri <vikasa@writeme.com>,
-Francois Berjon <Francois.Berjon@aar.alcatel-alsthom.fr>,
-Aric Blumer <aric@fore.com>,
-John Capo <jc@irbs.com>,
-David Champion <dgc@uchicago.edu>,
-Brendan Cully <brendan@kublai.com>,
-Liviu Daia <daia@stoilow.imar.ro>,
-Thomas E. Dickey <dickey@herndon4.his.com>,
-David DeSimone <fox@convex.hp.com>,
-Nickolay N. Dudorov <nnd@wint.itfs.nsk.su>,
-Ruslan Ermilov <ru@freebsd.org>,
-Edmund Grimley Evans <edmundo@rano.org>,
-Michael Finken <finken@conware.de>,
-Sven Guckes <guckes@math.fu-berlin.de>,
-Lars Hecking <lhecking@nmrc.ie>,
-Mark Holloman <holloman@nando.net>,
-Andreas Holzmann <holzmann@fmi.uni-passau.de>,
-Marco d'Itri <md@linux.it>,
-Björn Jacke <bjacke@suse.com>,
-Byrial Jensen <byrial@image.dk>,
-David Jeske <jeske@igcom.net>,
-Christophe Kalt <kalt@hugo.int-evry.fr>,
-Tommi Komulainen <Tommi.Komulainen@iki.fi>,
-Felix von Leitner (a.k.a ``Fefe'') <leitner@math.fu-berlin.de>,
-Brandon Long <blong@fiction.net>,
-Jimmy Mäkelä <jmy@flashback.net>,
-Lars Marowsky-Bree <lmb@pointer.in-minden.de>,
-Thomas ``Mike'' Michlmayr <mike@cosy.sbg.ac.at>,
-Andrew W. Nosenko <awn@bcs.zp.ua>,
-David O'Brien <obrien@Nuxi.cs.ucdavis.edu>,
-Clint Olsen <olsenc@ichips.intel.com>,
-Park Myeong Seok <pms@romance.kaist.ac.kr>,
-Thomas Parmelan <tom@ankh.fr.eu.org>,
-Ollivier Robert <roberto@keltia.freenix.fr>,
-Thomas Roessler <roessler@does-not-exist.org>,
-Roland Rosenfeld <roland@spinnaker.de>,
-TAKIZAWA Takashi <taki@luna.email.ne.jp>,
-Allain Thivillon <Allain.Thivillon@alma.fr>,
-Gero Treuner <gero@70t.de>,
-Vsevolod Volkov <vvv@lucky.net>,
-Ken Weinert <kenw@ihs.com>
-
-2. About this document
+  * Vikas Agnihotri <vikasa@writeme.com>
+
+  * Francois Berjon <Francois.Berjon@aar.alcatel-alsthom.fr>
+
+  * Aric Blumer <aric@fore.com>
+
+  * John Capo <jc@irbs.com>
+
+  * David Champion <dgc@uchicago.edu>
+
+  * Brendan Cully <brendan@kublai.com>
+
+  * Liviu Daia <daia@stoilow.imar.ro>
+
+  * Thomas E. Dickey <dickey@herndon4.his.com>
+
+  * David DeSimone <fox@convex.hp.com>
+
+  * Nickolay N. Dudorov <nnd@wint.itfs.nsk.su>
+
+  * Ruslan Ermilov <ru@freebsd.org>
+
+  * Edmund Grimley Evans <edmundo@rano.org>
+
+  * Michael Finken <finken@conware.de>
+
+  * Sven Guckes <guckes@math.fu-berlin.de>
+
+  * Lars Hecking <lhecking@nmrc.ie>
+
+  * Mark Holloman <holloman@nando.net>
+
+  * Andreas Holzmann <holzmann@fmi.uni-passau.de>
+
+  * Marco d'Itri <md@linux.it>
+
+  * Bj?rn Jacke <bjacke@suse.com>
+
+  * Byrial Jensen <byrial@image.dk>
+
+  * David Jeske <jeske@igcom.net>
+
+  * Christophe Kalt <kalt@hugo.int-evry.fr>
+
+  * Tommi Komulainen <Tommi.Komulainen@iki.fi>
+
+  * Felix von Leitner (a.k.a ?Fefe?) <leitner@math.fu-berlin.de>
+
+  * Brandon Long <blong@fiction.net>
+
+  * Jimmy M?kel? <jmy@flashback.net>
+
+  * Lars Marowsky-Bree <lmb@pointer.in-minden.de>
+
+  * Thomas ?Mike? Michlmayr <mike@cosy.sbg.ac.at>
+
+  * Andrew W. Nosenko <awn@bcs.zp.ua>
+
+  * David O'Brien <obrien@Nuxi.cs.ucdavis.edu>
+
+  * Clint Olsen <olsenc@ichips.intel.com>
+
+  * Park Myeong Seok <pms@romance.kaist.ac.kr>
+
+  * Thomas Parmelan <tom@ankh.fr.eu.org>
+
+  * Ollivier Robert <roberto@keltia.freenix.fr>
+
+  * Thomas Roessler <roessler@does-not-exist.org>
+
+  * Roland Rosenfeld <roland@spinnaker.de>
+
+  * Rocco Rutte <pdmef@gmx.net>
+
+  * TAKIZAWA Takashi <taki@luna.email.ne.jp>
+
+  * Allain Thivillon <Allain.Thivillon@alma.fr>
+
+  * Gero Treuner <gero@70t.de>
+
+  * Vsevolod Volkov <vvv@lucky.net>
+
+  * Ken Weinert <kenw@ihs.com>
+
+2. About This Document

 
 This document was written in DocBook, and then rendered using the Gnome XSLT
 toolkit.
 
 This document was written in DocBook, and then rendered using the Gnome XSLT
 toolkit.